| /* |
| * Driver for Atmel Pulse Width Modulation Controller |
| * |
| * Copyright (C) 2013 Atmel Corporation |
| * Bo Shen <voice.shen@atmel.com> |
| * |
| * Licensed under GPLv2. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/slab.h> |
| |
| /* The following is global registers for PWM controller */ |
| #define PWM_ENA 0x04 |
| #define PWM_DIS 0x08 |
| #define PWM_SR 0x0C |
| #define PWM_ISR 0x1C |
| /* Bit field in SR */ |
| #define PWM_SR_ALL_CH_ON 0x0F |
| |
| /* The following register is PWM channel related registers */ |
| #define PWM_CH_REG_OFFSET 0x200 |
| #define PWM_CH_REG_SIZE 0x20 |
| |
| #define PWM_CMR 0x0 |
| /* Bit field in CMR */ |
| #define PWM_CMR_CPOL (1 << 9) |
| #define PWM_CMR_UPD_CDTY (1 << 10) |
| #define PWM_CMR_CPRE_MSK 0xF |
| |
| /* The following registers for PWM v1 */ |
| #define PWMV1_CDTY 0x04 |
| #define PWMV1_CPRD 0x08 |
| #define PWMV1_CUPD 0x10 |
| |
| /* The following registers for PWM v2 */ |
| #define PWMV2_CDTY 0x04 |
| #define PWMV2_CDTYUPD 0x08 |
| #define PWMV2_CPRD 0x0C |
| #define PWMV2_CPRDUPD 0x10 |
| |
| /* |
| * Max value for duty and period |
| * |
| * Although the duty and period register is 32 bit, |
| * however only the LSB 16 bits are significant. |
| */ |
| #define PWM_MAX_DTY 0xFFFF |
| #define PWM_MAX_PRD 0xFFFF |
| #define PRD_MAX_PRES 10 |
| |
| struct atmel_pwm_registers { |
| u8 period; |
| u8 period_upd; |
| u8 duty; |
| u8 duty_upd; |
| }; |
| |
| struct atmel_pwm_chip { |
| struct pwm_chip chip; |
| struct clk *clk; |
| void __iomem *base; |
| const struct atmel_pwm_registers *regs; |
| |
| unsigned int updated_pwms; |
| /* ISR is cleared when read, ensure only one thread does that */ |
| struct mutex isr_lock; |
| }; |
| |
| static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct atmel_pwm_chip, chip); |
| } |
| |
| static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip, |
| unsigned long offset) |
| { |
| return readl_relaxed(chip->base + offset); |
| } |
| |
| static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip, |
| unsigned long offset, unsigned long val) |
| { |
| writel_relaxed(val, chip->base + offset); |
| } |
| |
| static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip, |
| unsigned int ch, unsigned long offset) |
| { |
| unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; |
| |
| return readl_relaxed(chip->base + base + offset); |
| } |
| |
| static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip, |
| unsigned int ch, unsigned long offset, |
| unsigned long val) |
| { |
| unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; |
| |
| writel_relaxed(val, chip->base + base + offset); |
| } |
| |
| static int atmel_pwm_calculate_cprd_and_pres(struct pwm_chip *chip, |
| const struct pwm_state *state, |
| unsigned long *cprd, u32 *pres) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| unsigned long long cycles = state->period; |
| |
| /* Calculate the period cycles and prescale value */ |
| cycles *= clk_get_rate(atmel_pwm->clk); |
| do_div(cycles, NSEC_PER_SEC); |
| |
| for (*pres = 0; cycles > PWM_MAX_PRD; cycles >>= 1) |
| (*pres)++; |
| |
| if (*pres > PRD_MAX_PRES) { |
| dev_err(chip->dev, "pres exceeds the maximum value\n"); |
| return -EINVAL; |
| } |
| |
| *cprd = cycles; |
| |
| return 0; |
| } |
| |
| static void atmel_pwm_calculate_cdty(const struct pwm_state *state, |
| unsigned long cprd, unsigned long *cdty) |
| { |
| unsigned long long cycles = state->duty_cycle; |
| |
| cycles *= cprd; |
| do_div(cycles, state->period); |
| *cdty = cprd - cycles; |
| } |
| |
| static void atmel_pwm_update_cdty(struct pwm_chip *chip, struct pwm_device *pwm, |
| unsigned long cdty) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| u32 val; |
| |
| if (atmel_pwm->regs->duty_upd == |
| atmel_pwm->regs->period_upd) { |
| val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); |
| val &= ~PWM_CMR_UPD_CDTY; |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); |
| } |
| |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, |
| atmel_pwm->regs->duty_upd, cdty); |
| } |
| |
| static void atmel_pwm_set_cprd_cdty(struct pwm_chip *chip, |
| struct pwm_device *pwm, |
| unsigned long cprd, unsigned long cdty) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, |
| atmel_pwm->regs->duty, cdty); |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, |
| atmel_pwm->regs->period, cprd); |
| } |
| |
| static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm, |
| bool disable_clk) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| unsigned long timeout = jiffies + 2 * HZ; |
| |
| /* |
| * Wait for at least a complete period to have passed before disabling a |
| * channel to be sure that CDTY has been updated |
| */ |
| mutex_lock(&atmel_pwm->isr_lock); |
| atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR); |
| |
| while (!(atmel_pwm->updated_pwms & (1 << pwm->hwpwm)) && |
| time_before(jiffies, timeout)) { |
| usleep_range(10, 100); |
| atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR); |
| } |
| |
| mutex_unlock(&atmel_pwm->isr_lock); |
| atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm); |
| |
| /* |
| * Wait for the PWM channel disable operation to be effective before |
| * stopping the clock. |
| */ |
| timeout = jiffies + 2 * HZ; |
| |
| while ((atmel_pwm_readl(atmel_pwm, PWM_SR) & (1 << pwm->hwpwm)) && |
| time_before(jiffies, timeout)) |
| usleep_range(10, 100); |
| |
| if (disable_clk) |
| clk_disable(atmel_pwm->clk); |
| } |
| |
| static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| struct pwm_state *state) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| struct pwm_state cstate; |
| unsigned long cprd, cdty; |
| u32 pres, val; |
| int ret; |
| |
| pwm_get_state(pwm, &cstate); |
| |
| if (state->enabled) { |
| if (cstate.enabled && |
| cstate.polarity == state->polarity && |
| cstate.period == state->period) { |
| cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, |
| atmel_pwm->regs->period); |
| atmel_pwm_calculate_cdty(state, cprd, &cdty); |
| atmel_pwm_update_cdty(chip, pwm, cdty); |
| return 0; |
| } |
| |
| ret = atmel_pwm_calculate_cprd_and_pres(chip, state, &cprd, |
| &pres); |
| if (ret) { |
| dev_err(chip->dev, |
| "failed to calculate cprd and prescaler\n"); |
| return ret; |
| } |
| |
| atmel_pwm_calculate_cdty(state, cprd, &cdty); |
| |
| if (cstate.enabled) { |
| atmel_pwm_disable(chip, pwm, false); |
| } else { |
| ret = clk_enable(atmel_pwm->clk); |
| if (ret) { |
| dev_err(chip->dev, "failed to enable clock\n"); |
| return ret; |
| } |
| } |
| |
| /* It is necessary to preserve CPOL, inside CMR */ |
| val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); |
| val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK); |
| if (state->polarity == PWM_POLARITY_NORMAL) |
| val &= ~PWM_CMR_CPOL; |
| else |
| val |= PWM_CMR_CPOL; |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); |
| atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty); |
| mutex_lock(&atmel_pwm->isr_lock); |
| atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR); |
| atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm); |
| mutex_unlock(&atmel_pwm->isr_lock); |
| atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm); |
| } else if (cstate.enabled) { |
| atmel_pwm_disable(chip, pwm, true); |
| } |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops atmel_pwm_ops = { |
| .apply = atmel_pwm_apply, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct atmel_pwm_registers atmel_pwm_regs_v1 = { |
| .period = PWMV1_CPRD, |
| .period_upd = PWMV1_CUPD, |
| .duty = PWMV1_CDTY, |
| .duty_upd = PWMV1_CUPD, |
| }; |
| |
| static const struct atmel_pwm_registers atmel_pwm_regs_v2 = { |
| .period = PWMV2_CPRD, |
| .period_upd = PWMV2_CPRDUPD, |
| .duty = PWMV2_CDTY, |
| .duty_upd = PWMV2_CDTYUPD, |
| }; |
| |
| static const struct platform_device_id atmel_pwm_devtypes[] = { |
| { |
| .name = "at91sam9rl-pwm", |
| .driver_data = (kernel_ulong_t)&atmel_pwm_regs_v1, |
| }, { |
| .name = "sama5d3-pwm", |
| .driver_data = (kernel_ulong_t)&atmel_pwm_regs_v2, |
| }, { |
| /* sentinel */ |
| }, |
| }; |
| MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes); |
| |
| static const struct of_device_id atmel_pwm_dt_ids[] = { |
| { |
| .compatible = "atmel,at91sam9rl-pwm", |
| .data = &atmel_pwm_regs_v1, |
| }, { |
| .compatible = "atmel,sama5d3-pwm", |
| .data = &atmel_pwm_regs_v2, |
| }, { |
| .compatible = "atmel,sama5d2-pwm", |
| .data = &atmel_pwm_regs_v2, |
| }, { |
| /* sentinel */ |
| }, |
| }; |
| MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids); |
| |
| static inline const struct atmel_pwm_registers * |
| atmel_pwm_get_driver_data(struct platform_device *pdev) |
| { |
| const struct platform_device_id *id; |
| |
| if (pdev->dev.of_node) |
| return of_device_get_match_data(&pdev->dev); |
| |
| id = platform_get_device_id(pdev); |
| |
| return (struct atmel_pwm_registers *)id->driver_data; |
| } |
| |
| static int atmel_pwm_probe(struct platform_device *pdev) |
| { |
| const struct atmel_pwm_registers *regs; |
| struct atmel_pwm_chip *atmel_pwm; |
| struct resource *res; |
| int ret; |
| |
| regs = atmel_pwm_get_driver_data(pdev); |
| if (!regs) |
| return -ENODEV; |
| |
| atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL); |
| if (!atmel_pwm) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(atmel_pwm->base)) |
| return PTR_ERR(atmel_pwm->base); |
| |
| atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(atmel_pwm->clk)) |
| return PTR_ERR(atmel_pwm->clk); |
| |
| ret = clk_prepare(atmel_pwm->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to prepare PWM clock\n"); |
| return ret; |
| } |
| |
| atmel_pwm->chip.dev = &pdev->dev; |
| atmel_pwm->chip.ops = &atmel_pwm_ops; |
| |
| if (pdev->dev.of_node) { |
| atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags; |
| atmel_pwm->chip.of_pwm_n_cells = 3; |
| } |
| |
| atmel_pwm->chip.base = -1; |
| atmel_pwm->chip.npwm = 4; |
| atmel_pwm->regs = regs; |
| atmel_pwm->updated_pwms = 0; |
| mutex_init(&atmel_pwm->isr_lock); |
| |
| ret = pwmchip_add(&atmel_pwm->chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret); |
| goto unprepare_clk; |
| } |
| |
| platform_set_drvdata(pdev, atmel_pwm); |
| |
| return ret; |
| |
| unprepare_clk: |
| clk_unprepare(atmel_pwm->clk); |
| return ret; |
| } |
| |
| static int atmel_pwm_remove(struct platform_device *pdev) |
| { |
| struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev); |
| |
| clk_unprepare(atmel_pwm->clk); |
| mutex_destroy(&atmel_pwm->isr_lock); |
| |
| return pwmchip_remove(&atmel_pwm->chip); |
| } |
| |
| static struct platform_driver atmel_pwm_driver = { |
| .driver = { |
| .name = "atmel-pwm", |
| .of_match_table = of_match_ptr(atmel_pwm_dt_ids), |
| }, |
| .id_table = atmel_pwm_devtypes, |
| .probe = atmel_pwm_probe, |
| .remove = atmel_pwm_remove, |
| }; |
| module_platform_driver(atmel_pwm_driver); |
| |
| MODULE_ALIAS("platform:atmel-pwm"); |
| MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); |
| MODULE_DESCRIPTION("Atmel PWM driver"); |
| MODULE_LICENSE("GPL v2"); |