| /* |
| * Copyright (c) 2010 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| /* ****************** SDIO CARD Interface Functions **************************/ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/types.h> |
| #include <linux/netdevice.h> |
| #include <linux/export.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/sched.h> |
| #include <linux/completion.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/card.h> |
| |
| #include <defs.h> |
| #include <brcm_hw_ids.h> |
| #include <brcmu_utils.h> |
| #include <brcmu_wifi.h> |
| #include <soc.h> |
| #include "dhd_bus.h" |
| #include "dhd_dbg.h" |
| #include "sdio_host.h" |
| |
| #define SDIOH_API_ACCESS_RETRY_LIMIT 2 |
| |
| #ifdef CONFIG_BRCMFMAC_SDIO_OOB |
| static irqreturn_t brcmf_sdio_irqhandler(int irq, void *dev_id) |
| { |
| struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(dev_id); |
| |
| brcmf_dbg(INTR, "oob intr triggered\n"); |
| |
| /* |
| * out-of-band interrupt is level-triggered which won't |
| * be cleared until dpc |
| */ |
| if (sdiodev->irq_en) { |
| disable_irq_nosync(irq); |
| sdiodev->irq_en = false; |
| } |
| |
| brcmf_sdbrcm_isr(sdiodev->bus); |
| |
| return IRQ_HANDLED; |
| } |
| |
| int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) |
| { |
| int ret = 0; |
| u8 data; |
| unsigned long flags; |
| |
| brcmf_dbg(TRACE, "Entering\n"); |
| |
| brcmf_dbg(ERROR, "requesting irq %d\n", sdiodev->irq); |
| ret = request_irq(sdiodev->irq, brcmf_sdio_irqhandler, |
| sdiodev->irq_flags, "brcmf_oob_intr", |
| &sdiodev->func[1]->card->dev); |
| if (ret != 0) |
| return ret; |
| spin_lock_init(&sdiodev->irq_en_lock); |
| spin_lock_irqsave(&sdiodev->irq_en_lock, flags); |
| sdiodev->irq_en = true; |
| spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags); |
| |
| ret = enable_irq_wake(sdiodev->irq); |
| if (ret != 0) |
| return ret; |
| sdiodev->irq_wake = true; |
| |
| /* must configure SDIO_CCCR_IENx to enable irq */ |
| data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret); |
| data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; |
| brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); |
| |
| /* redirect, configure and enable io for interrupt signal */ |
| data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; |
| if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH) |
| data |= SDIO_SEPINT_ACT_HI; |
| brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); |
| |
| return 0; |
| } |
| |
| int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) |
| { |
| brcmf_dbg(TRACE, "Entering\n"); |
| |
| brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); |
| brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); |
| |
| if (sdiodev->irq_wake) { |
| disable_irq_wake(sdiodev->irq); |
| sdiodev->irq_wake = false; |
| } |
| free_irq(sdiodev->irq, &sdiodev->func[1]->card->dev); |
| sdiodev->irq_en = false; |
| |
| return 0; |
| } |
| #else /* CONFIG_BRCMFMAC_SDIO_OOB */ |
| static void brcmf_sdio_irqhandler(struct sdio_func *func) |
| { |
| struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(&func->card->dev); |
| |
| brcmf_dbg(INTR, "ib intr triggered\n"); |
| |
| brcmf_sdbrcm_isr(sdiodev->bus); |
| } |
| |
| /* dummy handler for SDIO function 2 interrupt */ |
| static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func) |
| { |
| } |
| |
| int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) |
| { |
| brcmf_dbg(TRACE, "Entering\n"); |
| |
| sdio_claim_host(sdiodev->func[1]); |
| sdio_claim_irq(sdiodev->func[1], brcmf_sdio_irqhandler); |
| sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler); |
| sdio_release_host(sdiodev->func[1]); |
| |
| return 0; |
| } |
| |
| int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) |
| { |
| brcmf_dbg(TRACE, "Entering\n"); |
| |
| sdio_claim_host(sdiodev->func[1]); |
| sdio_release_irq(sdiodev->func[2]); |
| sdio_release_irq(sdiodev->func[1]); |
| sdio_release_host(sdiodev->func[1]); |
| |
| return 0; |
| } |
| #endif /* CONFIG_BRCMFMAC_SDIO_OOB */ |
| |
| int |
| brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) |
| { |
| int err = 0, i; |
| u8 addr[3]; |
| s32 retry; |
| |
| addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK; |
| addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK; |
| addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK; |
| |
| for (i = 0; i < 3; i++) { |
| retry = 0; |
| do { |
| if (retry) |
| usleep_range(1000, 2000); |
| err = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, |
| SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW + i, |
| &addr[i]); |
| } while (err != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); |
| |
| if (err) { |
| brcmf_dbg(ERROR, "failed at addr:0x%0x\n", |
| SBSDIO_FUNC1_SBADDRLOW + i); |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| int |
| brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, |
| void *data, bool write) |
| { |
| u8 func_num, reg_size; |
| u32 bar; |
| s32 retry = 0; |
| int ret; |
| |
| /* |
| * figure out how to read the register based on address range |
| * 0x00 ~ 0x7FF: function 0 CCCR and FBR |
| * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers |
| * The rest: function 1 silicon backplane core registers |
| */ |
| if ((addr & ~REG_F0_REG_MASK) == 0) { |
| func_num = SDIO_FUNC_0; |
| reg_size = 1; |
| } else if ((addr & ~REG_F1_MISC_MASK) == 0) { |
| func_num = SDIO_FUNC_1; |
| reg_size = 1; |
| } else { |
| func_num = SDIO_FUNC_1; |
| reg_size = 4; |
| |
| /* Set the window for SB core register */ |
| bar = addr & ~SBSDIO_SB_OFT_ADDR_MASK; |
| if (bar != sdiodev->sbwad) { |
| ret = brcmf_sdcard_set_sbaddr_window(sdiodev, bar); |
| if (ret != 0) { |
| memset(data, 0xFF, reg_size); |
| return ret; |
| } |
| sdiodev->sbwad = bar; |
| } |
| addr &= SBSDIO_SB_OFT_ADDR_MASK; |
| addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; |
| } |
| |
| do { |
| if (!write) |
| memset(data, 0, reg_size); |
| if (retry) /* wait for 1 ms till bus get settled down */ |
| usleep_range(1000, 2000); |
| if (reg_size == 1) |
| ret = brcmf_sdioh_request_byte(sdiodev, write, |
| func_num, addr, data); |
| else |
| ret = brcmf_sdioh_request_word(sdiodev, write, |
| func_num, addr, data, 4); |
| } while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); |
| |
| if (ret != 0) |
| brcmf_dbg(ERROR, "failed with %d\n", ret); |
| |
| return ret; |
| } |
| |
| u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) |
| { |
| u8 data; |
| int retval; |
| |
| brcmf_dbg(INFO, "addr:0x%08x\n", addr); |
| sdio_claim_host(sdiodev->func[1]); |
| retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false); |
| sdio_release_host(sdiodev->func[1]); |
| brcmf_dbg(INFO, "data:0x%02x\n", data); |
| |
| if (ret) |
| *ret = retval; |
| |
| return data; |
| } |
| |
| u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) |
| { |
| u32 data; |
| int retval; |
| |
| brcmf_dbg(INFO, "addr:0x%08x\n", addr); |
| sdio_claim_host(sdiodev->func[1]); |
| retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false); |
| sdio_release_host(sdiodev->func[1]); |
| brcmf_dbg(INFO, "data:0x%08x\n", data); |
| |
| if (ret) |
| *ret = retval; |
| |
| return data; |
| } |
| |
| void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, |
| u8 data, int *ret) |
| { |
| int retval; |
| |
| brcmf_dbg(INFO, "addr:0x%08x, data:0x%02x\n", addr, data); |
| sdio_claim_host(sdiodev->func[1]); |
| retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true); |
| sdio_release_host(sdiodev->func[1]); |
| |
| if (ret) |
| *ret = retval; |
| } |
| |
| void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, |
| u32 data, int *ret) |
| { |
| int retval; |
| |
| brcmf_dbg(INFO, "addr:0x%08x, data:0x%08x\n", addr, data); |
| sdio_claim_host(sdiodev->func[1]); |
| retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true); |
| sdio_release_host(sdiodev->func[1]); |
| |
| if (ret) |
| *ret = retval; |
| } |
| |
| static int brcmf_sdcard_recv_prepare(struct brcmf_sdio_dev *sdiodev, uint fn, |
| uint flags, uint width, u32 *addr) |
| { |
| uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK; |
| int err = 0; |
| |
| /* Async not implemented yet */ |
| if (flags & SDIO_REQ_ASYNC) |
| return -ENOTSUPP; |
| |
| if (bar0 != sdiodev->sbwad) { |
| err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0); |
| if (err) |
| return err; |
| |
| sdiodev->sbwad = bar0; |
| } |
| |
| *addr &= SBSDIO_SB_OFT_ADDR_MASK; |
| |
| if (width == 4) |
| *addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; |
| |
| return 0; |
| } |
| |
| int |
| brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, |
| uint flags, u8 *buf, uint nbytes) |
| { |
| struct sk_buff *mypkt; |
| int err; |
| |
| mypkt = brcmu_pkt_buf_get_skb(nbytes); |
| if (!mypkt) { |
| brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n", |
| nbytes); |
| return -EIO; |
| } |
| |
| err = brcmf_sdcard_recv_pkt(sdiodev, addr, fn, flags, mypkt); |
| if (!err) |
| memcpy(buf, mypkt->data, nbytes); |
| |
| brcmu_pkt_buf_free_skb(mypkt); |
| return err; |
| } |
| |
| int |
| brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, |
| uint flags, struct sk_buff *pkt) |
| { |
| uint incr_fix; |
| uint width; |
| int err = 0; |
| |
| brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n", |
| fn, addr, pkt->len); |
| |
| sdio_claim_host(sdiodev->func[1]); |
| |
| width = (flags & SDIO_REQ_4BYTE) ? 4 : 2; |
| err = brcmf_sdcard_recv_prepare(sdiodev, fn, flags, width, &addr); |
| if (err) |
| goto done; |
| |
| incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC; |
| err = brcmf_sdioh_request_buffer(sdiodev, incr_fix, SDIOH_READ, |
| fn, addr, pkt); |
| |
| done: |
| sdio_release_host(sdiodev->func[1]); |
| |
| return err; |
| } |
| |
| int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, |
| uint flags, struct sk_buff_head *pktq) |
| { |
| uint incr_fix; |
| uint width; |
| int err = 0; |
| |
| brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n", |
| fn, addr, pktq->qlen); |
| |
| sdio_claim_host(sdiodev->func[1]); |
| |
| width = (flags & SDIO_REQ_4BYTE) ? 4 : 2; |
| err = brcmf_sdcard_recv_prepare(sdiodev, fn, flags, width, &addr); |
| if (err) |
| goto done; |
| |
| incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC; |
| err = brcmf_sdioh_request_chain(sdiodev, incr_fix, SDIOH_READ, fn, addr, |
| pktq); |
| |
| done: |
| sdio_release_host(sdiodev->func[1]); |
| |
| return err; |
| } |
| |
| int |
| brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, |
| uint flags, u8 *buf, uint nbytes) |
| { |
| struct sk_buff *mypkt; |
| int err; |
| |
| mypkt = brcmu_pkt_buf_get_skb(nbytes); |
| if (!mypkt) { |
| brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n", |
| nbytes); |
| return -EIO; |
| } |
| |
| memcpy(mypkt->data, buf, nbytes); |
| err = brcmf_sdcard_send_pkt(sdiodev, addr, fn, flags, mypkt); |
| |
| brcmu_pkt_buf_free_skb(mypkt); |
| return err; |
| |
| } |
| |
| int |
| brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, |
| uint flags, struct sk_buff *pkt) |
| { |
| uint incr_fix; |
| uint width; |
| uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK; |
| int err = 0; |
| |
| brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n", |
| fn, addr, pkt->len); |
| |
| /* Async not implemented yet */ |
| if (flags & SDIO_REQ_ASYNC) |
| return -ENOTSUPP; |
| |
| sdio_claim_host(sdiodev->func[1]); |
| |
| if (bar0 != sdiodev->sbwad) { |
| err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0); |
| if (err) |
| goto done; |
| |
| sdiodev->sbwad = bar0; |
| } |
| |
| addr &= SBSDIO_SB_OFT_ADDR_MASK; |
| |
| incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC; |
| width = (flags & SDIO_REQ_4BYTE) ? 4 : 2; |
| if (width == 4) |
| addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; |
| |
| err = brcmf_sdioh_request_buffer(sdiodev, incr_fix, SDIOH_WRITE, fn, |
| addr, pkt); |
| |
| done: |
| sdio_release_host(sdiodev->func[1]); |
| |
| return err; |
| } |
| |
| int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw, u32 addr, |
| u8 *buf, uint nbytes) |
| { |
| struct sk_buff *mypkt; |
| bool write = rw ? SDIOH_WRITE : SDIOH_READ; |
| int err; |
| |
| addr &= SBSDIO_SB_OFT_ADDR_MASK; |
| addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; |
| |
| mypkt = brcmu_pkt_buf_get_skb(nbytes); |
| if (!mypkt) { |
| brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n", |
| nbytes); |
| return -EIO; |
| } |
| |
| /* For a write, copy the buffer data into the packet. */ |
| if (write) |
| memcpy(mypkt->data, buf, nbytes); |
| |
| err = brcmf_sdioh_request_buffer(sdiodev, SDIOH_DATA_INC, write, |
| SDIO_FUNC_1, addr, mypkt); |
| |
| /* For a read, copy the packet data back to the buffer. */ |
| if (!err && !write) |
| memcpy(buf, mypkt->data, nbytes); |
| |
| brcmu_pkt_buf_free_skb(mypkt); |
| return err; |
| } |
| |
| int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn) |
| { |
| char t_func = (char)fn; |
| brcmf_dbg(TRACE, "Enter\n"); |
| |
| /* issue abort cmd52 command through F0 */ |
| sdio_claim_host(sdiodev->func[1]); |
| brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, SDIO_FUNC_0, |
| SDIO_CCCR_ABORT, &t_func); |
| sdio_release_host(sdiodev->func[1]); |
| |
| brcmf_dbg(TRACE, "Exit\n"); |
| return 0; |
| } |
| |
| int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) |
| { |
| u32 regs = 0; |
| int ret = 0; |
| |
| ret = brcmf_sdioh_attach(sdiodev); |
| if (ret) |
| goto out; |
| |
| regs = SI_ENUM_BASE; |
| |
| /* Report the BAR, to fix if needed */ |
| sdiodev->sbwad = SI_ENUM_BASE; |
| |
| /* try to attach to the target device */ |
| sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev); |
| if (!sdiodev->bus) { |
| brcmf_dbg(ERROR, "device attach failed\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| out: |
| if (ret) |
| brcmf_sdio_remove(sdiodev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(brcmf_sdio_probe); |
| |
| int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev) |
| { |
| if (sdiodev->bus) { |
| brcmf_sdbrcm_disconnect(sdiodev->bus); |
| sdiodev->bus = NULL; |
| } |
| |
| brcmf_sdioh_detach(sdiodev); |
| |
| sdiodev->sbwad = 0; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(brcmf_sdio_remove); |
| |
| void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable) |
| { |
| if (enable) |
| brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS); |
| else |
| brcmf_sdbrcm_wd_timer(sdiodev->bus, 0); |
| } |