| /* |
| * arch/arm/mach-orion5x/ts78xx-setup.c |
| * |
| * Maintainer: Alexander Clouter <alex@digriz.org.uk> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/sysfs.h> |
| #include <linux/platform_device.h> |
| #include <linux/mv643xx_eth.h> |
| #include <linux/ata_platform.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/timeriomem-rng.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include "common.h" |
| #include "mpp.h" |
| #include "orion5x.h" |
| #include "ts78xx-fpga.h" |
| |
| /***************************************************************************** |
| * TS-78xx Info |
| ****************************************************************************/ |
| |
| /* |
| * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE |
| */ |
| #define TS78XX_FPGA_REGS_PHYS_BASE 0xe8000000 |
| #define TS78XX_FPGA_REGS_VIRT_BASE IOMEM(0xff900000) |
| #define TS78XX_FPGA_REGS_SIZE SZ_1M |
| |
| static struct ts78xx_fpga_data ts78xx_fpga = { |
| .id = 0, |
| .state = 1, |
| /* .supports = ... - populated by ts78xx_fpga_supports() */ |
| }; |
| |
| /***************************************************************************** |
| * I/O Address Mapping |
| ****************************************************************************/ |
| static struct map_desc ts78xx_io_desc[] __initdata = { |
| { |
| .virtual = (unsigned long)TS78XX_FPGA_REGS_VIRT_BASE, |
| .pfn = __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE), |
| .length = TS78XX_FPGA_REGS_SIZE, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static void __init ts78xx_map_io(void) |
| { |
| orion5x_map_io(); |
| iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc)); |
| } |
| |
| /***************************************************************************** |
| * Ethernet |
| ****************************************************************************/ |
| static struct mv643xx_eth_platform_data ts78xx_eth_data = { |
| .phy_addr = MV643XX_ETH_PHY_ADDR(0), |
| }; |
| |
| /***************************************************************************** |
| * SATA |
| ****************************************************************************/ |
| static struct mv_sata_platform_data ts78xx_sata_data = { |
| .n_ports = 2, |
| }; |
| |
| /***************************************************************************** |
| * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c |
| ****************************************************************************/ |
| #define TS_RTC_CTRL (TS78XX_FPGA_REGS_PHYS_BASE + 0x808) |
| #define TS_RTC_DATA (TS78XX_FPGA_REGS_PHYS_BASE + 0x80c) |
| |
| static struct resource ts78xx_ts_rtc_resources[] = { |
| DEFINE_RES_MEM(TS_RTC_CTRL, 0x01), |
| DEFINE_RES_MEM(TS_RTC_DATA, 0x01), |
| }; |
| |
| static struct platform_device ts78xx_ts_rtc_device = { |
| .name = "rtc-m48t86", |
| .id = -1, |
| .resource = ts78xx_ts_rtc_resources, |
| .num_resources = ARRAY_SIZE(ts78xx_ts_rtc_resources), |
| }; |
| |
| static int ts78xx_ts_rtc_load(void) |
| { |
| int rc; |
| |
| if (ts78xx_fpga.supports.ts_rtc.init == 0) { |
| rc = platform_device_register(&ts78xx_ts_rtc_device); |
| if (!rc) |
| ts78xx_fpga.supports.ts_rtc.init = 1; |
| } else { |
| rc = platform_device_add(&ts78xx_ts_rtc_device); |
| } |
| |
| if (rc) |
| pr_info("RTC could not be registered: %d\n", rc); |
| |
| return rc; |
| } |
| |
| static void ts78xx_ts_rtc_unload(void) |
| { |
| platform_device_del(&ts78xx_ts_rtc_device); |
| } |
| |
| /***************************************************************************** |
| * NAND Flash |
| ****************************************************************************/ |
| #define TS_NAND_CTRL (TS78XX_FPGA_REGS_VIRT_BASE + 0x800) /* VIRT */ |
| #define TS_NAND_DATA (TS78XX_FPGA_REGS_PHYS_BASE + 0x804) /* PHYS */ |
| |
| /* |
| * hardware specific access to control-lines |
| * |
| * ctrl: |
| * NAND_NCE: bit 0 -> bit 2 |
| * NAND_CLE: bit 1 -> bit 1 |
| * NAND_ALE: bit 2 -> bit 0 |
| */ |
| static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, |
| unsigned int ctrl) |
| { |
| struct nand_chip *this = mtd_to_nand(mtd); |
| |
| if (ctrl & NAND_CTRL_CHANGE) { |
| unsigned char bits; |
| |
| bits = (ctrl & NAND_NCE) << 2; |
| bits |= ctrl & NAND_CLE; |
| bits |= (ctrl & NAND_ALE) >> 2; |
| |
| writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL); |
| } |
| |
| if (cmd != NAND_CMD_NONE) |
| writeb(cmd, this->IO_ADDR_W); |
| } |
| |
| static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd) |
| { |
| return readb(TS_NAND_CTRL) & 0x20; |
| } |
| |
| static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd, |
| const uint8_t *buf, int len) |
| { |
| struct nand_chip *chip = mtd_to_nand(mtd); |
| void __iomem *io_base = chip->IO_ADDR_W; |
| unsigned long off = ((unsigned long)buf & 3); |
| int sz; |
| |
| if (off) { |
| sz = min_t(int, 4 - off, len); |
| writesb(io_base, buf, sz); |
| buf += sz; |
| len -= sz; |
| } |
| |
| sz = len >> 2; |
| if (sz) { |
| u32 *buf32 = (u32 *)buf; |
| writesl(io_base, buf32, sz); |
| buf += sz << 2; |
| len -= sz << 2; |
| } |
| |
| if (len) |
| writesb(io_base, buf, len); |
| } |
| |
| static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd, |
| uint8_t *buf, int len) |
| { |
| struct nand_chip *chip = mtd_to_nand(mtd); |
| void __iomem *io_base = chip->IO_ADDR_R; |
| unsigned long off = ((unsigned long)buf & 3); |
| int sz; |
| |
| if (off) { |
| sz = min_t(int, 4 - off, len); |
| readsb(io_base, buf, sz); |
| buf += sz; |
| len -= sz; |
| } |
| |
| sz = len >> 2; |
| if (sz) { |
| u32 *buf32 = (u32 *)buf; |
| readsl(io_base, buf32, sz); |
| buf += sz << 2; |
| len -= sz << 2; |
| } |
| |
| if (len) |
| readsb(io_base, buf, len); |
| } |
| |
| static struct mtd_partition ts78xx_ts_nand_parts[] = { |
| { |
| .name = "mbr", |
| .offset = 0, |
| .size = SZ_128K, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "kernel", |
| .offset = MTDPART_OFS_APPEND, |
| .size = SZ_4M, |
| }, { |
| .name = "initrd", |
| .offset = MTDPART_OFS_APPEND, |
| .size = SZ_4M, |
| }, { |
| .name = "rootfs", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| } |
| }; |
| |
| static struct platform_nand_data ts78xx_ts_nand_data = { |
| .chip = { |
| .nr_chips = 1, |
| .partitions = ts78xx_ts_nand_parts, |
| .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts), |
| .chip_delay = 15, |
| .bbt_options = NAND_BBT_USE_FLASH, |
| }, |
| .ctrl = { |
| /* |
| * The HW ECC offloading functions, used to give about a 9% |
| * performance increase for 'dd if=/dev/mtdblockX' and 5% for |
| * nanddump. This all however was changed by git commit |
| * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is |
| * no performance advantage to be had so we no longer bother |
| */ |
| .cmd_ctrl = ts78xx_ts_nand_cmd_ctrl, |
| .dev_ready = ts78xx_ts_nand_dev_ready, |
| .write_buf = ts78xx_ts_nand_write_buf, |
| .read_buf = ts78xx_ts_nand_read_buf, |
| }, |
| }; |
| |
| static struct resource ts78xx_ts_nand_resources |
| = DEFINE_RES_MEM(TS_NAND_DATA, 4); |
| |
| static struct platform_device ts78xx_ts_nand_device = { |
| .name = "gen_nand", |
| .id = -1, |
| .dev = { |
| .platform_data = &ts78xx_ts_nand_data, |
| }, |
| .resource = &ts78xx_ts_nand_resources, |
| .num_resources = 1, |
| }; |
| |
| static int ts78xx_ts_nand_load(void) |
| { |
| int rc; |
| |
| if (ts78xx_fpga.supports.ts_nand.init == 0) { |
| rc = platform_device_register(&ts78xx_ts_nand_device); |
| if (!rc) |
| ts78xx_fpga.supports.ts_nand.init = 1; |
| } else |
| rc = platform_device_add(&ts78xx_ts_nand_device); |
| |
| if (rc) |
| pr_info("NAND could not be registered: %d\n", rc); |
| return rc; |
| }; |
| |
| static void ts78xx_ts_nand_unload(void) |
| { |
| platform_device_del(&ts78xx_ts_nand_device); |
| } |
| |
| /***************************************************************************** |
| * HW RNG |
| ****************************************************************************/ |
| #define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044) |
| |
| static struct resource ts78xx_ts_rng_resource |
| = DEFINE_RES_MEM(TS_RNG_DATA, 4); |
| |
| static struct timeriomem_rng_data ts78xx_ts_rng_data = { |
| .period = 1000000, /* one second */ |
| }; |
| |
| static struct platform_device ts78xx_ts_rng_device = { |
| .name = "timeriomem_rng", |
| .id = -1, |
| .dev = { |
| .platform_data = &ts78xx_ts_rng_data, |
| }, |
| .resource = &ts78xx_ts_rng_resource, |
| .num_resources = 1, |
| }; |
| |
| static int ts78xx_ts_rng_load(void) |
| { |
| int rc; |
| |
| if (ts78xx_fpga.supports.ts_rng.init == 0) { |
| rc = platform_device_register(&ts78xx_ts_rng_device); |
| if (!rc) |
| ts78xx_fpga.supports.ts_rng.init = 1; |
| } else |
| rc = platform_device_add(&ts78xx_ts_rng_device); |
| |
| if (rc) |
| pr_info("RNG could not be registered: %d\n", rc); |
| return rc; |
| }; |
| |
| static void ts78xx_ts_rng_unload(void) |
| { |
| platform_device_del(&ts78xx_ts_rng_device); |
| } |
| |
| /***************************************************************************** |
| * FPGA 'hotplug' support code |
| ****************************************************************************/ |
| static void ts78xx_fpga_devices_zero_init(void) |
| { |
| ts78xx_fpga.supports.ts_rtc.init = 0; |
| ts78xx_fpga.supports.ts_nand.init = 0; |
| ts78xx_fpga.supports.ts_rng.init = 0; |
| } |
| |
| static void ts78xx_fpga_supports(void) |
| { |
| /* TODO: put this 'table' into ts78xx-fpga.h */ |
| switch (ts78xx_fpga.id) { |
| case TS7800_REV_1: |
| case TS7800_REV_2: |
| case TS7800_REV_3: |
| case TS7800_REV_4: |
| case TS7800_REV_5: |
| case TS7800_REV_6: |
| case TS7800_REV_7: |
| case TS7800_REV_8: |
| case TS7800_REV_9: |
| ts78xx_fpga.supports.ts_rtc.present = 1; |
| ts78xx_fpga.supports.ts_nand.present = 1; |
| ts78xx_fpga.supports.ts_rng.present = 1; |
| break; |
| default: |
| /* enable devices if magic matches */ |
| switch ((ts78xx_fpga.id >> 8) & 0xffffff) { |
| case TS7800_FPGA_MAGIC: |
| pr_warn("unrecognised FPGA revision 0x%.2x\n", |
| ts78xx_fpga.id & 0xff); |
| ts78xx_fpga.supports.ts_rtc.present = 1; |
| ts78xx_fpga.supports.ts_nand.present = 1; |
| ts78xx_fpga.supports.ts_rng.present = 1; |
| break; |
| default: |
| ts78xx_fpga.supports.ts_rtc.present = 0; |
| ts78xx_fpga.supports.ts_nand.present = 0; |
| ts78xx_fpga.supports.ts_rng.present = 0; |
| } |
| } |
| } |
| |
| static int ts78xx_fpga_load_devices(void) |
| { |
| int tmp, ret = 0; |
| |
| if (ts78xx_fpga.supports.ts_rtc.present == 1) { |
| tmp = ts78xx_ts_rtc_load(); |
| if (tmp) |
| ts78xx_fpga.supports.ts_rtc.present = 0; |
| ret |= tmp; |
| } |
| if (ts78xx_fpga.supports.ts_nand.present == 1) { |
| tmp = ts78xx_ts_nand_load(); |
| if (tmp) |
| ts78xx_fpga.supports.ts_nand.present = 0; |
| ret |= tmp; |
| } |
| if (ts78xx_fpga.supports.ts_rng.present == 1) { |
| tmp = ts78xx_ts_rng_load(); |
| if (tmp) |
| ts78xx_fpga.supports.ts_rng.present = 0; |
| ret |= tmp; |
| } |
| |
| return ret; |
| } |
| |
| static int ts78xx_fpga_unload_devices(void) |
| { |
| int ret = 0; |
| |
| if (ts78xx_fpga.supports.ts_rtc.present == 1) |
| ts78xx_ts_rtc_unload(); |
| if (ts78xx_fpga.supports.ts_nand.present == 1) |
| ts78xx_ts_nand_unload(); |
| if (ts78xx_fpga.supports.ts_rng.present == 1) |
| ts78xx_ts_rng_unload(); |
| |
| return ret; |
| } |
| |
| static int ts78xx_fpga_load(void) |
| { |
| ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); |
| |
| pr_info("FPGA magic=0x%.6x, rev=0x%.2x\n", |
| (ts78xx_fpga.id >> 8) & 0xffffff, |
| ts78xx_fpga.id & 0xff); |
| |
| ts78xx_fpga_supports(); |
| |
| if (ts78xx_fpga_load_devices()) { |
| ts78xx_fpga.state = -1; |
| return -EBUSY; |
| } |
| |
| return 0; |
| }; |
| |
| static int ts78xx_fpga_unload(void) |
| { |
| unsigned int fpga_id; |
| |
| fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE); |
| |
| /* |
| * There does not seem to be a feasible way to block access to the GPIO |
| * pins from userspace (/dev/mem). This if clause should hopefully warn |
| * those foolish enough not to follow 'policy' :) |
| * |
| * UrJTAG SVN since r1381 can be used to reprogram the FPGA |
| */ |
| if (ts78xx_fpga.id != fpga_id) { |
| pr_err("FPGA magic/rev mismatch\n" |
| "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", |
| (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, |
| (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); |
| ts78xx_fpga.state = -1; |
| return -EBUSY; |
| } |
| |
| if (ts78xx_fpga_unload_devices()) { |
| ts78xx_fpga.state = -1; |
| return -EBUSY; |
| } |
| |
| return 0; |
| }; |
| |
| static ssize_t ts78xx_fpga_show(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| if (ts78xx_fpga.state < 0) |
| return sprintf(buf, "borked\n"); |
| |
| return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline"); |
| } |
| |
| static ssize_t ts78xx_fpga_store(struct kobject *kobj, |
| struct kobj_attribute *attr, const char *buf, size_t n) |
| { |
| int value, ret; |
| |
| if (ts78xx_fpga.state < 0) { |
| pr_err("FPGA borked, you must powercycle ASAP\n"); |
| return -EBUSY; |
| } |
| |
| if (strncmp(buf, "online", sizeof("online") - 1) == 0) |
| value = 1; |
| else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) |
| value = 0; |
| else |
| return -EINVAL; |
| |
| if (ts78xx_fpga.state == value) |
| return n; |
| |
| ret = (ts78xx_fpga.state == 0) |
| ? ts78xx_fpga_load() |
| : ts78xx_fpga_unload(); |
| |
| if (!(ret < 0)) |
| ts78xx_fpga.state = value; |
| |
| return n; |
| } |
| |
| static struct kobj_attribute ts78xx_fpga_attr = |
| __ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store); |
| |
| /***************************************************************************** |
| * General Setup |
| ****************************************************************************/ |
| static unsigned int ts78xx_mpp_modes[] __initdata = { |
| MPP0_UNUSED, |
| MPP1_GPIO, /* JTAG Clock */ |
| MPP2_GPIO, /* JTAG Data In */ |
| MPP3_GPIO, /* Lat ECP2 256 FPGA - PB2B */ |
| MPP4_GPIO, /* JTAG Data Out */ |
| MPP5_GPIO, /* JTAG TMS */ |
| MPP6_GPIO, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */ |
| MPP7_GPIO, /* Lat ECP2 256 FPGA - PB22B */ |
| MPP8_UNUSED, |
| MPP9_UNUSED, |
| MPP10_UNUSED, |
| MPP11_UNUSED, |
| MPP12_UNUSED, |
| MPP13_UNUSED, |
| MPP14_UNUSED, |
| MPP15_UNUSED, |
| MPP16_UART, |
| MPP17_UART, |
| MPP18_UART, |
| MPP19_UART, |
| /* |
| * MPP[20] PCI Clock Out 1 |
| * MPP[21] PCI Clock Out 0 |
| * MPP[22] Unused |
| * MPP[23] Unused |
| * MPP[24] Unused |
| * MPP[25] Unused |
| */ |
| 0, |
| }; |
| |
| static void __init ts78xx_init(void) |
| { |
| int ret; |
| |
| /* |
| * Setup basic Orion functions. Need to be called early. |
| */ |
| orion5x_init(); |
| |
| orion5x_mpp_conf(ts78xx_mpp_modes); |
| |
| /* |
| * Configure peripherals. |
| */ |
| orion5x_ehci0_init(); |
| orion5x_ehci1_init(); |
| orion5x_eth_init(&ts78xx_eth_data); |
| orion5x_sata_init(&ts78xx_sata_data); |
| orion5x_uart0_init(); |
| orion5x_uart1_init(); |
| orion5x_xor_init(); |
| |
| /* FPGA init */ |
| ts78xx_fpga_devices_zero_init(); |
| ret = ts78xx_fpga_load(); |
| ret = sysfs_create_file(firmware_kobj, &ts78xx_fpga_attr.attr); |
| if (ret) |
| pr_err("sysfs_create_file failed: %d\n", ret); |
| } |
| |
| MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") |
| /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */ |
| .atag_offset = 0x100, |
| .nr_irqs = ORION5X_NR_IRQS, |
| .init_machine = ts78xx_init, |
| .map_io = ts78xx_map_io, |
| .init_early = orion5x_init_early, |
| .init_irq = orion5x_init_irq, |
| .init_time = orion5x_timer_init, |
| .restart = orion5x_restart, |
| MACHINE_END |