| /* |
| * MPC8568E MDS Device Tree Source |
| * |
| * Copyright 2007, 2008 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "MPC8568EMDS"; |
| compatible = "MPC8568EMDS", "MPC85xxMDS"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| ethernet2 = &enet2; |
| ethernet3 = &enet3; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8568@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| d-cache-line-size = <32>; // 32 bytes |
| i-cache-line-size = <32>; // 32 bytes |
| d-cache-size = <0x8000>; // L1, 32K |
| i-cache-size = <0x8000>; // L1, 32K |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x10000000>; |
| }; |
| |
| bcsr@f8000000 { |
| device_type = "board-control"; |
| reg = <0xf8000000 0x8000>; |
| }; |
| |
| soc8568@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| ranges = <0x0 0xe0000000 0x100000>; |
| reg = <0xe0000000 0x1000>; |
| bus-frequency = <0>; |
| |
| memory-controller@2000 { |
| compatible = "fsl,8568-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <18 2>; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,8568-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; // 32 bytes |
| cache-size = <0x80000>; // L2, 512K |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| |
| rtc@68 { |
| compatible = "dallas,ds1374"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8568-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8568-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8568-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8568-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| mdio@24520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x24520 0x20>; |
| |
| phy0: ethernet-phy@7 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1>; |
| reg = <0x7>; |
| device_type = "ethernet-phy"; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1>; |
| reg = <0x1>; |
| device_type = "ethernet-phy"; |
| }; |
| phy2: ethernet-phy@2 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1>; |
| reg = <0x2>; |
| device_type = "ethernet-phy"; |
| }; |
| phy3: ethernet-phy@3 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1>; |
| reg = <0x3>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| enet0: ethernet@24000 { |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <29 2 30 2 34 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy2>; |
| }; |
| |
| enet1: ethernet@25000 { |
| cell-index = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x25000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <35 2 36 2 40 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy3>; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities block |
| compatible = "fsl,mpc8548-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| crypto@30000 { |
| device_type = "crypto"; |
| model = "SEC2"; |
| compatible = "talitos"; |
| reg = <0x30000 0xf000>; |
| interrupts = <45 2>; |
| interrupt-parent = <&mpic>; |
| num-channels = <4>; |
| channel-fifo-len = <24>; |
| exec-units-mask = <0xfe>; |
| descriptor-types-mask = <0x12b0ebf>; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| |
| par_io@e0100 { |
| reg = <0xe0100 0x100>; |
| device_type = "par_io"; |
| num-ports = <7>; |
| |
| pio1: ucc_pin@01 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ |
| 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ |
| 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ |
| 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ |
| 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ |
| 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ |
| 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ |
| 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ |
| 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ |
| 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ |
| 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ |
| 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ |
| 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ |
| 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ |
| 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ |
| 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ |
| 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ |
| 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ |
| 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ |
| 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ |
| 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ |
| 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ |
| 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */ |
| }; |
| |
| pio2: ucc_pin@02 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ |
| 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ |
| 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ |
| 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ |
| 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ |
| 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ |
| 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ |
| 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ |
| 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ |
| 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ |
| 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ |
| 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ |
| 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ |
| 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ |
| 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ |
| 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ |
| 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ |
| 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ |
| 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ |
| 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ |
| 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ |
| 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ |
| 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */ |
| 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */ |
| 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */ |
| }; |
| }; |
| }; |
| |
| qe@e0080000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "qe"; |
| compatible = "fsl,qe"; |
| ranges = <0x0 0xe0080000 0x40000>; |
| reg = <0xe0080000 0x480>; |
| brg-frequency = <0>; |
| bus-frequency = <396000000>; |
| |
| muram@10000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,qe-muram", "fsl,cpm-muram"; |
| ranges = <0x0 0x10000 0x10000>; |
| |
| data-only@0 { |
| compatible = "fsl,qe-muram-data", |
| "fsl,cpm-muram-data"; |
| reg = <0x0 0x10000>; |
| }; |
| }; |
| |
| spi@4c0 { |
| cell-index = <0>; |
| compatible = "fsl,spi"; |
| reg = <0x4c0 0x40>; |
| interrupts = <2>; |
| interrupt-parent = <&qeic>; |
| mode = "cpu"; |
| }; |
| |
| spi@500 { |
| cell-index = <1>; |
| compatible = "fsl,spi"; |
| reg = <0x500 0x40>; |
| interrupts = <1>; |
| interrupt-parent = <&qeic>; |
| mode = "cpu"; |
| }; |
| |
| enet2: ucc@2000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <1>; |
| reg = <0x2000 0x200>; |
| interrupts = <32>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| pio-handle = <&pio1>; |
| phy-handle = <&phy0>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| enet3: ucc@3000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <2>; |
| reg = <0x3000 0x200>; |
| interrupts = <33>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| pio-handle = <&pio2>; |
| phy-handle = <&phy1>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| mdio@2120 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2120 0x18>; |
| compatible = "fsl,ucc-mdio"; |
| |
| /* These are the same PHYs as on |
| * gianfar's MDIO bus */ |
| qe_phy0: ethernet-phy@07 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1>; |
| reg = <0x7>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy1: ethernet-phy@01 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1>; |
| reg = <0x1>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy2: ethernet-phy@02 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1>; |
| reg = <0x2>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy3: ethernet-phy@03 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1>; |
| reg = <0x3>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| qeic: interrupt-controller@80 { |
| interrupt-controller; |
| compatible = "fsl,qe-ic"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| reg = <0x80 0x80>; |
| big-endian; |
| interrupts = <46 2 46 2>; //high:30 low:30 |
| interrupt-parent = <&mpic>; |
| }; |
| |
| }; |
| |
| pci0: pci@e0008000 { |
| cell-index = <0>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x12 AD18 */ |
| 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 |
| 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 |
| 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 |
| 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 |
| |
| /* IDSEL 0x13 AD19 */ |
| 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 |
| 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 |
| 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 |
| 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <24 2>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 |
| 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; |
| clock-frequency = <66666666>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe0008000 0x1000>; |
| compatible = "fsl,mpc8540-pci"; |
| device_type = "pci"; |
| }; |
| |
| /* PCI Express */ |
| pci1: pcie@e000a000 { |
| cell-index = <2>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x0 (PEX) */ |
| 00000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 00000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 00000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <26 2>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 |
| 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; |
| clock-frequency = <33333333>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe000a000 0x1000>; |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x10000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x800000>; |
| }; |
| }; |
| }; |