| /* |
| * RapidIO Tsi57x switch family support |
| * |
| * Copyright 2009-2010 Integrated Device Technology, Inc. |
| * Alexandre Bounine <alexandre.bounine@idt.com> |
| * - Added EM support |
| * - Modified switch operations initialization. |
| * |
| * Copyright 2005 MontaVista Software, Inc. |
| * Matt Porter <mporter@kernel.crashing.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/rio.h> |
| #include <linux/rio_drv.h> |
| #include <linux/rio_ids.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include "../rio.h" |
| |
| /* Global (broadcast) route registers */ |
| #define SPBC_ROUTE_CFG_DESTID 0x10070 |
| #define SPBC_ROUTE_CFG_PORT 0x10074 |
| |
| /* Per port route registers */ |
| #define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n) |
| #define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n) |
| |
| #define TSI578_SP_MODE(n) (0x11004 + n*0x100) |
| #define TSI578_SP_MODE_GLBL 0x10004 |
| #define TSI578_SP_MODE_PW_DIS 0x08000000 |
| #define TSI578_SP_MODE_LUT_512 0x01000000 |
| |
| #define TSI578_SP_CTL_INDEP(n) (0x13004 + n*0x100) |
| #define TSI578_SP_LUT_PEINF(n) (0x13010 + n*0x100) |
| #define TSI578_SP_CS_TX(n) (0x13014 + n*0x100) |
| #define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100) |
| |
| #define TSI578_GLBL_ROUTE_BASE 0x10078 |
| |
| static int |
| tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u16 table, u16 route_destid, u8 route_port) |
| { |
| if (table == RIO_GLOBAL_TABLE) { |
| rio_mport_write_config_32(mport, destid, hopcount, |
| SPBC_ROUTE_CFG_DESTID, route_destid); |
| rio_mport_write_config_32(mport, destid, hopcount, |
| SPBC_ROUTE_CFG_PORT, route_port); |
| } else { |
| rio_mport_write_config_32(mport, destid, hopcount, |
| SPP_ROUTE_CFG_DESTID(table), route_destid); |
| rio_mport_write_config_32(mport, destid, hopcount, |
| SPP_ROUTE_CFG_PORT(table), route_port); |
| } |
| |
| udelay(10); |
| |
| return 0; |
| } |
| |
| static int |
| tsi57x_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u16 table, u16 route_destid, u8 *route_port) |
| { |
| int ret = 0; |
| u32 result; |
| |
| if (table == RIO_GLOBAL_TABLE) { |
| /* Use local RT of the ingress port to avoid possible |
| race condition */ |
| rio_mport_read_config_32(mport, destid, hopcount, |
| RIO_SWP_INFO_CAR, &result); |
| table = (result & RIO_SWP_INFO_PORT_NUM_MASK); |
| } |
| |
| rio_mport_write_config_32(mport, destid, hopcount, |
| SPP_ROUTE_CFG_DESTID(table), route_destid); |
| rio_mport_read_config_32(mport, destid, hopcount, |
| SPP_ROUTE_CFG_PORT(table), &result); |
| |
| *route_port = (u8)result; |
| if (*route_port > 15) |
| ret = -1; |
| |
| return ret; |
| } |
| |
| static int |
| tsi57x_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u16 table) |
| { |
| u32 route_idx; |
| u32 lut_size; |
| |
| lut_size = (mport->sys_size) ? 0x1ff : 0xff; |
| |
| if (table == RIO_GLOBAL_TABLE) { |
| rio_mport_write_config_32(mport, destid, hopcount, |
| SPBC_ROUTE_CFG_DESTID, 0x80000000); |
| for (route_idx = 0; route_idx <= lut_size; route_idx++) |
| rio_mport_write_config_32(mport, destid, hopcount, |
| SPBC_ROUTE_CFG_PORT, |
| RIO_INVALID_ROUTE); |
| } else { |
| rio_mport_write_config_32(mport, destid, hopcount, |
| SPP_ROUTE_CFG_DESTID(table), 0x80000000); |
| for (route_idx = 0; route_idx <= lut_size; route_idx++) |
| rio_mport_write_config_32(mport, destid, hopcount, |
| SPP_ROUTE_CFG_PORT(table) , RIO_INVALID_ROUTE); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| tsi57x_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u8 sw_domain) |
| { |
| u32 regval; |
| |
| /* |
| * Switch domain configuration operates only at global level |
| */ |
| |
| /* Turn off flat (LUT_512) mode */ |
| rio_mport_read_config_32(mport, destid, hopcount, |
| TSI578_SP_MODE_GLBL, ®val); |
| rio_mport_write_config_32(mport, destid, hopcount, TSI578_SP_MODE_GLBL, |
| regval & ~TSI578_SP_MODE_LUT_512); |
| /* Set switch domain base */ |
| rio_mport_write_config_32(mport, destid, hopcount, |
| TSI578_GLBL_ROUTE_BASE, |
| (u32)(sw_domain << 24)); |
| return 0; |
| } |
| |
| static int |
| tsi57x_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, |
| u8 *sw_domain) |
| { |
| u32 regval; |
| |
| /* |
| * Switch domain configuration operates only at global level |
| */ |
| rio_mport_read_config_32(mport, destid, hopcount, |
| TSI578_GLBL_ROUTE_BASE, ®val); |
| |
| *sw_domain = (u8)(regval >> 24); |
| |
| return 0; |
| } |
| |
| static int |
| tsi57x_em_init(struct rio_dev *rdev) |
| { |
| u32 regval; |
| int portnum; |
| |
| pr_debug("TSI578 %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); |
| |
| for (portnum = 0; |
| portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) { |
| /* Make sure that Port-Writes are enabled (for all ports) */ |
| rio_read_config_32(rdev, |
| TSI578_SP_MODE(portnum), ®val); |
| rio_write_config_32(rdev, |
| TSI578_SP_MODE(portnum), |
| regval & ~TSI578_SP_MODE_PW_DIS); |
| |
| /* Clear all pending interrupts */ |
| rio_read_config_32(rdev, |
| RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), |
| ®val); |
| rio_write_config_32(rdev, |
| RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), |
| regval & 0x07120214); |
| |
| rio_read_config_32(rdev, |
| TSI578_SP_INT_STATUS(portnum), ®val); |
| rio_write_config_32(rdev, |
| TSI578_SP_INT_STATUS(portnum), |
| regval & 0x000700bd); |
| |
| /* Enable all interrupts to allow ports to send a port-write */ |
| rio_read_config_32(rdev, |
| TSI578_SP_CTL_INDEP(portnum), ®val); |
| rio_write_config_32(rdev, |
| TSI578_SP_CTL_INDEP(portnum), |
| regval | 0x000b0000); |
| |
| /* Skip next (odd) port if the current port is in x4 mode */ |
| rio_read_config_32(rdev, |
| RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), |
| ®val); |
| if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4) |
| portnum++; |
| } |
| |
| /* set TVAL = ~50us */ |
| rio_write_config_32(rdev, |
| rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x9a << 8); |
| |
| return 0; |
| } |
| |
| static int |
| tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) |
| { |
| struct rio_mport *mport = rdev->net->hport; |
| u32 intstat, err_status; |
| int sendcount, checkcount; |
| u8 route_port; |
| u32 regval; |
| |
| rio_read_config_32(rdev, |
| RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), |
| &err_status); |
| |
| if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) && |
| (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | |
| RIO_PORT_N_ERR_STS_INP_ES))) { |
| /* Remove any queued packets by locking/unlocking port */ |
| rio_read_config_32(rdev, |
| RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), |
| ®val); |
| if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) { |
| rio_write_config_32(rdev, |
| RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), |
| regval | RIO_PORT_N_CTL_LOCKOUT); |
| udelay(50); |
| rio_write_config_32(rdev, |
| RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), |
| regval); |
| } |
| |
| /* Read from link maintenance response register to clear |
| * valid bit |
| */ |
| rio_read_config_32(rdev, |
| RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, portnum), |
| ®val); |
| |
| /* Send a Packet-Not-Accepted/Link-Request-Input-Status control |
| * symbol to recover from IES/OES |
| */ |
| sendcount = 3; |
| while (sendcount) { |
| rio_write_config_32(rdev, |
| TSI578_SP_CS_TX(portnum), 0x40fc8000); |
| checkcount = 3; |
| while (checkcount--) { |
| udelay(50); |
| rio_read_config_32(rdev, |
| RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, |
| portnum), |
| ®val); |
| if (regval & RIO_PORT_N_MNT_RSP_RVAL) |
| goto exit_es; |
| } |
| |
| sendcount--; |
| } |
| } |
| |
| exit_es: |
| /* Clear implementation specific error status bits */ |
| rio_read_config_32(rdev, TSI578_SP_INT_STATUS(portnum), &intstat); |
| pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n", |
| rdev->destid, rdev->hopcount, portnum, intstat); |
| |
| if (intstat & 0x10000) { |
| rio_read_config_32(rdev, |
| TSI578_SP_LUT_PEINF(portnum), ®val); |
| regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24); |
| route_port = rdev->rswitch->route_table[regval]; |
| pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n", |
| rio_name(rdev), portnum, regval); |
| tsi57x_route_add_entry(mport, rdev->destid, rdev->hopcount, |
| RIO_GLOBAL_TABLE, regval, route_port); |
| } |
| |
| rio_write_config_32(rdev, TSI578_SP_INT_STATUS(portnum), |
| intstat & 0x000700bd); |
| |
| return 0; |
| } |
| |
| static struct rio_switch_ops tsi57x_switch_ops = { |
| .owner = THIS_MODULE, |
| .add_entry = tsi57x_route_add_entry, |
| .get_entry = tsi57x_route_get_entry, |
| .clr_table = tsi57x_route_clr_table, |
| .set_domain = tsi57x_set_domain, |
| .get_domain = tsi57x_get_domain, |
| .em_init = tsi57x_em_init, |
| .em_handle = tsi57x_em_handler, |
| }; |
| |
| static int tsi57x_probe(struct rio_dev *rdev, const struct rio_device_id *id) |
| { |
| pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); |
| |
| spin_lock(&rdev->rswitch->lock); |
| |
| if (rdev->rswitch->ops) { |
| spin_unlock(&rdev->rswitch->lock); |
| return -EINVAL; |
| } |
| rdev->rswitch->ops = &tsi57x_switch_ops; |
| |
| if (rdev->do_enum) { |
| /* Ensure that default routing is disabled on startup */ |
| rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT, |
| RIO_INVALID_ROUTE); |
| } |
| |
| spin_unlock(&rdev->rswitch->lock); |
| return 0; |
| } |
| |
| static void tsi57x_remove(struct rio_dev *rdev) |
| { |
| pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); |
| spin_lock(&rdev->rswitch->lock); |
| if (rdev->rswitch->ops != &tsi57x_switch_ops) { |
| spin_unlock(&rdev->rswitch->lock); |
| return; |
| } |
| rdev->rswitch->ops = NULL; |
| spin_unlock(&rdev->rswitch->lock); |
| } |
| |
| static struct rio_device_id tsi57x_id_table[] = { |
| {RIO_DEVICE(RIO_DID_TSI572, RIO_VID_TUNDRA)}, |
| {RIO_DEVICE(RIO_DID_TSI574, RIO_VID_TUNDRA)}, |
| {RIO_DEVICE(RIO_DID_TSI577, RIO_VID_TUNDRA)}, |
| {RIO_DEVICE(RIO_DID_TSI578, RIO_VID_TUNDRA)}, |
| { 0, } /* terminate list */ |
| }; |
| |
| static struct rio_driver tsi57x_driver = { |
| .name = "tsi57x", |
| .id_table = tsi57x_id_table, |
| .probe = tsi57x_probe, |
| .remove = tsi57x_remove, |
| }; |
| |
| static int __init tsi57x_init(void) |
| { |
| return rio_register_driver(&tsi57x_driver); |
| } |
| |
| static void __exit tsi57x_exit(void) |
| { |
| rio_unregister_driver(&tsi57x_driver); |
| } |
| |
| device_initcall(tsi57x_init); |
| module_exit(tsi57x_exit); |
| |
| MODULE_DESCRIPTION("IDT Tsi57x Serial RapidIO switch family driver"); |
| MODULE_AUTHOR("Integrated Device Technology, Inc."); |
| MODULE_LICENSE("GPL"); |