| #include <linux/export.h> |
| #include <linux/kref.h> |
| #include <linux/list.h> |
| #include <linux/mutex.h> |
| #include <linux/phylink.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/slab.h> |
| |
| #include "sfp.h" |
| |
| struct sfp_bus { |
| struct kref kref; |
| struct list_head node; |
| struct device_node *device_node; |
| |
| const struct sfp_socket_ops *socket_ops; |
| struct device *sfp_dev; |
| struct sfp *sfp; |
| |
| const struct sfp_upstream_ops *upstream_ops; |
| void *upstream; |
| struct net_device *netdev; |
| struct phy_device *phydev; |
| |
| bool registered; |
| bool started; |
| }; |
| |
| |
| int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id, |
| unsigned long *support) |
| { |
| int port; |
| |
| /* port is the physical connector, set this from the connector field. */ |
| switch (id->base.connector) { |
| case SFP_CONNECTOR_SC: |
| case SFP_CONNECTOR_FIBERJACK: |
| case SFP_CONNECTOR_LC: |
| case SFP_CONNECTOR_MT_RJ: |
| case SFP_CONNECTOR_MU: |
| case SFP_CONNECTOR_OPTICAL_PIGTAIL: |
| if (support) |
| phylink_set(support, FIBRE); |
| port = PORT_FIBRE; |
| break; |
| |
| case SFP_CONNECTOR_RJ45: |
| if (support) |
| phylink_set(support, TP); |
| port = PORT_TP; |
| break; |
| |
| case SFP_CONNECTOR_UNSPEC: |
| if (id->base.e1000_base_t) { |
| if (support) |
| phylink_set(support, TP); |
| port = PORT_TP; |
| break; |
| } |
| /* fallthrough */ |
| case SFP_CONNECTOR_SG: /* guess */ |
| case SFP_CONNECTOR_MPO_1X12: |
| case SFP_CONNECTOR_MPO_2X16: |
| case SFP_CONNECTOR_HSSDC_II: |
| case SFP_CONNECTOR_COPPER_PIGTAIL: |
| case SFP_CONNECTOR_NOSEPARATE: |
| case SFP_CONNECTOR_MXC_2X16: |
| port = PORT_OTHER; |
| break; |
| default: |
| dev_warn(bus->sfp_dev, "SFP: unknown connector id 0x%02x\n", |
| id->base.connector); |
| port = PORT_OTHER; |
| break; |
| } |
| |
| return port; |
| } |
| EXPORT_SYMBOL_GPL(sfp_parse_port); |
| |
| phy_interface_t sfp_parse_interface(struct sfp_bus *bus, |
| const struct sfp_eeprom_id *id) |
| { |
| phy_interface_t iface; |
| |
| /* Setting the serdes link mode is guesswork: there's no field in |
| * the EEPROM which indicates what mode should be used. |
| * |
| * If the module wants 64b66b, then it must be >= 10G. |
| * |
| * If it's a gigabit-only fiber module, it probably does not have |
| * a PHY, so switch to 802.3z negotiation mode. Otherwise, switch |
| * to SGMII mode (which is required to support non-gigabit speeds). |
| */ |
| switch (id->base.encoding) { |
| case SFP_ENCODING_8472_64B66B: |
| iface = PHY_INTERFACE_MODE_10GKR; |
| break; |
| |
| case SFP_ENCODING_8B10B: |
| if (!id->base.e1000_base_t && |
| !id->base.e100_base_lx && |
| !id->base.e100_base_fx) |
| iface = PHY_INTERFACE_MODE_1000BASEX; |
| else |
| iface = PHY_INTERFACE_MODE_SGMII; |
| break; |
| |
| default: |
| iface = PHY_INTERFACE_MODE_NA; |
| dev_err(bus->sfp_dev, |
| "SFP module encoding does not support 8b10b nor 64b66b\n"); |
| break; |
| } |
| |
| return iface; |
| } |
| EXPORT_SYMBOL_GPL(sfp_parse_interface); |
| |
| void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, |
| unsigned long *support) |
| { |
| phylink_set(support, Autoneg); |
| phylink_set(support, Pause); |
| phylink_set(support, Asym_Pause); |
| |
| /* Set ethtool support from the compliance fields. */ |
| if (id->base.e10g_base_sr) |
| phylink_set(support, 10000baseSR_Full); |
| if (id->base.e10g_base_lr) |
| phylink_set(support, 10000baseLR_Full); |
| if (id->base.e10g_base_lrm) |
| phylink_set(support, 10000baseLRM_Full); |
| if (id->base.e10g_base_er) |
| phylink_set(support, 10000baseER_Full); |
| if (id->base.e1000_base_sx || |
| id->base.e1000_base_lx || |
| id->base.e1000_base_cx) |
| phylink_set(support, 1000baseX_Full); |
| if (id->base.e1000_base_t) { |
| phylink_set(support, 1000baseT_Half); |
| phylink_set(support, 1000baseT_Full); |
| } |
| |
| switch (id->base.extended_cc) { |
| case 0x00: /* Unspecified */ |
| break; |
| case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */ |
| phylink_set(support, 100000baseSR4_Full); |
| phylink_set(support, 25000baseSR_Full); |
| break; |
| case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */ |
| case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */ |
| phylink_set(support, 100000baseLR4_ER4_Full); |
| break; |
| case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */ |
| case 0x0c: /* 25Gbase-CR CA-S */ |
| case 0x0d: /* 25Gbase-CR CA-N */ |
| phylink_set(support, 100000baseCR4_Full); |
| phylink_set(support, 25000baseCR_Full); |
| break; |
| default: |
| dev_warn(bus->sfp_dev, |
| "Unknown/unsupported extended compliance code: 0x%02x\n", |
| id->base.extended_cc); |
| break; |
| } |
| |
| /* For fibre channel SFP, derive possible BaseX modes */ |
| if (id->base.fc_speed_100 || |
| id->base.fc_speed_200 || |
| id->base.fc_speed_400) { |
| if (id->base.br_nominal >= 31) |
| phylink_set(support, 2500baseX_Full); |
| if (id->base.br_nominal >= 12) |
| phylink_set(support, 1000baseX_Full); |
| } |
| |
| switch (id->base.connector) { |
| case SFP_CONNECTOR_SC: |
| case SFP_CONNECTOR_FIBERJACK: |
| case SFP_CONNECTOR_LC: |
| case SFP_CONNECTOR_MT_RJ: |
| case SFP_CONNECTOR_MU: |
| case SFP_CONNECTOR_OPTICAL_PIGTAIL: |
| break; |
| |
| case SFP_CONNECTOR_UNSPEC: |
| if (id->base.e1000_base_t) |
| break; |
| |
| case SFP_CONNECTOR_SG: /* guess */ |
| case SFP_CONNECTOR_MPO_1X12: |
| case SFP_CONNECTOR_MPO_2X16: |
| case SFP_CONNECTOR_HSSDC_II: |
| case SFP_CONNECTOR_COPPER_PIGTAIL: |
| case SFP_CONNECTOR_NOSEPARATE: |
| case SFP_CONNECTOR_MXC_2X16: |
| default: |
| /* a guess at the supported link modes */ |
| dev_warn(bus->sfp_dev, |
| "Guessing link modes, please report...\n"); |
| phylink_set(support, 1000baseT_Half); |
| phylink_set(support, 1000baseT_Full); |
| break; |
| } |
| } |
| EXPORT_SYMBOL_GPL(sfp_parse_support); |
| |
| |
| static LIST_HEAD(sfp_buses); |
| static DEFINE_MUTEX(sfp_mutex); |
| |
| static const struct sfp_upstream_ops *sfp_get_upstream_ops(struct sfp_bus *bus) |
| { |
| return bus->registered ? bus->upstream_ops : NULL; |
| } |
| |
| static struct sfp_bus *sfp_bus_get(struct device_node *np) |
| { |
| struct sfp_bus *sfp, *new, *found = NULL; |
| |
| new = kzalloc(sizeof(*new), GFP_KERNEL); |
| |
| mutex_lock(&sfp_mutex); |
| |
| list_for_each_entry(sfp, &sfp_buses, node) { |
| if (sfp->device_node == np) { |
| kref_get(&sfp->kref); |
| found = sfp; |
| break; |
| } |
| } |
| |
| if (!found && new) { |
| kref_init(&new->kref); |
| new->device_node = np; |
| list_add(&new->node, &sfp_buses); |
| found = new; |
| new = NULL; |
| } |
| |
| mutex_unlock(&sfp_mutex); |
| |
| kfree(new); |
| |
| return found; |
| } |
| |
| static void sfp_bus_release(struct kref *kref) __releases(sfp_mutex) |
| { |
| struct sfp_bus *bus = container_of(kref, struct sfp_bus, kref); |
| |
| list_del(&bus->node); |
| mutex_unlock(&sfp_mutex); |
| kfree(bus); |
| } |
| |
| static void sfp_bus_put(struct sfp_bus *bus) |
| { |
| kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex); |
| } |
| |
| static int sfp_register_bus(struct sfp_bus *bus) |
| { |
| const struct sfp_upstream_ops *ops = bus->upstream_ops; |
| int ret; |
| |
| if (ops) { |
| if (ops->link_down) |
| ops->link_down(bus->upstream); |
| if (ops->connect_phy && bus->phydev) { |
| ret = ops->connect_phy(bus->upstream, bus->phydev); |
| if (ret) |
| return ret; |
| } |
| } |
| bus->socket_ops->attach(bus->sfp); |
| if (bus->started) |
| bus->socket_ops->start(bus->sfp); |
| bus->registered = true; |
| return 0; |
| } |
| |
| static void sfp_unregister_bus(struct sfp_bus *bus) |
| { |
| const struct sfp_upstream_ops *ops = bus->upstream_ops; |
| |
| if (bus->registered) { |
| if (bus->started) |
| bus->socket_ops->stop(bus->sfp); |
| bus->socket_ops->detach(bus->sfp); |
| if (bus->phydev && ops && ops->disconnect_phy) |
| ops->disconnect_phy(bus->upstream); |
| } |
| bus->registered = false; |
| } |
| |
| |
| int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo) |
| { |
| if (!bus->registered) |
| return -ENOIOCTLCMD; |
| return bus->socket_ops->module_info(bus->sfp, modinfo); |
| } |
| EXPORT_SYMBOL_GPL(sfp_get_module_info); |
| |
| int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee, |
| u8 *data) |
| { |
| if (!bus->registered) |
| return -ENOIOCTLCMD; |
| return bus->socket_ops->module_eeprom(bus->sfp, ee, data); |
| } |
| EXPORT_SYMBOL_GPL(sfp_get_module_eeprom); |
| |
| void sfp_upstream_start(struct sfp_bus *bus) |
| { |
| if (bus->registered) |
| bus->socket_ops->start(bus->sfp); |
| bus->started = true; |
| } |
| EXPORT_SYMBOL_GPL(sfp_upstream_start); |
| |
| void sfp_upstream_stop(struct sfp_bus *bus) |
| { |
| if (bus->registered) |
| bus->socket_ops->stop(bus->sfp); |
| bus->started = false; |
| } |
| EXPORT_SYMBOL_GPL(sfp_upstream_stop); |
| |
| struct sfp_bus *sfp_register_upstream(struct device_node *np, |
| struct net_device *ndev, void *upstream, |
| const struct sfp_upstream_ops *ops) |
| { |
| struct sfp_bus *bus = sfp_bus_get(np); |
| int ret = 0; |
| |
| if (bus) { |
| rtnl_lock(); |
| bus->upstream_ops = ops; |
| bus->upstream = upstream; |
| bus->netdev = ndev; |
| |
| if (bus->sfp) |
| ret = sfp_register_bus(bus); |
| rtnl_unlock(); |
| } |
| |
| if (ret) { |
| sfp_bus_put(bus); |
| bus = NULL; |
| } |
| |
| return bus; |
| } |
| EXPORT_SYMBOL_GPL(sfp_register_upstream); |
| |
| void sfp_unregister_upstream(struct sfp_bus *bus) |
| { |
| rtnl_lock(); |
| if (bus->sfp) |
| sfp_unregister_bus(bus); |
| bus->upstream = NULL; |
| bus->netdev = NULL; |
| rtnl_unlock(); |
| |
| sfp_bus_put(bus); |
| } |
| EXPORT_SYMBOL_GPL(sfp_unregister_upstream); |
| |
| |
| /* Socket driver entry points */ |
| int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev) |
| { |
| const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); |
| int ret = 0; |
| |
| if (ops && ops->connect_phy) |
| ret = ops->connect_phy(bus->upstream, phydev); |
| |
| if (ret == 0) |
| bus->phydev = phydev; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(sfp_add_phy); |
| |
| void sfp_remove_phy(struct sfp_bus *bus) |
| { |
| const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); |
| |
| if (ops && ops->disconnect_phy) |
| ops->disconnect_phy(bus->upstream); |
| bus->phydev = NULL; |
| } |
| EXPORT_SYMBOL_GPL(sfp_remove_phy); |
| |
| |
| void sfp_link_up(struct sfp_bus *bus) |
| { |
| const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); |
| |
| if (ops && ops->link_up) |
| ops->link_up(bus->upstream); |
| } |
| EXPORT_SYMBOL_GPL(sfp_link_up); |
| |
| void sfp_link_down(struct sfp_bus *bus) |
| { |
| const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); |
| |
| if (ops && ops->link_down) |
| ops->link_down(bus->upstream); |
| } |
| EXPORT_SYMBOL_GPL(sfp_link_down); |
| |
| int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id) |
| { |
| const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); |
| int ret = 0; |
| |
| if (ops && ops->module_insert) |
| ret = ops->module_insert(bus->upstream, id); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(sfp_module_insert); |
| |
| void sfp_module_remove(struct sfp_bus *bus) |
| { |
| const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); |
| |
| if (ops && ops->module_remove) |
| ops->module_remove(bus->upstream); |
| } |
| EXPORT_SYMBOL_GPL(sfp_module_remove); |
| |
| struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp, |
| const struct sfp_socket_ops *ops) |
| { |
| struct sfp_bus *bus = sfp_bus_get(dev->of_node); |
| int ret = 0; |
| |
| if (bus) { |
| rtnl_lock(); |
| bus->sfp_dev = dev; |
| bus->sfp = sfp; |
| bus->socket_ops = ops; |
| |
| if (bus->netdev) |
| ret = sfp_register_bus(bus); |
| rtnl_unlock(); |
| } |
| |
| if (ret) { |
| sfp_bus_put(bus); |
| bus = NULL; |
| } |
| |
| return bus; |
| } |
| EXPORT_SYMBOL_GPL(sfp_register_socket); |
| |
| void sfp_unregister_socket(struct sfp_bus *bus) |
| { |
| rtnl_lock(); |
| if (bus->netdev) |
| sfp_unregister_bus(bus); |
| bus->sfp_dev = NULL; |
| bus->sfp = NULL; |
| bus->socket_ops = NULL; |
| rtnl_unlock(); |
| |
| sfp_bus_put(bus); |
| } |
| EXPORT_SYMBOL_GPL(sfp_unregister_socket); |