| /* |
| * Legacy platform_data quirks |
| * |
| * Copyright (C) 2013 Texas Instruments |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/clk.h> |
| #include <linux/davinci_emac.h> |
| #include <linux/gpio.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/of_platform.h> |
| #include <linux/ti_wilink_st.h> |
| #include <linux/wl12xx.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/host.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/fixed.h> |
| |
| #include <linux/platform_data/pinctrl-single.h> |
| #include <linux/platform_data/hsmmc-omap.h> |
| #include <linux/platform_data/iommu-omap.h> |
| #include <linux/platform_data/wkup_m3.h> |
| #include <linux/platform_data/pwm_omap_dmtimer.h> |
| #include <linux/platform_data/media/ir-rx51.h> |
| #include <linux/platform_data/asoc-ti-mcbsp.h> |
| #include <plat/dmtimer.h> |
| |
| #include "common.h" |
| #include "common-board-devices.h" |
| #include "control.h" |
| #include "omap_device.h" |
| #include "omap-pm.h" |
| #include "omap-secure.h" |
| #include "soc.h" |
| #include "hsmmc.h" |
| |
| static struct omap_hsmmc_platform_data __maybe_unused mmc_pdata[2]; |
| |
| struct pdata_init { |
| const char *compatible; |
| void (*fn)(void); |
| }; |
| |
| static struct of_dev_auxdata omap_auxdata_lookup[]; |
| static struct twl4030_gpio_platform_data twl_gpio_auxdata; |
| |
| #ifdef CONFIG_MACH_NOKIA_N8X0 |
| static void __init omap2420_n8x0_legacy_init(void) |
| { |
| omap_auxdata_lookup[0].platform_data = n8x0_legacy_init(); |
| } |
| #else |
| #define omap2420_n8x0_legacy_init NULL |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP3 |
| /* |
| * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V |
| * mode for MMC1 in case bootloader did not configure things. |
| * Note that if the pins are used for MMC1, pbias-regulator |
| * manages the IO voltage. |
| */ |
| static void __init omap3_gpio126_127_129(void) |
| { |
| u32 reg; |
| |
| reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE); |
| reg &= ~OMAP343X_PBIASLITEVMODE1; |
| reg |= OMAP343X_PBIASLITEPWRDNZ1; |
| omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE); |
| if (cpu_is_omap3630()) { |
| reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL); |
| reg |= OMAP36XX_GPIO_IO_PWRDNZ; |
| omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL); |
| } |
| } |
| |
| static void __init hsmmc2_internal_input_clk(void) |
| { |
| u32 reg; |
| |
| reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1); |
| reg |= OMAP2_MMCSDIO2ADPCLKISEL; |
| omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1); |
| } |
| |
| static struct iommu_platform_data omap3_iommu_pdata = { |
| .reset_name = "mmu", |
| .assert_reset = omap_device_assert_hardreset, |
| .deassert_reset = omap_device_deassert_hardreset, |
| }; |
| |
| static int omap3_sbc_t3730_twl_callback(struct device *dev, |
| unsigned gpio, |
| unsigned ngpio) |
| { |
| int res; |
| |
| res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, |
| "wlan pwr"); |
| if (res) |
| return res; |
| |
| gpio_export(gpio, 0); |
| |
| return 0; |
| } |
| |
| static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name) |
| { |
| int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name); |
| |
| if (err) { |
| pr_err("SBC-T3x: %s reset gpio request failed: %d\n", |
| hub_name, err); |
| return; |
| } |
| |
| gpio_export(gpio, 0); |
| |
| udelay(10); |
| gpio_set_value(gpio, 1); |
| msleep(1); |
| } |
| |
| static void __init omap3_sbc_t3730_twl_init(void) |
| { |
| twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback; |
| } |
| |
| static void __init omap3_sbc_t3730_legacy_init(void) |
| { |
| omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); |
| } |
| |
| static void __init omap3_sbc_t3530_legacy_init(void) |
| { |
| omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); |
| } |
| |
| static struct ti_st_plat_data wilink_pdata = { |
| .nshutdown_gpio = 137, |
| .dev_name = "/dev/ttyO1", |
| .flow_cntrl = 1, |
| .baud_rate = 300000, |
| }; |
| |
| static struct platform_device wl18xx_device = { |
| .name = "kim", |
| .id = -1, |
| .dev = { |
| .platform_data = &wilink_pdata, |
| } |
| }; |
| |
| static struct ti_st_plat_data wilink7_pdata = { |
| .nshutdown_gpio = 162, |
| .dev_name = "/dev/ttyO1", |
| .flow_cntrl = 1, |
| .baud_rate = 3000000, |
| }; |
| |
| static struct platform_device wl128x_device = { |
| .name = "kim", |
| .id = -1, |
| .dev = { |
| .platform_data = &wilink7_pdata, |
| } |
| }; |
| |
| static struct platform_device btwilink_device = { |
| .name = "btwilink", |
| .id = -1, |
| }; |
| |
| static void __init omap3_igep0020_rev_f_legacy_init(void) |
| { |
| platform_device_register(&wl18xx_device); |
| platform_device_register(&btwilink_device); |
| } |
| |
| static void __init omap3_igep0030_rev_g_legacy_init(void) |
| { |
| platform_device_register(&wl18xx_device); |
| platform_device_register(&btwilink_device); |
| } |
| |
| static void __init omap3_evm_legacy_init(void) |
| { |
| hsmmc2_internal_input_clk(); |
| } |
| |
| static void am35xx_enable_emac_int(void) |
| { |
| u32 v; |
| |
| v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); |
| v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR | |
| AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR); |
| omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); |
| omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ |
| } |
| |
| static void am35xx_disable_emac_int(void) |
| { |
| u32 v; |
| |
| v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); |
| v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR); |
| omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); |
| omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ |
| } |
| |
| static struct emac_platform_data am35xx_emac_pdata = { |
| .interrupt_enable = am35xx_enable_emac_int, |
| .interrupt_disable = am35xx_disable_emac_int, |
| }; |
| |
| static void __init am35xx_emac_reset(void) |
| { |
| u32 v; |
| |
| v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); |
| v &= ~AM35XX_CPGMACSS_SW_RST; |
| omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET); |
| omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ |
| } |
| |
| static struct gpio cm_t3517_wlan_gpios[] __initdata = { |
| { 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" }, |
| { 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" }, |
| }; |
| |
| static void __init omap3_sbc_t3517_wifi_init(void) |
| { |
| int err = gpio_request_array(cm_t3517_wlan_gpios, |
| ARRAY_SIZE(cm_t3517_wlan_gpios)); |
| if (err) { |
| pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err); |
| return; |
| } |
| |
| gpio_export(cm_t3517_wlan_gpios[0].gpio, 0); |
| gpio_export(cm_t3517_wlan_gpios[1].gpio, 0); |
| |
| msleep(100); |
| gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0); |
| } |
| |
| static void __init omap3_sbc_t3517_legacy_init(void) |
| { |
| omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub"); |
| omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub"); |
| am35xx_emac_reset(); |
| hsmmc2_internal_input_clk(); |
| omap3_sbc_t3517_wifi_init(); |
| } |
| |
| static void __init am3517_evm_legacy_init(void) |
| { |
| am35xx_emac_reset(); |
| } |
| |
| static struct platform_device omap3_rom_rng_device = { |
| .name = "omap3-rom-rng", |
| .id = -1, |
| .dev = { |
| .platform_data = rx51_secure_rng_call, |
| }, |
| }; |
| |
| static void __init nokia_n900_legacy_init(void) |
| { |
| hsmmc2_internal_input_clk(); |
| mmc_pdata[0].name = "external"; |
| mmc_pdata[1].name = "internal"; |
| |
| if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { |
| if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) { |
| pr_info("RX-51: Enabling ARM errata 430973 workaround\n"); |
| /* set IBE to 1 */ |
| rx51_secure_update_aux_cr(BIT(6), 0); |
| } else { |
| pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n"); |
| pr_warn("Thumb binaries may crash randomly without this workaround\n"); |
| } |
| |
| pr_info("RX-51: Registering OMAP3 HWRNG device\n"); |
| platform_device_register(&omap3_rom_rng_device); |
| } |
| } |
| |
| static void __init omap3_tao3530_legacy_init(void) |
| { |
| hsmmc2_internal_input_clk(); |
| } |
| |
| static void __init omap3_logicpd_torpedo_init(void) |
| { |
| omap3_gpio126_127_129(); |
| platform_device_register(&wl128x_device); |
| platform_device_register(&btwilink_device); |
| } |
| |
| /* omap3pandora legacy devices */ |
| |
| static struct platform_device pandora_backlight = { |
| .name = "pandora-backlight", |
| .id = -1, |
| }; |
| |
| static void __init omap3_pandora_legacy_init(void) |
| { |
| platform_device_register(&pandora_backlight); |
| } |
| #endif /* CONFIG_ARCH_OMAP3 */ |
| |
| #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) |
| static struct iommu_platform_data omap4_iommu_pdata = { |
| .reset_name = "mmu_cache", |
| .assert_reset = omap_device_assert_hardreset, |
| .deassert_reset = omap_device_deassert_hardreset, |
| }; |
| #endif |
| |
| #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) |
| static struct wkup_m3_platform_data wkup_m3_data = { |
| .reset_name = "wkup_m3", |
| .assert_reset = omap_device_assert_hardreset, |
| .deassert_reset = omap_device_deassert_hardreset, |
| }; |
| #endif |
| |
| #ifdef CONFIG_SOC_OMAP5 |
| static void __init omap5_uevm_legacy_init(void) |
| { |
| } |
| #endif |
| |
| #ifdef CONFIG_SOC_DRA7XX |
| static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc1; |
| static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc2; |
| static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc3; |
| |
| static void __init dra7x_evm_mmc_quirk(void) |
| { |
| if (omap_rev() == DRA752_REV_ES1_1 || omap_rev() == DRA752_REV_ES1_0) { |
| dra7_hsmmc_data_mmc1.version = "rev11"; |
| dra7_hsmmc_data_mmc1.max_freq = 96000000; |
| |
| dra7_hsmmc_data_mmc2.version = "rev11"; |
| dra7_hsmmc_data_mmc2.max_freq = 48000000; |
| |
| dra7_hsmmc_data_mmc3.version = "rev11"; |
| dra7_hsmmc_data_mmc3.max_freq = 48000000; |
| } |
| } |
| #endif |
| |
| static struct pcs_pdata pcs_pdata; |
| |
| void omap_pcs_legacy_init(int irq, void (*rearm)(void)) |
| { |
| pcs_pdata.irq = irq; |
| pcs_pdata.rearm = rearm; |
| } |
| |
| /* |
| * GPIOs for TWL are initialized by the I2C bus and need custom |
| * handing until DSS has device tree bindings. |
| */ |
| void omap_auxdata_legacy_init(struct device *dev) |
| { |
| if (dev->platform_data) |
| return; |
| |
| if (strcmp("twl4030-gpio", dev_name(dev))) |
| return; |
| |
| dev->platform_data = &twl_gpio_auxdata; |
| } |
| |
| /* Dual mode timer PWM callbacks platdata */ |
| #if IS_ENABLED(CONFIG_OMAP_DM_TIMER) |
| static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { |
| .request_by_node = omap_dm_timer_request_by_node, |
| .request_specific = omap_dm_timer_request_specific, |
| .request = omap_dm_timer_request, |
| .set_source = omap_dm_timer_set_source, |
| .get_irq = omap_dm_timer_get_irq, |
| .set_int_enable = omap_dm_timer_set_int_enable, |
| .set_int_disable = omap_dm_timer_set_int_disable, |
| .free = omap_dm_timer_free, |
| .enable = omap_dm_timer_enable, |
| .disable = omap_dm_timer_disable, |
| .get_fclk = omap_dm_timer_get_fclk, |
| .start = omap_dm_timer_start, |
| .stop = omap_dm_timer_stop, |
| .set_load = omap_dm_timer_set_load, |
| .set_match = omap_dm_timer_set_match, |
| .set_pwm = omap_dm_timer_set_pwm, |
| .set_prescaler = omap_dm_timer_set_prescaler, |
| .read_counter = omap_dm_timer_read_counter, |
| .write_counter = omap_dm_timer_write_counter, |
| .read_status = omap_dm_timer_read_status, |
| .write_status = omap_dm_timer_write_status, |
| }; |
| #endif |
| |
| static struct ir_rx51_platform_data __maybe_unused rx51_ir_data = { |
| .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, |
| }; |
| |
| static struct platform_device __maybe_unused rx51_ir_device = { |
| .name = "ir_rx51", |
| .id = -1, |
| .dev = { |
| .platform_data = &rx51_ir_data, |
| }, |
| }; |
| |
| #if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP) |
| static struct omap_mcbsp_platform_data mcbsp_pdata; |
| static void __init omap3_mcbsp_init(void) |
| { |
| omap3_mcbsp_init_pdata_callback(&mcbsp_pdata); |
| } |
| #else |
| static void __init omap3_mcbsp_init(void) {} |
| #endif |
| |
| /* |
| * Few boards still need auxdata populated before we populate |
| * the dev entries in of_platform_populate(). |
| */ |
| static struct pdata_init auxdata_quirks[] __initdata = { |
| #ifdef CONFIG_SOC_OMAP2420 |
| { "nokia,n800", omap2420_n8x0_legacy_init, }, |
| { "nokia,n810", omap2420_n8x0_legacy_init, }, |
| { "nokia,n810-wimax", omap2420_n8x0_legacy_init, }, |
| #endif |
| #ifdef CONFIG_ARCH_OMAP3 |
| { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, }, |
| #endif |
| { /* sentinel */ }, |
| }; |
| |
| static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { |
| #ifdef CONFIG_MACH_NOKIA_N8X0 |
| OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL), |
| OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data), |
| OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data), |
| #endif |
| #ifdef CONFIG_ARCH_OMAP3 |
| OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu", |
| &omap3_iommu_pdata), |
| OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]), |
| OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]), |
| OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data), |
| /* Only on am3517 */ |
| OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL), |
| OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", |
| &am35xx_emac_pdata), |
| /* McBSP modules with sidetone core */ |
| #if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP) |
| OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata), |
| OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata), |
| #endif |
| #endif |
| #ifdef CONFIG_SOC_AM33XX |
| OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3", |
| &wkup_m3_data), |
| #endif |
| #ifdef CONFIG_SOC_AM43XX |
| OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", |
| &wkup_m3_data), |
| #endif |
| #if IS_ENABLED(CONFIG_OMAP_DM_TIMER) |
| OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata), |
| #endif |
| #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) |
| OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", |
| &omap4_iommu_pdata), |
| OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu", |
| &omap4_iommu_pdata), |
| #endif |
| #ifdef CONFIG_SOC_DRA7XX |
| OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x4809c000, "4809c000.mmc", |
| &dra7_hsmmc_data_mmc1), |
| OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480b4000, "480b4000.mmc", |
| &dra7_hsmmc_data_mmc2), |
| OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480ad000, "480ad000.mmc", |
| &dra7_hsmmc_data_mmc3), |
| #endif |
| /* Common auxdata */ |
| OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata), |
| { /* sentinel */ }, |
| }; |
| |
| /* |
| * Few boards still need to initialize some legacy devices with |
| * platform data until the drivers support device tree. |
| */ |
| static struct pdata_init pdata_quirks[] __initdata = { |
| #ifdef CONFIG_ARCH_OMAP3 |
| { "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, }, |
| { "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, }, |
| { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, }, |
| { "nokia,omap3-n900", nokia_n900_legacy_init, }, |
| { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, |
| { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, |
| { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, |
| { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, |
| { "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, }, |
| { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, |
| { "ti,am3517-evm", am3517_evm_legacy_init, }, |
| { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, |
| { "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, }, |
| { "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, }, |
| #endif |
| #ifdef CONFIG_SOC_OMAP5 |
| { "ti,omap5-uevm", omap5_uevm_legacy_init, }, |
| #endif |
| #ifdef CONFIG_SOC_DRA7XX |
| { "ti,dra7-evm", dra7x_evm_mmc_quirk, }, |
| #endif |
| { /* sentinel */ }, |
| }; |
| |
| static void pdata_quirks_check(struct pdata_init *quirks) |
| { |
| while (quirks->compatible) { |
| if (of_machine_is_compatible(quirks->compatible)) { |
| if (quirks->fn) |
| quirks->fn(); |
| } |
| quirks++; |
| } |
| } |
| |
| void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) |
| { |
| /* |
| * We still need this for omap2420 and omap3 PM to work, others are |
| * using drivers/misc/sram.c already. |
| */ |
| if (of_machine_is_compatible("ti,omap2420") || |
| of_machine_is_compatible("ti,omap3")) |
| omap_sdrc_init(NULL, NULL); |
| |
| if (of_machine_is_compatible("ti,omap3")) |
| omap3_mcbsp_init(); |
| pdata_quirks_check(auxdata_quirks); |
| of_platform_populate(NULL, omap_dt_match_table, |
| omap_auxdata_lookup, NULL); |
| pdata_quirks_check(pdata_quirks); |
| } |