arch/arm/mach-mxs/mach-mxs.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2012 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
  * Version 2 or later at the following locations:
  *
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */

 #include <linux/clk.h>
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
 #include <linux/clocksource.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/irqchip/mxs.h>
 #include <linux/reboot.h>
 #include <linux/micrel_phy.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/sys_soc.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>

 #include "pm.h"

 /* MXS DIGCTL SAIF CLKMUX */
 #define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
 #define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
 #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
 #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3

 #define HW_DIGCTL_CHIPID	0x310
 #define HW_DIGCTL_CHIPID_MASK	(0xffff << 16)
 #define HW_DIGCTL_REV_MASK	0xff
 #define HW_DIGCTL_CHIPID_MX23	(0x3780 << 16)
 #define HW_DIGCTL_CHIPID_MX28	(0x2800 << 16)

 #define MXS_CHIP_REVISION_1_0	0x10
 #define MXS_CHIP_REVISION_1_1	0x11
 #define MXS_CHIP_REVISION_1_2	0x12
 #define MXS_CHIP_REVISION_1_3	0x13
 #define MXS_CHIP_REVISION_1_4	0x14
 #define MXS_CHIP_REV_UNKNOWN	0xff

 #define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))

 #define MXS_SET_ADDR		0x4
 #define MXS_CLR_ADDR		0x8
 #define MXS_TOG_ADDR		0xc

 static u32 chipid;
 static u32 socid;

 static void __iomem *reset_addr;

 static inline void __mxs_setl(u32 mask, void __iomem *reg)
 {
 	__raw_writel(mask, reg + MXS_SET_ADDR);
 }

 static inline void __mxs_clrl(u32 mask, void __iomem *reg)
 {
 	__raw_writel(mask, reg + MXS_CLR_ADDR);
 }

 static inline void __mxs_togl(u32 mask, void __iomem *reg)
 {
 	__raw_writel(mask, reg + MXS_TOG_ADDR);
 }

 #define OCOTP_WORD_OFFSET		0x20
 #define OCOTP_WORD_COUNT		0x20

 #define BM_OCOTP_CTRL_BUSY		(1 << 8)
 #define BM_OCOTP_CTRL_ERROR		(1 << 9)
 #define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)

 static DEFINE_MUTEX(ocotp_mutex);
 static u32 ocotp_words[OCOTP_WORD_COUNT];

 static const u32 *mxs_get_ocotp(void)
 {
 	struct device_node *np;
 	void __iomem *ocotp_base;
 	int timeout = 0x400;
 	size_t i;
 	static int once;

 	if (once)
 		return ocotp_words;

 	np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
 	ocotp_base = of_iomap(np, 0);
 	WARN_ON(!ocotp_base);

 	mutex_lock(&ocotp_mutex);

 	/*
 	 * clk_enable(hbus_clk) for ocotp can be skipped
 	 * as it must be on when system is running.
 	 */

 	/* try to clear ERROR bit */
 	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);

 	/* check both BUSY and ERROR cleared */
 	while ((__raw_readl(ocotp_base) &
 		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
 		cpu_relax();

 	if (unlikely(!timeout))
 		goto error_unlock;

 	/* open OCOTP banks for read */
 	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);

 	/* approximately wait 32 hclk cycles */
 	udelay(1);

 	/* poll BUSY bit becoming cleared */
 	timeout = 0x400;
 	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
 		cpu_relax();

 	if (unlikely(!timeout))
 		goto error_unlock;

 	for (i = 0; i < OCOTP_WORD_COUNT; i++)
 		ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
 						i * 0x10);

 	/* close banks for power saving */
 	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);

 	once = 1;

 	mutex_unlock(&ocotp_mutex);

 	return ocotp_words;

 error_unlock:
 	mutex_unlock(&ocotp_mutex);
 	pr_err("%s: timeout in reading OCOTP\n", __func__);
 	return NULL;
 }

 enum mac_oui {
 	OUI_FSL,
 	OUI_DENX,
 	OUI_CRYSTALFONTZ,
 };

 static void __init update_fec_mac_prop(enum mac_oui oui)
 {
 	struct device_node *np, *from = NULL;
 	struct property *newmac;
 	const u32 *ocotp = mxs_get_ocotp();
 	u8 *macaddr;
 	u32 val;
 	int i;

 	for (i = 0; i < 2; i++) {
 		np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
 		if (!np)
 			return;

 		from = np;

 		if (of_get_property(np, "local-mac-address", NULL))
 			continue;

 		newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
 		if (!newmac)
 			return;
 		newmac->value = newmac + 1;
 		newmac->length = 6;

 		newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
 		if (!newmac->name) {
 			kfree(newmac);
 			return;
 		}

 		/*
 		 * OCOTP only stores the last 4 octets for each mac address,
 		 * so hard-code OUI here.
 		 */
 		macaddr = newmac->value;
 		switch (oui) {
 		case OUI_FSL:
 			macaddr[0] = 0x00;
 			macaddr[1] = 0x04;
 			macaddr[2] = 0x9f;
 			break;
 		case OUI_DENX:
 			macaddr[0] = 0xc0;
 			macaddr[1] = 0xe5;
 			macaddr[2] = 0x4e;
 			break;
 		case OUI_CRYSTALFONTZ:
 			macaddr[0] = 0x58;
 			macaddr[1] = 0xb9;
 			macaddr[2] = 0xe1;
 			break;
 		}
 		val = ocotp[i];
 		macaddr[3] = (val >> 16) & 0xff;
 		macaddr[4] = (val >> 8) & 0xff;
 		macaddr[5] = (val >> 0) & 0xff;

 		of_update_property(np, newmac);
 	}
 }

 static inline void enable_clk_enet_out(void)
 {
 	struct clk *clk = clk_get_sys("enet_out", NULL);

 	if (!IS_ERR(clk))
 		clk_prepare_enable(clk);
 }

 static void __init imx28_evk_init(void)
 {
 	update_fec_mac_prop(OUI_FSL);

 	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }

 static int apx4devkit_phy_fixup(struct phy_device *phy)
 {
 	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
 	return 0;
 }

 static void __init apx4devkit_init(void)
 {
 	enable_clk_enet_out();

 	if (IS_BUILTIN(CONFIG_PHYLIB))
 		phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK,
 					   apx4devkit_phy_fixup);
 }

 #define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
 #define ENET0_MDIO__GPIO_4_1	MXS_GPIO_NR(4, 1)
 #define ENET0_RX_EN__GPIO_4_2	MXS_GPIO_NR(4, 2)
 #define ENET0_RXD0__GPIO_4_3	MXS_GPIO_NR(4, 3)
 #define ENET0_RXD1__GPIO_4_4	MXS_GPIO_NR(4, 4)
 #define ENET0_TX_EN__GPIO_4_6	MXS_GPIO_NR(4, 6)
 #define ENET0_TXD0__GPIO_4_7	MXS_GPIO_NR(4, 7)
 #define ENET0_TXD1__GPIO_4_8	MXS_GPIO_NR(4, 8)
 #define ENET_CLK__GPIO_4_16	MXS_GPIO_NR(4, 16)

 #define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
 #define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
 #define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)

 static const struct gpio tx28_gpios[] __initconst = {
 	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
 	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
 	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
 	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
 	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
 	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
 	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
 	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
 	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
 	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
 	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
 	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
 };

 static void __init tx28_post_init(void)
 {
 	struct device_node *np;
 	struct platform_device *pdev;
 	struct pinctrl *pctl;
 	int ret;

 	enable_clk_enet_out();

 	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
 	pdev = of_find_device_by_node(np);
 	if (!pdev) {
 		pr_err("%s: failed to find fec device\n", __func__);
 		return;
 	}

 	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
 	if (IS_ERR(pctl)) {
 		pr_err("%s: failed to get pinctrl state\n", __func__);
 		return;
 	}

 	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
 	if (ret) {
 		pr_err("%s: failed to request gpios: %d\n", __func__, ret);
 		return;
 	}

 	/* Power up fec phy */
 	gpio_set_value(TX28_FEC_PHY_POWER, 1);
 	msleep(26); /* 25ms according to data sheet */

 	/* Mode strap pins */
 	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
 	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
 	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);

 	udelay(100); /* minimum assertion time for nRST */

 	/* Deasserting FEC PHY RESET */
 	gpio_set_value(TX28_FEC_PHY_RESET, 1);

 	pinctrl_put(pctl);
 }

 static void __init crystalfontz_init(void)
 {
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
 }

 static const char __init *mxs_get_soc_id(void)
 {
 	struct device_node *np;
 	void __iomem *digctl_base;

 	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
 	digctl_base = of_iomap(np, 0);
 	WARN_ON(!digctl_base);

 	chipid = readl(digctl_base + HW_DIGCTL_CHIPID);
 	socid = chipid & HW_DIGCTL_CHIPID_MASK;

 	iounmap(digctl_base);
 	of_node_put(np);

 	switch (socid) {
 	case HW_DIGCTL_CHIPID_MX23:
 		return "i.MX23";
 	case HW_DIGCTL_CHIPID_MX28:
 		return "i.MX28";
 	default:
 		return "Unknown";
 	}
 }

 static u32 __init mxs_get_cpu_rev(void)
 {
 	u32 rev = chipid & HW_DIGCTL_REV_MASK;

 	switch (socid) {
 	case HW_DIGCTL_CHIPID_MX23:
 		switch (rev) {
 		case 0x0:
 			return MXS_CHIP_REVISION_1_0;
 		case 0x1:
 			return MXS_CHIP_REVISION_1_1;
 		case 0x2:
 			return MXS_CHIP_REVISION_1_2;
 		case 0x3:
 			return MXS_CHIP_REVISION_1_3;
 		case 0x4:
 			return MXS_CHIP_REVISION_1_4;
 		default:
 			return MXS_CHIP_REV_UNKNOWN;
 		}
 	case HW_DIGCTL_CHIPID_MX28:
 		switch (rev) {
 		case 0x0:
 			return MXS_CHIP_REVISION_1_1;
 		case 0x1:
 			return MXS_CHIP_REVISION_1_2;
 		default:
 			return MXS_CHIP_REV_UNKNOWN;
 		}
 	default:
 		return MXS_CHIP_REV_UNKNOWN;
 	}
 }

 static const char __init *mxs_get_revision(void)
 {
 	u32 rev = mxs_get_cpu_rev();

 	if (rev != MXS_CHIP_REV_UNKNOWN)
 		return kasprintf(GFP_KERNEL, "%d.%d", (rev >> 4) & 0xf,
 				rev & 0xf);
 	else
 		return kasprintf(GFP_KERNEL, "%s", "Unknown");
 }

 #define MX23_CLKCTRL_RESET_OFFSET	0x120
 #define MX28_CLKCTRL_RESET_OFFSET	0x1e0

 static int __init mxs_restart_init(void)
 {
 	struct device_node *np;

 	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
 	reset_addr = of_iomap(np, 0);
 	if (!reset_addr)
 		return -ENODEV;

 	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
 		reset_addr += MX23_CLKCTRL_RESET_OFFSET;
 	else
 		reset_addr += MX28_CLKCTRL_RESET_OFFSET;
 	of_node_put(np);

 	return 0;
 }

 static void __init mxs_machine_init(void)
 {
 	struct device_node *root;
 	struct device *parent;
 	struct soc_device *soc_dev;
 	struct soc_device_attribute *soc_dev_attr;
 	int ret;

 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
 	if (!soc_dev_attr)
 		return;

 	root = of_find_node_by_path("/");
 	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
 	if (ret)
 		return;

 	soc_dev_attr->family = "Freescale MXS Family";
 	soc_dev_attr->soc_id = mxs_get_soc_id();
 	soc_dev_attr->revision = mxs_get_revision();

 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr->revision);
 		kfree(soc_dev_attr);
 		return;
 	}

 	parent = soc_device_to_device(soc_dev);

 	if (of_machine_is_compatible("fsl,imx28-evk"))
 		imx28_evk_init();
 	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
 		apx4devkit_init();
 	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
 		crystalfontz_init();

 	of_platform_populate(NULL, of_default_bus_match_table,
 			     NULL, parent);

 	mxs_restart_init();

 	if (of_machine_is_compatible("karo,tx28"))
 		tx28_post_init();
 }

 #define MXS_CLKCTRL_RESET_CHIP		(1 << 1)

 /*
  * Reset the system. It is called by machine_restart().
  */
 static void mxs_restart(enum reboot_mode mode, const char *cmd)
 {
 	if (reset_addr) {
 		/* reset the chip */
 		__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);

 		pr_err("Failed to assert the chip reset\n");

 		/* Delay to allow the serial port to show the message */
 		mdelay(50);
 	}

 	/* We'll take a jump through zero as a poor second */
 	soft_restart(0);
 }

 static void __init mxs_timer_init(void)
 {
 	if (of_machine_is_compatible("fsl,imx23"))
 		mx23_clocks_init();
 	else
 		mx28_clocks_init();
 	of_clk_init(NULL);
 	clocksource_of_init();
 }

 static const char *mxs_dt_compat[] __initdata = {
 	"fsl,imx28",
 	"fsl,imx23",
 	NULL,
 };

 DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
 	.handle_irq	= icoll_handle_irq,
 	.init_time	= mxs_timer_init,
 	.init_machine	= mxs_machine_init,
 	.init_late      = mxs_pm_init,
 	.dt_compat	= mxs_dt_compat,
 	.restart	= mxs_restart,
 MACHINE_END
	/*
	* Copyright 2012 Freescale Semiconductor, Inc.
	* Copyright 2012 Linaro Ltd.
	*
	* The code contained herein is licensed under the GNU General Public
	* License. You may obtain a copy of the GNU General Public License
	* Version 2 or later at the following locations:
	*
	* http://www.opensource.org/licenses/gpl-license.html
	* http://www.gnu.org/copyleft/gpl.html
	*/

	#include <linux/clk.h>
	#include <linux/clk/mxs.h>
	#include <linux/clkdev.h>
	#include <linux/clocksource.h>
	#include <linux/clk-provider.h>
	#include <linux/delay.h>
	#include <linux/err.h>
	#include <linux/gpio.h>
	#include <linux/init.h>
	#include <linux/irqchip/mxs.h>
	#include <linux/reboot.h>
	#include <linux/micrel_phy.h>
	#include <linux/of_address.h>
	#include <linux/of_platform.h>
	#include <linux/phy.h>
	#include <linux/pinctrl/consumer.h>
	#include <linux/sys_soc.h>
	#include <asm/mach/arch.h>
	#include <asm/mach/map.h>
	#include <asm/mach/time.h>
	#include <asm/system_misc.h>

	#include "pm.h"

	/* MXS DIGCTL SAIF CLKMUX */
	#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0
	#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1
	#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
	#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3

	#define HW_DIGCTL_CHIPID 0x310
	#define HW_DIGCTL_CHIPID_MASK (0xffff << 16)
	#define HW_DIGCTL_REV_MASK 0xff
	#define HW_DIGCTL_CHIPID_MX23 (0x3780 << 16)
	#define HW_DIGCTL_CHIPID_MX28 (0x2800 << 16)

	#define MXS_CHIP_REVISION_1_0 0x10
	#define MXS_CHIP_REVISION_1_1 0x11
	#define MXS_CHIP_REVISION_1_2 0x12
	#define MXS_CHIP_REVISION_1_3 0x13
	#define MXS_CHIP_REVISION_1_4 0x14
	#define MXS_CHIP_REV_UNKNOWN 0xff

	#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))

	#define MXS_SET_ADDR 0x4
	#define MXS_CLR_ADDR 0x8
	#define MXS_TOG_ADDR 0xc

	static u32 chipid;
	static u32 socid;

	static void __iomem *reset_addr;

	static inline void __mxs_setl(u32 mask, void __iomem *reg)
	{
	__raw_writel(mask, reg + MXS_SET_ADDR);
	}

	static inline void __mxs_clrl(u32 mask, void __iomem *reg)
	{
	__raw_writel(mask, reg + MXS_CLR_ADDR);
	}

	static inline void __mxs_togl(u32 mask, void __iomem *reg)
	{
	__raw_writel(mask, reg + MXS_TOG_ADDR);
	}

	#define OCOTP_WORD_OFFSET 0x20
	#define OCOTP_WORD_COUNT 0x20

	#define BM_OCOTP_CTRL_BUSY (1 << 8)
	#define BM_OCOTP_CTRL_ERROR (1 << 9)
	#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12)

	static DEFINE_MUTEX(ocotp_mutex);
	static u32 ocotp_words[OCOTP_WORD_COUNT];

	static const u32 *mxs_get_ocotp(void)
	{
	struct device_node *np;
	void __iomem *ocotp_base;
	int timeout = 0x400;
	size_t i;
	static int once;

	if (once)
	return ocotp_words;

	np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
	ocotp_base = of_iomap(np, 0);
	WARN_ON(!ocotp_base);

	mutex_lock(&ocotp_mutex);

	/*
	* clk_enable(hbus_clk) for ocotp can be skipped
	* as it must be on when system is running.
	*/

	/* try to clear ERROR bit */
	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);

	/* check both BUSY and ERROR cleared */
	while ((__raw_readl(ocotp_base) &
	(BM_OCOTP_CTRL_BUSY \| BM_OCOTP_CTRL_ERROR)) && --timeout)
	cpu_relax();

	if (unlikely(!timeout))
	goto error_unlock;

	/* open OCOTP banks for read */
	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);

	/* approximately wait 32 hclk cycles */
	udelay(1);

	/* poll BUSY bit becoming cleared */
	timeout = 0x400;
	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
	cpu_relax();

	if (unlikely(!timeout))
	goto error_unlock;

	for (i = 0; i < OCOTP_WORD_COUNT; i++)
	ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
	i * 0x10);

	/* close banks for power saving */
	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);

	once = 1;

	mutex_unlock(&ocotp_mutex);

	return ocotp_words;

	error_unlock:
	mutex_unlock(&ocotp_mutex);
	pr_err("%s: timeout in reading OCOTP\n", __func__);
	return NULL;
	}

	enum mac_oui {
	OUI_FSL,
	OUI_DENX,
	OUI_CRYSTALFONTZ,
	};

	static void __init update_fec_mac_prop(enum mac_oui oui)
	{
	struct device_node np, from = NULL;
	struct property *newmac;
	const u32 *ocotp = mxs_get_ocotp();
	u8 *macaddr;
	u32 val;
	int i;

	for (i = 0; i < 2; i++) {
	np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
	if (!np)
	return;

	from = np;

	if (of_get_property(np, "local-mac-address", NULL))
	continue;

	newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
	if (!newmac)
	return;
	newmac->value = newmac + 1;
	newmac->length = 6;

	newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
	if (!newmac->name) {
	kfree(newmac);
	return;
	}

	/*
	* OCOTP only stores the last 4 octets for each mac address,
	* so hard-code OUI here.
	*/
	macaddr = newmac->value;
	switch (oui) {
	case OUI_FSL:
	macaddr[0] = 0x00;
	macaddr[1] = 0x04;
	macaddr[2] = 0x9f;
	break;
	case OUI_DENX:
	macaddr[0] = 0xc0;
	macaddr[1] = 0xe5;
	macaddr[2] = 0x4e;
	break;
	case OUI_CRYSTALFONTZ:
	macaddr[0] = 0x58;
	macaddr[1] = 0xb9;
	macaddr[2] = 0xe1;
	break;
	}
	val = ocotp[i];
	macaddr[3] = (val >> 16) & 0xff;
	macaddr[4] = (val >> 8) & 0xff;
	macaddr[5] = (val >> 0) & 0xff;

	of_update_property(np, newmac);
	}
	}

	static inline void enable_clk_enet_out(void)
	{
	struct clk *clk = clk_get_sys("enet_out", NULL);

	if (!IS_ERR(clk))
	clk_prepare_enable(clk);
	}

	static void __init imx28_evk_init(void)
	{
	update_fec_mac_prop(OUI_FSL);

	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
	}

	static int apx4devkit_phy_fixup(struct phy_device *phy)
	{
	phy->dev_flags \|= MICREL_PHY_50MHZ_CLK;
	return 0;
	}

	static void __init apx4devkit_init(void)
	{
	enable_clk_enet_out();

	if (IS_BUILTIN(CONFIG_PHYLIB))
	phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK,
	apx4devkit_phy_fixup);
	}

	#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
	#define ENET0_MDIO__GPIO_4_1 MXS_GPIO_NR(4, 1)
	#define ENET0_RX_EN__GPIO_4_2 MXS_GPIO_NR(4, 2)
	#define ENET0_RXD0__GPIO_4_3 MXS_GPIO_NR(4, 3)
	#define ENET0_RXD1__GPIO_4_4 MXS_GPIO_NR(4, 4)
	#define ENET0_TX_EN__GPIO_4_6 MXS_GPIO_NR(4, 6)
	#define ENET0_TXD0__GPIO_4_7 MXS_GPIO_NR(4, 7)
	#define ENET0_TXD1__GPIO_4_8 MXS_GPIO_NR(4, 8)
	#define ENET_CLK__GPIO_4_16 MXS_GPIO_NR(4, 16)

	#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29)
	#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
	#define TX28_FEC_nINT MXS_GPIO_NR(4, 5)

	static const struct gpio tx28_gpios[] __initconst = {
	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
	};

	static void __init tx28_post_init(void)
	{
	struct device_node *np;
	struct platform_device *pdev;
	struct pinctrl *pctl;
	int ret;

	enable_clk_enet_out();

	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
	pdev = of_find_device_by_node(np);
	if (!pdev) {
	pr_err("%s: failed to find fec device\n", __func__);
	return;
	}

	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
	if (IS_ERR(pctl)) {
	pr_err("%s: failed to get pinctrl state\n", __func__);
	return;
	}

	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
	if (ret) {
	pr_err("%s: failed to request gpios: %d\n", __func__, ret);
	return;
	}

	/* Power up fec phy */
	gpio_set_value(TX28_FEC_PHY_POWER, 1);
	msleep(26); /* 25ms according to data sheet */

	/* Mode strap pins */
	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);

	udelay(100); /* minimum assertion time for nRST */

	/* Deasserting FEC PHY RESET */
	gpio_set_value(TX28_FEC_PHY_RESET, 1);

	pinctrl_put(pctl);
	}

	static void __init crystalfontz_init(void)
	{
	update_fec_mac_prop(OUI_CRYSTALFONTZ);
	}

	static const char __init *mxs_get_soc_id(void)
	{
	struct device_node *np;
	void __iomem *digctl_base;

	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
	digctl_base = of_iomap(np, 0);
	WARN_ON(!digctl_base);

	chipid = readl(digctl_base + HW_DIGCTL_CHIPID);
	socid = chipid & HW_DIGCTL_CHIPID_MASK;

	iounmap(digctl_base);
	of_node_put(np);

	switch (socid) {
	case HW_DIGCTL_CHIPID_MX23:
	return "i.MX23";
	case HW_DIGCTL_CHIPID_MX28:
	return "i.MX28";
	default:
	return "Unknown";
	}
	}

	static u32 __init mxs_get_cpu_rev(void)
	{
	u32 rev = chipid & HW_DIGCTL_REV_MASK;

	switch (socid) {
	case HW_DIGCTL_CHIPID_MX23:
	switch (rev) {
	case 0x0:
	return MXS_CHIP_REVISION_1_0;
	case 0x1:
	return MXS_CHIP_REVISION_1_1;
	case 0x2:
	return MXS_CHIP_REVISION_1_2;
	case 0x3:
	return MXS_CHIP_REVISION_1_3;
	case 0x4:
	return MXS_CHIP_REVISION_1_4;
	default:
	return MXS_CHIP_REV_UNKNOWN;
	}
	case HW_DIGCTL_CHIPID_MX28:
	switch (rev) {
	case 0x0:
	return MXS_CHIP_REVISION_1_1;
	case 0x1:
	return MXS_CHIP_REVISION_1_2;
	default:
	return MXS_CHIP_REV_UNKNOWN;
	}
	default:
	return MXS_CHIP_REV_UNKNOWN;
	}
	}

	static const char __init *mxs_get_revision(void)
	{
	u32 rev = mxs_get_cpu_rev();

	if (rev != MXS_CHIP_REV_UNKNOWN)
	return kasprintf(GFP_KERNEL, "%d.%d", (rev >> 4) & 0xf,
	rev & 0xf);
	else
	return kasprintf(GFP_KERNEL, "%s", "Unknown");
	}

	#define MX23_CLKCTRL_RESET_OFFSET 0x120
	#define MX28_CLKCTRL_RESET_OFFSET 0x1e0

	static int __init mxs_restart_init(void)
	{
	struct device_node *np;

	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
	reset_addr = of_iomap(np, 0);
	if (!reset_addr)
	return -ENODEV;

	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
	reset_addr += MX23_CLKCTRL_RESET_OFFSET;
	else
	reset_addr += MX28_CLKCTRL_RESET_OFFSET;
	of_node_put(np);

	return 0;
	}

	static void __init mxs_machine_init(void)
	{
	struct device_node *root;
	struct device *parent;
	struct soc_device *soc_dev;
	struct soc_device_attribute *soc_dev_attr;
	int ret;

	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
	if (!soc_dev_attr)
	return;

	root = of_find_node_by_path("/");
	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
	if (ret)
	return;

	soc_dev_attr->family = "Freescale MXS Family";
	soc_dev_attr->soc_id = mxs_get_soc_id();
	soc_dev_attr->revision = mxs_get_revision();

	soc_dev = soc_device_register(soc_dev_attr);
	if (IS_ERR(soc_dev)) {
	kfree(soc_dev_attr->revision);
	kfree(soc_dev_attr);
	return;
	}

	parent = soc_device_to_device(soc_dev);

	if (of_machine_is_compatible("fsl,imx28-evk"))
	imx28_evk_init();
	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
	apx4devkit_init();
	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
	crystalfontz_init();

	of_platform_populate(NULL, of_default_bus_match_table,
	NULL, parent);

	mxs_restart_init();

	if (of_machine_is_compatible("karo,tx28"))
	tx28_post_init();
	}

	#define MXS_CLKCTRL_RESET_CHIP (1 << 1)

	/*
	* Reset the system. It is called by machine_restart().
	*/
	static void mxs_restart(enum reboot_mode mode, const char *cmd)
	{
	if (reset_addr) {
	/* reset the chip */
	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);

	pr_err("Failed to assert the chip reset\n");

	/* Delay to allow the serial port to show the message */
	mdelay(50);
	}

	/* We'll take a jump through zero as a poor second */
	soft_restart(0);
	}

	static void __init mxs_timer_init(void)
	{
	if (of_machine_is_compatible("fsl,imx23"))
	mx23_clocks_init();
	else
	mx28_clocks_init();
	of_clk_init(NULL);
	clocksource_of_init();
	}

	static const char *mxs_dt_compat[] __initdata = {
	"fsl,imx28",
	"fsl,imx23",
	NULL,
	};

	DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
	.handle_irq = icoll_handle_irq,
	.init_time = mxs_timer_init,
	.init_machine = mxs_machine_init,
	.init_late = mxs_pm_init,
	.dt_compat = mxs_dt_compat,
	.restart = mxs_restart,
	MACHINE_END