| /* |
| * Samsung s5h1432 DVB-T demodulator driver |
| * |
| * Copyright (C) 2009 Bill Liu <Bill.Liu@Conexant.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include "dvb_frontend.h" |
| #include "s5h1432.h" |
| |
| struct s5h1432_state { |
| |
| struct i2c_adapter *i2c; |
| |
| /* configuration settings */ |
| const struct s5h1432_config *config; |
| |
| struct dvb_frontend frontend; |
| |
| enum fe_modulation current_modulation; |
| unsigned int first_tune:1; |
| |
| u32 current_frequency; |
| int if_freq; |
| |
| u8 inversion; |
| }; |
| |
| static int debug; |
| |
| #define dprintk(arg...) do { \ |
| if (debug) \ |
| printk(arg); \ |
| } while (0) |
| |
| static int s5h1432_writereg(struct s5h1432_state *state, |
| u8 addr, u8 reg, u8 data) |
| { |
| int ret; |
| u8 buf[] = { reg, data }; |
| |
| struct i2c_msg msg = {.addr = addr, .flags = 0, .buf = buf, .len = 2 }; |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| |
| if (ret != 1) |
| printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n", |
| __func__, addr, reg, data, ret); |
| |
| return (ret != 1) ? -1 : 0; |
| } |
| |
| static u8 s5h1432_readreg(struct s5h1432_state *state, u8 addr, u8 reg) |
| { |
| int ret; |
| u8 b0[] = { reg }; |
| u8 b1[] = { 0 }; |
| |
| struct i2c_msg msg[] = { |
| {.addr = addr, .flags = 0, .buf = b0, .len = 1}, |
| {.addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 1} |
| }; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) |
| printk(KERN_ERR "%s: readreg error (ret == %i)\n", |
| __func__, ret); |
| return b1[0]; |
| } |
| |
| static int s5h1432_sleep(struct dvb_frontend *fe) |
| { |
| return 0; |
| } |
| |
| static int s5h1432_set_channel_bandwidth(struct dvb_frontend *fe, |
| u32 bandwidth) |
| { |
| struct s5h1432_state *state = fe->demodulator_priv; |
| |
| u8 reg = 0; |
| |
| /* Register [0x2E] bit 3:2 : 8MHz = 0; 7MHz = 1; 6MHz = 2 */ |
| reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x2E); |
| reg &= ~(0x0C); |
| switch (bandwidth) { |
| case 6: |
| reg |= 0x08; |
| break; |
| case 7: |
| reg |= 0x04; |
| break; |
| case 8: |
| reg |= 0x00; |
| break; |
| default: |
| return 0; |
| } |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2E, reg); |
| return 1; |
| } |
| |
| static int s5h1432_set_IF(struct dvb_frontend *fe, u32 ifFreqHz) |
| { |
| struct s5h1432_state *state = fe->demodulator_priv; |
| |
| switch (ifFreqHz) { |
| case TAIWAN_HI_IF_FREQ_44_MHZ: |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x15); |
| break; |
| case EUROPE_HI_IF_FREQ_36_MHZ: |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x40); |
| break; |
| case IF_FREQ_6_MHZ: |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xe0); |
| break; |
| case IF_FREQ_3point3_MHZ: |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE); |
| break; |
| case IF_FREQ_3point5_MHZ: |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xED); |
| break; |
| case IF_FREQ_4_MHZ: |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0xAA); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0xAA); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEA); |
| break; |
| default: |
| { |
| u32 value = 0; |
| value = (u32) (((48000 - (ifFreqHz / 1000)) * 512 * |
| (u32) 32768) / (48 * 1000)); |
| printk(KERN_INFO |
| "Default IFFreq %d :reg value = 0x%x\n", |
| ifFreqHz, value); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, |
| (u8) value & 0xFF); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, |
| (u8) (value >> 8) & 0xFF); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, |
| (u8) (value >> 16) & 0xFF); |
| break; |
| } |
| |
| } |
| |
| return 1; |
| } |
| |
| /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ |
| static int s5h1432_set_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| u32 dvb_bandwidth = 8; |
| struct s5h1432_state *state = fe->demodulator_priv; |
| |
| if (p->frequency == state->current_frequency) { |
| /*current_frequency = p->frequency; */ |
| /*state->current_frequency = p->frequency; */ |
| } else { |
| fe->ops.tuner_ops.set_params(fe); |
| msleep(300); |
| s5h1432_set_channel_bandwidth(fe, dvb_bandwidth); |
| switch (p->bandwidth_hz) { |
| case 6000000: |
| dvb_bandwidth = 6; |
| s5h1432_set_IF(fe, IF_FREQ_4_MHZ); |
| break; |
| case 7000000: |
| dvb_bandwidth = 7; |
| s5h1432_set_IF(fe, IF_FREQ_4_MHZ); |
| break; |
| case 8000000: |
| dvb_bandwidth = 8; |
| s5h1432_set_IF(fe, IF_FREQ_4_MHZ); |
| break; |
| default: |
| return 0; |
| } |
| /*fe->ops.tuner_ops.set_params(fe); */ |
| /*Soft Reset chip*/ |
| msleep(30); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); |
| msleep(30); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); |
| |
| s5h1432_set_channel_bandwidth(fe, dvb_bandwidth); |
| switch (p->bandwidth_hz) { |
| case 6000000: |
| dvb_bandwidth = 6; |
| s5h1432_set_IF(fe, IF_FREQ_4_MHZ); |
| break; |
| case 7000000: |
| dvb_bandwidth = 7; |
| s5h1432_set_IF(fe, IF_FREQ_4_MHZ); |
| break; |
| case 8000000: |
| dvb_bandwidth = 8; |
| s5h1432_set_IF(fe, IF_FREQ_4_MHZ); |
| break; |
| default: |
| return 0; |
| } |
| /*fe->ops.tuner_ops.set_params(fe); */ |
| /*Soft Reset chip*/ |
| msleep(30); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); |
| msleep(30); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); |
| |
| } |
| |
| state->current_frequency = p->frequency; |
| |
| return 0; |
| } |
| |
| static int s5h1432_init(struct dvb_frontend *fe) |
| { |
| struct s5h1432_state *state = fe->demodulator_priv; |
| |
| u8 reg = 0; |
| state->current_frequency = 0; |
| printk(KERN_INFO " s5h1432_init().\n"); |
| |
| /*Set VSB mode as default, this also does a soft reset */ |
| /*Initialize registers */ |
| |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x04, 0xa8); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x05, 0x01); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x07, 0x70); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x19, 0x80); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1b, 0x9D); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1c, 0x30); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1d, 0x20); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x1B); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2e, 0x40); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, 0x84); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x50, 0x5a); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x5a, 0xd3); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x68, 0x50); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xb8, 0x3c); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xc4, 0x10); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xcc, 0x9c); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xDA, 0x00); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe1, 0x94); |
| /* s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf4, 0xa1); */ |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf9, 0x00); |
| |
| /*For NXP tuner*/ |
| |
| /*Set 3.3MHz as default IF frequency */ |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE); |
| /* Set reg 0x1E to get the full dynamic range */ |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x31); |
| |
| /* Mode setting in demod */ |
| reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x42); |
| reg |= 0x80; |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, reg); |
| /* Serial mode */ |
| |
| /* Soft Reset chip */ |
| |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); |
| msleep(30); |
| s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); |
| |
| |
| return 0; |
| } |
| |
| static int s5h1432_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| return 0; |
| } |
| |
| static int s5h1432_read_signal_strength(struct dvb_frontend *fe, |
| u16 *signal_strength) |
| { |
| return 0; |
| } |
| |
| static int s5h1432_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| return 0; |
| } |
| |
| static int s5h1432_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| |
| return 0; |
| } |
| |
| static int s5h1432_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| return 0; |
| } |
| |
| static int s5h1432_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *tune) |
| { |
| return 0; |
| } |
| |
| static void s5h1432_release(struct dvb_frontend *fe) |
| { |
| struct s5h1432_state *state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static const struct dvb_frontend_ops s5h1432_ops; |
| |
| struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config, |
| struct i2c_adapter *i2c) |
| { |
| struct s5h1432_state *state = NULL; |
| |
| printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n"); |
| /* allocate memory for the internal state */ |
| state = kmalloc(sizeof(struct s5h1432_state), GFP_KERNEL); |
| if (!state) |
| return NULL; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| state->current_modulation = QAM_16; |
| state->inversion = state->config->inversion; |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &s5h1432_ops, |
| sizeof(struct dvb_frontend_ops)); |
| |
| state->frontend.demodulator_priv = state; |
| |
| return &state->frontend; |
| } |
| EXPORT_SYMBOL_GPL(s5h1432_attach); |
| |
| static const struct dvb_frontend_ops s5h1432_ops = { |
| .delsys = { SYS_DVBT }, |
| .info = { |
| .name = "Samsung s5h1432 DVB-T Frontend", |
| .frequency_min = 177000000, |
| .frequency_max = 858000000, |
| .frequency_stepsize = 166666, |
| .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | |
| FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER}, |
| |
| .init = s5h1432_init, |
| .sleep = s5h1432_sleep, |
| .set_frontend = s5h1432_set_frontend, |
| .get_tune_settings = s5h1432_get_tune_settings, |
| .read_status = s5h1432_read_status, |
| .read_ber = s5h1432_read_ber, |
| .read_signal_strength = s5h1432_read_signal_strength, |
| .read_snr = s5h1432_read_snr, |
| .read_ucblocks = s5h1432_read_ucblocks, |
| .release = s5h1432_release, |
| }; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Enable verbose debug messages"); |
| |
| MODULE_DESCRIPTION("Samsung s5h1432 DVB-T Demodulator driver"); |
| MODULE_AUTHOR("Bill Liu"); |
| MODULE_LICENSE("GPL"); |