| /*====================================================================== |
| |
| A PCMCIA token-ring driver for IBM-based cards |
| |
| This driver supports the IBM PCMCIA Token-Ring Card. |
| Written by Steve Kipisz, kipisz@vnet.ibm.com or |
| bungy@ibm.net |
| |
| Written 1995,1996. |
| |
| This code is based on pcnet_cs.c from David Hinds. |
| |
| V2.2.0 February 1999 - Mike Phillips phillim@amtrak.com |
| |
| Linux V2.2.x presented significant changes to the underlying |
| ibmtr.c code. Mainly the code became a lot more organized and |
| modular. |
| |
| This caused the old PCMCIA Token Ring driver to give up and go |
| home early. Instead of just patching the old code to make it |
| work, the PCMCIA code has been streamlined, updated and possibly |
| improved. |
| |
| This code now only contains code required for the Card Services. |
| All we do here is set the card up enough so that the real ibmtr.c |
| driver can find it and work with it properly. |
| |
| i.e. We set up the io port, irq, mmio memory and shared ram |
| memory. This enables ibmtr_probe in ibmtr.c to find the card and |
| configure it as though it was a normal ISA and/or PnP card. |
| |
| CHANGES |
| |
| v2.2.5 April 1999 Mike Phillips (phillim@amtrak.com) |
| Obscure bug fix, required changed to ibmtr.c not ibmtr_cs.c |
| |
| v2.2.7 May 1999 Mike Phillips (phillim@amtrak.com) |
| Updated to version 2.2.7 to match the first version of the kernel |
| that the modification to ibmtr.c were incorporated into. |
| |
| v2.2.17 July 2000 Burt Silverman (burts@us.ibm.com) |
| Address translation feature of PCMCIA controller is usable so |
| memory windows can be placed in High memory (meaning above |
| 0xFFFFF.) |
| |
| ======================================================================*/ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/module.h> |
| #include <linux/ethtool.h> |
| #include <linux/netdevice.h> |
| #include <linux/trdevice.h> |
| #include <linux/ibmtr.h> |
| |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ds.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/system.h> |
| |
| #define PCMCIA |
| #include "../tokenring/ibmtr.c" |
| |
| |
| /*====================================================================*/ |
| |
| /* Parameters that can be set with 'insmod' */ |
| |
| /* MMIO base address */ |
| static u_long mmiobase = 0xce000; |
| |
| /* SRAM base address */ |
| static u_long srambase = 0xd0000; |
| |
| /* SRAM size 8,16,32,64 */ |
| static u_long sramsize = 64; |
| |
| /* Ringspeed 4,16 */ |
| static int ringspeed = 16; |
| |
| module_param(mmiobase, ulong, 0); |
| module_param(srambase, ulong, 0); |
| module_param(sramsize, ulong, 0); |
| module_param(ringspeed, int, 0); |
| MODULE_LICENSE("GPL"); |
| |
| /*====================================================================*/ |
| |
| static int ibmtr_config(struct pcmcia_device *link); |
| static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase); |
| static void ibmtr_release(struct pcmcia_device *link); |
| static void ibmtr_detach(struct pcmcia_device *p_dev); |
| |
| /*====================================================================*/ |
| |
| typedef struct ibmtr_dev_t { |
| struct pcmcia_device *p_dev; |
| struct net_device *dev; |
| struct tok_info *ti; |
| } ibmtr_dev_t; |
| |
| static void netdev_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strcpy(info->driver, "ibmtr_cs"); |
| } |
| |
| static const struct ethtool_ops netdev_ethtool_ops = { |
| .get_drvinfo = netdev_get_drvinfo, |
| }; |
| |
| static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { |
| ibmtr_dev_t *info = dev_id; |
| struct net_device *dev = info->dev; |
| return tok_interrupt(irq, dev); |
| }; |
| |
| static int __devinit ibmtr_attach(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info; |
| struct net_device *dev; |
| |
| dev_dbg(&link->dev, "ibmtr_attach()\n"); |
| |
| /* Create new token-ring device */ |
| info = kzalloc(sizeof(*info), GFP_KERNEL); |
| if (!info) return -ENOMEM; |
| dev = alloc_trdev(sizeof(struct tok_info)); |
| if (!dev) { |
| kfree(info); |
| return -ENOMEM; |
| } |
| |
| info->p_dev = link; |
| link->priv = info; |
| info->ti = netdev_priv(dev); |
| |
| link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; |
| link->resource[0]->end = 4; |
| link->config_flags |= CONF_ENABLE_IRQ; |
| link->config_regs = PRESENT_OPTION; |
| |
| info->dev = dev; |
| |
| SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); |
| |
| return ibmtr_config(link); |
| } /* ibmtr_attach */ |
| |
| static void ibmtr_detach(struct pcmcia_device *link) |
| { |
| struct ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| struct tok_info *ti = netdev_priv(dev); |
| |
| dev_dbg(&link->dev, "ibmtr_detach\n"); |
| |
| /* |
| * When the card removal interrupt hits tok_interrupt(), |
| * bail out early, so we don't crash the machine |
| */ |
| ti->sram_phys |= 1; |
| |
| unregister_netdev(dev); |
| |
| del_timer_sync(&(ti->tr_timer)); |
| |
| ibmtr_release(link); |
| |
| free_netdev(dev); |
| kfree(info); |
| } /* ibmtr_detach */ |
| |
| static int __devinit ibmtr_config(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| struct tok_info *ti = netdev_priv(dev); |
| int i, ret; |
| |
| dev_dbg(&link->dev, "ibmtr_config\n"); |
| |
| link->io_lines = 16; |
| link->config_index = 0x61; |
| |
| /* Determine if this is PRIMARY or ALTERNATE. */ |
| |
| /* Try PRIMARY card at 0xA20-0xA23 */ |
| link->resource[0]->start = 0xA20; |
| i = pcmcia_request_io(link); |
| if (i != 0) { |
| /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */ |
| link->resource[0]->start = 0xA24; |
| ret = pcmcia_request_io(link); |
| if (ret) |
| goto failed; |
| } |
| dev->base_addr = link->resource[0]->start; |
| |
| ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt); |
| if (ret) |
| goto failed; |
| dev->irq = link->irq; |
| ti->irq = link->irq; |
| ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); |
| |
| /* Allocate the MMIO memory window */ |
| link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; |
| link->resource[2]->flags |= WIN_USE_WAIT; |
| link->resource[2]->start = 0; |
| link->resource[2]->end = 0x2000; |
| ret = pcmcia_request_window(link, link->resource[2], 250); |
| if (ret) |
| goto failed; |
| |
| ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase); |
| if (ret) |
| goto failed; |
| ti->mmio = ioremap(link->resource[2]->start, |
| resource_size(link->resource[2])); |
| |
| /* Allocate the SRAM memory window */ |
| link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; |
| link->resource[3]->flags |= WIN_USE_WAIT; |
| link->resource[3]->start = 0; |
| link->resource[3]->end = sramsize * 1024; |
| ret = pcmcia_request_window(link, link->resource[3], 250); |
| if (ret) |
| goto failed; |
| |
| ret = pcmcia_map_mem_page(link, link->resource[3], srambase); |
| if (ret) |
| goto failed; |
| |
| ti->sram_base = srambase >> 12; |
| ti->sram_virt = ioremap(link->resource[3]->start, |
| resource_size(link->resource[3])); |
| ti->sram_phys = link->resource[3]->start; |
| |
| ret = pcmcia_enable_device(link); |
| if (ret) |
| goto failed; |
| |
| /* Set up the Token-Ring Controller Configuration Register and |
| turn on the card. Check the "Local Area Network Credit Card |
| Adapters Technical Reference" SC30-3585 for this info. */ |
| ibmtr_hw_setup(dev, mmiobase); |
| |
| SET_NETDEV_DEV(dev, &link->dev); |
| |
| i = ibmtr_probe_card(dev); |
| if (i != 0) { |
| printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n"); |
| goto failed; |
| } |
| |
| printk(KERN_INFO |
| "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n", |
| dev->name, dev->base_addr, dev->irq, |
| (u_long)ti->mmio, (u_long)(ti->sram_base << 12), |
| dev->dev_addr); |
| return 0; |
| |
| failed: |
| ibmtr_release(link); |
| return -ENODEV; |
| } /* ibmtr_config */ |
| |
| static void ibmtr_release(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| |
| dev_dbg(&link->dev, "ibmtr_release\n"); |
| |
| if (link->resource[2]->end) { |
| struct tok_info *ti = netdev_priv(dev); |
| iounmap(ti->mmio); |
| } |
| pcmcia_disable_device(link); |
| } |
| |
| static int ibmtr_suspend(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| |
| if (link->open) |
| netif_device_detach(dev); |
| |
| return 0; |
| } |
| |
| static int __devinit ibmtr_resume(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| |
| if (link->open) { |
| ibmtr_probe(dev); /* really? */ |
| netif_device_attach(dev); |
| } |
| |
| return 0; |
| } |
| |
| |
| /*====================================================================*/ |
| |
| static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase) |
| { |
| int i; |
| |
| /* Bizarre IBM behavior, there are 16 bits of information we |
| need to set, but the card only allows us to send 4 bits at a |
| time. For each byte sent to base_addr, bits 7-4 tell the |
| card which part of the 16 bits we are setting, bits 3-0 contain |
| the actual information */ |
| |
| /* First nibble provides 4 bits of mmio */ |
| i = (mmiobase >> 16) & 0x0F; |
| outb(i, dev->base_addr); |
| |
| /* Second nibble provides 3 bits of mmio */ |
| i = 0x10 | ((mmiobase >> 12) & 0x0E); |
| outb(i, dev->base_addr); |
| |
| /* Third nibble, hard-coded values */ |
| i = 0x26; |
| outb(i, dev->base_addr); |
| |
| /* Fourth nibble sets shared ram page size */ |
| |
| /* 8 = 00, 16 = 01, 32 = 10, 64 = 11 */ |
| i = (sramsize >> 4) & 0x07; |
| i = ((i == 4) ? 3 : i) << 2; |
| i |= 0x30; |
| |
| if (ringspeed == 16) |
| i |= 2; |
| if (dev->base_addr == 0xA24) |
| i |= 1; |
| outb(i, dev->base_addr); |
| |
| /* 0x40 will release the card for use */ |
| outb(0x40, dev->base_addr); |
| } |
| |
| static struct pcmcia_device_id ibmtr_ids[] = { |
| PCMCIA_DEVICE_PROD_ID12("3Com", "TokenLink Velocity PC Card", 0x41240e5b, 0x82c3734e), |
| PCMCIA_DEVICE_PROD_ID12("IBM", "TOKEN RING", 0xb569a6e5, 0xbf8eed47), |
| PCMCIA_DEVICE_NULL, |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); |
| |
| static struct pcmcia_driver ibmtr_cs_driver = { |
| .owner = THIS_MODULE, |
| .name = "ibmtr_cs", |
| .probe = ibmtr_attach, |
| .remove = ibmtr_detach, |
| .id_table = ibmtr_ids, |
| .suspend = ibmtr_suspend, |
| .resume = ibmtr_resume, |
| }; |
| |
| static int __init init_ibmtr_cs(void) |
| { |
| return pcmcia_register_driver(&ibmtr_cs_driver); |
| } |
| |
| static void __exit exit_ibmtr_cs(void) |
| { |
| pcmcia_unregister_driver(&ibmtr_cs_driver); |
| } |
| |
| module_init(init_ibmtr_cs); |
| module_exit(exit_ibmtr_cs); |