| /* |
| * Support PCI/PCIe on PowerNV platforms |
| * |
| * Currently supports only P5IOC2 |
| * |
| * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/bootmem.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/msi.h> |
| |
| #include <asm/sections.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/msi_bitmap.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/opal.h> |
| #include <asm/iommu.h> |
| #include <asm/tce.h> |
| |
| #include "powernv.h" |
| #include "pci.h" |
| |
| /* For now, use a fixed amount of TCE memory for each p5ioc2 |
| * hub, 16M will do |
| */ |
| #define P5IOC2_TCE_MEMORY 0x01000000 |
| |
| #ifdef CONFIG_PCI_MSI |
| static int pnv_pci_p5ioc2_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, |
| unsigned int hwirq, unsigned int virq, |
| unsigned int is_64, struct msi_msg *msg) |
| { |
| if (WARN_ON(!is_64)) |
| return -ENXIO; |
| msg->data = hwirq - phb->msi_base; |
| msg->address_hi = 0x10000000; |
| msg->address_lo = 0; |
| |
| return 0; |
| } |
| |
| static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) |
| { |
| unsigned int count; |
| const __be32 *prop = of_get_property(phb->hose->dn, |
| "ibm,opal-msi-ranges", NULL); |
| if (!prop) |
| return; |
| |
| /* Don't do MSI's on p5ioc2 PCI-X are they are not properly |
| * verified in HW |
| */ |
| if (of_device_is_compatible(phb->hose->dn, "ibm,p5ioc2-pcix")) |
| return; |
| phb->msi_base = be32_to_cpup(prop); |
| count = be32_to_cpup(prop + 1); |
| if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) { |
| pr_err("PCI %d: Failed to allocate MSI bitmap !\n", |
| phb->hose->global_number); |
| return; |
| } |
| phb->msi_setup = pnv_pci_p5ioc2_msi_setup; |
| phb->msi32_support = 0; |
| pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n", |
| count, phb->msi_base); |
| } |
| #else |
| static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) { } |
| #endif /* CONFIG_PCI_MSI */ |
| |
| static void pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb, |
| struct pci_dev *pdev) |
| { |
| if (phb->p5ioc2.iommu_table.it_map == NULL) { |
| iommu_init_table(&phb->p5ioc2.iommu_table, phb->hose->node); |
| iommu_register_group(&phb->p5ioc2.iommu_table, |
| pci_domain_nr(phb->hose->bus), phb->opal_id); |
| } |
| |
| set_iommu_table_base_and_group(&pdev->dev, &phb->p5ioc2.iommu_table); |
| } |
| |
| static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id, |
| void *tce_mem, u64 tce_size) |
| { |
| struct pnv_phb *phb; |
| const __be64 *prop64; |
| u64 phb_id; |
| int64_t rc; |
| static int primary = 1; |
| |
| pr_info(" Initializing p5ioc2 PHB %s\n", np->full_name); |
| |
| prop64 = of_get_property(np, "ibm,opal-phbid", NULL); |
| if (!prop64) { |
| pr_err(" Missing \"ibm,opal-phbid\" property !\n"); |
| return; |
| } |
| phb_id = be64_to_cpup(prop64); |
| pr_devel(" PHB-ID : 0x%016llx\n", phb_id); |
| pr_devel(" TCE AT : 0x%016lx\n", __pa(tce_mem)); |
| pr_devel(" TCE SZ : 0x%016llx\n", tce_size); |
| |
| rc = opal_pci_set_phb_tce_memory(phb_id, __pa(tce_mem), tce_size); |
| if (rc != OPAL_SUCCESS) { |
| pr_err(" Failed to set TCE memory, OPAL error %lld\n", rc); |
| return; |
| } |
| |
| phb = memblock_virt_alloc(sizeof(struct pnv_phb), 0); |
| phb->hose = pcibios_alloc_controller(np); |
| if (!phb->hose) { |
| pr_err(" Failed to allocate PCI controller\n"); |
| return; |
| } |
| |
| spin_lock_init(&phb->lock); |
| phb->hose->first_busno = 0; |
| phb->hose->last_busno = 0xff; |
| phb->hose->private_data = phb; |
| phb->hose->controller_ops = pnv_pci_controller_ops; |
| phb->hub_id = hub_id; |
| phb->opal_id = phb_id; |
| phb->type = PNV_PHB_P5IOC2; |
| phb->model = PNV_PHB_MODEL_P5IOC2; |
| |
| phb->regs = of_iomap(np, 0); |
| |
| if (phb->regs == NULL) |
| pr_err(" Failed to map registers !\n"); |
| else { |
| pr_devel(" P_BUID = 0x%08x\n", in_be32(phb->regs + 0x100)); |
| pr_devel(" P_IOSZ = 0x%08x\n", in_be32(phb->regs + 0x1b0)); |
| pr_devel(" P_IO_ST = 0x%08x\n", in_be32(phb->regs + 0x1e0)); |
| pr_devel(" P_MEM1_H = 0x%08x\n", in_be32(phb->regs + 0x1a0)); |
| pr_devel(" P_MEM1_L = 0x%08x\n", in_be32(phb->regs + 0x190)); |
| pr_devel(" P_MSZ1_L = 0x%08x\n", in_be32(phb->regs + 0x1c0)); |
| pr_devel(" P_MEM_ST = 0x%08x\n", in_be32(phb->regs + 0x1d0)); |
| pr_devel(" P_MEM2_H = 0x%08x\n", in_be32(phb->regs + 0x2c0)); |
| pr_devel(" P_MEM2_L = 0x%08x\n", in_be32(phb->regs + 0x2b0)); |
| pr_devel(" P_MSZ2_H = 0x%08x\n", in_be32(phb->regs + 0x2d0)); |
| pr_devel(" P_MSZ2_L = 0x%08x\n", in_be32(phb->regs + 0x2e0)); |
| } |
| |
| /* Interpret the "ranges" property */ |
| /* This also maps the I/O region and sets isa_io/mem_base */ |
| pci_process_bridge_OF_ranges(phb->hose, np, primary); |
| primary = 0; |
| |
| phb->hose->ops = &pnv_pci_ops; |
| |
| /* Setup MSI support */ |
| pnv_pci_init_p5ioc2_msis(phb); |
| |
| /* Setup TCEs */ |
| phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup; |
| pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table, |
| tce_mem, tce_size, 0, |
| IOMMU_PAGE_SHIFT_4K); |
| } |
| |
| void __init pnv_pci_init_p5ioc2_hub(struct device_node *np) |
| { |
| struct device_node *phbn; |
| const __be64 *prop64; |
| u64 hub_id; |
| void *tce_mem; |
| uint64_t tce_per_phb; |
| int64_t rc; |
| int phb_count = 0; |
| |
| pr_info("Probing p5ioc2 IO-Hub %s\n", np->full_name); |
| |
| prop64 = of_get_property(np, "ibm,opal-hubid", NULL); |
| if (!prop64) { |
| pr_err(" Missing \"ibm,opal-hubid\" property !\n"); |
| return; |
| } |
| hub_id = be64_to_cpup(prop64); |
| pr_info(" HUB-ID : 0x%016llx\n", hub_id); |
| |
| /* Count child PHBs and calculate TCE space per PHB */ |
| for_each_child_of_node(np, phbn) { |
| if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") || |
| of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) |
| phb_count++; |
| } |
| |
| if (phb_count <= 0) { |
| pr_info(" No PHBs for Hub %s\n", np->full_name); |
| return; |
| } |
| |
| tce_per_phb = __rounddown_pow_of_two(P5IOC2_TCE_MEMORY / phb_count); |
| pr_info(" Allocating %lld MB of TCE memory per PHB\n", |
| tce_per_phb >> 20); |
| |
| /* Currently allocate 16M of TCE memory for every Hub |
| * |
| * XXX TODO: Make it chip local if possible |
| */ |
| tce_mem = memblock_virt_alloc(P5IOC2_TCE_MEMORY, P5IOC2_TCE_MEMORY); |
| pr_debug(" TCE : 0x%016lx..0x%016lx\n", |
| __pa(tce_mem), __pa(tce_mem) + P5IOC2_TCE_MEMORY - 1); |
| rc = opal_pci_set_hub_tce_memory(hub_id, __pa(tce_mem), |
| P5IOC2_TCE_MEMORY); |
| if (rc != OPAL_SUCCESS) { |
| pr_err(" Failed to allocate TCE memory, OPAL error %lld\n", rc); |
| return; |
| } |
| |
| /* Initialize PHBs */ |
| for_each_child_of_node(np, phbn) { |
| if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") || |
| of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) { |
| pnv_pci_init_p5ioc2_phb(phbn, hub_id, |
| tce_mem, tce_per_phb); |
| tce_mem += tce_per_phb; |
| } |
| } |
| } |