| /* |
| * R-Car SYSC Power management support |
| * |
| * Copyright (C) 2014 Magnus Damm |
| * Copyright (C) 2015-2017 Glider bvba |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/clk/renesas.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/mm.h> |
| #include <linux/of_address.h> |
| #include <linux/pm_domain.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/io.h> |
| #include <linux/soc/renesas/rcar-sysc.h> |
| |
| #include "rcar-sysc.h" |
| |
| /* SYSC Common */ |
| #define SYSCSR 0x00 /* SYSC Status Register */ |
| #define SYSCISR 0x04 /* Interrupt Status Register */ |
| #define SYSCISCR 0x08 /* Interrupt Status Clear Register */ |
| #define SYSCIER 0x0c /* Interrupt Enable Register */ |
| #define SYSCIMR 0x10 /* Interrupt Mask Register */ |
| |
| /* SYSC Status Register */ |
| #define SYSCSR_PONENB 1 /* Ready for power resume requests */ |
| #define SYSCSR_POFFENB 0 /* Ready for power shutoff requests */ |
| |
| /* |
| * Power Control Register Offsets inside the register block for each domain |
| * Note: The "CR" registers for ARM cores exist on H1 only |
| * Use WFI to power off, CPG/APMU to resume ARM cores on R-Car Gen2 |
| * Use PSCI on R-Car Gen3 |
| */ |
| #define PWRSR_OFFS 0x00 /* Power Status Register */ |
| #define PWROFFCR_OFFS 0x04 /* Power Shutoff Control Register */ |
| #define PWROFFSR_OFFS 0x08 /* Power Shutoff Status Register */ |
| #define PWRONCR_OFFS 0x0c /* Power Resume Control Register */ |
| #define PWRONSR_OFFS 0x10 /* Power Resume Status Register */ |
| #define PWRER_OFFS 0x14 /* Power Shutoff/Resume Error */ |
| |
| |
| #define SYSCSR_RETRIES 100 |
| #define SYSCSR_DELAY_US 1 |
| |
| #define PWRER_RETRIES 100 |
| #define PWRER_DELAY_US 1 |
| |
| #define SYSCISR_RETRIES 1000 |
| #define SYSCISR_DELAY_US 1 |
| |
| #define RCAR_PD_ALWAYS_ON 32 /* Always-on power area */ |
| |
| static void __iomem *rcar_sysc_base; |
| static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */ |
| |
| static int rcar_sysc_pwr_on_off(const struct rcar_sysc_ch *sysc_ch, bool on) |
| { |
| unsigned int sr_bit, reg_offs; |
| int k; |
| |
| if (on) { |
| sr_bit = SYSCSR_PONENB; |
| reg_offs = PWRONCR_OFFS; |
| } else { |
| sr_bit = SYSCSR_POFFENB; |
| reg_offs = PWROFFCR_OFFS; |
| } |
| |
| /* Wait until SYSC is ready to accept a power request */ |
| for (k = 0; k < SYSCSR_RETRIES; k++) { |
| if (ioread32(rcar_sysc_base + SYSCSR) & BIT(sr_bit)) |
| break; |
| udelay(SYSCSR_DELAY_US); |
| } |
| |
| if (k == SYSCSR_RETRIES) |
| return -EAGAIN; |
| |
| /* Submit power shutoff or power resume request */ |
| iowrite32(BIT(sysc_ch->chan_bit), |
| rcar_sysc_base + sysc_ch->chan_offs + reg_offs); |
| |
| return 0; |
| } |
| |
| static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on) |
| { |
| unsigned int isr_mask = BIT(sysc_ch->isr_bit); |
| unsigned int chan_mask = BIT(sysc_ch->chan_bit); |
| unsigned int status; |
| unsigned long flags; |
| int ret = 0; |
| int k; |
| |
| spin_lock_irqsave(&rcar_sysc_lock, flags); |
| |
| iowrite32(isr_mask, rcar_sysc_base + SYSCISCR); |
| |
| /* Submit power shutoff or resume request until it was accepted */ |
| for (k = 0; k < PWRER_RETRIES; k++) { |
| ret = rcar_sysc_pwr_on_off(sysc_ch, on); |
| if (ret) |
| goto out; |
| |
| status = ioread32(rcar_sysc_base + |
| sysc_ch->chan_offs + PWRER_OFFS); |
| if (!(status & chan_mask)) |
| break; |
| |
| udelay(PWRER_DELAY_US); |
| } |
| |
| if (k == PWRER_RETRIES) { |
| ret = -EIO; |
| goto out; |
| } |
| |
| /* Wait until the power shutoff or resume request has completed * */ |
| for (k = 0; k < SYSCISR_RETRIES; k++) { |
| if (ioread32(rcar_sysc_base + SYSCISR) & isr_mask) |
| break; |
| udelay(SYSCISR_DELAY_US); |
| } |
| |
| if (k == SYSCISR_RETRIES) |
| ret = -EIO; |
| |
| iowrite32(isr_mask, rcar_sysc_base + SYSCISCR); |
| |
| out: |
| spin_unlock_irqrestore(&rcar_sysc_lock, flags); |
| |
| pr_debug("sysc power %s domain %d: %08x -> %d\n", on ? "on" : "off", |
| sysc_ch->isr_bit, ioread32(rcar_sysc_base + SYSCISR), ret); |
| return ret; |
| } |
| |
| int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch) |
| { |
| return rcar_sysc_power(sysc_ch, false); |
| } |
| |
| int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch) |
| { |
| return rcar_sysc_power(sysc_ch, true); |
| } |
| |
| static bool rcar_sysc_power_is_off(const struct rcar_sysc_ch *sysc_ch) |
| { |
| unsigned int st; |
| |
| st = ioread32(rcar_sysc_base + sysc_ch->chan_offs + PWRSR_OFFS); |
| if (st & BIT(sysc_ch->chan_bit)) |
| return true; |
| |
| return false; |
| } |
| |
| struct rcar_sysc_pd { |
| struct generic_pm_domain genpd; |
| struct rcar_sysc_ch ch; |
| unsigned int flags; |
| char name[0]; |
| }; |
| |
| static inline struct rcar_sysc_pd *to_rcar_pd(struct generic_pm_domain *d) |
| { |
| return container_of(d, struct rcar_sysc_pd, genpd); |
| } |
| |
| static int rcar_sysc_pd_power_off(struct generic_pm_domain *genpd) |
| { |
| struct rcar_sysc_pd *pd = to_rcar_pd(genpd); |
| |
| pr_debug("%s: %s\n", __func__, genpd->name); |
| return rcar_sysc_power_down(&pd->ch); |
| } |
| |
| static int rcar_sysc_pd_power_on(struct generic_pm_domain *genpd) |
| { |
| struct rcar_sysc_pd *pd = to_rcar_pd(genpd); |
| |
| pr_debug("%s: %s\n", __func__, genpd->name); |
| return rcar_sysc_power_up(&pd->ch); |
| } |
| |
| static bool has_cpg_mstp; |
| |
| static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) |
| { |
| struct generic_pm_domain *genpd = &pd->genpd; |
| const char *name = pd->genpd.name; |
| struct dev_power_governor *gov = &simple_qos_governor; |
| |
| if (pd->flags & PD_CPU) { |
| /* |
| * This domain contains a CPU core and therefore it should |
| * only be turned off if the CPU is not in use. |
| */ |
| pr_debug("PM domain %s contains %s\n", name, "CPU"); |
| genpd->flags |= GENPD_FLAG_ALWAYS_ON; |
| } else if (pd->flags & PD_SCU) { |
| /* |
| * This domain contains an SCU and cache-controller, and |
| * therefore it should only be turned off if the CPU cores are |
| * not in use. |
| */ |
| pr_debug("PM domain %s contains %s\n", name, "SCU"); |
| genpd->flags |= GENPD_FLAG_ALWAYS_ON; |
| } else if (pd->flags & PD_NO_CR) { |
| /* |
| * This domain cannot be turned off. |
| */ |
| genpd->flags |= GENPD_FLAG_ALWAYS_ON; |
| } |
| |
| if (!(pd->flags & (PD_CPU | PD_SCU))) { |
| /* Enable Clock Domain for I/O devices */ |
| genpd->flags |= GENPD_FLAG_PM_CLK; |
| if (has_cpg_mstp) { |
| genpd->attach_dev = cpg_mstp_attach_dev; |
| genpd->detach_dev = cpg_mstp_detach_dev; |
| } else { |
| genpd->attach_dev = cpg_mssr_attach_dev; |
| genpd->detach_dev = cpg_mssr_detach_dev; |
| } |
| } |
| |
| genpd->power_off = rcar_sysc_pd_power_off; |
| genpd->power_on = rcar_sysc_pd_power_on; |
| |
| if (pd->flags & (PD_CPU | PD_NO_CR)) { |
| /* Skip CPUs (handled by SMP code) and areas without control */ |
| pr_debug("%s: Not touching %s\n", __func__, genpd->name); |
| goto finalize; |
| } |
| |
| if (!rcar_sysc_power_is_off(&pd->ch)) { |
| pr_debug("%s: %s is already powered\n", __func__, genpd->name); |
| goto finalize; |
| } |
| |
| rcar_sysc_power_up(&pd->ch); |
| |
| finalize: |
| pm_genpd_init(genpd, gov, false); |
| } |
| |
| static const struct of_device_id rcar_sysc_matches[] = { |
| #ifdef CONFIG_SYSC_R8A7743 |
| { .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info }, |
| #endif |
| #ifdef CONFIG_SYSC_R8A7745 |
| { .compatible = "renesas,r8a7745-sysc", .data = &r8a7745_sysc_info }, |
| #endif |
| #ifdef CONFIG_SYSC_R8A7779 |
| { .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info }, |
| #endif |
| #ifdef CONFIG_SYSC_R8A7790 |
| { .compatible = "renesas,r8a7790-sysc", .data = &r8a7790_sysc_info }, |
| #endif |
| #ifdef CONFIG_SYSC_R8A7791 |
| { .compatible = "renesas,r8a7791-sysc", .data = &r8a7791_sysc_info }, |
| /* R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. */ |
| { .compatible = "renesas,r8a7793-sysc", .data = &r8a7791_sysc_info }, |
| #endif |
| #ifdef CONFIG_SYSC_R8A7792 |
| { .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info }, |
| #endif |
| #ifdef CONFIG_SYSC_R8A7794 |
| { .compatible = "renesas,r8a7794-sysc", .data = &r8a7794_sysc_info }, |
| #endif |
| #ifdef CONFIG_SYSC_R8A7795 |
| { .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info }, |
| #endif |
| #ifdef CONFIG_SYSC_R8A7796 |
| { .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info }, |
| #endif |
| #ifdef CONFIG_SYSC_R8A77995 |
| { .compatible = "renesas,r8a77995-sysc", .data = &r8a77995_sysc_info }, |
| #endif |
| { /* sentinel */ } |
| }; |
| |
| struct rcar_pm_domains { |
| struct genpd_onecell_data onecell_data; |
| struct generic_pm_domain *domains[RCAR_PD_ALWAYS_ON + 1]; |
| }; |
| |
| static int __init rcar_sysc_pd_init(void) |
| { |
| const struct rcar_sysc_info *info; |
| const struct of_device_id *match; |
| struct rcar_pm_domains *domains; |
| struct device_node *np; |
| u32 syscier, syscimr; |
| void __iomem *base; |
| unsigned int i; |
| int error; |
| |
| if (rcar_sysc_base) |
| return 0; |
| |
| np = of_find_matching_node_and_match(NULL, rcar_sysc_matches, &match); |
| if (!np) |
| return -ENODEV; |
| |
| info = match->data; |
| |
| if (info->init) { |
| error = info->init(); |
| if (error) |
| return error; |
| } |
| |
| has_cpg_mstp = of_find_compatible_node(NULL, NULL, |
| "renesas,cpg-mstp-clocks"); |
| |
| base = of_iomap(np, 0); |
| if (!base) { |
| pr_warn("%pOF: Cannot map regs\n", np); |
| error = -ENOMEM; |
| goto out_put; |
| } |
| |
| rcar_sysc_base = base; |
| |
| domains = kzalloc(sizeof(*domains), GFP_KERNEL); |
| if (!domains) { |
| error = -ENOMEM; |
| goto out_put; |
| } |
| |
| domains->onecell_data.domains = domains->domains; |
| domains->onecell_data.num_domains = ARRAY_SIZE(domains->domains); |
| |
| for (i = 0, syscier = 0; i < info->num_areas; i++) |
| syscier |= BIT(info->areas[i].isr_bit); |
| |
| /* |
| * Mask all interrupt sources to prevent the CPU from receiving them. |
| * Make sure not to clear reserved bits that were set before. |
| */ |
| syscimr = ioread32(base + SYSCIMR); |
| syscimr |= syscier; |
| pr_debug("%pOF: syscimr = 0x%08x\n", np, syscimr); |
| iowrite32(syscimr, base + SYSCIMR); |
| |
| /* |
| * SYSC needs all interrupt sources enabled to control power. |
| */ |
| pr_debug("%pOF: syscier = 0x%08x\n", np, syscier); |
| iowrite32(syscier, base + SYSCIER); |
| |
| for (i = 0; i < info->num_areas; i++) { |
| const struct rcar_sysc_area *area = &info->areas[i]; |
| struct rcar_sysc_pd *pd; |
| |
| if (!area->name) { |
| /* Skip NULLified area */ |
| continue; |
| } |
| |
| pd = kzalloc(sizeof(*pd) + strlen(area->name) + 1, GFP_KERNEL); |
| if (!pd) { |
| error = -ENOMEM; |
| goto out_put; |
| } |
| |
| strcpy(pd->name, area->name); |
| pd->genpd.name = pd->name; |
| pd->ch.chan_offs = area->chan_offs; |
| pd->ch.chan_bit = area->chan_bit; |
| pd->ch.isr_bit = area->isr_bit; |
| pd->flags = area->flags; |
| |
| rcar_sysc_pd_setup(pd); |
| if (area->parent >= 0) |
| pm_genpd_add_subdomain(domains->domains[area->parent], |
| &pd->genpd); |
| |
| domains->domains[area->isr_bit] = &pd->genpd; |
| } |
| |
| error = of_genpd_add_provider_onecell(np, &domains->onecell_data); |
| |
| out_put: |
| of_node_put(np); |
| return error; |
| } |
| early_initcall(rcar_sysc_pd_init); |
| |
| void __init rcar_sysc_nullify(struct rcar_sysc_area *areas, |
| unsigned int num_areas, u8 id) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < num_areas; i++) |
| if (areas[i].isr_bit == id) { |
| areas[i].name = NULL; |
| return; |
| } |
| } |
| |
| void __init rcar_sysc_init(phys_addr_t base, u32 syscier) |
| { |
| u32 syscimr; |
| |
| if (!rcar_sysc_pd_init()) |
| return; |
| |
| rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE); |
| |
| /* |
| * Mask all interrupt sources to prevent the CPU from receiving them. |
| * Make sure not to clear reserved bits that were set before. |
| */ |
| syscimr = ioread32(rcar_sysc_base + SYSCIMR); |
| syscimr |= syscier; |
| pr_debug("%s: syscimr = 0x%08x\n", __func__, syscimr); |
| iowrite32(syscimr, rcar_sysc_base + SYSCIMR); |
| |
| /* |
| * SYSC needs all interrupt sources enabled to control power. |
| */ |
| pr_debug("%s: syscier = 0x%08x\n", __func__, syscier); |
| iowrite32(syscier, rcar_sysc_base + SYSCIER); |
| } |