| /* linux/drivers/mtd/nand/bf5xx_nand.c |
| * |
| * Copyright 2006-2008 Analog Devices Inc. |
| * http://blackfin.uclinux.org/ |
| * Bryan Wu <bryan.wu@analog.com> |
| * |
| * Blackfin BF5xx on-chip NAND flash controller driver |
| * |
| * Derived from drivers/mtd/nand/s3c2410.c |
| * Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk> |
| * |
| * Derived from drivers/mtd/nand/cafe.c |
| * Copyright © 2006 Red Hat, Inc. |
| * Copyright © 2006 David Woodhouse <dwmw2@infradead.org> |
| * |
| * Changelog: |
| * 12-Jun-2007 Bryan Wu: Initial version |
| * 18-Jul-2007 Bryan Wu: |
| * - ECC_HW and ECC_SW supported |
| * - DMA supported in ECC_HW |
| * - YAFFS tested as rootfs in both ECC_HW and ECC_SW |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/ioport.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/bitops.h> |
| |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/nand_ecc.h> |
| #include <linux/mtd/partitions.h> |
| |
| #include <asm/blackfin.h> |
| #include <asm/dma.h> |
| #include <asm/cacheflush.h> |
| #include <asm/nand.h> |
| #include <asm/portmux.h> |
| |
| #define DRV_NAME "bf5xx-nand" |
| #define DRV_VERSION "1.2" |
| #define DRV_AUTHOR "Bryan Wu <bryan.wu@analog.com>" |
| #define DRV_DESC "BF5xx on-chip NAND FLash Controller Driver" |
| |
| /* NFC_STAT Masks */ |
| #define NBUSY 0x01 /* Not Busy */ |
| #define WB_FULL 0x02 /* Write Buffer Full */ |
| #define PG_WR_STAT 0x04 /* Page Write Pending */ |
| #define PG_RD_STAT 0x08 /* Page Read Pending */ |
| #define WB_EMPTY 0x10 /* Write Buffer Empty */ |
| |
| /* NFC_IRQSTAT Masks */ |
| #define NBUSYIRQ 0x01 /* Not Busy IRQ */ |
| #define WB_OVF 0x02 /* Write Buffer Overflow */ |
| #define WB_EDGE 0x04 /* Write Buffer Edge Detect */ |
| #define RD_RDY 0x08 /* Read Data Ready */ |
| #define WR_DONE 0x10 /* Page Write Done */ |
| |
| /* NFC_RST Masks */ |
| #define ECC_RST 0x01 /* ECC (and NFC counters) Reset */ |
| |
| /* NFC_PGCTL Masks */ |
| #define PG_RD_START 0x01 /* Page Read Start */ |
| #define PG_WR_START 0x02 /* Page Write Start */ |
| |
| #ifdef CONFIG_MTD_NAND_BF5XX_HWECC |
| static int hardware_ecc = 1; |
| #else |
| static int hardware_ecc; |
| #endif |
| |
| static const unsigned short bfin_nfc_pin_req[] = |
| {P_NAND_CE, |
| P_NAND_RB, |
| P_NAND_D0, |
| P_NAND_D1, |
| P_NAND_D2, |
| P_NAND_D3, |
| P_NAND_D4, |
| P_NAND_D5, |
| P_NAND_D6, |
| P_NAND_D7, |
| P_NAND_WE, |
| P_NAND_RE, |
| P_NAND_CLE, |
| P_NAND_ALE, |
| 0}; |
| |
| #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC |
| static struct nand_ecclayout bootrom_ecclayout = { |
| .eccbytes = 24, |
| .eccpos = { |
| 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2, |
| 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2, |
| 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2, |
| 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2, |
| 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2, |
| 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2, |
| 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2, |
| 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2 |
| }, |
| .oobfree = { |
| { 0x8 * 0 + 3, 5 }, |
| { 0x8 * 1 + 3, 5 }, |
| { 0x8 * 2 + 3, 5 }, |
| { 0x8 * 3 + 3, 5 }, |
| { 0x8 * 4 + 3, 5 }, |
| { 0x8 * 5 + 3, 5 }, |
| { 0x8 * 6 + 3, 5 }, |
| { 0x8 * 7 + 3, 5 }, |
| } |
| }; |
| #endif |
| |
| /* |
| * Data structures for bf5xx nand flash controller driver |
| */ |
| |
| /* bf5xx nand info */ |
| struct bf5xx_nand_info { |
| /* mtd info */ |
| struct nand_hw_control controller; |
| struct mtd_info mtd; |
| struct nand_chip chip; |
| |
| /* platform info */ |
| struct bf5xx_nand_platform *platform; |
| |
| /* device info */ |
| struct device *device; |
| |
| /* DMA stuff */ |
| struct completion dma_completion; |
| }; |
| |
| /* |
| * Conversion functions |
| */ |
| static struct bf5xx_nand_info *mtd_to_nand_info(struct mtd_info *mtd) |
| { |
| return container_of(mtd, struct bf5xx_nand_info, mtd); |
| } |
| |
| static struct bf5xx_nand_info *to_nand_info(struct platform_device *pdev) |
| { |
| return platform_get_drvdata(pdev); |
| } |
| |
| static struct bf5xx_nand_platform *to_nand_plat(struct platform_device *pdev) |
| { |
| return pdev->dev.platform_data; |
| } |
| |
| /* |
| * struct nand_chip interface function pointers |
| */ |
| |
| /* |
| * bf5xx_nand_hwcontrol |
| * |
| * Issue command and address cycles to the chip |
| */ |
| static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd, |
| unsigned int ctrl) |
| { |
| if (cmd == NAND_CMD_NONE) |
| return; |
| |
| while (bfin_read_NFC_STAT() & WB_FULL) |
| cpu_relax(); |
| |
| if (ctrl & NAND_CLE) |
| bfin_write_NFC_CMD(cmd); |
| else if (ctrl & NAND_ALE) |
| bfin_write_NFC_ADDR(cmd); |
| SSYNC(); |
| } |
| |
| /* |
| * bf5xx_nand_devready() |
| * |
| * returns 0 if the nand is busy, 1 if it is ready |
| */ |
| static int bf5xx_nand_devready(struct mtd_info *mtd) |
| { |
| unsigned short val = bfin_read_NFC_STAT(); |
| |
| if ((val & NBUSY) == NBUSY) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /* |
| * ECC functions |
| * These allow the bf5xx to use the controller's ECC |
| * generator block to ECC the data as it passes through |
| */ |
| |
| /* |
| * ECC error correction function |
| */ |
| static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat, |
| u_char *read_ecc, u_char *calc_ecc) |
| { |
| struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); |
| u32 syndrome[5]; |
| u32 calced, stored; |
| int i; |
| unsigned short failing_bit, failing_byte; |
| u_char data; |
| |
| calced = calc_ecc[0] | (calc_ecc[1] << 8) | (calc_ecc[2] << 16); |
| stored = read_ecc[0] | (read_ecc[1] << 8) | (read_ecc[2] << 16); |
| |
| syndrome[0] = (calced ^ stored); |
| |
| /* |
| * syndrome 0: all zero |
| * No error in data |
| * No action |
| */ |
| if (!syndrome[0] || !calced || !stored) |
| return 0; |
| |
| /* |
| * sysdrome 0: only one bit is one |
| * ECC data was incorrect |
| * No action |
| */ |
| if (hweight32(syndrome[0]) == 1) { |
| dev_err(info->device, "ECC data was incorrect!\n"); |
| return 1; |
| } |
| |
| syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF); |
| syndrome[2] = (calced & 0x7FF) ^ ((calced >> 11) & 0x7FF); |
| syndrome[3] = (stored & 0x7FF) ^ ((stored >> 11) & 0x7FF); |
| syndrome[4] = syndrome[2] ^ syndrome[3]; |
| |
| for (i = 0; i < 5; i++) |
| dev_info(info->device, "syndrome[%d] 0x%08x\n", i, syndrome[i]); |
| |
| dev_info(info->device, |
| "calced[0x%08x], stored[0x%08x]\n", |
| calced, stored); |
| |
| /* |
| * sysdrome 0: exactly 11 bits are one, each parity |
| * and parity' pair is 1 & 0 or 0 & 1. |
| * 1-bit correctable error |
| * Correct the error |
| */ |
| if (hweight32(syndrome[0]) == 11 && syndrome[4] == 0x7FF) { |
| dev_info(info->device, |
| "1-bit correctable error, correct it.\n"); |
| dev_info(info->device, |
| "syndrome[1] 0x%08x\n", syndrome[1]); |
| |
| failing_bit = syndrome[1] & 0x7; |
| failing_byte = syndrome[1] >> 0x3; |
| data = *(dat + failing_byte); |
| data = data ^ (0x1 << failing_bit); |
| *(dat + failing_byte) = data; |
| |
| return 0; |
| } |
| |
| /* |
| * sysdrome 0: random data |
| * More than 1-bit error, non-correctable error |
| * Discard data, mark bad block |
| */ |
| dev_err(info->device, |
| "More than 1-bit error, non-correctable error.\n"); |
| dev_err(info->device, |
| "Please discard data, mark bad block\n"); |
| |
| return 1; |
| } |
| |
| static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat, |
| u_char *read_ecc, u_char *calc_ecc) |
| { |
| struct nand_chip *chip = mtd->priv; |
| int ret; |
| |
| ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); |
| |
| /* If ecc size is 512, correct second 256 bytes */ |
| if (chip->ecc.size == 512) { |
| dat += 256; |
| read_ecc += 3; |
| calc_ecc += 3; |
| ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); |
| } |
| |
| return ret; |
| } |
| |
| static void bf5xx_nand_enable_hwecc(struct mtd_info *mtd, int mode) |
| { |
| return; |
| } |
| |
| static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, |
| const u_char *dat, u_char *ecc_code) |
| { |
| struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); |
| struct nand_chip *chip = mtd->priv; |
| u16 ecc0, ecc1; |
| u32 code[2]; |
| u8 *p; |
| |
| /* first 3 bytes ECC code for 256 page size */ |
| ecc0 = bfin_read_NFC_ECC0(); |
| ecc1 = bfin_read_NFC_ECC1(); |
| |
| code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); |
| |
| dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]); |
| |
| p = (u8 *) code; |
| memcpy(ecc_code, p, 3); |
| |
| /* second 3 bytes ECC code for 512 ecc size */ |
| if (chip->ecc.size == 512) { |
| ecc0 = bfin_read_NFC_ECC2(); |
| ecc1 = bfin_read_NFC_ECC3(); |
| code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); |
| |
| /* second 3 bytes in ecc_code for second 256 |
| * bytes of 512 page size |
| */ |
| p = (u8 *) (code + 1); |
| memcpy((ecc_code + 3), p, 3); |
| dev_dbg(info->device, "returning ecc 0x%08x\n", code[1]); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * PIO mode for buffer writing and reading |
| */ |
| static void bf5xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) |
| { |
| int i; |
| unsigned short val; |
| |
| /* |
| * Data reads are requested by first writing to NFC_DATA_RD |
| * and then reading back from NFC_READ. |
| */ |
| for (i = 0; i < len; i++) { |
| while (bfin_read_NFC_STAT() & WB_FULL) |
| cpu_relax(); |
| |
| /* Contents do not matter */ |
| bfin_write_NFC_DATA_RD(0x0000); |
| SSYNC(); |
| |
| while ((bfin_read_NFC_IRQSTAT() & RD_RDY) != RD_RDY) |
| cpu_relax(); |
| |
| buf[i] = bfin_read_NFC_READ(); |
| |
| val = bfin_read_NFC_IRQSTAT(); |
| val |= RD_RDY; |
| bfin_write_NFC_IRQSTAT(val); |
| SSYNC(); |
| } |
| } |
| |
| static uint8_t bf5xx_nand_read_byte(struct mtd_info *mtd) |
| { |
| uint8_t val; |
| |
| bf5xx_nand_read_buf(mtd, &val, 1); |
| |
| return val; |
| } |
| |
| static void bf5xx_nand_write_buf(struct mtd_info *mtd, |
| const uint8_t *buf, int len) |
| { |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| while (bfin_read_NFC_STAT() & WB_FULL) |
| cpu_relax(); |
| |
| bfin_write_NFC_DATA_WR(buf[i]); |
| SSYNC(); |
| } |
| } |
| |
| static void bf5xx_nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) |
| { |
| int i; |
| u16 *p = (u16 *) buf; |
| len >>= 1; |
| |
| /* |
| * Data reads are requested by first writing to NFC_DATA_RD |
| * and then reading back from NFC_READ. |
| */ |
| bfin_write_NFC_DATA_RD(0x5555); |
| |
| SSYNC(); |
| |
| for (i = 0; i < len; i++) |
| p[i] = bfin_read_NFC_READ(); |
| } |
| |
| static void bf5xx_nand_write_buf16(struct mtd_info *mtd, |
| const uint8_t *buf, int len) |
| { |
| int i; |
| u16 *p = (u16 *) buf; |
| len >>= 1; |
| |
| for (i = 0; i < len; i++) |
| bfin_write_NFC_DATA_WR(p[i]); |
| |
| SSYNC(); |
| } |
| |
| /* |
| * DMA functions for buffer writing and reading |
| */ |
| static irqreturn_t bf5xx_nand_dma_irq(int irq, void *dev_id) |
| { |
| struct bf5xx_nand_info *info = dev_id; |
| |
| clear_dma_irqstat(CH_NFC); |
| disable_dma(CH_NFC); |
| complete(&info->dma_completion); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void bf5xx_nand_dma_rw(struct mtd_info *mtd, |
| uint8_t *buf, int is_read) |
| { |
| struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); |
| struct nand_chip *chip = mtd->priv; |
| unsigned short val; |
| |
| dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n", |
| mtd, buf, is_read); |
| |
| /* |
| * Before starting a dma transfer, be sure to invalidate/flush |
| * the cache over the address range of your DMA buffer to |
| * prevent cache coherency problems. Otherwise very subtle bugs |
| * can be introduced to your driver. |
| */ |
| if (is_read) |
| invalidate_dcache_range((unsigned int)buf, |
| (unsigned int)(buf + chip->ecc.size)); |
| else |
| flush_dcache_range((unsigned int)buf, |
| (unsigned int)(buf + chip->ecc.size)); |
| |
| /* |
| * This register must be written before each page is |
| * transferred to generate the correct ECC register |
| * values. |
| */ |
| bfin_write_NFC_RST(ECC_RST); |
| SSYNC(); |
| while (bfin_read_NFC_RST() & ECC_RST) |
| cpu_relax(); |
| |
| disable_dma(CH_NFC); |
| clear_dma_irqstat(CH_NFC); |
| |
| /* setup DMA register with Blackfin DMA API */ |
| set_dma_config(CH_NFC, 0x0); |
| set_dma_start_addr(CH_NFC, (unsigned long) buf); |
| |
| /* The DMAs have different size on BF52x and BF54x */ |
| #ifdef CONFIG_BF52x |
| set_dma_x_count(CH_NFC, (chip->ecc.size >> 1)); |
| set_dma_x_modify(CH_NFC, 2); |
| val = DI_EN | WDSIZE_16; |
| #endif |
| |
| #ifdef CONFIG_BF54x |
| set_dma_x_count(CH_NFC, (chip->ecc.size >> 2)); |
| set_dma_x_modify(CH_NFC, 4); |
| val = DI_EN | WDSIZE_32; |
| #endif |
| /* setup write or read operation */ |
| if (is_read) |
| val |= WNR; |
| set_dma_config(CH_NFC, val); |
| enable_dma(CH_NFC); |
| |
| /* Start PAGE read/write operation */ |
| if (is_read) |
| bfin_write_NFC_PGCTL(PG_RD_START); |
| else |
| bfin_write_NFC_PGCTL(PG_WR_START); |
| wait_for_completion(&info->dma_completion); |
| } |
| |
| static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd, |
| uint8_t *buf, int len) |
| { |
| struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); |
| struct nand_chip *chip = mtd->priv; |
| |
| dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len); |
| |
| if (len == chip->ecc.size) |
| bf5xx_nand_dma_rw(mtd, buf, 1); |
| else |
| bf5xx_nand_read_buf(mtd, buf, len); |
| } |
| |
| static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd, |
| const uint8_t *buf, int len) |
| { |
| struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); |
| struct nand_chip *chip = mtd->priv; |
| |
| dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len); |
| |
| if (len == chip->ecc.size) |
| bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0); |
| else |
| bf5xx_nand_write_buf(mtd, buf, len); |
| } |
| |
| static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, |
| uint8_t *buf, int oob_required, int page) |
| { |
| bf5xx_nand_read_buf(mtd, buf, mtd->writesize); |
| bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize); |
| |
| return 0; |
| } |
| |
| static int bf5xx_nand_write_page_raw(struct mtd_info *mtd, |
| struct nand_chip *chip, const uint8_t *buf, int oob_required) |
| { |
| bf5xx_nand_write_buf(mtd, buf, mtd->writesize); |
| bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); |
| |
| return 0; |
| } |
| |
| /* |
| * System initialization functions |
| */ |
| static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info) |
| { |
| int ret; |
| |
| /* Do not use dma */ |
| if (!hardware_ecc) |
| return 0; |
| |
| init_completion(&info->dma_completion); |
| |
| /* Request NFC DMA channel */ |
| ret = request_dma(CH_NFC, "BF5XX NFC driver"); |
| if (ret < 0) { |
| dev_err(info->device, " unable to get DMA channel\n"); |
| return ret; |
| } |
| |
| #ifdef CONFIG_BF54x |
| /* Setup DMAC1 channel mux for NFC which shared with SDH */ |
| bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() & ~1); |
| SSYNC(); |
| #endif |
| |
| set_dma_callback(CH_NFC, bf5xx_nand_dma_irq, info); |
| |
| /* Turn off the DMA channel first */ |
| disable_dma(CH_NFC); |
| return 0; |
| } |
| |
| static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info) |
| { |
| /* Free NFC DMA channel */ |
| if (hardware_ecc) |
| free_dma(CH_NFC); |
| } |
| |
| /* |
| * BF5XX NFC hardware initialization |
| * - pin mux setup |
| * - clear interrupt status |
| */ |
| static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info) |
| { |
| int err = 0; |
| unsigned short val; |
| struct bf5xx_nand_platform *plat = info->platform; |
| |
| /* setup NFC_CTL register */ |
| dev_info(info->device, |
| "data_width=%d, wr_dly=%d, rd_dly=%d\n", |
| (plat->data_width ? 16 : 8), |
| plat->wr_dly, plat->rd_dly); |
| |
| val = (1 << NFC_PG_SIZE_OFFSET) | |
| (plat->data_width << NFC_NWIDTH_OFFSET) | |
| (plat->rd_dly << NFC_RDDLY_OFFSET) | |
| (plat->wr_dly << NFC_WRDLY_OFFSET); |
| dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val); |
| |
| bfin_write_NFC_CTL(val); |
| SSYNC(); |
| |
| /* clear interrupt status */ |
| bfin_write_NFC_IRQMASK(0x0); |
| SSYNC(); |
| val = bfin_read_NFC_IRQSTAT(); |
| bfin_write_NFC_IRQSTAT(val); |
| SSYNC(); |
| |
| /* DMA initialization */ |
| if (bf5xx_nand_dma_init(info)) |
| err = -ENXIO; |
| |
| return err; |
| } |
| |
| /* |
| * Device management interface |
| */ |
| static int __devinit bf5xx_nand_add_partition(struct bf5xx_nand_info *info) |
| { |
| struct mtd_info *mtd = &info->mtd; |
| struct mtd_partition *parts = info->platform->partitions; |
| int nr = info->platform->nr_partitions; |
| |
| return mtd_device_register(mtd, parts, nr); |
| } |
| |
| static int __devexit bf5xx_nand_remove(struct platform_device *pdev) |
| { |
| struct bf5xx_nand_info *info = to_nand_info(pdev); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| /* first thing we need to do is release all our mtds |
| * and their partitions, then go through freeing the |
| * resources used |
| */ |
| nand_release(&info->mtd); |
| |
| peripheral_free_list(bfin_nfc_pin_req); |
| bf5xx_nand_dma_remove(info); |
| |
| /* free the common resources */ |
| kfree(info); |
| |
| return 0; |
| } |
| |
| static int bf5xx_nand_scan(struct mtd_info *mtd) |
| { |
| struct nand_chip *chip = mtd->priv; |
| int ret; |
| |
| ret = nand_scan_ident(mtd, 1, NULL); |
| if (ret) |
| return ret; |
| |
| if (hardware_ecc) { |
| /* |
| * for nand with page size > 512B, think it as several sections with 512B |
| */ |
| if (likely(mtd->writesize >= 512)) { |
| chip->ecc.size = 512; |
| chip->ecc.bytes = 6; |
| chip->ecc.strength = 2; |
| } else { |
| chip->ecc.size = 256; |
| chip->ecc.bytes = 3; |
| chip->ecc.strength = 1; |
| bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET)); |
| SSYNC(); |
| } |
| } |
| |
| return nand_scan_tail(mtd); |
| } |
| |
| /* |
| * bf5xx_nand_probe |
| * |
| * called by device layer when it finds a device matching |
| * one our driver can handled. This code checks to see if |
| * it can allocate all necessary resources then calls the |
| * nand layer to look for devices |
| */ |
| static int __devinit bf5xx_nand_probe(struct platform_device *pdev) |
| { |
| struct bf5xx_nand_platform *plat = to_nand_plat(pdev); |
| struct bf5xx_nand_info *info = NULL; |
| struct nand_chip *chip = NULL; |
| struct mtd_info *mtd = NULL; |
| int err = 0; |
| |
| dev_dbg(&pdev->dev, "(%p)\n", pdev); |
| |
| if (!plat) { |
| dev_err(&pdev->dev, "no platform specific information\n"); |
| return -EINVAL; |
| } |
| |
| if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) { |
| dev_err(&pdev->dev, "requesting Peripherals failed\n"); |
| return -EFAULT; |
| } |
| |
| info = kzalloc(sizeof(*info), GFP_KERNEL); |
| if (info == NULL) { |
| dev_err(&pdev->dev, "no memory for flash info\n"); |
| err = -ENOMEM; |
| goto out_err_kzalloc; |
| } |
| |
| platform_set_drvdata(pdev, info); |
| |
| spin_lock_init(&info->controller.lock); |
| init_waitqueue_head(&info->controller.wq); |
| |
| info->device = &pdev->dev; |
| info->platform = plat; |
| |
| /* initialise chip data struct */ |
| chip = &info->chip; |
| |
| if (plat->data_width) |
| chip->options |= NAND_BUSWIDTH_16; |
| |
| chip->options |= NAND_CACHEPRG | NAND_SKIP_BBTSCAN; |
| |
| chip->read_buf = (plat->data_width) ? |
| bf5xx_nand_read_buf16 : bf5xx_nand_read_buf; |
| chip->write_buf = (plat->data_width) ? |
| bf5xx_nand_write_buf16 : bf5xx_nand_write_buf; |
| |
| chip->read_byte = bf5xx_nand_read_byte; |
| |
| chip->cmd_ctrl = bf5xx_nand_hwcontrol; |
| chip->dev_ready = bf5xx_nand_devready; |
| |
| chip->priv = &info->mtd; |
| chip->controller = &info->controller; |
| |
| chip->IO_ADDR_R = (void __iomem *) NFC_READ; |
| chip->IO_ADDR_W = (void __iomem *) NFC_DATA_WR; |
| |
| chip->chip_delay = 0; |
| |
| /* initialise mtd info data struct */ |
| mtd = &info->mtd; |
| mtd->priv = chip; |
| mtd->owner = THIS_MODULE; |
| |
| /* initialise the hardware */ |
| err = bf5xx_nand_hw_init(info); |
| if (err) |
| goto out_err_hw_init; |
| |
| /* setup hardware ECC data struct */ |
| if (hardware_ecc) { |
| #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC |
| chip->ecc.layout = &bootrom_ecclayout; |
| #endif |
| chip->read_buf = bf5xx_nand_dma_read_buf; |
| chip->write_buf = bf5xx_nand_dma_write_buf; |
| chip->ecc.calculate = bf5xx_nand_calculate_ecc; |
| chip->ecc.correct = bf5xx_nand_correct_data; |
| chip->ecc.mode = NAND_ECC_HW; |
| chip->ecc.hwctl = bf5xx_nand_enable_hwecc; |
| chip->ecc.read_page_raw = bf5xx_nand_read_page_raw; |
| chip->ecc.write_page_raw = bf5xx_nand_write_page_raw; |
| } else { |
| chip->ecc.mode = NAND_ECC_SOFT; |
| } |
| |
| /* scan hardware nand chip and setup mtd info data struct */ |
| if (bf5xx_nand_scan(mtd)) { |
| err = -ENXIO; |
| goto out_err_nand_scan; |
| } |
| |
| #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC |
| chip->badblockpos = 63; |
| #endif |
| |
| /* add NAND partition */ |
| bf5xx_nand_add_partition(info); |
| |
| dev_dbg(&pdev->dev, "initialised ok\n"); |
| return 0; |
| |
| out_err_nand_scan: |
| bf5xx_nand_dma_remove(info); |
| out_err_hw_init: |
| platform_set_drvdata(pdev, NULL); |
| kfree(info); |
| out_err_kzalloc: |
| peripheral_free_list(bfin_nfc_pin_req); |
| |
| return err; |
| } |
| |
| /* PM Support */ |
| #ifdef CONFIG_PM |
| |
| static int bf5xx_nand_suspend(struct platform_device *dev, pm_message_t pm) |
| { |
| struct bf5xx_nand_info *info = platform_get_drvdata(dev); |
| |
| return 0; |
| } |
| |
| static int bf5xx_nand_resume(struct platform_device *dev) |
| { |
| struct bf5xx_nand_info *info = platform_get_drvdata(dev); |
| |
| return 0; |
| } |
| |
| #else |
| #define bf5xx_nand_suspend NULL |
| #define bf5xx_nand_resume NULL |
| #endif |
| |
| /* driver device registration */ |
| static struct platform_driver bf5xx_nand_driver = { |
| .probe = bf5xx_nand_probe, |
| .remove = __devexit_p(bf5xx_nand_remove), |
| .suspend = bf5xx_nand_suspend, |
| .resume = bf5xx_nand_resume, |
| .driver = { |
| .name = DRV_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init bf5xx_nand_init(void) |
| { |
| printk(KERN_INFO "%s, Version %s (c) 2007 Analog Devices, Inc.\n", |
| DRV_DESC, DRV_VERSION); |
| |
| return platform_driver_register(&bf5xx_nand_driver); |
| } |
| |
| static void __exit bf5xx_nand_exit(void) |
| { |
| platform_driver_unregister(&bf5xx_nand_driver); |
| } |
| |
| module_init(bf5xx_nand_init); |
| module_exit(bf5xx_nand_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR(DRV_AUTHOR); |
| MODULE_DESCRIPTION(DRV_DESC); |
| MODULE_ALIAS("platform:" DRV_NAME); |