| /* |
| * WUSB Wire Adapter: WLP interface |
| * Driver for the Linux Network stack. |
| * |
| * Copyright (C) 2005-2006 Intel Corporation |
| * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| * |
| * |
| * FIXME: docs |
| * |
| * Implementation of the netdevice linkage (except tx and rx related stuff). |
| * |
| * ROADMAP: |
| * |
| * ENTRY POINTS (Net device): |
| * |
| * i1480u_open(): Called when we ifconfig up the interface; |
| * associates to a UWB host controller, reserves |
| * bandwidth (MAS), sets up RX USB URB and starts |
| * the queue. |
| * |
| * i1480u_stop(): Called when we ifconfig down a interface; |
| * reverses _open(). |
| * |
| * i1480u_set_config(): |
| */ |
| |
| #include <linux/if_arp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/uwb/debug.h> |
| #include "i1480u-wlp.h" |
| |
| struct i1480u_cmd_set_ip_mas { |
| struct uwb_rccb rccb; |
| struct uwb_dev_addr addr; |
| u8 stream; |
| u8 owner; |
| u8 type; /* enum uwb_drp_type */ |
| u8 baMAS[32]; |
| } __attribute__((packed)); |
| |
| |
| static |
| int i1480u_set_ip_mas( |
| struct uwb_rc *rc, |
| const struct uwb_dev_addr *dstaddr, |
| u8 stream, u8 owner, u8 type, unsigned long *mas) |
| { |
| |
| int result; |
| struct i1480u_cmd_set_ip_mas *cmd; |
| struct uwb_rc_evt_confirm reply; |
| |
| result = -ENOMEM; |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (cmd == NULL) |
| goto error_kzalloc; |
| cmd->rccb.bCommandType = 0xfd; |
| cmd->rccb.wCommand = cpu_to_le16(0x000e); |
| cmd->addr = *dstaddr; |
| cmd->stream = stream; |
| cmd->owner = owner; |
| cmd->type = type; |
| if (mas == NULL) |
| memset(cmd->baMAS, 0x00, sizeof(cmd->baMAS)); |
| else |
| memcpy(cmd->baMAS, mas, sizeof(cmd->baMAS)); |
| reply.rceb.bEventType = 0xfd; |
| reply.rceb.wEvent = cpu_to_le16(0x000e); |
| result = uwb_rc_cmd(rc, "SET-IP-MAS", &cmd->rccb, sizeof(*cmd), |
| &reply.rceb, sizeof(reply)); |
| if (result < 0) |
| goto error_cmd; |
| if (reply.bResultCode != UWB_RC_RES_FAIL) { |
| dev_err(&rc->uwb_dev.dev, |
| "SET-IP-MAS: command execution failed: %d\n", |
| reply.bResultCode); |
| result = -EIO; |
| } |
| error_cmd: |
| kfree(cmd); |
| error_kzalloc: |
| return result; |
| } |
| |
| /* |
| * Inform a WLP interface of a MAS reservation |
| * |
| * @rc is assumed refcnted. |
| */ |
| /* FIXME: detect if remote device is WLP capable? */ |
| static int i1480u_mas_set_dev(struct uwb_dev *uwb_dev, struct uwb_rc *rc, |
| u8 stream, u8 owner, u8 type, unsigned long *mas) |
| { |
| int result = 0; |
| struct device *dev = &rc->uwb_dev.dev; |
| |
| result = i1480u_set_ip_mas(rc, &uwb_dev->dev_addr, stream, owner, |
| type, mas); |
| if (result < 0) { |
| char rcaddrbuf[UWB_ADDR_STRSIZE], devaddrbuf[UWB_ADDR_STRSIZE]; |
| uwb_dev_addr_print(rcaddrbuf, sizeof(rcaddrbuf), |
| &rc->uwb_dev.dev_addr); |
| uwb_dev_addr_print(devaddrbuf, sizeof(devaddrbuf), |
| &uwb_dev->dev_addr); |
| dev_err(dev, "Set IP MAS (%s to %s) failed: %d\n", |
| rcaddrbuf, devaddrbuf, result); |
| } |
| return result; |
| } |
| |
| /** |
| * Called by bandwidth allocator when change occurs in reservation. |
| * |
| * @rsv: The reservation that is being established, modified, or |
| * terminated. |
| * |
| * When a reservation is established, modified, or terminated the upper layer |
| * (WLP here) needs set/update the currently available Media Access Slots |
| * that can be use for IP traffic. |
| * |
| * Our action taken during failure depends on how the reservation is being |
| * changed: |
| * - if reservation is being established we do nothing if we cannot set the |
| * new MAS to be used |
| * - if reservation is being terminated we revert back to PCA whether the |
| * SET IP MAS command succeeds or not. |
| */ |
| void i1480u_bw_alloc_cb(struct uwb_rsv *rsv) |
| { |
| int result = 0; |
| struct i1480u *i1480u = rsv->pal_priv; |
| struct device *dev = &i1480u->usb_iface->dev; |
| struct uwb_dev *target_dev = rsv->target.dev; |
| struct uwb_rc *rc = i1480u->wlp.rc; |
| u8 stream = rsv->stream; |
| int type = rsv->type; |
| int is_owner = rsv->owner == &rc->uwb_dev; |
| unsigned long *bmp = rsv->mas.bm; |
| |
| dev_err(dev, "WLP callback called - sending set ip mas\n"); |
| /*user cannot change options while setting configuration*/ |
| mutex_lock(&i1480u->options.mutex); |
| switch (rsv->state) { |
| case UWB_RSV_STATE_T_ACCEPTED: |
| case UWB_RSV_STATE_O_ESTABLISHED: |
| result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, |
| type, bmp); |
| if (result < 0) { |
| dev_err(dev, "MAS reservation failed: %d\n", result); |
| goto out; |
| } |
| if (is_owner) { |
| wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, |
| WLP_DRP | stream); |
| wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 0); |
| } |
| break; |
| case UWB_RSV_STATE_NONE: |
| /* revert back to PCA */ |
| result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, |
| type, bmp); |
| if (result < 0) |
| dev_err(dev, "MAS reservation failed: %d\n", result); |
| /* Revert to PCA even though SET IP MAS failed. */ |
| wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, |
| i1480u->options.pca_base_priority); |
| wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 1); |
| break; |
| default: |
| dev_err(dev, "unexpected WLP reservation state: %s (%d).\n", |
| uwb_rsv_state_str(rsv->state), rsv->state); |
| break; |
| } |
| out: |
| mutex_unlock(&i1480u->options.mutex); |
| return; |
| } |
| |
| /** |
| * |
| * Called on 'ifconfig up' |
| */ |
| int i1480u_open(struct net_device *net_dev) |
| { |
| int result; |
| struct i1480u *i1480u = netdev_priv(net_dev); |
| struct wlp *wlp = &i1480u->wlp; |
| struct uwb_rc *rc; |
| struct device *dev = &i1480u->usb_iface->dev; |
| |
| rc = wlp->rc; |
| result = i1480u_rx_setup(i1480u); /* Alloc RX stuff */ |
| if (result < 0) |
| goto error_rx_setup; |
| netif_wake_queue(net_dev); |
| #ifdef i1480u_FLOW_CONTROL |
| result = usb_submit_urb(i1480u->notif_urb, GFP_KERNEL);; |
| if (result < 0) { |
| dev_err(dev, "Can't submit notification URB: %d\n", result); |
| goto error_notif_urb_submit; |
| } |
| #endif |
| i1480u->uwb_notifs_handler.cb = i1480u_uwb_notifs_cb; |
| i1480u->uwb_notifs_handler.data = i1480u; |
| if (uwb_bg_joined(rc)) |
| netif_carrier_on(net_dev); |
| else |
| netif_carrier_off(net_dev); |
| uwb_notifs_register(rc, &i1480u->uwb_notifs_handler); |
| /* Interface is up with an address, now we can create WSS */ |
| result = wlp_wss_setup(net_dev, &wlp->wss); |
| if (result < 0) { |
| dev_err(dev, "Can't create WSS: %d. \n", result); |
| goto error_notif_deregister; |
| } |
| return 0; |
| error_notif_deregister: |
| uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler); |
| #ifdef i1480u_FLOW_CONTROL |
| error_notif_urb_submit: |
| #endif |
| netif_stop_queue(net_dev); |
| i1480u_rx_release(i1480u); |
| error_rx_setup: |
| return result; |
| } |
| |
| |
| /** |
| * Called on 'ifconfig down' |
| */ |
| int i1480u_stop(struct net_device *net_dev) |
| { |
| struct i1480u *i1480u = netdev_priv(net_dev); |
| struct wlp *wlp = &i1480u->wlp; |
| struct uwb_rc *rc = wlp->rc; |
| |
| BUG_ON(wlp->rc == NULL); |
| wlp_wss_remove(&wlp->wss); |
| uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler); |
| netif_carrier_off(net_dev); |
| #ifdef i1480u_FLOW_CONTROL |
| usb_kill_urb(i1480u->notif_urb); |
| #endif |
| netif_stop_queue(net_dev); |
| i1480u_rx_release(i1480u); |
| i1480u_tx_release(i1480u); |
| return 0; |
| } |
| |
| |
| /** Report statistics */ |
| struct net_device_stats *i1480u_get_stats(struct net_device *net_dev) |
| { |
| struct i1480u *i1480u = netdev_priv(net_dev); |
| return &i1480u->stats; |
| } |
| |
| |
| /** |
| * |
| * Change the interface config--we probably don't have to do anything. |
| */ |
| int i1480u_set_config(struct net_device *net_dev, struct ifmap *map) |
| { |
| int result; |
| struct i1480u *i1480u = netdev_priv(net_dev); |
| BUG_ON(i1480u->wlp.rc == NULL); |
| result = 0; |
| return result; |
| } |
| |
| /** |
| * Change the MTU of the interface |
| */ |
| int i1480u_change_mtu(struct net_device *net_dev, int mtu) |
| { |
| static union { |
| struct wlp_tx_hdr tx; |
| struct wlp_rx_hdr rx; |
| } i1480u_all_hdrs; |
| |
| if (mtu < ETH_HLEN) /* We encap eth frames */ |
| return -ERANGE; |
| if (mtu > 4000 - sizeof(i1480u_all_hdrs)) |
| return -ERANGE; |
| net_dev->mtu = mtu; |
| return 0; |
| } |
| |
| |
| /** |
| * Callback function to handle events from UWB |
| * When we see other devices we know the carrier is ok, |
| * if we are the only device in the beacon group we set the carrier |
| * state to off. |
| * */ |
| void i1480u_uwb_notifs_cb(void *data, struct uwb_dev *uwb_dev, |
| enum uwb_notifs event) |
| { |
| struct i1480u *i1480u = data; |
| struct net_device *net_dev = i1480u->net_dev; |
| struct device *dev = &i1480u->usb_iface->dev; |
| switch (event) { |
| case UWB_NOTIF_BG_JOIN: |
| netif_carrier_on(net_dev); |
| dev_info(dev, "Link is up\n"); |
| break; |
| case UWB_NOTIF_BG_LEAVE: |
| netif_carrier_off(net_dev); |
| dev_info(dev, "Link is down\n"); |
| break; |
| default: |
| dev_err(dev, "don't know how to handle event %d from uwb\n", |
| event); |
| } |
| } |
| |
| /** |
| * Stop the network queue |
| * |
| * Enable WLP substack to stop network queue. We also set the flow control |
| * threshold at this time to prevent the flow control from restarting the |
| * queue. |
| * |
| * we are loosing the current threshold value here ... FIXME? |
| */ |
| void i1480u_stop_queue(struct wlp *wlp) |
| { |
| struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); |
| struct net_device *net_dev = i1480u->net_dev; |
| i1480u->tx_inflight.threshold = 0; |
| netif_stop_queue(net_dev); |
| } |
| |
| /** |
| * Start the network queue |
| * |
| * Enable WLP substack to start network queue. Also re-enable the flow |
| * control to manage the queue again. |
| * |
| * We re-enable the flow control by storing the default threshold in the |
| * flow control threshold. This means that if the user modified the |
| * threshold before the queue was stopped and restarted that information |
| * will be lost. FIXME? |
| */ |
| void i1480u_start_queue(struct wlp *wlp) |
| { |
| struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); |
| struct net_device *net_dev = i1480u->net_dev; |
| i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; |
| netif_start_queue(net_dev); |
| } |