| /* |
| * GPIO based MDIO bitbang driver. |
| * Supports OpenFirmware. |
| * |
| * Copyright (c) 2008 CSE Semaphore Belgium. |
| * by Laurent Pinchart <laurentp@cse-semaphore.com> |
| * |
| * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt> |
| * |
| * Based on earlier work by |
| * |
| * Copyright (c) 2003 Intracom S.A. |
| * by Pantelis Antoniou <panto@intracom.gr> |
| * |
| * 2005 (c) MontaVista Software, Inc. |
| * Vitaly Bordug <vbordug@ru.mvista.com> |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/platform_data/mdio-gpio.h> |
| |
| #include <linux/of_gpio.h> |
| #include <linux/of_mdio.h> |
| |
| struct mdio_gpio_info { |
| struct mdiobb_ctrl ctrl; |
| struct gpio_desc *mdc, *mdio, *mdo; |
| }; |
| |
| static void *mdio_gpio_of_get_data(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct mdio_gpio_platform_data *pdata; |
| enum of_gpio_flags flags; |
| int ret; |
| |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return NULL; |
| |
| ret = of_get_gpio_flags(np, 0, &flags); |
| if (ret < 0) |
| return NULL; |
| |
| pdata->mdc = ret; |
| pdata->mdc_active_low = flags & OF_GPIO_ACTIVE_LOW; |
| |
| ret = of_get_gpio_flags(np, 1, &flags); |
| if (ret < 0) |
| return NULL; |
| pdata->mdio = ret; |
| pdata->mdio_active_low = flags & OF_GPIO_ACTIVE_LOW; |
| |
| ret = of_get_gpio_flags(np, 2, &flags); |
| if (ret > 0) { |
| pdata->mdo = ret; |
| pdata->mdo_active_low = flags & OF_GPIO_ACTIVE_LOW; |
| } |
| |
| return pdata; |
| } |
| |
| static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) |
| { |
| struct mdio_gpio_info *bitbang = |
| container_of(ctrl, struct mdio_gpio_info, ctrl); |
| |
| if (bitbang->mdo) { |
| /* Separate output pin. Always set its value to high |
| * when changing direction. If direction is input, |
| * assume the pin serves as pull-up. If direction is |
| * output, the default value is high. |
| */ |
| gpiod_set_value_cansleep(bitbang->mdo, 1); |
| return; |
| } |
| |
| if (dir) |
| gpiod_direction_output(bitbang->mdio, 1); |
| else |
| gpiod_direction_input(bitbang->mdio); |
| } |
| |
| static int mdio_get(struct mdiobb_ctrl *ctrl) |
| { |
| struct mdio_gpio_info *bitbang = |
| container_of(ctrl, struct mdio_gpio_info, ctrl); |
| |
| return gpiod_get_value_cansleep(bitbang->mdio); |
| } |
| |
| static void mdio_set(struct mdiobb_ctrl *ctrl, int what) |
| { |
| struct mdio_gpio_info *bitbang = |
| container_of(ctrl, struct mdio_gpio_info, ctrl); |
| |
| if (bitbang->mdo) |
| gpiod_set_value_cansleep(bitbang->mdo, what); |
| else |
| gpiod_set_value_cansleep(bitbang->mdio, what); |
| } |
| |
| static void mdc_set(struct mdiobb_ctrl *ctrl, int what) |
| { |
| struct mdio_gpio_info *bitbang = |
| container_of(ctrl, struct mdio_gpio_info, ctrl); |
| |
| gpiod_set_value_cansleep(bitbang->mdc, what); |
| } |
| |
| static const struct mdiobb_ops mdio_gpio_ops = { |
| .owner = THIS_MODULE, |
| .set_mdc = mdc_set, |
| .set_mdio_dir = mdio_dir, |
| .set_mdio_data = mdio_set, |
| .get_mdio_data = mdio_get, |
| }; |
| |
| static struct mii_bus *mdio_gpio_bus_init(struct device *dev, |
| struct mdio_gpio_platform_data *pdata, |
| int bus_id) |
| { |
| struct mii_bus *new_bus; |
| struct mdio_gpio_info *bitbang; |
| int i; |
| int mdc, mdio, mdo; |
| unsigned long mdc_flags = GPIOF_OUT_INIT_LOW; |
| unsigned long mdio_flags = GPIOF_DIR_IN; |
| unsigned long mdo_flags = GPIOF_OUT_INIT_HIGH; |
| |
| bitbang = devm_kzalloc(dev, sizeof(*bitbang), GFP_KERNEL); |
| if (!bitbang) |
| goto out; |
| |
| bitbang->ctrl.ops = &mdio_gpio_ops; |
| bitbang->ctrl.reset = pdata->reset; |
| mdc = pdata->mdc; |
| bitbang->mdc = gpio_to_desc(mdc); |
| if (pdata->mdc_active_low) |
| mdc_flags = GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW; |
| mdio = pdata->mdio; |
| bitbang->mdio = gpio_to_desc(mdio); |
| if (pdata->mdio_active_low) |
| mdio_flags |= GPIOF_ACTIVE_LOW; |
| mdo = pdata->mdo; |
| if (mdo) { |
| bitbang->mdo = gpio_to_desc(mdo); |
| if (pdata->mdo_active_low) |
| mdo_flags = GPIOF_OUT_INIT_LOW | GPIOF_ACTIVE_LOW; |
| } |
| |
| new_bus = alloc_mdio_bitbang(&bitbang->ctrl); |
| if (!new_bus) |
| goto out; |
| |
| new_bus->name = "GPIO Bitbanged MDIO", |
| |
| new_bus->phy_mask = pdata->phy_mask; |
| new_bus->phy_ignore_ta_mask = pdata->phy_ignore_ta_mask; |
| memcpy(new_bus->irq, pdata->irqs, sizeof(new_bus->irq)); |
| new_bus->parent = dev; |
| |
| if (new_bus->phy_mask == ~0) |
| goto out_free_bus; |
| |
| for (i = 0; i < PHY_MAX_ADDR; i++) |
| if (!new_bus->irq[i]) |
| new_bus->irq[i] = PHY_POLL; |
| |
| if (bus_id != -1) |
| snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id); |
| else |
| strncpy(new_bus->id, "gpio", MII_BUS_ID_SIZE); |
| |
| if (devm_gpio_request_one(dev, mdc, mdc_flags, "mdc")) |
| goto out_free_bus; |
| |
| if (devm_gpio_request_one(dev, mdio, mdio_flags, "mdio")) |
| goto out_free_bus; |
| |
| if (mdo && devm_gpio_request_one(dev, mdo, mdo_flags, "mdo")) |
| goto out_free_bus; |
| |
| dev_set_drvdata(dev, new_bus); |
| |
| return new_bus; |
| |
| out_free_bus: |
| free_mdio_bitbang(new_bus); |
| out: |
| return NULL; |
| } |
| |
| static void mdio_gpio_bus_deinit(struct device *dev) |
| { |
| struct mii_bus *bus = dev_get_drvdata(dev); |
| |
| free_mdio_bitbang(bus); |
| } |
| |
| static void mdio_gpio_bus_destroy(struct device *dev) |
| { |
| struct mii_bus *bus = dev_get_drvdata(dev); |
| |
| mdiobus_unregister(bus); |
| mdio_gpio_bus_deinit(dev); |
| } |
| |
| static int mdio_gpio_probe(struct platform_device *pdev) |
| { |
| struct mdio_gpio_platform_data *pdata; |
| struct mii_bus *new_bus; |
| int ret, bus_id; |
| |
| if (pdev->dev.of_node) { |
| pdata = mdio_gpio_of_get_data(pdev); |
| bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio"); |
| if (bus_id < 0) { |
| dev_warn(&pdev->dev, "failed to get alias id\n"); |
| bus_id = 0; |
| } |
| } else { |
| pdata = dev_get_platdata(&pdev->dev); |
| bus_id = pdev->id; |
| } |
| |
| if (!pdata) |
| return -ENODEV; |
| |
| new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, bus_id); |
| if (!new_bus) |
| return -ENODEV; |
| |
| if (pdev->dev.of_node) |
| ret = of_mdiobus_register(new_bus, pdev->dev.of_node); |
| else |
| ret = mdiobus_register(new_bus); |
| |
| if (ret) |
| mdio_gpio_bus_deinit(&pdev->dev); |
| |
| return ret; |
| } |
| |
| static int mdio_gpio_remove(struct platform_device *pdev) |
| { |
| mdio_gpio_bus_destroy(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mdio_gpio_of_match[] = { |
| { .compatible = "virtual,mdio-gpio", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, mdio_gpio_of_match); |
| |
| static struct platform_driver mdio_gpio_driver = { |
| .probe = mdio_gpio_probe, |
| .remove = mdio_gpio_remove, |
| .driver = { |
| .name = "mdio-gpio", |
| .of_match_table = mdio_gpio_of_match, |
| }, |
| }; |
| |
| module_platform_driver(mdio_gpio_driver); |
| |
| MODULE_ALIAS("platform:mdio-gpio"); |
| MODULE_AUTHOR("Laurent Pinchart, Paulius Zaleckas"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Generic driver for MDIO bus emulation using GPIO"); |