| /* |
| * Spreadtrum SC9836 SoC DTS file |
| * |
| * Copyright (C) 2014, Spreadtrum Communications Inc. |
| * |
| * This file is licensed under a dual GPLv2 or X11 license. |
| */ |
| |
| #include "sharkl64.dtsi" |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "sprd,sc9836"; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| }; |
| |
| cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| }; |
| |
| cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| }; |
| }; |
| |
| etf@10003000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0 0x10003000 0 0x1000>; |
| clocks = <&clk26mhz>; |
| clock-names = "apb_pclk"; |
| port { |
| etf_in: endpoint { |
| slave-mode; |
| remote-endpoint = <&funnel_out_port0>; |
| }; |
| }; |
| }; |
| |
| funnel@10001000 { |
| compatible = "arm,coresight-funnel", "arm,primecell"; |
| reg = <0 0x10001000 0 0x1000>; |
| clocks = <&clk26mhz>; |
| clock-names = "apb_pclk"; |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* funnel output port */ |
| port@0 { |
| reg = <0>; |
| funnel_out_port0: endpoint { |
| remote-endpoint = <&etf_in>; |
| }; |
| }; |
| |
| /* funnel input port 0~3 is reserved for ETMs */ |
| port@1 { |
| reg = <4>; |
| funnel_in_port4: endpoint { |
| slave-mode; |
| remote-endpoint = <&stm_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| stm@10006000 { |
| compatible = "arm,coresight-stm", "arm,primecell"; |
| reg = <0 0x10006000 0 0x1000>, |
| <0 0x01000000 0 0x180000>; |
| reg-names = "stm-base", "stm-stimulus-base"; |
| clocks = <&clk26mhz>; |
| clock-names = "apb_pclk"; |
| port { |
| stm_out: endpoint { |
| remote-endpoint = <&funnel_in_port4>; |
| }; |
| }; |
| }; |
| |
| gic: interrupt-controller@12001000 { |
| compatible = "arm,gic-400"; |
| reg = <0 0x12001000 0 0x1000>, |
| <0 0x12002000 0 0x2000>, |
| <0 0x12004000 0 0x2000>, |
| <0 0x12006000 0 0x2000>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| psci { |
| compatible = "arm,psci"; |
| method = "smc"; |
| cpu_on = <0xc4000003>; |
| cpu_off = <0x84000002>; |
| cpu_suspend = <0xc4000001>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |