| /* |
| * nct7904.c - driver for Nuvoton NCT7904D. |
| * |
| * Copyright (c) 2015 Kontron |
| * Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/mutex.h> |
| #include <linux/hwmon.h> |
| |
| #define VENDOR_ID_REG 0x7A /* Any bank */ |
| #define NUVOTON_ID 0x50 |
| #define CHIP_ID_REG 0x7B /* Any bank */ |
| #define NCT7904_ID 0xC5 |
| #define DEVICE_ID_REG 0x7C /* Any bank */ |
| |
| #define BANK_SEL_REG 0xFF |
| #define BANK_0 0x00 |
| #define BANK_1 0x01 |
| #define BANK_2 0x02 |
| #define BANK_3 0x03 |
| #define BANK_4 0x04 |
| #define BANK_MAX 0x04 |
| |
| #define FANIN_MAX 12 /* Counted from 1 */ |
| #define VSEN_MAX 21 /* VSEN1..14, 3VDD, VBAT, V3VSB, |
| LTD (not a voltage), VSEN17..19 */ |
| #define FANCTL_MAX 4 /* Counted from 1 */ |
| #define TCPU_MAX 8 /* Counted from 1 */ |
| #define TEMP_MAX 4 /* Counted from 1 */ |
| |
| #define VT_ADC_CTRL0_REG 0x20 /* Bank 0 */ |
| #define VT_ADC_CTRL1_REG 0x21 /* Bank 0 */ |
| #define VT_ADC_CTRL2_REG 0x22 /* Bank 0 */ |
| #define FANIN_CTRL0_REG 0x24 |
| #define FANIN_CTRL1_REG 0x25 |
| #define DTS_T_CTRL0_REG 0x26 |
| #define DTS_T_CTRL1_REG 0x27 |
| #define VT_ADC_MD_REG 0x2E |
| |
| #define VSEN1_HV_REG 0x40 /* Bank 0; 2 regs (HV/LV) per sensor */ |
| #define TEMP_CH1_HV_REG 0x42 /* Bank 0; same as VSEN2_HV */ |
| #define LTD_HV_REG 0x62 /* Bank 0; 2 regs in VSEN range */ |
| #define FANIN1_HV_REG 0x80 /* Bank 0; 2 regs (HV/LV) per sensor */ |
| #define T_CPU1_HV_REG 0xA0 /* Bank 0; 2 regs (HV/LV) per sensor */ |
| |
| #define PRTS_REG 0x03 /* Bank 2 */ |
| #define FANCTL1_FMR_REG 0x00 /* Bank 3; 1 reg per channel */ |
| #define FANCTL1_OUT_REG 0x10 /* Bank 3; 1 reg per channel */ |
| |
| static const unsigned short normal_i2c[] = { |
| 0x2d, 0x2e, I2C_CLIENT_END |
| }; |
| |
| struct nct7904_data { |
| struct i2c_client *client; |
| struct mutex bank_lock; |
| int bank_sel; |
| u32 fanin_mask; |
| u32 vsen_mask; |
| u32 tcpu_mask; |
| u8 fan_mode[FANCTL_MAX]; |
| }; |
| |
| /* Access functions */ |
| static int nct7904_bank_lock(struct nct7904_data *data, unsigned bank) |
| { |
| int ret; |
| |
| mutex_lock(&data->bank_lock); |
| if (data->bank_sel == bank) |
| return 0; |
| ret = i2c_smbus_write_byte_data(data->client, BANK_SEL_REG, bank); |
| if (ret == 0) |
| data->bank_sel = bank; |
| else |
| data->bank_sel = -1; |
| return ret; |
| } |
| |
| static inline void nct7904_bank_release(struct nct7904_data *data) |
| { |
| mutex_unlock(&data->bank_lock); |
| } |
| |
| /* Read 1-byte register. Returns unsigned reg or -ERRNO on error. */ |
| static int nct7904_read_reg(struct nct7904_data *data, |
| unsigned bank, unsigned reg) |
| { |
| struct i2c_client *client = data->client; |
| int ret; |
| |
| ret = nct7904_bank_lock(data, bank); |
| if (ret == 0) |
| ret = i2c_smbus_read_byte_data(client, reg); |
| |
| nct7904_bank_release(data); |
| return ret; |
| } |
| |
| /* |
| * Read 2-byte register. Returns register in big-endian format or |
| * -ERRNO on error. |
| */ |
| static int nct7904_read_reg16(struct nct7904_data *data, |
| unsigned bank, unsigned reg) |
| { |
| struct i2c_client *client = data->client; |
| int ret, hi; |
| |
| ret = nct7904_bank_lock(data, bank); |
| if (ret == 0) { |
| ret = i2c_smbus_read_byte_data(client, reg); |
| if (ret >= 0) { |
| hi = ret; |
| ret = i2c_smbus_read_byte_data(client, reg + 1); |
| if (ret >= 0) |
| ret |= hi << 8; |
| } |
| } |
| |
| nct7904_bank_release(data); |
| return ret; |
| } |
| |
| /* Write 1-byte register. Returns 0 or -ERRNO on error. */ |
| static int nct7904_write_reg(struct nct7904_data *data, |
| unsigned bank, unsigned reg, u8 val) |
| { |
| struct i2c_client *client = data->client; |
| int ret; |
| |
| ret = nct7904_bank_lock(data, bank); |
| if (ret == 0) |
| ret = i2c_smbus_write_byte_data(client, reg, val); |
| |
| nct7904_bank_release(data); |
| return ret; |
| } |
| |
| static int nct7904_read_fan(struct device *dev, u32 attr, int channel, |
| long *val) |
| { |
| struct nct7904_data *data = dev_get_drvdata(dev); |
| unsigned int cnt, rpm; |
| int ret; |
| |
| switch(attr) { |
| case hwmon_fan_input: |
| ret = nct7904_read_reg16(data, BANK_0, |
| FANIN1_HV_REG + channel * 2); |
| if (ret < 0) |
| return ret; |
| cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f); |
| if (cnt == 0x1fff) |
| rpm = 0; |
| else |
| rpm = 1350000 / cnt; |
| *val = rpm; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t nct7904_fan_is_visible(const void *_data, u32 attr, int channel) |
| { |
| const struct nct7904_data *data = _data; |
| |
| if (attr == hwmon_fan_input && data->fanin_mask & (1 << channel)) |
| return S_IRUGO; |
| return 0; |
| } |
| |
| static u8 nct7904_chan_to_index[] = { |
| 0, /* Not used */ |
| 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, |
| 18, 19, 20, 16 |
| }; |
| |
| static int nct7904_read_in(struct device *dev, u32 attr, int channel, |
| long *val) |
| { |
| struct nct7904_data *data = dev_get_drvdata(dev); |
| int ret, volt, index; |
| |
| index = nct7904_chan_to_index[channel]; |
| |
| switch(attr) { |
| case hwmon_in_input: |
| ret = nct7904_read_reg16(data, BANK_0, |
| VSEN1_HV_REG + index * 2); |
| if (ret < 0) |
| return ret; |
| volt = ((ret & 0xff00) >> 5) | (ret & 0x7); |
| if (index < 14) |
| volt *= 2; /* 0.002V scale */ |
| else |
| volt *= 6; /* 0.006V scale */ |
| *val = volt; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t nct7904_in_is_visible(const void *_data, u32 attr, int channel) |
| { |
| const struct nct7904_data *data = _data; |
| int index = nct7904_chan_to_index[channel]; |
| |
| if (channel > 0 && attr == hwmon_in_input && |
| (data->vsen_mask & BIT(index))) |
| return S_IRUGO; |
| |
| return 0; |
| } |
| |
| static int nct7904_read_temp(struct device *dev, u32 attr, int channel, |
| long *val) |
| { |
| struct nct7904_data *data = dev_get_drvdata(dev); |
| int ret, temp; |
| |
| switch(attr) { |
| case hwmon_temp_input: |
| if (channel == 0) |
| ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG); |
| else |
| ret = nct7904_read_reg16(data, BANK_0, |
| T_CPU1_HV_REG + (channel - 1) * 2); |
| if (ret < 0) |
| return ret; |
| temp = ((ret & 0xff00) >> 5) | (ret & 0x7); |
| *val = sign_extend32(temp, 10) * 125; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel) |
| { |
| const struct nct7904_data *data = _data; |
| |
| if (attr == hwmon_temp_input) { |
| if (channel == 0) { |
| if (data->vsen_mask & BIT(17)) |
| return S_IRUGO; |
| } else { |
| if (data->tcpu_mask & BIT(channel - 1)) |
| return S_IRUGO; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int nct7904_read_pwm(struct device *dev, u32 attr, int channel, |
| long *val) |
| { |
| struct nct7904_data *data = dev_get_drvdata(dev); |
| int ret; |
| |
| switch(attr) { |
| case hwmon_pwm_input: |
| ret = nct7904_read_reg(data, BANK_3, FANCTL1_OUT_REG + channel); |
| if (ret < 0) |
| return ret; |
| *val = ret; |
| return 0; |
| case hwmon_pwm_enable: |
| ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + channel); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret ? 2 : 1; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int nct7904_write_pwm(struct device *dev, u32 attr, int channel, |
| long val) |
| { |
| struct nct7904_data *data = dev_get_drvdata(dev); |
| int ret; |
| |
| switch(attr) { |
| case hwmon_pwm_input: |
| if (val < 0 || val > 255) |
| return -EINVAL; |
| ret = nct7904_write_reg(data, BANK_3, FANCTL1_OUT_REG + channel, |
| val); |
| return ret; |
| case hwmon_pwm_enable: |
| if (val < 1 || val > 2 || |
| (val == 2 && !data->fan_mode[channel])) |
| return -EINVAL; |
| ret = nct7904_write_reg(data, BANK_3, FANCTL1_FMR_REG + channel, |
| val == 2 ? data->fan_mode[channel] : 0); |
| return ret; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t nct7904_pwm_is_visible(const void *_data, u32 attr, int channel) |
| { |
| switch(attr) { |
| case hwmon_pwm_input: |
| case hwmon_pwm_enable: |
| return S_IRUGO | S_IWUSR; |
| default: |
| return 0; |
| } |
| } |
| |
| static int nct7904_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| switch (type) { |
| case hwmon_in: |
| return nct7904_read_in(dev, attr, channel, val); |
| case hwmon_fan: |
| return nct7904_read_fan(dev, attr, channel, val); |
| case hwmon_pwm: |
| return nct7904_read_pwm(dev, attr, channel, val); |
| case hwmon_temp: |
| return nct7904_read_temp(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int nct7904_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long val) |
| { |
| switch (type) { |
| case hwmon_pwm: |
| return nct7904_write_pwm(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t nct7904_is_visible(const void *data, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| switch (type) { |
| case hwmon_in: |
| return nct7904_in_is_visible(data, attr, channel); |
| case hwmon_fan: |
| return nct7904_fan_is_visible(data, attr, channel); |
| case hwmon_pwm: |
| return nct7904_pwm_is_visible(data, attr, channel); |
| case hwmon_temp: |
| return nct7904_temp_is_visible(data, attr, channel); |
| default: |
| return 0; |
| } |
| } |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int nct7904_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| |
| if (!i2c_check_functionality(adapter, |
| I2C_FUNC_SMBUS_READ_BYTE | |
| I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) |
| return -ENODEV; |
| |
| /* Determine the chip type. */ |
| if (i2c_smbus_read_byte_data(client, VENDOR_ID_REG) != NUVOTON_ID || |
| i2c_smbus_read_byte_data(client, CHIP_ID_REG) != NCT7904_ID || |
| (i2c_smbus_read_byte_data(client, DEVICE_ID_REG) & 0xf0) != 0x50 || |
| (i2c_smbus_read_byte_data(client, BANK_SEL_REG) & 0xf8) != 0x00) |
| return -ENODEV; |
| |
| strlcpy(info->type, "nct7904", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static const u32 nct7904_in_config[] = { |
| HWMON_I_INPUT, /* dummy, skipped in is_visible */ |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| HWMON_I_INPUT, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info nct7904_in = { |
| .type = hwmon_in, |
| .config = nct7904_in_config, |
| }; |
| |
| static const u32 nct7904_fan_config[] = { |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info nct7904_fan = { |
| .type = hwmon_fan, |
| .config = nct7904_fan_config, |
| }; |
| |
| static const u32 nct7904_pwm_config[] = { |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info nct7904_pwm = { |
| .type = hwmon_pwm, |
| .config = nct7904_pwm_config, |
| }; |
| |
| static const u32 nct7904_temp_config[] = { |
| HWMON_T_INPUT, |
| HWMON_T_INPUT, |
| HWMON_T_INPUT, |
| HWMON_T_INPUT, |
| HWMON_T_INPUT, |
| HWMON_T_INPUT, |
| HWMON_T_INPUT, |
| HWMON_T_INPUT, |
| HWMON_T_INPUT, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info nct7904_temp = { |
| .type = hwmon_temp, |
| .config = nct7904_temp_config, |
| }; |
| |
| static const struct hwmon_channel_info *nct7904_info[] = { |
| &nct7904_in, |
| &nct7904_fan, |
| &nct7904_pwm, |
| &nct7904_temp, |
| NULL |
| }; |
| |
| static const struct hwmon_ops nct7904_hwmon_ops = { |
| .is_visible = nct7904_is_visible, |
| .read = nct7904_read, |
| .write = nct7904_write, |
| }; |
| |
| static const struct hwmon_chip_info nct7904_chip_info = { |
| .ops = &nct7904_hwmon_ops, |
| .info = nct7904_info, |
| }; |
| |
| static int nct7904_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct nct7904_data *data; |
| struct device *hwmon_dev; |
| struct device *dev = &client->dev; |
| int ret, i; |
| u32 mask; |
| |
| data = devm_kzalloc(dev, sizeof(struct nct7904_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->client = client; |
| mutex_init(&data->bank_lock); |
| data->bank_sel = -1; |
| |
| /* Setup sensor groups. */ |
| /* FANIN attributes */ |
| ret = nct7904_read_reg16(data, BANK_0, FANIN_CTRL0_REG); |
| if (ret < 0) |
| return ret; |
| data->fanin_mask = (ret >> 8) | ((ret & 0xff) << 8); |
| |
| /* |
| * VSEN attributes |
| * |
| * Note: voltage sensors overlap with external temperature |
| * sensors. So, if we ever decide to support the latter |
| * we will have to adjust 'vsen_mask' accordingly. |
| */ |
| mask = 0; |
| ret = nct7904_read_reg16(data, BANK_0, VT_ADC_CTRL0_REG); |
| if (ret >= 0) |
| mask = (ret >> 8) | ((ret & 0xff) << 8); |
| ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL2_REG); |
| if (ret >= 0) |
| mask |= (ret << 16); |
| data->vsen_mask = mask; |
| |
| /* CPU_TEMP attributes */ |
| ret = nct7904_read_reg16(data, BANK_0, DTS_T_CTRL0_REG); |
| if (ret < 0) |
| return ret; |
| data->tcpu_mask = ((ret >> 8) & 0xf) | ((ret & 0xf) << 4); |
| |
| for (i = 0; i < FANCTL_MAX; i++) { |
| ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + i); |
| if (ret < 0) |
| return ret; |
| data->fan_mode[i] = ret; |
| } |
| |
| hwmon_dev = |
| devm_hwmon_device_register_with_info(dev, client->name, data, |
| &nct7904_chip_info, NULL); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct i2c_device_id nct7904_id[] = { |
| {"nct7904", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, nct7904_id); |
| |
| static struct i2c_driver nct7904_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "nct7904", |
| }, |
| .probe = nct7904_probe, |
| .id_table = nct7904_id, |
| .detect = nct7904_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| module_i2c_driver(nct7904_driver); |
| |
| MODULE_AUTHOR("Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>"); |
| MODULE_DESCRIPTION("Hwmon driver for NUVOTON NCT7904"); |
| MODULE_LICENSE("GPL"); |