arch/mips/kernel/idle.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * MIPS idle loop and WAIT instruction support.
  *
  * Copyright (C) xxxx  the Anonymous
  * Copyright (C) 1994 - 2006 Ralf Baechle
  * Copyright (C) 2003, 2004  Maciej W. Rozycki
  * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/cpu.h>
 #include <linux/export.h>
 #include <linux/init.h>
 #include <linux/irqflags.h>
 #include <linux/printk.h>
 #include <linux/sched.h>
 #include <asm/cpu.h>
 #include <asm/cpu-info.h>
 #include <asm/cpu-type.h>
 #include <asm/idle.h>
 #include <asm/mipsregs.h>

 /*
  * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
  * the implementation of the "wait" feature differs between CPU families. This
  * points to the function that implements CPU specific wait.
  * The wait instruction stops the pipeline and reduces the power consumption of
  * the CPU very much.
  */
 void (*cpu_wait)(void);
 EXPORT_SYMBOL(cpu_wait);

 static void r3081_wait(void)
 {
 	unsigned long cfg = read_c0_conf();
 	write_c0_conf(cfg | R30XX_CONF_HALT);
 	local_irq_enable();
 }

 static void r39xx_wait(void)
 {
 	if (!need_resched())
 		write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
 	local_irq_enable();
 }

 void r4k_wait(void)
 {
 	local_irq_enable();
 	__r4k_wait();
 }

 /*
  * This variant is preferable as it allows testing need_resched and going to
  * sleep depending on the outcome atomically.  Unfortunately the "It is
  * implementation-dependent whether the pipeline restarts when a non-enabled
  * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
  * using this version a gamble.
  */
 void r4k_wait_irqoff(void)
 {
 	if (!need_resched())
 		__asm__(
 		"	.set	push		\n"
 		"	.set	arch=r4000	\n"
 		"	wait			\n"
 		"	.set	pop		\n");
 	local_irq_enable();
 }

 /*
  * The RM7000 variant has to handle erratum 38.	 The workaround is to not
  * have any pending stores when the WAIT instruction is executed.
  */
 static void rm7k_wait_irqoff(void)
 {
 	if (!need_resched())
 		__asm__(
 		"	.set	push					\n"
 		"	.set	arch=r4000				\n"
 		"	.set	noat					\n"
 		"	mfc0	$1, $12					\n"
 		"	sync						\n"
 		"	mtc0	$1, $12		# stalls until W stage	\n"
 		"	wait						\n"
 		"	mtc0	$1, $12		# stalls until W stage	\n"
 		"	.set	pop					\n");
 	local_irq_enable();
 }

 /*
  * Au1 'wait' is only useful when the 32kHz counter is used as timer,
  * since coreclock (and the cp0 counter) stops upon executing it. Only an
  * interrupt can wake it, so they must be enabled before entering idle modes.
  */
 static void au1k_wait(void)
 {
 	unsigned long c0status = read_c0_status() | 1;	/* irqs on */

 	__asm__(
 	"	.set	arch=r4000			\n"
 	"	cache	0x14, 0(%0)		\n"
 	"	cache	0x14, 32(%0)		\n"
 	"	sync				\n"
 	"	mtc0	%1, $12			\n" /* wr c0status */
 	"	wait				\n"
 	"	nop				\n"
 	"	nop				\n"
 	"	nop				\n"
 	"	nop				\n"
 	"	.set	mips0			\n"
 	: : "r" (au1k_wait), "r" (c0status));
 }

 static int __initdata nowait;

 static int __init wait_disable(char *s)
 {
 	nowait = 1;

 	return 1;
 }

 __setup("nowait", wait_disable);

 void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;

 	if (nowait) {
 		printk("Wait instruction disabled.\n");
 		return;
 	}

 	/*
 	 * MIPSr6 specifies that masked interrupts should unblock an executing
 	 * wait instruction, and thus that it is safe for us to use
 	 * r4k_wait_irqoff. Yippee!
 	 */
 	if (cpu_has_mips_r6) {
 		cpu_wait = r4k_wait_irqoff;
 		return;
 	}

 	switch (current_cpu_type()) {
 	case CPU_R3081:
 	case CPU_R3081E:
 		cpu_wait = r3081_wait;
 		break;
 	case CPU_TX3927:
 		cpu_wait = r39xx_wait;
 		break;
 	case CPU_R4200:
 /*	case CPU_R4300: */
 	case CPU_R4600:
 	case CPU_R4640:
 	case CPU_R4650:
 	case CPU_R4700:
 	case CPU_R5000:
 	case CPU_R5500:
 	case CPU_NEVADA:
 	case CPU_4KC:
 	case CPU_4KEC:
 	case CPU_4KSC:
 	case CPU_5KC:
 	case CPU_5KE:
 	case CPU_25KF:
 	case CPU_PR4450:
 	case CPU_BMIPS3300:
 	case CPU_BMIPS4350:
 	case CPU_BMIPS4380:
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
 	case CPU_CAVIUM_OCTEON3:
 	case CPU_JZRISC:
 	case CPU_LOONGSON1:
 	case CPU_XLR:
 	case CPU_XLP:
 		cpu_wait = r4k_wait;
 		break;
 	case CPU_LOONGSON3:
 		if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON3A_R2)
 			cpu_wait = r4k_wait;
 		break;

 	case CPU_BMIPS5000:
 		cpu_wait = r4k_wait_irqoff;
 		break;
 	case CPU_RM7000:
 		cpu_wait = rm7k_wait_irqoff;
 		break;

 	case CPU_PROAPTIV:
 	case CPU_P5600:
 		/*
 		 * Incoming Fast Debug Channel (FDC) data during a wait
 		 * instruction causes the wait never to resume, even if an
 		 * interrupt is received. Avoid using wait at all if FDC data is
 		 * likely to be received.
 		 */
 		if (IS_ENABLED(CONFIG_MIPS_EJTAG_FDC_TTY))
 			break;
 		/* fall through */
 	case CPU_M14KC:
 	case CPU_M14KEC:
 	case CPU_24K:
 	case CPU_34K:
 	case CPU_1004K:
 	case CPU_1074K:
 	case CPU_INTERAPTIV:
 	case CPU_M5150:
 	case CPU_QEMU_GENERIC:
 		cpu_wait = r4k_wait;
 		if (read_c0_config7() & MIPS_CONF7_WII)
 			cpu_wait = r4k_wait_irqoff;
 		break;

 	case CPU_74K:
 		cpu_wait = r4k_wait;
 		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
 			cpu_wait = r4k_wait_irqoff;
 		break;

 	case CPU_TX49XX:
 		cpu_wait = r4k_wait_irqoff;
 		break;
 	case CPU_ALCHEMY:
 		cpu_wait = au1k_wait;
 		break;
 	case CPU_20KC:
 		/*
 		 * WAIT on Rev1.0 has E1, E2, E3 and E16.
 		 * WAIT on Rev2.0 and Rev3.0 has E16.
 		 * Rev3.1 WAIT is nop, why bother
 		 */
 		if ((c->processor_id & 0xff) <= 0x64)
 			break;

 		/*
 		 * Another rev is incremeting c0_count at a reduced clock
 		 * rate while in WAIT mode.  So we basically have the choice
 		 * between using the cp0 timer as clocksource or avoiding
 		 * the WAIT instruction.  Until more details are known,
 		 * disable the use of WAIT for 20Kc entirely.
 		   cpu_wait = r4k_wait;
 		 */
 		break;
 	default:
 		break;
 	}
 }

 void arch_cpu_idle(void)
 {
 	if (cpu_wait)
 		cpu_wait();
 	else
 		local_irq_enable();
 }

 #ifdef CONFIG_CPU_IDLE

 int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
 			    struct cpuidle_driver *drv, int index)
 {
 	arch_cpu_idle();
 	return index;
 }

 #endif
	/*
	* MIPS idle loop and WAIT instruction support.
	*
	* Copyright (C) xxxx the Anonymous
	* Copyright (C) 1994 - 2006 Ralf Baechle
	* Copyright (C) 2003, 2004 Maciej W. Rozycki
	* Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*/
	#include <linux/cpu.h>
	#include <linux/export.h>
	#include <linux/init.h>
	#include <linux/irqflags.h>
	#include <linux/printk.h>
	#include <linux/sched.h>
	#include <asm/cpu.h>
	#include <asm/cpu-info.h>
	#include <asm/cpu-type.h>
	#include <asm/idle.h>
	#include <asm/mipsregs.h>

	/*
	* Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
	* the implementation of the "wait" feature differs between CPU families. This
	* points to the function that implements CPU specific wait.
	* The wait instruction stops the pipeline and reduces the power consumption of
	* the CPU very much.
	*/
	void (*cpu_wait)(void);
	EXPORT_SYMBOL(cpu_wait);

	static void r3081_wait(void)
	{
	unsigned long cfg = read_c0_conf();
	write_c0_conf(cfg \| R30XX_CONF_HALT);
	local_irq_enable();
	}

	static void r39xx_wait(void)
	{
	if (!need_resched())
	write_c0_conf(read_c0_conf() \| TX39_CONF_HALT);
	local_irq_enable();
	}

	void r4k_wait(void)
	{
	local_irq_enable();
	__r4k_wait();
	}

	/*
	* This variant is preferable as it allows testing need_resched and going to
	* sleep depending on the outcome atomically. Unfortunately the "It is
	* implementation-dependent whether the pipeline restarts when a non-enabled
	* interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
	* using this version a gamble.
	*/
	void r4k_wait_irqoff(void)
	{
	if (!need_resched())
	__asm__(
	" .set push \n"
	" .set arch=r4000 \n"
	" wait \n"
	" .set pop \n");
	local_irq_enable();
	}

	/*
	* The RM7000 variant has to handle erratum 38. The workaround is to not
	* have any pending stores when the WAIT instruction is executed.
	*/
	static void rm7k_wait_irqoff(void)
	{
	if (!need_resched())
	__asm__(
	" .set push \n"
	" .set arch=r4000 \n"
	" .set noat \n"
	" mfc0 $1, $12 \n"
	" sync \n"
	" mtc0 $1, $12 # stalls until W stage \n"
	" wait \n"
	" mtc0 $1, $12 # stalls until W stage \n"
	" .set pop \n");
	local_irq_enable();
	}

	/*
	* Au1 'wait' is only useful when the 32kHz counter is used as timer,
	* since coreclock (and the cp0 counter) stops upon executing it. Only an
	* interrupt can wake it, so they must be enabled before entering idle modes.
	*/
	static void au1k_wait(void)
	{
	unsigned long c0status = read_c0_status() \| 1; /* irqs on */

	__asm__(
	" .set arch=r4000 \n"
	" cache 0x14, 0(%0) \n"
	" cache 0x14, 32(%0) \n"
	" sync \n"
	" mtc0 %1, $12 \n" /* wr c0status */
	" wait \n"
	" nop \n"
	" nop \n"
	" nop \n"
	" nop \n"
	" .set mips0 \n"
	: : "r" (au1k_wait), "r" (c0status));
	}

	static int __initdata nowait;

	static int __init wait_disable(char *s)
	{
	nowait = 1;

	return 1;
	}

	__setup("nowait", wait_disable);

	void __init check_wait(void)
	{
	struct cpuinfo_mips *c = &current_cpu_data;

	if (nowait) {
	printk("Wait instruction disabled.\n");
	return;
	}

	/*
	* MIPSr6 specifies that masked interrupts should unblock an executing
	* wait instruction, and thus that it is safe for us to use
	* r4k_wait_irqoff. Yippee!
	*/
	if (cpu_has_mips_r6) {
	cpu_wait = r4k_wait_irqoff;
	return;
	}

	switch (current_cpu_type()) {
	case CPU_R3081:
	case CPU_R3081E:
	cpu_wait = r3081_wait;
	break;
	case CPU_TX3927:
	cpu_wait = r39xx_wait;
	break;
	case CPU_R4200:
	/* case CPU_R4300: */
	case CPU_R4600:
	case CPU_R4640:
	case CPU_R4650:
	case CPU_R4700:
	case CPU_R5000:
	case CPU_R5500:
	case CPU_NEVADA:
	case CPU_4KC:
	case CPU_4KEC:
	case CPU_4KSC:
	case CPU_5KC:
	case CPU_5KE:
	case CPU_25KF:
	case CPU_PR4450:
	case CPU_BMIPS3300:
	case CPU_BMIPS4350:
	case CPU_BMIPS4380:
	case CPU_CAVIUM_OCTEON:
	case CPU_CAVIUM_OCTEON_PLUS:
	case CPU_CAVIUM_OCTEON2:
	case CPU_CAVIUM_OCTEON3:
	case CPU_JZRISC:
	case CPU_LOONGSON1:
	case CPU_XLR:
	case CPU_XLP:
	cpu_wait = r4k_wait;
	break;
	case CPU_LOONGSON3:
	if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON3A_R2)
	cpu_wait = r4k_wait;
	break;

	case CPU_BMIPS5000:
	cpu_wait = r4k_wait_irqoff;
	break;
	case CPU_RM7000:
	cpu_wait = rm7k_wait_irqoff;
	break;

	case CPU_PROAPTIV:
	case CPU_P5600:
	/*
	* Incoming Fast Debug Channel (FDC) data during a wait
	* instruction causes the wait never to resume, even if an
	* interrupt is received. Avoid using wait at all if FDC data is
	* likely to be received.
	*/
	if (IS_ENABLED(CONFIG_MIPS_EJTAG_FDC_TTY))
	break;
	/* fall through */
	case CPU_M14KC:
	case CPU_M14KEC:
	case CPU_24K:
	case CPU_34K:
	case CPU_1004K:
	case CPU_1074K:
	case CPU_INTERAPTIV:
	case CPU_M5150:
	case CPU_QEMU_GENERIC:
	cpu_wait = r4k_wait;
	if (read_c0_config7() & MIPS_CONF7_WII)
	cpu_wait = r4k_wait_irqoff;
	break;

	case CPU_74K:
	cpu_wait = r4k_wait;
	if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
	cpu_wait = r4k_wait_irqoff;
	break;

	case CPU_TX49XX:
	cpu_wait = r4k_wait_irqoff;
	break;
	case CPU_ALCHEMY:
	cpu_wait = au1k_wait;
	break;
	case CPU_20KC:
	/*
	* WAIT on Rev1.0 has E1, E2, E3 and E16.
	* WAIT on Rev2.0 and Rev3.0 has E16.
	* Rev3.1 WAIT is nop, why bother
	*/
	if ((c->processor_id & 0xff) <= 0x64)
	break;

	/*
	* Another rev is incremeting c0_count at a reduced clock
	* rate while in WAIT mode. So we basically have the choice
	* between using the cp0 timer as clocksource or avoiding
	* the WAIT instruction. Until more details are known,
	* disable the use of WAIT for 20Kc entirely.
	cpu_wait = r4k_wait;
	*/
	break;
	default:
	break;
	}
	}

	void arch_cpu_idle(void)
	{
	if (cpu_wait)
	cpu_wait();
	else
	local_irq_enable();
	}

	#ifdef CONFIG_CPU_IDLE

	int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
	struct cpuidle_driver *drv, int index)
	{
	arch_cpu_idle();
	return index;
	}

	#endif