| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * arch/arm/mach-ixp4xx/avila-setup.c |
| * |
| * Gateworks Avila board-setup |
| * |
| * Author: Michael-Luke Jones <mlj28@cam.ac.uk> |
| * |
| * Based on ixdp-setup.c |
| * Copyright (C) 2003-2005 MontaVista Software, Inc. |
| * |
| * Author: Deepak Saxena <dsaxena@plexity.net> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/serial.h> |
| #include <linux/tty.h> |
| #include <linux/serial_8250.h> |
| #include <linux/i2c-gpio.h> |
| #include <asm/types.h> |
| #include <asm/setup.h> |
| #include <asm/memory.h> |
| #include <mach/hardware.h> |
| #include <asm/mach-types.h> |
| #include <asm/irq.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/flash.h> |
| |
| #define AVILA_SDA_PIN 7 |
| #define AVILA_SCL_PIN 6 |
| |
| static struct flash_platform_data avila_flash_data = { |
| .map_name = "cfi_probe", |
| .width = 2, |
| }; |
| |
| static struct resource avila_flash_resource = { |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device avila_flash = { |
| .name = "IXP4XX-Flash", |
| .id = 0, |
| .dev = { |
| .platform_data = &avila_flash_data, |
| }, |
| .num_resources = 1, |
| .resource = &avila_flash_resource, |
| }; |
| |
| static struct i2c_gpio_platform_data avila_i2c_gpio_data = { |
| .sda_pin = AVILA_SDA_PIN, |
| .scl_pin = AVILA_SCL_PIN, |
| }; |
| |
| static struct platform_device avila_i2c_gpio = { |
| .name = "i2c-gpio", |
| .id = 0, |
| .dev = { |
| .platform_data = &avila_i2c_gpio_data, |
| }, |
| }; |
| |
| static struct resource avila_uart_resources[] = { |
| { |
| .start = IXP4XX_UART1_BASE_PHYS, |
| .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .start = IXP4XX_UART2_BASE_PHYS, |
| .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, |
| .flags = IORESOURCE_MEM |
| } |
| }; |
| |
| static struct plat_serial8250_port avila_uart_data[] = { |
| { |
| .mapbase = IXP4XX_UART1_BASE_PHYS, |
| .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, |
| .irq = IRQ_IXP4XX_UART1, |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, |
| .iotype = UPIO_MEM, |
| .regshift = 2, |
| .uartclk = IXP4XX_UART_XTAL, |
| }, |
| { |
| .mapbase = IXP4XX_UART2_BASE_PHYS, |
| .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, |
| .irq = IRQ_IXP4XX_UART2, |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, |
| .iotype = UPIO_MEM, |
| .regshift = 2, |
| .uartclk = IXP4XX_UART_XTAL, |
| }, |
| { }, |
| }; |
| |
| static struct platform_device avila_uart = { |
| .name = "serial8250", |
| .id = PLAT8250_DEV_PLATFORM, |
| .dev.platform_data = avila_uart_data, |
| .num_resources = 2, |
| .resource = avila_uart_resources |
| }; |
| |
| static struct resource avila_pata_resources[] = { |
| { |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .name = "intrq", |
| .start = IRQ_IXP4XX_GPIO12, |
| .end = IRQ_IXP4XX_GPIO12, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct ixp4xx_pata_data avila_pata_data = { |
| .cs0_bits = 0xbfff0043, |
| .cs1_bits = 0xbfff0043, |
| }; |
| |
| static struct platform_device avila_pata = { |
| .name = "pata_ixp4xx_cf", |
| .id = 0, |
| .dev.platform_data = &avila_pata_data, |
| .num_resources = ARRAY_SIZE(avila_pata_resources), |
| .resource = avila_pata_resources, |
| }; |
| |
| static struct platform_device *avila_devices[] __initdata = { |
| &avila_i2c_gpio, |
| &avila_flash, |
| &avila_uart |
| }; |
| |
| static void __init avila_init(void) |
| { |
| ixp4xx_sys_init(); |
| |
| avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); |
| avila_flash_resource.end = |
| IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; |
| |
| platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices)); |
| |
| avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1); |
| avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1); |
| |
| avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2); |
| avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2); |
| |
| avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1; |
| avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2; |
| |
| platform_device_register(&avila_pata); |
| |
| } |
| |
| MACHINE_START(AVILA, "Gateworks Avila Network Platform") |
| /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */ |
| .map_io = ixp4xx_map_io, |
| .init_early = ixp4xx_init_early, |
| .init_irq = ixp4xx_init_irq, |
| .init_time = ixp4xx_timer_init, |
| .atag_offset = 0x100, |
| .init_machine = avila_init, |
| #if defined(CONFIG_PCI) |
| .dma_zone_size = SZ_64M, |
| #endif |
| .restart = ixp4xx_restart, |
| MACHINE_END |
| |
| /* |
| * Loft is functionally equivalent to Avila except that it has a |
| * different number for the maximum PCI devices. The MACHINE |
| * structure below is identical to Avila except for the comment. |
| */ |
| #ifdef CONFIG_MACH_LOFT |
| MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") |
| /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */ |
| .map_io = ixp4xx_map_io, |
| .init_early = ixp4xx_init_early, |
| .init_irq = ixp4xx_init_irq, |
| .init_time = ixp4xx_timer_init, |
| .atag_offset = 0x100, |
| .init_machine = avila_init, |
| #if defined(CONFIG_PCI) |
| .dma_zone_size = SZ_64M, |
| #endif |
| .restart = ixp4xx_restart, |
| MACHINE_END |
| #endif |
| |