| /* |
| * linux/arch/arm/mach-pxa/irq.c |
| * |
| * Generic PXA IRQ handling, GPIO IRQ demultiplexing, etc. |
| * |
| * Author: Nicolas Pitre |
| * Created: Jun 15, 2001 |
| * Copyright: MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/mach/irq.h> |
| #include <asm/arch/pxa-regs.h> |
| |
| #include "generic.h" |
| |
| |
| /* |
| * This is for peripheral IRQs internal to the PXA chip. |
| */ |
| |
| static void pxa_mask_low_irq(unsigned int irq) |
| { |
| ICMR &= ~(1 << irq); |
| } |
| |
| static void pxa_unmask_low_irq(unsigned int irq) |
| { |
| ICMR |= (1 << irq); |
| } |
| |
| static struct irq_chip pxa_internal_chip_low = { |
| .name = "SC", |
| .ack = pxa_mask_low_irq, |
| .mask = pxa_mask_low_irq, |
| .unmask = pxa_unmask_low_irq, |
| }; |
| |
| void __init pxa_init_irq_low(void) |
| { |
| int irq; |
| |
| /* disable all IRQs */ |
| ICMR = 0; |
| |
| /* all IRQs are IRQ, not FIQ */ |
| ICLR = 0; |
| |
| /* only unmasked interrupts kick us out of idle */ |
| ICCR = 1; |
| |
| for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) { |
| set_irq_chip(irq, &pxa_internal_chip_low); |
| set_irq_handler(irq, handle_level_irq); |
| set_irq_flags(irq, IRQF_VALID); |
| } |
| } |
| |
| #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) |
| |
| /* |
| * This is for the second set of internal IRQs as found on the PXA27x. |
| */ |
| |
| static void pxa_mask_high_irq(unsigned int irq) |
| { |
| ICMR2 &= ~(1 << (irq - 32)); |
| } |
| |
| static void pxa_unmask_high_irq(unsigned int irq) |
| { |
| ICMR2 |= (1 << (irq - 32)); |
| } |
| |
| static struct irq_chip pxa_internal_chip_high = { |
| .name = "SC-hi", |
| .ack = pxa_mask_high_irq, |
| .mask = pxa_mask_high_irq, |
| .unmask = pxa_unmask_high_irq, |
| }; |
| |
| void __init pxa_init_irq_high(void) |
| { |
| int irq; |
| |
| ICMR2 = 0; |
| ICLR2 = 0; |
| |
| for (irq = PXA_IRQ(32); irq < PXA_IRQ(64); irq++) { |
| set_irq_chip(irq, &pxa_internal_chip_high); |
| set_irq_handler(irq, handle_level_irq); |
| set_irq_flags(irq, IRQF_VALID); |
| } |
| } |
| #endif |
| |
| /* |
| * PXA GPIO edge detection for IRQs: |
| * IRQs are generated on Falling-Edge, Rising-Edge, or both. |
| * Use this instead of directly setting GRER/GFER. |
| */ |
| |
| static long GPIO_IRQ_rising_edge[4]; |
| static long GPIO_IRQ_falling_edge[4]; |
| static long GPIO_IRQ_mask[4]; |
| |
| static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) |
| { |
| int gpio, idx; |
| |
| gpio = IRQ_TO_GPIO(irq); |
| idx = gpio >> 5; |
| |
| if (type == IRQT_PROBE) { |
| /* Don't mess with enabled GPIOs using preconfigured edges or |
| GPIOs set to alternate function or to output during probe */ |
| if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx] | GPDR(gpio)) & |
| GPIO_bit(gpio)) |
| return 0; |
| if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) |
| return 0; |
| type = __IRQT_RISEDGE | __IRQT_FALEDGE; |
| } |
| |
| /* printk(KERN_DEBUG "IRQ%d (GPIO%d): ", irq, gpio); */ |
| |
| pxa_gpio_mode(gpio | GPIO_IN); |
| |
| if (type & __IRQT_RISEDGE) { |
| /* printk("rising "); */ |
| __set_bit (gpio, GPIO_IRQ_rising_edge); |
| } else { |
| __clear_bit (gpio, GPIO_IRQ_rising_edge); |
| } |
| |
| if (type & __IRQT_FALEDGE) { |
| /* printk("falling "); */ |
| __set_bit (gpio, GPIO_IRQ_falling_edge); |
| } else { |
| __clear_bit (gpio, GPIO_IRQ_falling_edge); |
| } |
| |
| /* printk("edges\n"); */ |
| |
| GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; |
| GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; |
| return 0; |
| } |
| |
| /* |
| * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1. |
| */ |
| |
| static void pxa_ack_low_gpio(unsigned int irq) |
| { |
| GEDR0 = (1 << (irq - IRQ_GPIO0)); |
| } |
| |
| static struct irq_chip pxa_low_gpio_chip = { |
| .name = "GPIO-l", |
| .ack = pxa_ack_low_gpio, |
| .mask = pxa_mask_low_irq, |
| .unmask = pxa_unmask_low_irq, |
| .set_type = pxa_gpio_irq_type, |
| }; |
| |
| /* |
| * Demux handler for GPIO>=2 edge detect interrupts |
| */ |
| |
| static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| unsigned int mask; |
| int loop; |
| |
| do { |
| loop = 0; |
| |
| mask = GEDR0 & GPIO_IRQ_mask[0] & ~3; |
| if (mask) { |
| GEDR0 = mask; |
| irq = IRQ_GPIO(2); |
| desc = irq_desc + irq; |
| mask >>= 2; |
| do { |
| if (mask & 1) |
| desc_handle_irq(irq, desc); |
| irq++; |
| desc++; |
| mask >>= 1; |
| } while (mask); |
| loop = 1; |
| } |
| |
| mask = GEDR1 & GPIO_IRQ_mask[1]; |
| if (mask) { |
| GEDR1 = mask; |
| irq = IRQ_GPIO(32); |
| desc = irq_desc + irq; |
| do { |
| if (mask & 1) |
| desc_handle_irq(irq, desc); |
| irq++; |
| desc++; |
| mask >>= 1; |
| } while (mask); |
| loop = 1; |
| } |
| |
| mask = GEDR2 & GPIO_IRQ_mask[2]; |
| if (mask) { |
| GEDR2 = mask; |
| irq = IRQ_GPIO(64); |
| desc = irq_desc + irq; |
| do { |
| if (mask & 1) |
| desc_handle_irq(irq, desc); |
| irq++; |
| desc++; |
| mask >>= 1; |
| } while (mask); |
| loop = 1; |
| } |
| |
| mask = GEDR3 & GPIO_IRQ_mask[3]; |
| if (mask) { |
| GEDR3 = mask; |
| irq = IRQ_GPIO(96); |
| desc = irq_desc + irq; |
| do { |
| if (mask & 1) |
| desc_handle_irq(irq, desc); |
| irq++; |
| desc++; |
| mask >>= 1; |
| } while (mask); |
| loop = 1; |
| } |
| } while (loop); |
| } |
| |
| static void pxa_ack_muxed_gpio(unsigned int irq) |
| { |
| int gpio = irq - IRQ_GPIO(2) + 2; |
| GEDR(gpio) = GPIO_bit(gpio); |
| } |
| |
| static void pxa_mask_muxed_gpio(unsigned int irq) |
| { |
| int gpio = irq - IRQ_GPIO(2) + 2; |
| __clear_bit(gpio, GPIO_IRQ_mask); |
| GRER(gpio) &= ~GPIO_bit(gpio); |
| GFER(gpio) &= ~GPIO_bit(gpio); |
| } |
| |
| static void pxa_unmask_muxed_gpio(unsigned int irq) |
| { |
| int gpio = irq - IRQ_GPIO(2) + 2; |
| int idx = gpio >> 5; |
| __set_bit(gpio, GPIO_IRQ_mask); |
| GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; |
| GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; |
| } |
| |
| static struct irq_chip pxa_muxed_gpio_chip = { |
| .name = "GPIO", |
| .ack = pxa_ack_muxed_gpio, |
| .mask = pxa_mask_muxed_gpio, |
| .unmask = pxa_unmask_muxed_gpio, |
| .set_type = pxa_gpio_irq_type, |
| }; |
| |
| void __init pxa_init_irq_gpio(int gpio_nr) |
| { |
| int irq, i; |
| |
| pxa_last_gpio = gpio_nr - 1; |
| |
| /* clear all GPIO edge detects */ |
| for (i = 0; i < gpio_nr; i += 32) { |
| GFER(i) = 0; |
| GRER(i) = 0; |
| GEDR(i) = GEDR(i); |
| } |
| |
| /* GPIO 0 and 1 must have their mask bit always set */ |
| GPIO_IRQ_mask[0] = 3; |
| |
| for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { |
| set_irq_chip(irq, &pxa_low_gpio_chip); |
| set_irq_handler(irq, handle_edge_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| } |
| |
| for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) { |
| set_irq_chip(irq, &pxa_muxed_gpio_chip); |
| set_irq_handler(irq, handle_edge_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| } |
| |
| /* Install handler for GPIO>=2 edge detect interrupts */ |
| set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low); |
| set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); |
| } |
| |
| void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)) |
| { |
| pxa_internal_chip_low.set_wake = set_wake; |
| #ifdef CONFIG_PXA27x |
| pxa_internal_chip_high.set_wake = set_wake; |
| #endif |
| pxa_low_gpio_chip.set_wake = set_wake; |
| pxa_muxed_gpio_chip.set_wake = set_wake; |
| } |