| |
| /****************************************************************************** |
| * |
| * Module Name: hwgpe - Low level GPE enable/disable/clear functions |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2008, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acevents.h" |
| |
| #define _COMPONENT ACPI_HARDWARE |
| ACPI_MODULE_NAME("hwgpe") |
| |
| /* Local prototypes */ |
| static acpi_status |
| acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, |
| struct acpi_gpe_block_info *gpe_block, |
| void *context); |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_low_disable_gpe |
| * |
| * PARAMETERS: gpe_event_info - Info block for the GPE to be disabled |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Disable a single GPE in the enable register. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) |
| { |
| struct acpi_gpe_register_info *gpe_register_info; |
| acpi_status status; |
| u32 enable_mask; |
| |
| /* Get the info block for the entire GPE register */ |
| |
| gpe_register_info = gpe_event_info->register_info; |
| if (!gpe_register_info) { |
| return (AE_NOT_EXIST); |
| } |
| |
| /* Get current value of the enable register that contains this GPE */ |
| |
| status = acpi_read(&enable_mask, &gpe_register_info->enable_address); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| /* Clear just the bit that corresponds to this GPE */ |
| |
| ACPI_CLEAR_BIT(enable_mask, |
| ((u32) 1 << |
| (gpe_event_info->gpe_number - |
| gpe_register_info->base_gpe_number))); |
| |
| /* Write the updated enable mask */ |
| |
| status = acpi_write(enable_mask, &gpe_register_info->enable_address); |
| return (status); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_write_gpe_enable_reg |
| * |
| * PARAMETERS: gpe_event_info - Info block for the GPE to be enabled |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Write a GPE enable register. Note: The bit for this GPE must |
| * already be cleared or set in the parent register |
| * enable_for_run mask. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info) |
| { |
| struct acpi_gpe_register_info *gpe_register_info; |
| acpi_status status; |
| |
| ACPI_FUNCTION_ENTRY(); |
| |
| /* Get the info block for the entire GPE register */ |
| |
| gpe_register_info = gpe_event_info->register_info; |
| if (!gpe_register_info) { |
| return (AE_NOT_EXIST); |
| } |
| |
| /* Write the entire GPE (runtime) enable register */ |
| |
| status = acpi_write(gpe_register_info->enable_for_run, |
| &gpe_register_info->enable_address); |
| |
| return (status); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_clear_gpe |
| * |
| * PARAMETERS: gpe_event_info - Info block for the GPE to be cleared |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Clear the status bit for a single GPE. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info) |
| { |
| acpi_status status; |
| u8 register_bit; |
| |
| ACPI_FUNCTION_ENTRY(); |
| |
| register_bit = (u8) |
| (1 << |
| (gpe_event_info->gpe_number - |
| gpe_event_info->register_info->base_gpe_number)); |
| |
| /* |
| * Write a one to the appropriate bit in the status register to |
| * clear this GPE. |
| */ |
| status = acpi_write(register_bit, |
| &gpe_event_info->register_info->status_address); |
| |
| return (status); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_get_gpe_status |
| * |
| * PARAMETERS: gpe_event_info - Info block for the GPE to queried |
| * event_status - Where the GPE status is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Return the status of a single GPE. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, |
| acpi_event_status * event_status) |
| { |
| u32 in_byte; |
| u8 register_bit; |
| struct acpi_gpe_register_info *gpe_register_info; |
| acpi_status status; |
| acpi_event_status local_event_status = 0; |
| |
| ACPI_FUNCTION_ENTRY(); |
| |
| if (!event_status) { |
| return (AE_BAD_PARAMETER); |
| } |
| |
| /* Get the info block for the entire GPE register */ |
| |
| gpe_register_info = gpe_event_info->register_info; |
| |
| /* Get the register bitmask for this GPE */ |
| |
| register_bit = (u8) |
| (1 << |
| (gpe_event_info->gpe_number - |
| gpe_event_info->register_info->base_gpe_number)); |
| |
| /* GPE currently enabled? (enabled for runtime?) */ |
| |
| if (register_bit & gpe_register_info->enable_for_run) { |
| local_event_status |= ACPI_EVENT_FLAG_ENABLED; |
| } |
| |
| /* GPE enabled for wake? */ |
| |
| if (register_bit & gpe_register_info->enable_for_wake) { |
| local_event_status |= ACPI_EVENT_FLAG_WAKE_ENABLED; |
| } |
| |
| /* GPE currently active (status bit == 1)? */ |
| |
| status = acpi_read(&in_byte, &gpe_register_info->status_address); |
| if (ACPI_FAILURE(status)) { |
| goto unlock_and_exit; |
| } |
| |
| if (register_bit & in_byte) { |
| local_event_status |= ACPI_EVENT_FLAG_SET; |
| } |
| |
| /* Set return value */ |
| |
| (*event_status) = local_event_status; |
| |
| unlock_and_exit: |
| return (status); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_disable_gpe_block |
| * |
| * PARAMETERS: gpe_xrupt_info - GPE Interrupt info |
| * gpe_block - Gpe Block info |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Disable all GPEs within a single GPE block |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, |
| struct acpi_gpe_block_info *gpe_block, void *context) |
| { |
| u32 i; |
| acpi_status status; |
| |
| /* Examine each GPE Register within the block */ |
| |
| for (i = 0; i < gpe_block->register_count; i++) { |
| |
| /* Disable all GPEs in this register */ |
| |
| status = |
| acpi_write(0x00, |
| &gpe_block->register_info[i].enable_address); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| } |
| |
| return (AE_OK); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_clear_gpe_block |
| * |
| * PARAMETERS: gpe_xrupt_info - GPE Interrupt info |
| * gpe_block - Gpe Block info |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Clear status bits for all GPEs within a single GPE block |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, |
| struct acpi_gpe_block_info *gpe_block, void *context) |
| { |
| u32 i; |
| acpi_status status; |
| |
| /* Examine each GPE Register within the block */ |
| |
| for (i = 0; i < gpe_block->register_count; i++) { |
| |
| /* Clear status on all GPEs in this register */ |
| |
| status = |
| acpi_write(0xFF, |
| &gpe_block->register_info[i].status_address); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| } |
| |
| return (AE_OK); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_enable_runtime_gpe_block |
| * |
| * PARAMETERS: gpe_xrupt_info - GPE Interrupt info |
| * gpe_block - Gpe Block info |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes |
| * combination wake/run GPEs. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, |
| struct acpi_gpe_block_info *gpe_block, void *context) |
| { |
| u32 i; |
| acpi_status status; |
| |
| /* NOTE: assumes that all GPEs are currently disabled */ |
| |
| /* Examine each GPE Register within the block */ |
| |
| for (i = 0; i < gpe_block->register_count; i++) { |
| if (!gpe_block->register_info[i].enable_for_run) { |
| continue; |
| } |
| |
| /* Enable all "runtime" GPEs in this register */ |
| |
| status = acpi_write(gpe_block->register_info[i].enable_for_run, |
| &gpe_block->register_info[i]. |
| enable_address); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| } |
| |
| return (AE_OK); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_enable_wakeup_gpe_block |
| * |
| * PARAMETERS: gpe_xrupt_info - GPE Interrupt info |
| * gpe_block - Gpe Block info |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes |
| * combination wake/run GPEs. |
| * |
| ******************************************************************************/ |
| |
| static acpi_status |
| acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, |
| struct acpi_gpe_block_info *gpe_block, |
| void *context) |
| { |
| u32 i; |
| acpi_status status; |
| |
| /* Examine each GPE Register within the block */ |
| |
| for (i = 0; i < gpe_block->register_count; i++) { |
| if (!gpe_block->register_info[i].enable_for_wake) { |
| continue; |
| } |
| |
| /* Enable all "wake" GPEs in this register */ |
| |
| status = acpi_write(gpe_block->register_info[i].enable_for_wake, |
| &gpe_block->register_info[i]. |
| enable_address); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| } |
| |
| return (AE_OK); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_disable_all_gpes |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Disable and clear all GPEs in all GPE blocks |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_hw_disable_all_gpes(void) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(hw_disable_all_gpes); |
| |
| status = acpi_ev_walk_gpe_list(acpi_hw_disable_gpe_block, NULL); |
| status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL); |
| return_ACPI_STATUS(status); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_enable_all_runtime_gpes |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_hw_enable_all_runtime_gpes(void) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(hw_enable_all_runtime_gpes); |
| |
| status = acpi_ev_walk_gpe_list(acpi_hw_enable_runtime_gpe_block, NULL); |
| return_ACPI_STATUS(status); |
| } |
| |
| /****************************************************************************** |
| * |
| * FUNCTION: acpi_hw_enable_all_wakeup_gpes |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_hw_enable_all_wakeup_gpes(void) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(hw_enable_all_wakeup_gpes); |
| |
| status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL); |
| return_ACPI_STATUS(status); |
| } |