| /* |
| * Miro PCM20 radio driver for Linux radio support |
| * (c) 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl> |
| * Thanks to Norberto Pellici for the ACI device interface specification |
| * The API part is based on the radiotrack driver by M. Kirkwood |
| * This driver relies on the aci mixer provided by the snd-miro |
| * ALSA driver. |
| * Look there for further info... |
| * |
| * From the original miro RDS sources: |
| * |
| * (c) 2001 Robert Siemer <Robert.Siemer@gmx.de> |
| * |
| * Many thanks to Fred Seidel <seidel@metabox.de>, the |
| * designer of the RDS decoder hardware. With his help |
| * I was able to code this driver. |
| * Thanks also to Norberto Pellicci, Dominic Mounteney |
| * <DMounteney@pinnaclesys.com> and www.teleauskunft.de |
| * for good hints on finding Fred. It was somewhat hard |
| * to locate him here in Germany... [: |
| * |
| * This code has been reintroduced and converted to use |
| * the new V4L2 RDS API by: |
| * |
| * Hans Verkuil <hans.verkuil@cisco.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/videodev2.h> |
| #include <linux/kthread.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-fh.h> |
| #include <media/v4l2-event.h> |
| #include <sound/aci.h> |
| |
| #define RDS_DATASHIFT 2 /* Bit 2 */ |
| #define RDS_DATAMASK (1 << RDS_DATASHIFT) |
| #define RDS_BUSYMASK 0x10 /* Bit 4 */ |
| #define RDS_CLOCKMASK 0x08 /* Bit 3 */ |
| #define RDS_DATA(x) (((x) >> RDS_DATASHIFT) & 1) |
| |
| #define RDS_STATUS 0x01 |
| #define RDS_STATIONNAME 0x02 |
| #define RDS_TEXT 0x03 |
| #define RDS_ALTFREQ 0x04 |
| #define RDS_TIMEDATE 0x05 |
| #define RDS_PI_CODE 0x06 |
| #define RDS_PTYTATP 0x07 |
| #define RDS_RESET 0x08 |
| #define RDS_RXVALUE 0x09 |
| |
| static int radio_nr = -1; |
| module_param(radio_nr, int, 0); |
| MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)"); |
| |
| struct pcm20 { |
| struct v4l2_device v4l2_dev; |
| struct video_device vdev; |
| struct v4l2_ctrl_handler ctrl_handler; |
| struct v4l2_ctrl *rds_pty; |
| struct v4l2_ctrl *rds_ps_name; |
| struct v4l2_ctrl *rds_radio_test; |
| struct v4l2_ctrl *rds_ta; |
| struct v4l2_ctrl *rds_tp; |
| struct v4l2_ctrl *rds_ms; |
| /* thread for periodic RDS status checking */ |
| struct task_struct *kthread; |
| unsigned long freq; |
| u32 audmode; |
| struct snd_miro_aci *aci; |
| struct mutex lock; |
| }; |
| |
| static struct pcm20 pcm20_card = { |
| .freq = 87 * 16000, |
| .audmode = V4L2_TUNER_MODE_STEREO, |
| }; |
| |
| |
| static int rds_waitread(struct snd_miro_aci *aci) |
| { |
| u8 byte; |
| int i = 2000; |
| |
| do { |
| byte = inb(aci->aci_port + ACI_REG_RDS); |
| i--; |
| } while ((byte & RDS_BUSYMASK) && i); |
| |
| /* |
| * It's magic, but without this the data that you read later on |
| * is unreliable and full of bit errors. With this 1 usec delay |
| * everything is fine. |
| */ |
| udelay(1); |
| return i ? byte : -1; |
| } |
| |
| static int rds_rawwrite(struct snd_miro_aci *aci, u8 byte) |
| { |
| if (rds_waitread(aci) >= 0) { |
| outb(byte, aci->aci_port + ACI_REG_RDS); |
| return 0; |
| } |
| return -1; |
| } |
| |
| static int rds_write(struct snd_miro_aci *aci, u8 byte) |
| { |
| u8 sendbuffer[8]; |
| int i; |
| |
| for (i = 7; i >= 0; i--) |
| sendbuffer[7 - i] = (byte & (1 << i)) ? RDS_DATAMASK : 0; |
| sendbuffer[0] |= RDS_CLOCKMASK; |
| |
| for (i = 0; i < 8; i++) |
| rds_rawwrite(aci, sendbuffer[i]); |
| return 0; |
| } |
| |
| static int rds_readcycle_nowait(struct snd_miro_aci *aci) |
| { |
| outb(0, aci->aci_port + ACI_REG_RDS); |
| return rds_waitread(aci); |
| } |
| |
| static int rds_readcycle(struct snd_miro_aci *aci) |
| { |
| if (rds_rawwrite(aci, 0) < 0) |
| return -1; |
| return rds_waitread(aci); |
| } |
| |
| static int rds_ack(struct snd_miro_aci *aci) |
| { |
| int i = rds_readcycle(aci); |
| |
| if (i < 0) |
| return -1; |
| if (i & RDS_DATAMASK) |
| return 0; /* ACK */ |
| return 1; /* NACK */ |
| } |
| |
| static int rds_cmd(struct snd_miro_aci *aci, u8 cmd, u8 databuffer[], u8 datasize) |
| { |
| int i, j; |
| |
| rds_write(aci, cmd); |
| |
| /* RDS_RESET doesn't need further processing */ |
| if (cmd == RDS_RESET) |
| return 0; |
| if (rds_ack(aci)) |
| return -EIO; |
| if (datasize == 0) |
| return 0; |
| |
| /* to be able to use rds_readcycle_nowait() |
| I have to waitread() here */ |
| if (rds_waitread(aci) < 0) |
| return -1; |
| |
| memset(databuffer, 0, datasize); |
| |
| for (i = 0; i < 8 * datasize; i++) { |
| j = rds_readcycle_nowait(aci); |
| if (j < 0) |
| return -EIO; |
| databuffer[i / 8] |= RDS_DATA(j) << (7 - (i % 8)); |
| } |
| return 0; |
| } |
| |
| static int pcm20_setfreq(struct pcm20 *dev, unsigned long freq) |
| { |
| unsigned char freql; |
| unsigned char freqh; |
| struct snd_miro_aci *aci = dev->aci; |
| |
| freq /= 160; |
| if (!(aci->aci_version == 0x07 || aci->aci_version >= 0xb0)) |
| freq /= 10; /* I don't know exactly which version |
| * needs this hack */ |
| freql = freq & 0xff; |
| freqh = freq >> 8; |
| |
| rds_cmd(aci, RDS_RESET, NULL, 0); |
| return snd_aci_cmd(aci, ACI_WRITE_TUNE, freql, freqh); |
| } |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *v) |
| { |
| struct pcm20 *dev = video_drvdata(file); |
| |
| strlcpy(v->driver, "Miro PCM20", sizeof(v->driver)); |
| strlcpy(v->card, "Miro PCM20", sizeof(v->card)); |
| snprintf(v->bus_info, sizeof(v->bus_info), "ISA:%s", dev->v4l2_dev.name); |
| v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE; |
| v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS; |
| return 0; |
| } |
| |
| static bool sanitize(char *p, int size) |
| { |
| int i; |
| bool ret = true; |
| |
| for (i = 0; i < size; i++) { |
| if (p[i] < 32) { |
| p[i] = ' '; |
| ret = false; |
| } |
| } |
| return ret; |
| } |
| |
| static int vidioc_g_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| struct pcm20 *dev = video_drvdata(file); |
| int res; |
| u8 buf; |
| |
| if (v->index) |
| return -EINVAL; |
| strlcpy(v->name, "FM", sizeof(v->name)); |
| v->type = V4L2_TUNER_RADIO; |
| v->rangelow = 87*16000; |
| v->rangehigh = 108*16000; |
| res = snd_aci_cmd(dev->aci, ACI_READ_TUNERSTATION, -1, -1); |
| v->signal = (res & 0x80) ? 0 : 0xffff; |
| /* Note: stereo detection does not work if the audio is muted, |
| it will default to mono in that case. */ |
| res = snd_aci_cmd(dev->aci, ACI_READ_TUNERSTEREO, -1, -1); |
| v->rxsubchans = (res & 0x40) ? V4L2_TUNER_SUB_MONO : |
| V4L2_TUNER_SUB_STEREO; |
| v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | |
| V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_CONTROLS; |
| v->audmode = dev->audmode; |
| res = rds_cmd(dev->aci, RDS_RXVALUE, &buf, 1); |
| if (res >= 0 && buf) |
| v->rxsubchans |= V4L2_TUNER_SUB_RDS; |
| return 0; |
| } |
| |
| static int vidioc_s_tuner(struct file *file, void *priv, |
| const struct v4l2_tuner *v) |
| { |
| struct pcm20 *dev = video_drvdata(file); |
| |
| if (v->index) |
| return -EINVAL; |
| if (v->audmode > V4L2_TUNER_MODE_STEREO) |
| dev->audmode = V4L2_TUNER_MODE_STEREO; |
| else |
| dev->audmode = v->audmode; |
| snd_aci_cmd(dev->aci, ACI_SET_TUNERMONO, |
| dev->audmode == V4L2_TUNER_MODE_MONO, -1); |
| return 0; |
| } |
| |
| static int vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct pcm20 *dev = video_drvdata(file); |
| |
| if (f->tuner != 0) |
| return -EINVAL; |
| |
| f->type = V4L2_TUNER_RADIO; |
| f->frequency = dev->freq; |
| return 0; |
| } |
| |
| |
| static int vidioc_s_frequency(struct file *file, void *priv, |
| const struct v4l2_frequency *f) |
| { |
| struct pcm20 *dev = video_drvdata(file); |
| |
| if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) |
| return -EINVAL; |
| |
| dev->freq = clamp_t(u32, f->frequency, 87 * 16000U, 108 * 16000U); |
| pcm20_setfreq(dev, dev->freq); |
| return 0; |
| } |
| |
| static int pcm20_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct pcm20 *dev = container_of(ctrl->handler, struct pcm20, ctrl_handler); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| snd_aci_cmd(dev->aci, ACI_SET_TUNERMUTE, ctrl->val, -1); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int pcm20_thread(void *data) |
| { |
| struct pcm20 *dev = data; |
| const unsigned no_rds_start_counter = 5; |
| const unsigned sleep_msecs = 2000; |
| unsigned no_rds_counter = no_rds_start_counter; |
| |
| for (;;) { |
| char text_buffer[66]; |
| u8 buf; |
| int res; |
| |
| msleep_interruptible(sleep_msecs); |
| |
| if (kthread_should_stop()) |
| break; |
| |
| res = rds_cmd(dev->aci, RDS_RXVALUE, &buf, 1); |
| if (res) |
| continue; |
| if (buf == 0) { |
| if (no_rds_counter == 0) |
| continue; |
| no_rds_counter--; |
| if (no_rds_counter) |
| continue; |
| |
| /* |
| * No RDS seen for no_rds_start_counter * sleep_msecs |
| * milliseconds, clear all RDS controls to their |
| * default values. |
| */ |
| v4l2_ctrl_s_ctrl_string(dev->rds_ps_name, ""); |
| v4l2_ctrl_s_ctrl(dev->rds_ms, 1); |
| v4l2_ctrl_s_ctrl(dev->rds_ta, 0); |
| v4l2_ctrl_s_ctrl(dev->rds_tp, 0); |
| v4l2_ctrl_s_ctrl(dev->rds_pty, 0); |
| v4l2_ctrl_s_ctrl_string(dev->rds_radio_test, ""); |
| continue; |
| } |
| no_rds_counter = no_rds_start_counter; |
| |
| res = rds_cmd(dev->aci, RDS_STATUS, &buf, 1); |
| if (res) |
| continue; |
| if ((buf >> 3) & 1) { |
| res = rds_cmd(dev->aci, RDS_STATIONNAME, text_buffer, 8); |
| text_buffer[8] = 0; |
| if (!res && sanitize(text_buffer, 8)) |
| v4l2_ctrl_s_ctrl_string(dev->rds_ps_name, text_buffer); |
| } |
| if ((buf >> 6) & 1) { |
| u8 pty; |
| |
| res = rds_cmd(dev->aci, RDS_PTYTATP, &pty, 1); |
| if (!res) { |
| v4l2_ctrl_s_ctrl(dev->rds_ms, !!(pty & 0x01)); |
| v4l2_ctrl_s_ctrl(dev->rds_ta, !!(pty & 0x02)); |
| v4l2_ctrl_s_ctrl(dev->rds_tp, !!(pty & 0x80)); |
| v4l2_ctrl_s_ctrl(dev->rds_pty, (pty >> 2) & 0x1f); |
| } |
| } |
| if ((buf >> 4) & 1) { |
| res = rds_cmd(dev->aci, RDS_TEXT, text_buffer, 65); |
| text_buffer[65] = 0; |
| if (!res && sanitize(text_buffer + 1, 64)) |
| v4l2_ctrl_s_ctrl_string(dev->rds_radio_test, text_buffer + 1); |
| } |
| } |
| return 0; |
| } |
| |
| static int pcm20_open(struct file *file) |
| { |
| struct pcm20 *dev = video_drvdata(file); |
| int res = v4l2_fh_open(file); |
| |
| if (!res && v4l2_fh_is_singular_file(file) && |
| IS_ERR_OR_NULL(dev->kthread)) { |
| dev->kthread = kthread_run(pcm20_thread, dev, "%s", |
| dev->v4l2_dev.name); |
| if (IS_ERR(dev->kthread)) { |
| v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n"); |
| v4l2_fh_release(file); |
| return PTR_ERR(dev->kthread); |
| } |
| } |
| return res; |
| } |
| |
| static int pcm20_release(struct file *file) |
| { |
| struct pcm20 *dev = video_drvdata(file); |
| |
| if (v4l2_fh_is_singular_file(file) && !IS_ERR_OR_NULL(dev->kthread)) { |
| kthread_stop(dev->kthread); |
| dev->kthread = NULL; |
| } |
| return v4l2_fh_release(file); |
| } |
| |
| static const struct v4l2_file_operations pcm20_fops = { |
| .owner = THIS_MODULE, |
| .open = pcm20_open, |
| .poll = v4l2_ctrl_poll, |
| .release = pcm20_release, |
| .unlocked_ioctl = video_ioctl2, |
| }; |
| |
| static const struct v4l2_ioctl_ops pcm20_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| .vidioc_log_status = v4l2_ctrl_log_status, |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| }; |
| |
| static const struct v4l2_ctrl_ops pcm20_ctrl_ops = { |
| .s_ctrl = pcm20_s_ctrl, |
| }; |
| |
| static int __init pcm20_init(void) |
| { |
| struct pcm20 *dev = &pcm20_card; |
| struct v4l2_device *v4l2_dev = &dev->v4l2_dev; |
| struct v4l2_ctrl_handler *hdl; |
| int res; |
| |
| dev->aci = snd_aci_get_aci(); |
| if (dev->aci == NULL) { |
| v4l2_err(v4l2_dev, |
| "you must load the snd-miro driver first!\n"); |
| return -ENODEV; |
| } |
| strlcpy(v4l2_dev->name, "radio-miropcm20", sizeof(v4l2_dev->name)); |
| mutex_init(&dev->lock); |
| |
| res = v4l2_device_register(NULL, v4l2_dev); |
| if (res < 0) { |
| v4l2_err(v4l2_dev, "could not register v4l2_device\n"); |
| return -EINVAL; |
| } |
| |
| hdl = &dev->ctrl_handler; |
| v4l2_ctrl_handler_init(hdl, 7); |
| v4l2_ctrl_new_std(hdl, &pcm20_ctrl_ops, |
| V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); |
| dev->rds_pty = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_RDS_RX_PTY, 0, 0x1f, 1, 0); |
| dev->rds_ps_name = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_RDS_RX_PS_NAME, 0, 8, 8, 0); |
| dev->rds_radio_test = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_RDS_RX_RADIO_TEXT, 0, 64, 64, 0); |
| dev->rds_ta = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0); |
| dev->rds_tp = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_RDS_RX_TRAFFIC_PROGRAM, 0, 1, 1, 0); |
| dev->rds_ms = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_RDS_RX_MUSIC_SPEECH, 0, 1, 1, 1); |
| v4l2_dev->ctrl_handler = hdl; |
| if (hdl->error) { |
| res = hdl->error; |
| v4l2_err(v4l2_dev, "Could not register control\n"); |
| goto err_hdl; |
| } |
| strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); |
| dev->vdev.v4l2_dev = v4l2_dev; |
| dev->vdev.fops = &pcm20_fops; |
| dev->vdev.ioctl_ops = &pcm20_ioctl_ops; |
| dev->vdev.release = video_device_release_empty; |
| dev->vdev.lock = &dev->lock; |
| video_set_drvdata(&dev->vdev, dev); |
| snd_aci_cmd(dev->aci, ACI_SET_TUNERMONO, |
| dev->audmode == V4L2_TUNER_MODE_MONO, -1); |
| pcm20_setfreq(dev, dev->freq); |
| |
| if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) |
| goto err_hdl; |
| |
| v4l2_info(v4l2_dev, "Mirosound PCM20 Radio tuner\n"); |
| return 0; |
| err_hdl: |
| v4l2_ctrl_handler_free(hdl); |
| v4l2_device_unregister(v4l2_dev); |
| return -EINVAL; |
| } |
| |
| MODULE_AUTHOR("Ruurd Reitsma, Krzysztof Helt"); |
| MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card."); |
| MODULE_LICENSE("GPL"); |
| |
| static void __exit pcm20_cleanup(void) |
| { |
| struct pcm20 *dev = &pcm20_card; |
| |
| video_unregister_device(&dev->vdev); |
| snd_aci_cmd(dev->aci, ACI_SET_TUNERMUTE, 1, -1); |
| v4l2_ctrl_handler_free(&dev->ctrl_handler); |
| v4l2_device_unregister(&dev->v4l2_dev); |
| } |
| |
| module_init(pcm20_init); |
| module_exit(pcm20_cleanup); |