| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle |
| * Copyright (C) 1999, 2000 Silicon Graphics, Inc. |
| * Copyright (C) 2002, 2007 Maciej W. Rozycki |
| * Copyright (C) 2001, 2012 MIPS Technologies, Inc. All rights reserved. |
| */ |
| #include <linux/init.h> |
| |
| #include <asm/asm.h> |
| #include <asm/asmmacro.h> |
| #include <asm/cacheops.h> |
| #include <asm/irqflags.h> |
| #include <asm/regdef.h> |
| #include <asm/fpregdef.h> |
| #include <asm/mipsregs.h> |
| #include <asm/stackframe.h> |
| #include <asm/war.h> |
| #include <asm/thread_info.h> |
| |
| __INIT |
| |
| /* |
| * General exception vector for all other CPUs. |
| * |
| * Be careful when changing this, it has to be at most 128 bytes |
| * to fit into space reserved for the exception handler. |
| */ |
| NESTED(except_vec3_generic, 0, sp) |
| .set push |
| .set noat |
| #if R5432_CP0_INTERRUPT_WAR |
| mfc0 k0, CP0_INDEX |
| #endif |
| mfc0 k1, CP0_CAUSE |
| andi k1, k1, 0x7c |
| #ifdef CONFIG_64BIT |
| dsll k1, k1, 1 |
| #endif |
| PTR_L k0, exception_handlers(k1) |
| jr k0 |
| .set pop |
| END(except_vec3_generic) |
| |
| /* |
| * General exception handler for CPUs with virtual coherency exception. |
| * |
| * Be careful when changing this, it has to be at most 256 (as a special |
| * exception) bytes to fit into space reserved for the exception handler. |
| */ |
| NESTED(except_vec3_r4000, 0, sp) |
| .set push |
| .set arch=r4000 |
| .set noat |
| mfc0 k1, CP0_CAUSE |
| li k0, 31<<2 |
| andi k1, k1, 0x7c |
| .set push |
| .set noreorder |
| .set nomacro |
| beq k1, k0, handle_vced |
| li k0, 14<<2 |
| beq k1, k0, handle_vcei |
| #ifdef CONFIG_64BIT |
| dsll k1, k1, 1 |
| #endif |
| .set pop |
| PTR_L k0, exception_handlers(k1) |
| jr k0 |
| |
| /* |
| * Big shit, we now may have two dirty primary cache lines for the same |
| * physical address. We can safely invalidate the line pointed to by |
| * c0_badvaddr because after return from this exception handler the |
| * load / store will be re-executed. |
| */ |
| handle_vced: |
| MFC0 k0, CP0_BADVADDR |
| li k1, -4 # Is this ... |
| and k0, k1 # ... really needed? |
| mtc0 zero, CP0_TAGLO |
| cache Index_Store_Tag_D, (k0) |
| cache Hit_Writeback_Inv_SD, (k0) |
| #ifdef CONFIG_PROC_FS |
| PTR_LA k0, vced_count |
| lw k1, (k0) |
| addiu k1, 1 |
| sw k1, (k0) |
| #endif |
| eret |
| |
| handle_vcei: |
| MFC0 k0, CP0_BADVADDR |
| cache Hit_Writeback_Inv_SD, (k0) # also cleans pi |
| #ifdef CONFIG_PROC_FS |
| PTR_LA k0, vcei_count |
| lw k1, (k0) |
| addiu k1, 1 |
| sw k1, (k0) |
| #endif |
| eret |
| .set pop |
| END(except_vec3_r4000) |
| |
| __FINIT |
| |
| .align 5 /* 32 byte rollback region */ |
| LEAF(__r4k_wait) |
| .set push |
| .set noreorder |
| /* start of rollback region */ |
| LONG_L t0, TI_FLAGS($28) |
| nop |
| andi t0, _TIF_NEED_RESCHED |
| bnez t0, 1f |
| nop |
| nop |
| nop |
| #ifdef CONFIG_CPU_MICROMIPS |
| nop |
| nop |
| nop |
| nop |
| #endif |
| .set MIPS_ISA_ARCH_LEVEL_RAW |
| wait |
| /* end of rollback region (the region size must be power of two) */ |
| 1: |
| jr ra |
| nop |
| .set pop |
| END(__r4k_wait) |
| |
| .macro BUILD_ROLLBACK_PROLOGUE handler |
| FEXPORT(rollback_\handler) |
| .set push |
| .set noat |
| MFC0 k0, CP0_EPC |
| PTR_LA k1, __r4k_wait |
| ori k0, 0x1f /* 32 byte rollback region */ |
| xori k0, 0x1f |
| bne k0, k1, \handler |
| MTC0 k0, CP0_EPC |
| .set pop |
| .endm |
| |
| .align 5 |
| BUILD_ROLLBACK_PROLOGUE handle_int |
| NESTED(handle_int, PT_SIZE, sp) |
| .cfi_signal_frame |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| /* |
| * Check to see if the interrupted code has just disabled |
| * interrupts and ignore this interrupt for now if so. |
| * |
| * local_irq_disable() disables interrupts and then calls |
| * trace_hardirqs_off() to track the state. If an interrupt is taken |
| * after interrupts are disabled but before the state is updated |
| * it will appear to restore_all that it is incorrectly returning with |
| * interrupts disabled |
| */ |
| .set push |
| .set noat |
| mfc0 k0, CP0_STATUS |
| #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) |
| and k0, ST0_IEP |
| bnez k0, 1f |
| |
| mfc0 k0, CP0_EPC |
| .set noreorder |
| j k0 |
| rfe |
| #else |
| and k0, ST0_IE |
| bnez k0, 1f |
| |
| eret |
| #endif |
| 1: |
| .set pop |
| #endif |
| SAVE_ALL docfi=1 |
| CLI |
| TRACE_IRQS_OFF |
| |
| LONG_L s0, TI_REGS($28) |
| LONG_S sp, TI_REGS($28) |
| |
| /* |
| * SAVE_ALL ensures we are using a valid kernel stack for the thread. |
| * Check if we are already using the IRQ stack. |
| */ |
| move s1, sp # Preserve the sp |
| |
| /* Get IRQ stack for this CPU */ |
| ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG |
| #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) |
| lui k1, %hi(irq_stack) |
| #else |
| lui k1, %highest(irq_stack) |
| daddiu k1, %higher(irq_stack) |
| dsll k1, 16 |
| daddiu k1, %hi(irq_stack) |
| dsll k1, 16 |
| #endif |
| LONG_SRL k0, SMP_CPUID_PTRSHIFT |
| LONG_ADDU k1, k0 |
| LONG_L t0, %lo(irq_stack)(k1) |
| |
| # Check if already on IRQ stack |
| PTR_LI t1, ~(_THREAD_SIZE-1) |
| and t1, t1, sp |
| beq t0, t1, 2f |
| |
| /* Switch to IRQ stack */ |
| li t1, _IRQ_STACK_START |
| PTR_ADD sp, t0, t1 |
| |
| /* Save task's sp on IRQ stack so that unwinding can follow it */ |
| LONG_S s1, 0(sp) |
| 2: |
| jal plat_irq_dispatch |
| |
| /* Restore sp */ |
| move sp, s1 |
| |
| j ret_from_irq |
| #ifdef CONFIG_CPU_MICROMIPS |
| nop |
| #endif |
| END(handle_int) |
| |
| __INIT |
| |
| /* |
| * Special interrupt vector for MIPS64 ISA & embedded MIPS processors. |
| * This is a dedicated interrupt exception vector which reduces the |
| * interrupt processing overhead. The jump instruction will be replaced |
| * at the initialization time. |
| * |
| * Be careful when changing this, it has to be at most 128 bytes |
| * to fit into space reserved for the exception handler. |
| */ |
| NESTED(except_vec4, 0, sp) |
| 1: j 1b /* Dummy, will be replaced */ |
| END(except_vec4) |
| |
| /* |
| * EJTAG debug exception handler. |
| * The EJTAG debug exception entry point is 0xbfc00480, which |
| * normally is in the boot PROM, so the boot PROM must do an |
| * unconditional jump to this vector. |
| */ |
| NESTED(except_vec_ejtag_debug, 0, sp) |
| j ejtag_debug_handler |
| #ifdef CONFIG_CPU_MICROMIPS |
| nop |
| #endif |
| END(except_vec_ejtag_debug) |
| |
| __FINIT |
| |
| /* |
| * Vectored interrupt handler. |
| * This prototype is copied to ebase + n*IntCtl.VS and patched |
| * to invoke the handler |
| */ |
| BUILD_ROLLBACK_PROLOGUE except_vec_vi |
| NESTED(except_vec_vi, 0, sp) |
| SAVE_SOME docfi=1 |
| SAVE_AT docfi=1 |
| .set push |
| .set noreorder |
| PTR_LA v1, except_vec_vi_handler |
| FEXPORT(except_vec_vi_lui) |
| lui v0, 0 /* Patched */ |
| jr v1 |
| FEXPORT(except_vec_vi_ori) |
| ori v0, 0 /* Patched */ |
| .set pop |
| END(except_vec_vi) |
| EXPORT(except_vec_vi_end) |
| |
| /* |
| * Common Vectored Interrupt code |
| * Complete the register saves and invoke the handler which is passed in $v0 |
| */ |
| NESTED(except_vec_vi_handler, 0, sp) |
| SAVE_TEMP |
| SAVE_STATIC |
| CLI |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| move s0, v0 |
| TRACE_IRQS_OFF |
| move v0, s0 |
| #endif |
| |
| LONG_L s0, TI_REGS($28) |
| LONG_S sp, TI_REGS($28) |
| |
| /* |
| * SAVE_ALL ensures we are using a valid kernel stack for the thread. |
| * Check if we are already using the IRQ stack. |
| */ |
| move s1, sp # Preserve the sp |
| |
| /* Get IRQ stack for this CPU */ |
| ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG |
| #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) |
| lui k1, %hi(irq_stack) |
| #else |
| lui k1, %highest(irq_stack) |
| daddiu k1, %higher(irq_stack) |
| dsll k1, 16 |
| daddiu k1, %hi(irq_stack) |
| dsll k1, 16 |
| #endif |
| LONG_SRL k0, SMP_CPUID_PTRSHIFT |
| LONG_ADDU k1, k0 |
| LONG_L t0, %lo(irq_stack)(k1) |
| |
| # Check if already on IRQ stack |
| PTR_LI t1, ~(_THREAD_SIZE-1) |
| and t1, t1, sp |
| beq t0, t1, 2f |
| |
| /* Switch to IRQ stack */ |
| li t1, _IRQ_STACK_START |
| PTR_ADD sp, t0, t1 |
| |
| /* Save task's sp on IRQ stack so that unwinding can follow it */ |
| LONG_S s1, 0(sp) |
| 2: |
| jalr v0 |
| |
| /* Restore sp */ |
| move sp, s1 |
| |
| j ret_from_irq |
| END(except_vec_vi_handler) |
| |
| /* |
| * EJTAG debug exception handler. |
| */ |
| NESTED(ejtag_debug_handler, PT_SIZE, sp) |
| .set push |
| .set noat |
| MTC0 k0, CP0_DESAVE |
| mfc0 k0, CP0_DEBUG |
| |
| sll k0, k0, 30 # Check for SDBBP. |
| bgez k0, ejtag_return |
| |
| PTR_LA k0, ejtag_debug_buffer |
| LONG_S k1, 0(k0) |
| SAVE_ALL |
| move a0, sp |
| jal ejtag_exception_handler |
| RESTORE_ALL |
| PTR_LA k0, ejtag_debug_buffer |
| LONG_L k1, 0(k0) |
| |
| ejtag_return: |
| MFC0 k0, CP0_DESAVE |
| .set mips32 |
| deret |
| .set pop |
| END(ejtag_debug_handler) |
| |
| /* |
| * This buffer is reserved for the use of the EJTAG debug |
| * handler. |
| */ |
| .data |
| EXPORT(ejtag_debug_buffer) |
| .fill LONGSIZE |
| .previous |
| |
| __INIT |
| |
| /* |
| * NMI debug exception handler for MIPS reference boards. |
| * The NMI debug exception entry point is 0xbfc00000, which |
| * normally is in the boot PROM, so the boot PROM must do a |
| * unconditional jump to this vector. |
| */ |
| NESTED(except_vec_nmi, 0, sp) |
| j nmi_handler |
| #ifdef CONFIG_CPU_MICROMIPS |
| nop |
| #endif |
| END(except_vec_nmi) |
| |
| __FINIT |
| |
| NESTED(nmi_handler, PT_SIZE, sp) |
| .cfi_signal_frame |
| .set push |
| .set noat |
| /* |
| * Clear ERL - restore segment mapping |
| * Clear BEV - required for page fault exception handler to work |
| */ |
| mfc0 k0, CP0_STATUS |
| ori k0, k0, ST0_EXL |
| li k1, ~(ST0_BEV | ST0_ERL) |
| and k0, k0, k1 |
| mtc0 k0, CP0_STATUS |
| _ehb |
| SAVE_ALL |
| move a0, sp |
| jal nmi_exception_handler |
| /* nmi_exception_handler never returns */ |
| .set pop |
| END(nmi_handler) |
| |
| .macro __build_clear_none |
| .endm |
| |
| .macro __build_clear_sti |
| TRACE_IRQS_ON |
| STI |
| .endm |
| |
| .macro __build_clear_cli |
| CLI |
| TRACE_IRQS_OFF |
| .endm |
| |
| .macro __build_clear_fpe |
| CLI |
| TRACE_IRQS_OFF |
| .set push |
| /* gas fails to assemble cfc1 for some archs (octeon).*/ \ |
| .set mips1 |
| SET_HARDFLOAT |
| cfc1 a1, fcr31 |
| .set pop |
| .endm |
| |
| .macro __build_clear_msa_fpe |
| CLI |
| TRACE_IRQS_OFF |
| _cfcmsa a1, MSA_CSR |
| .endm |
| |
| .macro __build_clear_ade |
| MFC0 t0, CP0_BADVADDR |
| PTR_S t0, PT_BVADDR(sp) |
| KMODE |
| .endm |
| |
| .macro __BUILD_silent exception |
| .endm |
| |
| /* Gas tries to parse the PRINT argument as a string containing |
| string escapes and emits bogus warnings if it believes to |
| recognize an unknown escape code. So make the arguments |
| start with an n and gas will believe \n is ok ... */ |
| .macro __BUILD_verbose nexception |
| LONG_L a1, PT_EPC(sp) |
| #ifdef CONFIG_32BIT |
| PRINT("Got \nexception at %08lx\012") |
| #endif |
| #ifdef CONFIG_64BIT |
| PRINT("Got \nexception at %016lx\012") |
| #endif |
| .endm |
| |
| .macro __BUILD_count exception |
| LONG_L t0,exception_count_\exception |
| LONG_ADDIU t0, 1 |
| LONG_S t0,exception_count_\exception |
| .comm exception_count\exception, 8, 8 |
| .endm |
| |
| .macro __BUILD_HANDLER exception handler clear verbose ext |
| .align 5 |
| NESTED(handle_\exception, PT_SIZE, sp) |
| .cfi_signal_frame |
| .set noat |
| SAVE_ALL |
| FEXPORT(handle_\exception\ext) |
| __build_clear_\clear |
| .set at |
| __BUILD_\verbose \exception |
| move a0, sp |
| jal do_\handler |
| j ret_from_exception |
| END(handle_\exception) |
| .endm |
| |
| .macro BUILD_HANDLER exception handler clear verbose |
| __BUILD_HANDLER \exception \handler \clear \verbose _int |
| .endm |
| |
| BUILD_HANDLER adel ade ade silent /* #4 */ |
| BUILD_HANDLER ades ade ade silent /* #5 */ |
| BUILD_HANDLER ibe be cli silent /* #6 */ |
| BUILD_HANDLER dbe be cli silent /* #7 */ |
| BUILD_HANDLER bp bp sti silent /* #9 */ |
| BUILD_HANDLER ri ri sti silent /* #10 */ |
| BUILD_HANDLER cpu cpu sti silent /* #11 */ |
| BUILD_HANDLER ov ov sti silent /* #12 */ |
| BUILD_HANDLER tr tr sti silent /* #13 */ |
| BUILD_HANDLER msa_fpe msa_fpe msa_fpe silent /* #14 */ |
| BUILD_HANDLER fpe fpe fpe silent /* #15 */ |
| BUILD_HANDLER ftlb ftlb none silent /* #16 */ |
| BUILD_HANDLER msa msa sti silent /* #21 */ |
| BUILD_HANDLER mdmx mdmx sti silent /* #22 */ |
| #ifdef CONFIG_HARDWARE_WATCHPOINTS |
| /* |
| * For watch, interrupts will be enabled after the watch |
| * registers are read. |
| */ |
| BUILD_HANDLER watch watch cli silent /* #23 */ |
| #else |
| BUILD_HANDLER watch watch sti verbose /* #23 */ |
| #endif |
| BUILD_HANDLER mcheck mcheck cli verbose /* #24 */ |
| BUILD_HANDLER mt mt sti silent /* #25 */ |
| BUILD_HANDLER dsp dsp sti silent /* #26 */ |
| BUILD_HANDLER reserved reserved sti verbose /* others */ |
| |
| .align 5 |
| LEAF(handle_ri_rdhwr_tlbp) |
| .set push |
| .set noat |
| .set noreorder |
| /* check if TLB contains a entry for EPC */ |
| MFC0 k1, CP0_ENTRYHI |
| andi k1, MIPS_ENTRYHI_ASID | MIPS_ENTRYHI_ASIDX |
| MFC0 k0, CP0_EPC |
| PTR_SRL k0, _PAGE_SHIFT + 1 |
| PTR_SLL k0, _PAGE_SHIFT + 1 |
| or k1, k0 |
| MTC0 k1, CP0_ENTRYHI |
| mtc0_tlbw_hazard |
| tlbp |
| tlb_probe_hazard |
| mfc0 k1, CP0_INDEX |
| .set pop |
| bltz k1, handle_ri /* slow path */ |
| /* fall thru */ |
| END(handle_ri_rdhwr_tlbp) |
| |
| LEAF(handle_ri_rdhwr) |
| .set push |
| .set noat |
| .set noreorder |
| /* MIPS32: 0x7c03e83b: rdhwr v1,$29 */ |
| /* microMIPS: 0x007d6b3c: rdhwr v1,$29 */ |
| MFC0 k1, CP0_EPC |
| #if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS64_R2) |
| and k0, k1, 1 |
| beqz k0, 1f |
| xor k1, k0 |
| lhu k0, (k1) |
| lhu k1, 2(k1) |
| ins k1, k0, 16, 16 |
| lui k0, 0x007d |
| b docheck |
| ori k0, 0x6b3c |
| 1: |
| lui k0, 0x7c03 |
| lw k1, (k1) |
| ori k0, 0xe83b |
| #else |
| andi k0, k1, 1 |
| bnez k0, handle_ri |
| lui k0, 0x7c03 |
| lw k1, (k1) |
| ori k0, 0xe83b |
| #endif |
| .set reorder |
| docheck: |
| bne k0, k1, handle_ri /* if not ours */ |
| |
| isrdhwr: |
| /* The insn is rdhwr. No need to check CAUSE.BD here. */ |
| get_saved_sp /* k1 := current_thread_info */ |
| .set noreorder |
| MFC0 k0, CP0_EPC |
| #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) |
| ori k1, _THREAD_MASK |
| xori k1, _THREAD_MASK |
| LONG_L v1, TI_TP_VALUE(k1) |
| LONG_ADDIU k0, 4 |
| jr k0 |
| rfe |
| #else |
| #ifndef CONFIG_CPU_DADDI_WORKAROUNDS |
| LONG_ADDIU k0, 4 /* stall on $k0 */ |
| #else |
| .set at=v1 |
| LONG_ADDIU k0, 4 |
| .set noat |
| #endif |
| MTC0 k0, CP0_EPC |
| /* I hope three instructions between MTC0 and ERET are enough... */ |
| ori k1, _THREAD_MASK |
| xori k1, _THREAD_MASK |
| LONG_L v1, TI_TP_VALUE(k1) |
| .set arch=r4000 |
| eret |
| .set mips0 |
| #endif |
| .set pop |
| END(handle_ri_rdhwr) |
| |
| #ifdef CONFIG_64BIT |
| /* A temporary overflow handler used by check_daddi(). */ |
| |
| __INIT |
| |
| BUILD_HANDLER daddi_ov daddi_ov none silent /* #12 */ |
| #endif |