| /* |
| * ddbridge-regs.h: Digital Devices PCIe bridge driver |
| * |
| * Copyright (C) 2010-2011 Digital Devices GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 only, as published by the Free Software Foundation. |
| * |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * To obtain the license, point your browser to |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /* DD-DVBBridgeV1.h 273 2010-09-17 05:03:16Z manfred */ |
| |
| /* Register Definitions */ |
| |
| #define CUR_REGISTERMAP_VERSION 0x10000 |
| |
| #define HARDWARE_VERSION 0x00 |
| #define REGISTERMAP_VERSION 0x04 |
| |
| /* ------------------------------------------------------------------------- */ |
| /* SPI Controller */ |
| |
| #define SPI_CONTROL 0x10 |
| #define SPI_DATA 0x14 |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| #define BOARD_CONTROL 0x30 |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Interrupt controller */ |
| /* How many MSI's are available depends on HW (Min 2 max 8) */ |
| /* How many are usable also depends on Host platform */ |
| |
| #define INTERRUPT_BASE (0x40) |
| |
| #define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00) |
| #define MSI0_ENABLE (INTERRUPT_BASE + 0x00) |
| #define MSI1_ENABLE (INTERRUPT_BASE + 0x04) |
| #define MSI2_ENABLE (INTERRUPT_BASE + 0x08) |
| #define MSI3_ENABLE (INTERRUPT_BASE + 0x0C) |
| #define MSI4_ENABLE (INTERRUPT_BASE + 0x10) |
| #define MSI5_ENABLE (INTERRUPT_BASE + 0x14) |
| #define MSI6_ENABLE (INTERRUPT_BASE + 0x18) |
| #define MSI7_ENABLE (INTERRUPT_BASE + 0x1C) |
| |
| #define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20) |
| #define INTERRUPT_ACK (INTERRUPT_BASE + 0x20) |
| |
| #define INTMASK_I2C1 (0x00000001) |
| #define INTMASK_I2C2 (0x00000002) |
| #define INTMASK_I2C3 (0x00000004) |
| #define INTMASK_I2C4 (0x00000008) |
| |
| #define INTMASK_CIRQ1 (0x00000010) |
| #define INTMASK_CIRQ2 (0x00000020) |
| #define INTMASK_CIRQ3 (0x00000040) |
| #define INTMASK_CIRQ4 (0x00000080) |
| |
| #define INTMASK_TSINPUT1 (0x00000100) |
| #define INTMASK_TSINPUT2 (0x00000200) |
| #define INTMASK_TSINPUT3 (0x00000400) |
| #define INTMASK_TSINPUT4 (0x00000800) |
| #define INTMASK_TSINPUT5 (0x00001000) |
| #define INTMASK_TSINPUT6 (0x00002000) |
| #define INTMASK_TSINPUT7 (0x00004000) |
| #define INTMASK_TSINPUT8 (0x00008000) |
| |
| #define INTMASK_TSOUTPUT1 (0x00010000) |
| #define INTMASK_TSOUTPUT2 (0x00020000) |
| #define INTMASK_TSOUTPUT3 (0x00040000) |
| #define INTMASK_TSOUTPUT4 (0x00080000) |
| |
| /* ------------------------------------------------------------------------- */ |
| /* I2C Master Controller */ |
| |
| #define I2C_BASE (0x80) /* Byte offset */ |
| |
| #define I2C_COMMAND (0x00) |
| #define I2C_TIMING (0x04) |
| #define I2C_TASKLENGTH (0x08) /* High read, low write */ |
| #define I2C_TASKADDRESS (0x0C) /* High read, low write */ |
| |
| #define I2C_MONITOR (0x1C) |
| |
| #define I2C_BASE_1 (I2C_BASE + 0x00) |
| #define I2C_BASE_2 (I2C_BASE + 0x20) |
| #define I2C_BASE_3 (I2C_BASE + 0x40) |
| #define I2C_BASE_4 (I2C_BASE + 0x60) |
| |
| #define I2C_BASE_N(i) (I2C_BASE + (i) * 0x20) |
| |
| #define I2C_TASKMEM_BASE (0x1000) /* Byte offset */ |
| #define I2C_TASKMEM_SIZE (0x1000) |
| |
| #define I2C_SPEED_400 (0x04030404) |
| #define I2C_SPEED_200 (0x09080909) |
| #define I2C_SPEED_154 (0x0C0B0C0C) |
| #define I2C_SPEED_100 (0x13121313) |
| #define I2C_SPEED_77 (0x19181919) |
| #define I2C_SPEED_50 (0x27262727) |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| /* DMA Controller */ |
| |
| #define DMA_BASE_WRITE (0x100) |
| #define DMA_BASE_READ (0x140) |
| |
| #define DMA_CONTROL (0x00) /* 64 */ |
| #define DMA_ERROR (0x04) /* 65 ( only read instance ) */ |
| |
| #define DMA_DIAG_CONTROL (0x1C) /* 71 */ |
| #define DMA_DIAG_PACKETCOUNTER_LOW (0x20) /* 72 */ |
| #define DMA_DIAG_PACKETCOUNTER_HIGH (0x24) /* 73 */ |
| #define DMA_DIAG_TIMECOUNTER_LOW (0x28) /* 74 */ |
| #define DMA_DIAG_TIMECOUNTER_HIGH (0x2C) /* 75 */ |
| #define DMA_DIAG_RECHECKCOUNTER (0x30) /* 76 ( Split completions on read ) */ |
| #define DMA_DIAG_WAITTIMEOUTINIT (0x34) /* 77 */ |
| #define DMA_DIAG_WAITOVERFLOWCOUNTER (0x38) /* 78 */ |
| #define DMA_DIAG_WAITCOUNTER (0x3C) /* 79 */ |
| |
| /* ------------------------------------------------------------------------- */ |
| /* DMA Buffer */ |
| |
| #define TS_INPUT_BASE (0x200) |
| #define TS_INPUT_CONTROL(i) (TS_INPUT_BASE + (i) * 16 + 0x00) |
| |
| #define TS_OUTPUT_BASE (0x280) |
| #define TS_OUTPUT_CONTROL(i) (TS_OUTPUT_BASE + (i) * 16 + 0x00) |
| |
| #define DMA_BUFFER_BASE (0x300) |
| |
| #define DMA_BUFFER_CONTROL(i) (DMA_BUFFER_BASE + (i) * 16 + 0x00) |
| #define DMA_BUFFER_ACK(i) (DMA_BUFFER_BASE + (i) * 16 + 0x04) |
| #define DMA_BUFFER_CURRENT(i) (DMA_BUFFER_BASE + (i) * 16 + 0x08) |
| #define DMA_BUFFER_SIZE(i) (DMA_BUFFER_BASE + (i) * 16 + 0x0c) |
| |
| #define DMA_BASE_ADDRESS_TABLE (0x2000) |
| #define DMA_BASE_ADDRESS_TABLE_ENTRIES (512) |
| |