| /* |
| * Performance counter support for POWER4 (GP) and POWER4+ (GQ) processors. |
| * |
| * Copyright 2009 Paul Mackerras, IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/perf_event.h> |
| #include <linux/string.h> |
| #include <asm/reg.h> |
| #include <asm/cputable.h> |
| |
| /* |
| * Bits in event code for POWER4 |
| */ |
| #define PM_PMC_SH 12 /* PMC number (1-based) for direct events */ |
| #define PM_PMC_MSK 0xf |
| #define PM_UNIT_SH 8 /* TTMMUX number and setting - unit select */ |
| #define PM_UNIT_MSK 0xf |
| #define PM_LOWER_SH 6 |
| #define PM_LOWER_MSK 1 |
| #define PM_LOWER_MSKS 0x40 |
| #define PM_BYTE_SH 4 /* Byte number of event bus to use */ |
| #define PM_BYTE_MSK 3 |
| #define PM_PMCSEL_MSK 7 |
| |
| /* |
| * Unit code values |
| */ |
| #define PM_FPU 1 |
| #define PM_ISU1 2 |
| #define PM_IFU 3 |
| #define PM_IDU0 4 |
| #define PM_ISU1_ALT 6 |
| #define PM_ISU2 7 |
| #define PM_IFU_ALT 8 |
| #define PM_LSU0 9 |
| #define PM_LSU1 0xc |
| #define PM_GPS 0xf |
| |
| /* |
| * Bits in MMCR0 for POWER4 |
| */ |
| #define MMCR0_PMC1SEL_SH 8 |
| #define MMCR0_PMC2SEL_SH 1 |
| #define MMCR_PMCSEL_MSK 0x1f |
| |
| /* |
| * Bits in MMCR1 for POWER4 |
| */ |
| #define MMCR1_TTM0SEL_SH 62 |
| #define MMCR1_TTC0SEL_SH 61 |
| #define MMCR1_TTM1SEL_SH 59 |
| #define MMCR1_TTC1SEL_SH 58 |
| #define MMCR1_TTM2SEL_SH 56 |
| #define MMCR1_TTC2SEL_SH 55 |
| #define MMCR1_TTM3SEL_SH 53 |
| #define MMCR1_TTC3SEL_SH 52 |
| #define MMCR1_TTMSEL_MSK 3 |
| #define MMCR1_TD_CP_DBG0SEL_SH 50 |
| #define MMCR1_TD_CP_DBG1SEL_SH 48 |
| #define MMCR1_TD_CP_DBG2SEL_SH 46 |
| #define MMCR1_TD_CP_DBG3SEL_SH 44 |
| #define MMCR1_DEBUG0SEL_SH 43 |
| #define MMCR1_DEBUG1SEL_SH 42 |
| #define MMCR1_DEBUG2SEL_SH 41 |
| #define MMCR1_DEBUG3SEL_SH 40 |
| #define MMCR1_PMC1_ADDER_SEL_SH 39 |
| #define MMCR1_PMC2_ADDER_SEL_SH 38 |
| #define MMCR1_PMC6_ADDER_SEL_SH 37 |
| #define MMCR1_PMC5_ADDER_SEL_SH 36 |
| #define MMCR1_PMC8_ADDER_SEL_SH 35 |
| #define MMCR1_PMC7_ADDER_SEL_SH 34 |
| #define MMCR1_PMC3_ADDER_SEL_SH 33 |
| #define MMCR1_PMC4_ADDER_SEL_SH 32 |
| #define MMCR1_PMC3SEL_SH 27 |
| #define MMCR1_PMC4SEL_SH 22 |
| #define MMCR1_PMC5SEL_SH 17 |
| #define MMCR1_PMC6SEL_SH 12 |
| #define MMCR1_PMC7SEL_SH 7 |
| #define MMCR1_PMC8SEL_SH 2 /* note bit 0 is in MMCRA for GP */ |
| |
| static short mmcr1_adder_bits[8] = { |
| MMCR1_PMC1_ADDER_SEL_SH, |
| MMCR1_PMC2_ADDER_SEL_SH, |
| MMCR1_PMC3_ADDER_SEL_SH, |
| MMCR1_PMC4_ADDER_SEL_SH, |
| MMCR1_PMC5_ADDER_SEL_SH, |
| MMCR1_PMC6_ADDER_SEL_SH, |
| MMCR1_PMC7_ADDER_SEL_SH, |
| MMCR1_PMC8_ADDER_SEL_SH |
| }; |
| |
| /* |
| * Bits in MMCRA |
| */ |
| #define MMCRA_PMC8SEL0_SH 17 /* PMC8SEL bit 0 for GP */ |
| |
| /* |
| * Layout of constraint bits: |
| * 6666555555555544444444443333333333222222222211111111110000000000 |
| * 3210987654321098765432109876543210987654321098765432109876543210 |
| * |[ >[ >[ >|||[ >[ >< >< >< >< ><><><><><><><><> |
| * | UC1 UC2 UC3 ||| PS1 PS2 B0 B1 B2 B3 P1P2P3P4P5P6P7P8 |
| * \SMPL ||\TTC3SEL |
| * |\TTC_IFU_SEL |
| * \TTM2SEL0 |
| * |
| * SMPL - SAMPLE_ENABLE constraint |
| * 56: SAMPLE_ENABLE value 0x0100_0000_0000_0000 |
| * |
| * UC1 - unit constraint 1: can't have all three of FPU/ISU1/IDU0|ISU2 |
| * 55: UC1 error 0x0080_0000_0000_0000 |
| * 54: FPU events needed 0x0040_0000_0000_0000 |
| * 53: ISU1 events needed 0x0020_0000_0000_0000 |
| * 52: IDU0|ISU2 events needed 0x0010_0000_0000_0000 |
| * |
| * UC2 - unit constraint 2: can't have all three of FPU/IFU/LSU0 |
| * 51: UC2 error 0x0008_0000_0000_0000 |
| * 50: FPU events needed 0x0004_0000_0000_0000 |
| * 49: IFU events needed 0x0002_0000_0000_0000 |
| * 48: LSU0 events needed 0x0001_0000_0000_0000 |
| * |
| * UC3 - unit constraint 3: can't have all four of LSU0/IFU/IDU0|ISU2/ISU1 |
| * 47: UC3 error 0x8000_0000_0000 |
| * 46: LSU0 events needed 0x4000_0000_0000 |
| * 45: IFU events needed 0x2000_0000_0000 |
| * 44: IDU0|ISU2 events needed 0x1000_0000_0000 |
| * 43: ISU1 events needed 0x0800_0000_0000 |
| * |
| * TTM2SEL0 |
| * 42: 0 = IDU0 events needed |
| * 1 = ISU2 events needed 0x0400_0000_0000 |
| * |
| * TTC_IFU_SEL |
| * 41: 0 = IFU.U events needed |
| * 1 = IFU.L events needed 0x0200_0000_0000 |
| * |
| * TTC3SEL |
| * 40: 0 = LSU1.U events needed |
| * 1 = LSU1.L events needed 0x0100_0000_0000 |
| * |
| * PS1 |
| * 39: PS1 error 0x0080_0000_0000 |
| * 36-38: count of events needing PMC1/2/5/6 0x0070_0000_0000 |
| * |
| * PS2 |
| * 35: PS2 error 0x0008_0000_0000 |
| * 32-34: count of events needing PMC3/4/7/8 0x0007_0000_0000 |
| * |
| * B0 |
| * 28-31: Byte 0 event source 0xf000_0000 |
| * 1 = FPU |
| * 2 = ISU1 |
| * 3 = IFU |
| * 4 = IDU0 |
| * 7 = ISU2 |
| * 9 = LSU0 |
| * c = LSU1 |
| * f = GPS |
| * |
| * B1, B2, B3 |
| * 24-27, 20-23, 16-19: Byte 1, 2, 3 event sources |
| * |
| * P8 |
| * 15: P8 error 0x8000 |
| * 14-15: Count of events needing PMC8 |
| * |
| * P1..P7 |
| * 0-13: Count of events needing PMC1..PMC7 |
| * |
| * Note: this doesn't allow events using IFU.U to be combined with events |
| * using IFU.L, though that is feasible (using TTM0 and TTM2). However |
| * there are no listed events for IFU.L (they are debug events not |
| * verified for performance monitoring) so this shouldn't cause a |
| * problem. |
| */ |
| |
| static struct unitinfo { |
| unsigned long value, mask; |
| int unit; |
| int lowerbit; |
| } p4_unitinfo[16] = { |
| [PM_FPU] = { 0x44000000000000ul, 0x88000000000000ul, PM_FPU, 0 }, |
| [PM_ISU1] = { 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 }, |
| [PM_ISU1_ALT] = |
| { 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 }, |
| [PM_IFU] = { 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 }, |
| [PM_IFU_ALT] = |
| { 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 }, |
| [PM_IDU0] = { 0x10100000000000ul, 0x80840000000000ul, PM_IDU0, 1 }, |
| [PM_ISU2] = { 0x10140000000000ul, 0x80840000000000ul, PM_ISU2, 0 }, |
| [PM_LSU0] = { 0x01400000000000ul, 0x08800000000000ul, PM_LSU0, 0 }, |
| [PM_LSU1] = { 0x00000000000000ul, 0x00010000000000ul, PM_LSU1, 40 }, |
| [PM_GPS] = { 0x00000000000000ul, 0x00000000000000ul, PM_GPS, 0 } |
| }; |
| |
| static unsigned char direct_marked_event[8] = { |
| (1<<2) | (1<<3), /* PMC1: PM_MRK_GRP_DISP, PM_MRK_ST_CMPL */ |
| (1<<3) | (1<<5), /* PMC2: PM_THRESH_TIMEO, PM_MRK_BRU_FIN */ |
| (1<<3), /* PMC3: PM_MRK_ST_CMPL_INT */ |
| (1<<4) | (1<<5), /* PMC4: PM_MRK_GRP_CMPL, PM_MRK_CRU_FIN */ |
| (1<<4) | (1<<5), /* PMC5: PM_MRK_GRP_TIMEO */ |
| (1<<3) | (1<<4) | (1<<5), |
| /* PMC6: PM_MRK_ST_GPS, PM_MRK_FXU_FIN, PM_MRK_GRP_ISSUED */ |
| (1<<4) | (1<<5), /* PMC7: PM_MRK_FPU_FIN, PM_MRK_INST_FIN */ |
| (1<<4), /* PMC8: PM_MRK_LSU_FIN */ |
| }; |
| |
| /* |
| * Returns 1 if event counts things relating to marked instructions |
| * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. |
| */ |
| static int p4_marked_instr_event(u64 event) |
| { |
| int pmc, psel, unit, byte, bit; |
| unsigned int mask; |
| |
| pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; |
| psel = event & PM_PMCSEL_MSK; |
| if (pmc) { |
| if (direct_marked_event[pmc - 1] & (1 << psel)) |
| return 1; |
| if (psel == 0) /* add events */ |
| bit = (pmc <= 4)? pmc - 1: 8 - pmc; |
| else if (psel == 6) /* decode events */ |
| bit = 4; |
| else |
| return 0; |
| } else |
| bit = psel; |
| |
| byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; |
| unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; |
| mask = 0; |
| switch (unit) { |
| case PM_LSU1: |
| if (event & PM_LOWER_MSKS) |
| mask = 1 << 28; /* byte 7 bit 4 */ |
| else |
| mask = 6 << 24; /* byte 3 bits 1 and 2 */ |
| break; |
| case PM_LSU0: |
| /* byte 3, bit 3; byte 2 bits 0,2,3,4,5; byte 1 */ |
| mask = 0x083dff00; |
| } |
| return (mask >> (byte * 8 + bit)) & 1; |
| } |
| |
| static int p4_get_constraint(u64 event, unsigned long *maskp, |
| unsigned long *valp) |
| { |
| int pmc, byte, unit, lower, sh; |
| unsigned long mask = 0, value = 0; |
| int grp = -1; |
| |
| pmc = (event >> PM_PMC_SH) & PM_PMC_MSK; |
| if (pmc) { |
| if (pmc > 8) |
| return -1; |
| sh = (pmc - 1) * 2; |
| mask |= 2 << sh; |
| value |= 1 << sh; |
| grp = ((pmc - 1) >> 1) & 1; |
| } |
| unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK; |
| byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK; |
| if (unit) { |
| lower = (event >> PM_LOWER_SH) & PM_LOWER_MSK; |
| |
| /* |
| * Bus events on bytes 0 and 2 can be counted |
| * on PMC1/2/5/6; bytes 1 and 3 on PMC3/4/7/8. |
| */ |
| if (!pmc) |
| grp = byte & 1; |
| |
| if (!p4_unitinfo[unit].unit) |
| return -1; |
| mask |= p4_unitinfo[unit].mask; |
| value |= p4_unitinfo[unit].value; |
| sh = p4_unitinfo[unit].lowerbit; |
| if (sh > 1) |
| value |= (unsigned long)lower << sh; |
| else if (lower != sh) |
| return -1; |
| unit = p4_unitinfo[unit].unit; |
| |
| /* Set byte lane select field */ |
| mask |= 0xfULL << (28 - 4 * byte); |
| value |= (unsigned long)unit << (28 - 4 * byte); |
| } |
| if (grp == 0) { |
| /* increment PMC1/2/5/6 field */ |
| mask |= 0x8000000000ull; |
| value |= 0x1000000000ull; |
| } else { |
| /* increment PMC3/4/7/8 field */ |
| mask |= 0x800000000ull; |
| value |= 0x100000000ull; |
| } |
| |
| /* Marked instruction events need sample_enable set */ |
| if (p4_marked_instr_event(event)) { |
| mask |= 1ull << 56; |
| value |= 1ull << 56; |
| } |
| |
| /* PMCSEL=6 decode events on byte 2 need sample_enable clear */ |
| if (pmc && (event & PM_PMCSEL_MSK) == 6 && byte == 2) |
| mask |= 1ull << 56; |
| |
| *maskp = mask; |
| *valp = value; |
| return 0; |
| } |
| |
| static unsigned int ppc_inst_cmpl[] = { |
| 0x1001, 0x4001, 0x6001, 0x7001, 0x8001 |
| }; |
| |
| static int p4_get_alternatives(u64 event, unsigned int flags, u64 alt[]) |
| { |
| int i, j, na; |
| |
| alt[0] = event; |
| na = 1; |
| |
| /* 2 possibilities for PM_GRP_DISP_REJECT */ |
| if (event == 0x8003 || event == 0x0224) { |
| alt[1] = event ^ (0x8003 ^ 0x0224); |
| return 2; |
| } |
| |
| /* 2 possibilities for PM_ST_MISS_L1 */ |
| if (event == 0x0c13 || event == 0x0c23) { |
| alt[1] = event ^ (0x0c13 ^ 0x0c23); |
| return 2; |
| } |
| |
| /* several possibilities for PM_INST_CMPL */ |
| for (i = 0; i < ARRAY_SIZE(ppc_inst_cmpl); ++i) { |
| if (event == ppc_inst_cmpl[i]) { |
| for (j = 0; j < ARRAY_SIZE(ppc_inst_cmpl); ++j) |
| if (j != i) |
| alt[na++] = ppc_inst_cmpl[j]; |
| break; |
| } |
| } |
| |
| return na; |
| } |
| |
| static int p4_compute_mmcr(u64 event[], int n_ev, |
| unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[]) |
| { |
| unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0; |
| unsigned int pmc, unit, byte, psel, lower; |
| unsigned int ttm, grp; |
| unsigned int pmc_inuse = 0; |
| unsigned int pmc_grp_use[2]; |
| unsigned char busbyte[4]; |
| unsigned char unituse[16]; |
| unsigned int unitlower = 0; |
| int i; |
| |
| if (n_ev > 8) |
| return -1; |
| |
| /* First pass to count resource use */ |
| pmc_grp_use[0] = pmc_grp_use[1] = 0; |
| memset(busbyte, 0, sizeof(busbyte)); |
| memset(unituse, 0, sizeof(unituse)); |
| for (i = 0; i < n_ev; ++i) { |
| pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; |
| if (pmc) { |
| if (pmc_inuse & (1 << (pmc - 1))) |
| return -1; |
| pmc_inuse |= 1 << (pmc - 1); |
| /* count 1/2/5/6 vs 3/4/7/8 use */ |
| ++pmc_grp_use[((pmc - 1) >> 1) & 1]; |
| } |
| unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; |
| byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; |
| lower = (event[i] >> PM_LOWER_SH) & PM_LOWER_MSK; |
| if (unit) { |
| if (!pmc) |
| ++pmc_grp_use[byte & 1]; |
| if (unit == 6 || unit == 8) |
| /* map alt ISU1/IFU codes: 6->2, 8->3 */ |
| unit = (unit >> 1) - 1; |
| if (busbyte[byte] && busbyte[byte] != unit) |
| return -1; |
| busbyte[byte] = unit; |
| lower <<= unit; |
| if (unituse[unit] && lower != (unitlower & lower)) |
| return -1; |
| unituse[unit] = 1; |
| unitlower |= lower; |
| } |
| } |
| if (pmc_grp_use[0] > 4 || pmc_grp_use[1] > 4) |
| return -1; |
| |
| /* |
| * Assign resources and set multiplexer selects. |
| * |
| * Units 1,2,3 are on TTM0, 4,6,7 on TTM1, 8,10 on TTM2. |
| * Each TTMx can only select one unit, but since |
| * units 2 and 6 are both ISU1, and 3 and 8 are both IFU, |
| * we have some choices. |
| */ |
| if (unituse[2] & (unituse[1] | (unituse[3] & unituse[9]))) { |
| unituse[6] = 1; /* Move 2 to 6 */ |
| unituse[2] = 0; |
| } |
| if (unituse[3] & (unituse[1] | unituse[2])) { |
| unituse[8] = 1; /* Move 3 to 8 */ |
| unituse[3] = 0; |
| unitlower = (unitlower & ~8) | ((unitlower & 8) << 5); |
| } |
| /* Check only one unit per TTMx */ |
| if (unituse[1] + unituse[2] + unituse[3] > 1 || |
| unituse[4] + unituse[6] + unituse[7] > 1 || |
| unituse[8] + unituse[9] > 1 || |
| (unituse[5] | unituse[10] | unituse[11] | |
| unituse[13] | unituse[14])) |
| return -1; |
| |
| /* Set TTMxSEL fields. Note, units 1-3 => TTM0SEL codes 0-2 */ |
| mmcr1 |= (unsigned long)(unituse[3] * 2 + unituse[2]) |
| << MMCR1_TTM0SEL_SH; |
| mmcr1 |= (unsigned long)(unituse[7] * 3 + unituse[6] * 2) |
| << MMCR1_TTM1SEL_SH; |
| mmcr1 |= (unsigned long)unituse[9] << MMCR1_TTM2SEL_SH; |
| |
| /* Set TTCxSEL fields. */ |
| if (unitlower & 0xe) |
| mmcr1 |= 1ull << MMCR1_TTC0SEL_SH; |
| if (unitlower & 0xf0) |
| mmcr1 |= 1ull << MMCR1_TTC1SEL_SH; |
| if (unitlower & 0xf00) |
| mmcr1 |= 1ull << MMCR1_TTC2SEL_SH; |
| if (unitlower & 0x7000) |
| mmcr1 |= 1ull << MMCR1_TTC3SEL_SH; |
| |
| /* Set byte lane select fields. */ |
| for (byte = 0; byte < 4; ++byte) { |
| unit = busbyte[byte]; |
| if (!unit) |
| continue; |
| if (unit == 0xf) { |
| /* special case for GPS */ |
| mmcr1 |= 1ull << (MMCR1_DEBUG0SEL_SH - byte); |
| } else { |
| if (!unituse[unit]) |
| ttm = unit - 1; /* 2->1, 3->2 */ |
| else |
| ttm = unit >> 2; |
| mmcr1 |= (unsigned long)ttm |
| << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte); |
| } |
| } |
| |
| /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */ |
| for (i = 0; i < n_ev; ++i) { |
| pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK; |
| unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK; |
| byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK; |
| psel = event[i] & PM_PMCSEL_MSK; |
| if (!pmc) { |
| /* Bus event or 00xxx direct event (off or cycles) */ |
| if (unit) |
| psel |= 0x10 | ((byte & 2) << 2); |
| for (pmc = 0; pmc < 8; ++pmc) { |
| if (pmc_inuse & (1 << pmc)) |
| continue; |
| grp = (pmc >> 1) & 1; |
| if (unit) { |
| if (grp == (byte & 1)) |
| break; |
| } else if (pmc_grp_use[grp] < 4) { |
| ++pmc_grp_use[grp]; |
| break; |
| } |
| } |
| pmc_inuse |= 1 << pmc; |
| } else { |
| /* Direct event */ |
| --pmc; |
| if (psel == 0 && (byte & 2)) |
| /* add events on higher-numbered bus */ |
| mmcr1 |= 1ull << mmcr1_adder_bits[pmc]; |
| else if (psel == 6 && byte == 3) |
| /* seem to need to set sample_enable here */ |
| mmcra |= MMCRA_SAMPLE_ENABLE; |
| psel |= 8; |
| } |
| if (pmc <= 1) |
| mmcr0 |= psel << (MMCR0_PMC1SEL_SH - 7 * pmc); |
| else |
| mmcr1 |= psel << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)); |
| if (pmc == 7) /* PMC8 */ |
| mmcra |= (psel & 1) << MMCRA_PMC8SEL0_SH; |
| hwc[i] = pmc; |
| if (p4_marked_instr_event(event[i])) |
| mmcra |= MMCRA_SAMPLE_ENABLE; |
| } |
| |
| if (pmc_inuse & 1) |
| mmcr0 |= MMCR0_PMC1CE; |
| if (pmc_inuse & 0xfe) |
| mmcr0 |= MMCR0_PMCjCE; |
| |
| mmcra |= 0x2000; /* mark only one IOP per PPC instruction */ |
| |
| /* Return MMCRx values */ |
| mmcr[0] = mmcr0; |
| mmcr[1] = mmcr1; |
| mmcr[2] = mmcra; |
| return 0; |
| } |
| |
| static void p4_disable_pmc(unsigned int pmc, unsigned long mmcr[]) |
| { |
| /* |
| * Setting the PMCxSEL field to 0 disables PMC x. |
| * (Note that pmc is 0-based here, not 1-based.) |
| */ |
| if (pmc <= 1) { |
| mmcr[0] &= ~(0x1fUL << (MMCR0_PMC1SEL_SH - 7 * pmc)); |
| } else { |
| mmcr[1] &= ~(0x1fUL << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2))); |
| if (pmc == 7) |
| mmcr[2] &= ~(1UL << MMCRA_PMC8SEL0_SH); |
| } |
| } |
| |
| static int p4_generic_events[] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = 7, |
| [PERF_COUNT_HW_INSTRUCTIONS] = 0x1001, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = 0x8c10, /* PM_LD_REF_L1 */ |
| [PERF_COUNT_HW_CACHE_MISSES] = 0x3c10, /* PM_LD_MISS_L1 */ |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x330, /* PM_BR_ISSUED */ |
| [PERF_COUNT_HW_BRANCH_MISSES] = 0x331, /* PM_BR_MPRED_CR */ |
| }; |
| |
| #define C(x) PERF_COUNT_HW_CACHE_##x |
| |
| /* |
| * Table of generalized cache-related events. |
| * 0 means not supported, -1 means nonsensical, other values |
| * are event codes. |
| */ |
| static int power4_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { |
| [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ |
| [C(OP_READ)] = { 0x8c10, 0x3c10 }, |
| [C(OP_WRITE)] = { 0x7c10, 0xc13 }, |
| [C(OP_PREFETCH)] = { 0xc35, 0 }, |
| }, |
| [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ |
| [C(OP_READ)] = { 0, 0 }, |
| [C(OP_WRITE)] = { -1, -1 }, |
| [C(OP_PREFETCH)] = { 0, 0 }, |
| }, |
| [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ |
| [C(OP_READ)] = { 0, 0 }, |
| [C(OP_WRITE)] = { 0, 0 }, |
| [C(OP_PREFETCH)] = { 0xc34, 0 }, |
| }, |
| [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ |
| [C(OP_READ)] = { 0, 0x904 }, |
| [C(OP_WRITE)] = { -1, -1 }, |
| [C(OP_PREFETCH)] = { -1, -1 }, |
| }, |
| [C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */ |
| [C(OP_READ)] = { 0, 0x900 }, |
| [C(OP_WRITE)] = { -1, -1 }, |
| [C(OP_PREFETCH)] = { -1, -1 }, |
| }, |
| [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ |
| [C(OP_READ)] = { 0x330, 0x331 }, |
| [C(OP_WRITE)] = { -1, -1 }, |
| [C(OP_PREFETCH)] = { -1, -1 }, |
| }, |
| [C(NODE)] = { /* RESULT_ACCESS RESULT_MISS */ |
| [C(OP_READ)] = { -1, -1 }, |
| [C(OP_WRITE)] = { -1, -1 }, |
| [C(OP_PREFETCH)] = { -1, -1 }, |
| }, |
| }; |
| |
| static struct power_pmu power4_pmu = { |
| .name = "POWER4/4+", |
| .n_counter = 8, |
| .max_alternatives = 5, |
| .add_fields = 0x0000001100005555ul, |
| .test_adder = 0x0011083300000000ul, |
| .compute_mmcr = p4_compute_mmcr, |
| .get_constraint = p4_get_constraint, |
| .get_alternatives = p4_get_alternatives, |
| .disable_pmc = p4_disable_pmc, |
| .n_generic = ARRAY_SIZE(p4_generic_events), |
| .generic_events = p4_generic_events, |
| .cache_events = &power4_cache_events, |
| .flags = PPMU_NO_SIPR | PPMU_NO_CONT_SAMPLING, |
| }; |
| |
| static int __init init_power4_pmu(void) |
| { |
| if (!cur_cpu_spec->oprofile_cpu_type || |
| strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4")) |
| return -ENODEV; |
| |
| return register_power_pmu(&power4_pmu); |
| } |
| |
| early_initcall(init_power4_pmu); |