| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Support for Faraday Technology FTPC100 PCI Controller |
| * |
| * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> |
| * |
| * Based on the out-of-tree OpenWRT patch for Cortina Gemini: |
| * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com> |
| * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> |
| * Based on SL2312 PCI controller code |
| * Storlink (C) 2003 |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_pci.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/irqdomain.h> |
| #include <linux/irqchip/chained_irq.h> |
| #include <linux/bitops.h> |
| #include <linux/irq.h> |
| #include <linux/clk.h> |
| |
| /* |
| * Special configuration registers directly in the first few words |
| * in I/O space. |
| */ |
| #define PCI_IOSIZE 0x00 |
| #define PCI_PROT 0x04 /* AHB protection */ |
| #define PCI_CTRL 0x08 /* PCI control signal */ |
| #define PCI_SOFTRST 0x10 /* Soft reset counter and response error enable */ |
| #define PCI_CONFIG 0x28 /* PCI configuration command register */ |
| #define PCI_DATA 0x2C |
| |
| #define FARADAY_PCI_STATUS_CMD 0x04 /* Status and command */ |
| #define FARADAY_PCI_PMC 0x40 /* Power management control */ |
| #define FARADAY_PCI_PMCSR 0x44 /* Power management status */ |
| #define FARADAY_PCI_CTRL1 0x48 /* Control register 1 */ |
| #define FARADAY_PCI_CTRL2 0x4C /* Control register 2 */ |
| #define FARADAY_PCI_MEM1_BASE_SIZE 0x50 /* Memory base and size #1 */ |
| #define FARADAY_PCI_MEM2_BASE_SIZE 0x54 /* Memory base and size #2 */ |
| #define FARADAY_PCI_MEM3_BASE_SIZE 0x58 /* Memory base and size #3 */ |
| |
| #define PCI_STATUS_66MHZ_CAPABLE BIT(21) |
| |
| /* Bits 31..28 gives INTD..INTA status */ |
| #define PCI_CTRL2_INTSTS_SHIFT 28 |
| #define PCI_CTRL2_INTMASK_CMDERR BIT(27) |
| #define PCI_CTRL2_INTMASK_PARERR BIT(26) |
| /* Bits 25..22 masks INTD..INTA */ |
| #define PCI_CTRL2_INTMASK_SHIFT 22 |
| #define PCI_CTRL2_INTMASK_MABRT_RX BIT(21) |
| #define PCI_CTRL2_INTMASK_TABRT_RX BIT(20) |
| #define PCI_CTRL2_INTMASK_TABRT_TX BIT(19) |
| #define PCI_CTRL2_INTMASK_RETRY4 BIT(18) |
| #define PCI_CTRL2_INTMASK_SERR_RX BIT(17) |
| #define PCI_CTRL2_INTMASK_PERR_RX BIT(16) |
| /* Bit 15 reserved */ |
| #define PCI_CTRL2_MSTPRI_REQ6 BIT(14) |
| #define PCI_CTRL2_MSTPRI_REQ5 BIT(13) |
| #define PCI_CTRL2_MSTPRI_REQ4 BIT(12) |
| #define PCI_CTRL2_MSTPRI_REQ3 BIT(11) |
| #define PCI_CTRL2_MSTPRI_REQ2 BIT(10) |
| #define PCI_CTRL2_MSTPRI_REQ1 BIT(9) |
| #define PCI_CTRL2_MSTPRI_REQ0 BIT(8) |
| /* Bits 7..4 reserved */ |
| /* Bits 3..0 TRDYW */ |
| |
| /* |
| * Memory configs: |
| * Bit 31..20 defines the PCI side memory base |
| * Bit 19..16 (4 bits) defines the size per below |
| */ |
| #define FARADAY_PCI_MEMBASE_MASK 0xfff00000 |
| #define FARADAY_PCI_MEMSIZE_1MB 0x0 |
| #define FARADAY_PCI_MEMSIZE_2MB 0x1 |
| #define FARADAY_PCI_MEMSIZE_4MB 0x2 |
| #define FARADAY_PCI_MEMSIZE_8MB 0x3 |
| #define FARADAY_PCI_MEMSIZE_16MB 0x4 |
| #define FARADAY_PCI_MEMSIZE_32MB 0x5 |
| #define FARADAY_PCI_MEMSIZE_64MB 0x6 |
| #define FARADAY_PCI_MEMSIZE_128MB 0x7 |
| #define FARADAY_PCI_MEMSIZE_256MB 0x8 |
| #define FARADAY_PCI_MEMSIZE_512MB 0x9 |
| #define FARADAY_PCI_MEMSIZE_1GB 0xa |
| #define FARADAY_PCI_MEMSIZE_2GB 0xb |
| #define FARADAY_PCI_MEMSIZE_SHIFT 16 |
| |
| /* |
| * The DMA base is set to 0x0 for all memory segments, it reflects the |
| * fact that the memory of the host system starts at 0x0. |
| */ |
| #define FARADAY_PCI_DMA_MEM1_BASE 0x00000000 |
| #define FARADAY_PCI_DMA_MEM2_BASE 0x00000000 |
| #define FARADAY_PCI_DMA_MEM3_BASE 0x00000000 |
| |
| /* Defines for PCI configuration command register */ |
| #define PCI_CONF_ENABLE BIT(31) |
| #define PCI_CONF_WHERE(r) ((r) & 0xFC) |
| #define PCI_CONF_BUS(b) (((b) & 0xFF) << 16) |
| #define PCI_CONF_DEVICE(d) (((d) & 0x1F) << 11) |
| #define PCI_CONF_FUNCTION(f) (((f) & 0x07) << 8) |
| |
| /** |
| * struct faraday_pci_variant - encodes IP block differences |
| * @cascaded_irq: this host has cascaded IRQs from an interrupt controller |
| * embedded in the host bridge. |
| */ |
| struct faraday_pci_variant { |
| bool cascaded_irq; |
| }; |
| |
| struct faraday_pci { |
| struct device *dev; |
| void __iomem *base; |
| struct irq_domain *irqdomain; |
| struct pci_bus *bus; |
| struct clk *bus_clk; |
| }; |
| |
| static int faraday_res_to_memcfg(resource_size_t mem_base, |
| resource_size_t mem_size, u32 *val) |
| { |
| u32 outval; |
| |
| switch (mem_size) { |
| case SZ_1M: |
| outval = FARADAY_PCI_MEMSIZE_1MB; |
| break; |
| case SZ_2M: |
| outval = FARADAY_PCI_MEMSIZE_2MB; |
| break; |
| case SZ_4M: |
| outval = FARADAY_PCI_MEMSIZE_4MB; |
| break; |
| case SZ_8M: |
| outval = FARADAY_PCI_MEMSIZE_8MB; |
| break; |
| case SZ_16M: |
| outval = FARADAY_PCI_MEMSIZE_16MB; |
| break; |
| case SZ_32M: |
| outval = FARADAY_PCI_MEMSIZE_32MB; |
| break; |
| case SZ_64M: |
| outval = FARADAY_PCI_MEMSIZE_64MB; |
| break; |
| case SZ_128M: |
| outval = FARADAY_PCI_MEMSIZE_128MB; |
| break; |
| case SZ_256M: |
| outval = FARADAY_PCI_MEMSIZE_256MB; |
| break; |
| case SZ_512M: |
| outval = FARADAY_PCI_MEMSIZE_512MB; |
| break; |
| case SZ_1G: |
| outval = FARADAY_PCI_MEMSIZE_1GB; |
| break; |
| case SZ_2G: |
| outval = FARADAY_PCI_MEMSIZE_2GB; |
| break; |
| default: |
| return -EINVAL; |
| } |
| outval <<= FARADAY_PCI_MEMSIZE_SHIFT; |
| |
| /* This is probably not good */ |
| if (mem_base & ~(FARADAY_PCI_MEMBASE_MASK)) |
| pr_warn("truncated PCI memory base\n"); |
| /* Translate to bridge side address space */ |
| outval |= (mem_base & FARADAY_PCI_MEMBASE_MASK); |
| pr_debug("Translated pci base @%pap, size %pap to config %08x\n", |
| &mem_base, &mem_size, outval); |
| |
| *val = outval; |
| return 0; |
| } |
| |
| static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number, |
| unsigned int fn, int config, int size, |
| u32 *value) |
| { |
| writel(PCI_CONF_BUS(bus_number) | |
| PCI_CONF_DEVICE(PCI_SLOT(fn)) | |
| PCI_CONF_FUNCTION(PCI_FUNC(fn)) | |
| PCI_CONF_WHERE(config) | |
| PCI_CONF_ENABLE, |
| p->base + PCI_CONFIG); |
| |
| *value = readl(p->base + PCI_DATA); |
| |
| if (size == 1) |
| *value = (*value >> (8 * (config & 3))) & 0xFF; |
| else if (size == 2) |
| *value = (*value >> (8 * (config & 3))) & 0xFFFF; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn, |
| int config, int size, u32 *value) |
| { |
| struct faraday_pci *p = bus->sysdata; |
| |
| dev_dbg(&bus->dev, |
| "[read] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n", |
| PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value); |
| |
| return faraday_raw_pci_read_config(p, bus->number, fn, config, size, value); |
| } |
| |
| static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number, |
| unsigned int fn, int config, int size, |
| u32 value) |
| { |
| int ret = PCIBIOS_SUCCESSFUL; |
| |
| writel(PCI_CONF_BUS(bus_number) | |
| PCI_CONF_DEVICE(PCI_SLOT(fn)) | |
| PCI_CONF_FUNCTION(PCI_FUNC(fn)) | |
| PCI_CONF_WHERE(config) | |
| PCI_CONF_ENABLE, |
| p->base + PCI_CONFIG); |
| |
| switch (size) { |
| case 4: |
| writel(value, p->base + PCI_DATA); |
| break; |
| case 2: |
| writew(value, p->base + PCI_DATA + (config & 3)); |
| break; |
| case 1: |
| writeb(value, p->base + PCI_DATA + (config & 3)); |
| break; |
| default: |
| ret = PCIBIOS_BAD_REGISTER_NUMBER; |
| } |
| |
| return ret; |
| } |
| |
| static int faraday_pci_write_config(struct pci_bus *bus, unsigned int fn, |
| int config, int size, u32 value) |
| { |
| struct faraday_pci *p = bus->sysdata; |
| |
| dev_dbg(&bus->dev, |
| "[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n", |
| PCI_SLOT(fn), PCI_FUNC(fn), config, size, value); |
| |
| return faraday_raw_pci_write_config(p, bus->number, fn, config, size, |
| value); |
| } |
| |
| static struct pci_ops faraday_pci_ops = { |
| .read = faraday_pci_read_config, |
| .write = faraday_pci_write_config, |
| }; |
| |
| static void faraday_pci_ack_irq(struct irq_data *d) |
| { |
| struct faraday_pci *p = irq_data_get_irq_chip_data(d); |
| unsigned int reg; |
| |
| faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, ®); |
| reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT); |
| reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT); |
| faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg); |
| } |
| |
| static void faraday_pci_mask_irq(struct irq_data *d) |
| { |
| struct faraday_pci *p = irq_data_get_irq_chip_data(d); |
| unsigned int reg; |
| |
| faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, ®); |
| reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT) |
| | BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT)); |
| faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg); |
| } |
| |
| static void faraday_pci_unmask_irq(struct irq_data *d) |
| { |
| struct faraday_pci *p = irq_data_get_irq_chip_data(d); |
| unsigned int reg; |
| |
| faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, ®); |
| reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT); |
| reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT); |
| faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg); |
| } |
| |
| static void faraday_pci_irq_handler(struct irq_desc *desc) |
| { |
| struct faraday_pci *p = irq_desc_get_handler_data(desc); |
| struct irq_chip *irqchip = irq_desc_get_chip(desc); |
| unsigned int irq_stat, reg, i; |
| |
| faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, ®); |
| irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT; |
| |
| chained_irq_enter(irqchip, desc); |
| |
| for (i = 0; i < 4; i++) { |
| if ((irq_stat & BIT(i)) == 0) |
| continue; |
| generic_handle_irq(irq_find_mapping(p->irqdomain, i)); |
| } |
| |
| chained_irq_exit(irqchip, desc); |
| } |
| |
| static struct irq_chip faraday_pci_irq_chip = { |
| .name = "PCI", |
| .irq_ack = faraday_pci_ack_irq, |
| .irq_mask = faraday_pci_mask_irq, |
| .irq_unmask = faraday_pci_unmask_irq, |
| }; |
| |
| static int faraday_pci_irq_map(struct irq_domain *domain, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| irq_set_chip_and_handler(irq, &faraday_pci_irq_chip, handle_level_irq); |
| irq_set_chip_data(irq, domain->host_data); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops faraday_pci_irqdomain_ops = { |
| .map = faraday_pci_irq_map, |
| }; |
| |
| static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p) |
| { |
| struct device_node *intc = of_get_next_child(p->dev->of_node, NULL); |
| int irq; |
| int i; |
| |
| if (!intc) { |
| dev_err(p->dev, "missing child interrupt-controller node\n"); |
| return -EINVAL; |
| } |
| |
| /* All PCI IRQs cascade off this one */ |
| irq = of_irq_get(intc, 0); |
| if (irq <= 0) { |
| dev_err(p->dev, "failed to get parent IRQ\n"); |
| of_node_put(intc); |
| return irq ?: -EINVAL; |
| } |
| |
| p->irqdomain = irq_domain_add_linear(intc, PCI_NUM_INTX, |
| &faraday_pci_irqdomain_ops, p); |
| of_node_put(intc); |
| if (!p->irqdomain) { |
| dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n"); |
| return -EINVAL; |
| } |
| |
| irq_set_chained_handler_and_data(irq, faraday_pci_irq_handler, p); |
| |
| for (i = 0; i < 4; i++) |
| irq_create_mapping(p->irqdomain, i); |
| |
| return 0; |
| } |
| |
| static int pci_dma_range_parser_init(struct of_pci_range_parser *parser, |
| struct device_node *node) |
| { |
| const int na = 3, ns = 2; |
| int rlen; |
| |
| parser->node = node; |
| parser->pna = of_n_addr_cells(node); |
| parser->np = parser->pna + na + ns; |
| |
| parser->range = of_get_property(node, "dma-ranges", &rlen); |
| if (!parser->range) |
| return -ENOENT; |
| parser->end = parser->range + rlen / sizeof(__be32); |
| |
| return 0; |
| } |
| |
| static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p, |
| struct device_node *np) |
| { |
| struct of_pci_range range; |
| struct of_pci_range_parser parser; |
| struct device *dev = p->dev; |
| u32 confreg[3] = { |
| FARADAY_PCI_MEM1_BASE_SIZE, |
| FARADAY_PCI_MEM2_BASE_SIZE, |
| FARADAY_PCI_MEM3_BASE_SIZE, |
| }; |
| int i = 0; |
| u32 val; |
| |
| if (pci_dma_range_parser_init(&parser, np)) { |
| dev_err(dev, "missing dma-ranges property\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Get the dma-ranges from the device tree |
| */ |
| for_each_of_pci_range(&parser, &range) { |
| u64 end = range.pci_addr + range.size - 1; |
| int ret; |
| |
| ret = faraday_res_to_memcfg(range.pci_addr, range.size, &val); |
| if (ret) { |
| dev_err(dev, |
| "DMA range %d: illegal MEM resource size\n", i); |
| return -EINVAL; |
| } |
| |
| dev_info(dev, "DMA MEM%d BASE: 0x%016llx -> 0x%016llx config %08x\n", |
| i + 1, range.pci_addr, end, val); |
| if (i <= 2) { |
| faraday_raw_pci_write_config(p, 0, 0, confreg[i], |
| 4, val); |
| } else { |
| dev_err(dev, "ignore extraneous dma-range %d\n", i); |
| break; |
| } |
| |
| i++; |
| } |
| |
| return 0; |
| } |
| |
| static int faraday_pci_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct faraday_pci_variant *variant = |
| of_device_get_match_data(dev); |
| struct resource *regs; |
| resource_size_t io_base; |
| struct resource_entry *win; |
| struct faraday_pci *p; |
| struct resource *mem; |
| struct resource *io; |
| struct pci_host_bridge *host; |
| struct clk *clk; |
| unsigned char max_bus_speed = PCI_SPEED_33MHz; |
| unsigned char cur_bus_speed = PCI_SPEED_33MHz; |
| int ret; |
| u32 val; |
| LIST_HEAD(res); |
| |
| host = devm_pci_alloc_host_bridge(dev, sizeof(*p)); |
| if (!host) |
| return -ENOMEM; |
| |
| host->dev.parent = dev; |
| host->ops = &faraday_pci_ops; |
| host->busnr = 0; |
| host->msi = NULL; |
| host->map_irq = of_irq_parse_and_map_pci; |
| host->swizzle_irq = pci_common_swizzle; |
| p = pci_host_bridge_priv(host); |
| host->sysdata = p; |
| p->dev = dev; |
| |
| /* Retrieve and enable optional clocks */ |
| clk = devm_clk_get(dev, "PCLK"); |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| ret = clk_prepare_enable(clk); |
| if (ret) { |
| dev_err(dev, "could not prepare PCLK\n"); |
| return ret; |
| } |
| p->bus_clk = devm_clk_get(dev, "PCICLK"); |
| if (IS_ERR(p->bus_clk)) |
| return PTR_ERR(clk); |
| ret = clk_prepare_enable(p->bus_clk); |
| if (ret) { |
| dev_err(dev, "could not prepare PCICLK\n"); |
| return ret; |
| } |
| |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| p->base = devm_ioremap_resource(dev, regs); |
| if (IS_ERR(p->base)) |
| return PTR_ERR(p->base); |
| |
| ret = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff, |
| &res, &io_base); |
| if (ret) |
| return ret; |
| |
| ret = devm_request_pci_bus_resources(dev, &res); |
| if (ret) |
| return ret; |
| |
| /* Get the I/O and memory ranges from DT */ |
| resource_list_for_each_entry(win, &res) { |
| switch (resource_type(win->res)) { |
| case IORESOURCE_IO: |
| io = win->res; |
| io->name = "Gemini PCI I/O"; |
| if (!faraday_res_to_memcfg(io->start - win->offset, |
| resource_size(io), &val)) { |
| /* setup I/O space size */ |
| writel(val, p->base + PCI_IOSIZE); |
| } else { |
| dev_err(dev, "illegal IO mem size\n"); |
| return -EINVAL; |
| } |
| ret = pci_remap_iospace(io, io_base); |
| if (ret) { |
| dev_warn(dev, "error %d: failed to map resource %pR\n", |
| ret, io); |
| continue; |
| } |
| break; |
| case IORESOURCE_MEM: |
| mem = win->res; |
| mem->name = "Gemini PCI MEM"; |
| break; |
| case IORESOURCE_BUS: |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* Setup hostbridge */ |
| val = readl(p->base + PCI_CTRL); |
| val |= PCI_COMMAND_IO; |
| val |= PCI_COMMAND_MEMORY; |
| val |= PCI_COMMAND_MASTER; |
| writel(val, p->base + PCI_CTRL); |
| /* Mask and clear all interrupts */ |
| faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000); |
| if (variant->cascaded_irq) { |
| ret = faraday_pci_setup_cascaded_irq(p); |
| if (ret) { |
| dev_err(dev, "failed to setup cascaded IRQ\n"); |
| return ret; |
| } |
| } |
| |
| /* Check bus clock if we can gear up to 66 MHz */ |
| if (!IS_ERR(p->bus_clk)) { |
| unsigned long rate; |
| u32 val; |
| |
| faraday_raw_pci_read_config(p, 0, 0, |
| FARADAY_PCI_STATUS_CMD, 4, &val); |
| rate = clk_get_rate(p->bus_clk); |
| |
| if ((rate == 33000000) && (val & PCI_STATUS_66MHZ_CAPABLE)) { |
| dev_info(dev, "33MHz bus is 66MHz capable\n"); |
| max_bus_speed = PCI_SPEED_66MHz; |
| ret = clk_set_rate(p->bus_clk, 66000000); |
| if (ret) |
| dev_err(dev, "failed to set bus clock\n"); |
| } else { |
| dev_info(dev, "33MHz only bus\n"); |
| max_bus_speed = PCI_SPEED_33MHz; |
| } |
| |
| /* Bumping the clock may fail so read back the rate */ |
| rate = clk_get_rate(p->bus_clk); |
| if (rate == 33000000) |
| cur_bus_speed = PCI_SPEED_33MHz; |
| if (rate == 66000000) |
| cur_bus_speed = PCI_SPEED_66MHz; |
| } |
| |
| ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node); |
| if (ret) |
| return ret; |
| |
| list_splice_init(&res, &host->windows); |
| ret = pci_scan_root_bus_bridge(host); |
| if (ret) { |
| dev_err(dev, "failed to scan host: %d\n", ret); |
| return ret; |
| } |
| p->bus = host->bus; |
| p->bus->max_bus_speed = max_bus_speed; |
| p->bus->cur_bus_speed = cur_bus_speed; |
| |
| pci_bus_assign_resources(p->bus); |
| pci_bus_add_devices(p->bus); |
| pci_free_resource_list(&res); |
| |
| return 0; |
| } |
| |
| /* |
| * We encode bridge variants here, we have at least two so it doesn't |
| * hurt to have infrastructure to encompass future variants as well. |
| */ |
| const struct faraday_pci_variant faraday_regular = { |
| .cascaded_irq = true, |
| }; |
| |
| const struct faraday_pci_variant faraday_dual = { |
| .cascaded_irq = false, |
| }; |
| |
| static const struct of_device_id faraday_pci_of_match[] = { |
| { |
| .compatible = "faraday,ftpci100", |
| .data = &faraday_regular, |
| }, |
| { |
| .compatible = "faraday,ftpci100-dual", |
| .data = &faraday_dual, |
| }, |
| {}, |
| }; |
| |
| static struct platform_driver faraday_pci_driver = { |
| .driver = { |
| .name = "ftpci100", |
| .of_match_table = of_match_ptr(faraday_pci_of_match), |
| .suppress_bind_attrs = true, |
| }, |
| .probe = faraday_pci_probe, |
| }; |
| builtin_platform_driver(faraday_pci_driver); |