| /* |
| * PowerNV cpuidle code |
| * |
| * Copyright 2015 IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/device.h> |
| #include <linux/cpu.h> |
| |
| #include <asm/firmware.h> |
| #include <asm/machdep.h> |
| #include <asm/opal.h> |
| #include <asm/cputhreads.h> |
| #include <asm/cpuidle.h> |
| #include <asm/code-patching.h> |
| #include <asm/smp.h> |
| #include <asm/runlatch.h> |
| |
| #include "powernv.h" |
| #include "subcore.h" |
| |
| /* Power ISA 3.0 allows for stop states 0x0 - 0xF */ |
| #define MAX_STOP_STATE 0xF |
| |
| #define P9_STOP_SPR_MSR 2000 |
| #define P9_STOP_SPR_PSSCR 855 |
| |
| static u32 supported_cpuidle_states; |
| |
| /* |
| * The default stop state that will be used by ppc_md.power_save |
| * function on platforms that support stop instruction. |
| */ |
| static u64 pnv_default_stop_val; |
| static u64 pnv_default_stop_mask; |
| static bool default_stop_found; |
| |
| /* |
| * First deep stop state. Used to figure out when to save/restore |
| * hypervisor context. |
| */ |
| u64 pnv_first_deep_stop_state = MAX_STOP_STATE; |
| |
| /* |
| * psscr value and mask of the deepest stop idle state. |
| * Used when a cpu is offlined. |
| */ |
| static u64 pnv_deepest_stop_psscr_val; |
| static u64 pnv_deepest_stop_psscr_mask; |
| static u64 pnv_deepest_stop_flag; |
| static bool deepest_stop_found; |
| |
| static int pnv_save_sprs_for_deep_states(void) |
| { |
| int cpu; |
| int rc; |
| |
| /* |
| * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric across |
| * all cpus at boot. Get these reg values of current cpu and use the |
| * same across all cpus. |
| */ |
| uint64_t lpcr_val = mfspr(SPRN_LPCR); |
| uint64_t hid0_val = mfspr(SPRN_HID0); |
| uint64_t hid1_val = mfspr(SPRN_HID1); |
| uint64_t hid4_val = mfspr(SPRN_HID4); |
| uint64_t hid5_val = mfspr(SPRN_HID5); |
| uint64_t hmeer_val = mfspr(SPRN_HMEER); |
| uint64_t msr_val = MSR_IDLE; |
| uint64_t psscr_val = pnv_deepest_stop_psscr_val; |
| |
| for_each_present_cpu(cpu) { |
| uint64_t pir = get_hard_smp_processor_id(cpu); |
| uint64_t hsprg0_val = (uint64_t)&paca[cpu]; |
| |
| rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val); |
| if (rc != 0) |
| return rc; |
| |
| rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val); |
| if (rc != 0) |
| return rc; |
| |
| if (cpu_has_feature(CPU_FTR_ARCH_300)) { |
| rc = opal_slw_set_reg(pir, P9_STOP_SPR_MSR, msr_val); |
| if (rc) |
| return rc; |
| |
| rc = opal_slw_set_reg(pir, |
| P9_STOP_SPR_PSSCR, psscr_val); |
| |
| if (rc) |
| return rc; |
| } |
| |
| /* HIDs are per core registers */ |
| if (cpu_thread_in_core(cpu) == 0) { |
| |
| rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val); |
| if (rc != 0) |
| return rc; |
| |
| rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val); |
| if (rc != 0) |
| return rc; |
| |
| /* Only p8 needs to set extra HID regiters */ |
| if (!cpu_has_feature(CPU_FTR_ARCH_300)) { |
| |
| rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val); |
| if (rc != 0) |
| return rc; |
| |
| rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val); |
| if (rc != 0) |
| return rc; |
| |
| rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val); |
| if (rc != 0) |
| return rc; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void pnv_alloc_idle_core_states(void) |
| { |
| int i, j; |
| int nr_cores = cpu_nr_cores(); |
| u32 *core_idle_state; |
| |
| /* |
| * core_idle_state - The lower 8 bits track the idle state of |
| * each thread of the core. |
| * |
| * The most significant bit is the lock bit. |
| * |
| * Initially all the bits corresponding to threads_per_core |
| * are set. They are cleared when the thread enters deep idle |
| * state like sleep and winkle/stop. |
| * |
| * Initially the lock bit is cleared. The lock bit has 2 |
| * purposes: |
| * a. While the first thread in the core waking up from |
| * idle is restoring core state, it prevents other |
| * threads in the core from switching to process |
| * context. |
| * b. While the last thread in the core is saving the |
| * core state, it prevents a different thread from |
| * waking up. |
| */ |
| for (i = 0; i < nr_cores; i++) { |
| int first_cpu = i * threads_per_core; |
| int node = cpu_to_node(first_cpu); |
| size_t paca_ptr_array_size; |
| |
| core_idle_state = kmalloc_node(sizeof(u32), GFP_KERNEL, node); |
| *core_idle_state = (1 << threads_per_core) - 1; |
| paca_ptr_array_size = (threads_per_core * |
| sizeof(struct paca_struct *)); |
| |
| for (j = 0; j < threads_per_core; j++) { |
| int cpu = first_cpu + j; |
| |
| paca[cpu].core_idle_state_ptr = core_idle_state; |
| paca[cpu].thread_idle_state = PNV_THREAD_RUNNING; |
| paca[cpu].thread_mask = 1 << j; |
| if (!cpu_has_feature(CPU_FTR_POWER9_DD1)) |
| continue; |
| paca[cpu].thread_sibling_pacas = |
| kmalloc_node(paca_ptr_array_size, |
| GFP_KERNEL, node); |
| } |
| } |
| |
| update_subcore_sibling_mask(); |
| |
| if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT) { |
| int rc = pnv_save_sprs_for_deep_states(); |
| |
| if (likely(!rc)) |
| return; |
| |
| /* |
| * The stop-api is unable to restore hypervisor |
| * resources on wakeup from platform idle states which |
| * lose full context. So disable such states. |
| */ |
| supported_cpuidle_states &= ~OPAL_PM_LOSE_FULL_CONTEXT; |
| pr_warn("cpuidle-powernv: Disabling idle states that lose full context\n"); |
| pr_warn("cpuidle-powernv: Idle power-savings, CPU-Hotplug affected\n"); |
| |
| if (cpu_has_feature(CPU_FTR_ARCH_300) && |
| (pnv_deepest_stop_flag & OPAL_PM_LOSE_FULL_CONTEXT)) { |
| /* |
| * Use the default stop state for CPU-Hotplug |
| * if available. |
| */ |
| if (default_stop_found) { |
| pnv_deepest_stop_psscr_val = |
| pnv_default_stop_val; |
| pnv_deepest_stop_psscr_mask = |
| pnv_default_stop_mask; |
| pr_warn("cpuidle-powernv: Offlined CPUs will stop with psscr = 0x%016llx\n", |
| pnv_deepest_stop_psscr_val); |
| } else { /* Fallback to snooze loop for CPU-Hotplug */ |
| deepest_stop_found = false; |
| pr_warn("cpuidle-powernv: Offlined CPUs will busy wait\n"); |
| } |
| } |
| } |
| } |
| |
| u32 pnv_get_supported_cpuidle_states(void) |
| { |
| return supported_cpuidle_states; |
| } |
| EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states); |
| |
| static void pnv_fastsleep_workaround_apply(void *info) |
| |
| { |
| int rc; |
| int *err = info; |
| |
| rc = opal_config_cpu_idle_state(OPAL_CONFIG_IDLE_FASTSLEEP, |
| OPAL_CONFIG_IDLE_APPLY); |
| if (rc) |
| *err = 1; |
| } |
| |
| /* |
| * Used to store fastsleep workaround state |
| * 0 - Workaround applied/undone at fastsleep entry/exit path (Default) |
| * 1 - Workaround applied once, never undone. |
| */ |
| static u8 fastsleep_workaround_applyonce; |
| |
| static ssize_t show_fastsleep_workaround_applyonce(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%u\n", fastsleep_workaround_applyonce); |
| } |
| |
| static ssize_t store_fastsleep_workaround_applyonce(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| cpumask_t primary_thread_mask; |
| int err; |
| u8 val; |
| |
| if (kstrtou8(buf, 0, &val) || val != 1) |
| return -EINVAL; |
| |
| if (fastsleep_workaround_applyonce == 1) |
| return count; |
| |
| /* |
| * fastsleep_workaround_applyonce = 1 implies |
| * fastsleep workaround needs to be left in 'applied' state on all |
| * the cores. Do this by- |
| * 1. Patching out the call to 'undo' workaround in fastsleep exit path |
| * 2. Sending ipi to all the cores which have at least one online thread |
| * 3. Patching out the call to 'apply' workaround in fastsleep entry |
| * path |
| * There is no need to send ipi to cores which have all threads |
| * offlined, as last thread of the core entering fastsleep or deeper |
| * state would have applied workaround. |
| */ |
| err = patch_instruction( |
| (unsigned int *)pnv_fastsleep_workaround_at_exit, |
| PPC_INST_NOP); |
| if (err) { |
| pr_err("fastsleep_workaround_applyonce change failed while patching pnv_fastsleep_workaround_at_exit"); |
| goto fail; |
| } |
| |
| get_online_cpus(); |
| primary_thread_mask = cpu_online_cores_map(); |
| on_each_cpu_mask(&primary_thread_mask, |
| pnv_fastsleep_workaround_apply, |
| &err, 1); |
| put_online_cpus(); |
| if (err) { |
| pr_err("fastsleep_workaround_applyonce change failed while running pnv_fastsleep_workaround_apply"); |
| goto fail; |
| } |
| |
| err = patch_instruction( |
| (unsigned int *)pnv_fastsleep_workaround_at_entry, |
| PPC_INST_NOP); |
| if (err) { |
| pr_err("fastsleep_workaround_applyonce change failed while patching pnv_fastsleep_workaround_at_entry"); |
| goto fail; |
| } |
| |
| fastsleep_workaround_applyonce = 1; |
| |
| return count; |
| fail: |
| return -EIO; |
| } |
| |
| static DEVICE_ATTR(fastsleep_workaround_applyonce, 0600, |
| show_fastsleep_workaround_applyonce, |
| store_fastsleep_workaround_applyonce); |
| |
| static unsigned long __power7_idle_type(unsigned long type) |
| { |
| unsigned long srr1; |
| |
| if (!prep_irq_for_idle_irqsoff()) |
| return 0; |
| |
| __ppc64_runlatch_off(); |
| srr1 = power7_idle_insn(type); |
| __ppc64_runlatch_on(); |
| |
| fini_irq_for_idle_irqsoff(); |
| |
| return srr1; |
| } |
| |
| void power7_idle_type(unsigned long type) |
| { |
| unsigned long srr1; |
| |
| srr1 = __power7_idle_type(type); |
| irq_set_pending_from_srr1(srr1); |
| } |
| |
| void power7_idle(void) |
| { |
| if (!powersave_nap) |
| return; |
| |
| power7_idle_type(PNV_THREAD_NAP); |
| } |
| |
| static unsigned long __power9_idle_type(unsigned long stop_psscr_val, |
| unsigned long stop_psscr_mask) |
| { |
| unsigned long psscr; |
| unsigned long srr1; |
| |
| if (!prep_irq_for_idle_irqsoff()) |
| return 0; |
| |
| psscr = mfspr(SPRN_PSSCR); |
| psscr = (psscr & ~stop_psscr_mask) | stop_psscr_val; |
| |
| __ppc64_runlatch_off(); |
| srr1 = power9_idle_stop(psscr); |
| __ppc64_runlatch_on(); |
| |
| fini_irq_for_idle_irqsoff(); |
| |
| return srr1; |
| } |
| |
| void power9_idle_type(unsigned long stop_psscr_val, |
| unsigned long stop_psscr_mask) |
| { |
| unsigned long srr1; |
| |
| srr1 = __power9_idle_type(stop_psscr_val, stop_psscr_mask); |
| irq_set_pending_from_srr1(srr1); |
| } |
| |
| /* |
| * Used for ppc_md.power_save which needs a function with no parameters |
| */ |
| void power9_idle(void) |
| { |
| power9_idle_type(pnv_default_stop_val, pnv_default_stop_mask); |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| static void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val) |
| { |
| u64 pir = get_hard_smp_processor_id(cpu); |
| |
| mtspr(SPRN_LPCR, lpcr_val); |
| |
| /* |
| * Program the LPCR via stop-api only if the deepest stop state |
| * can lose hypervisor context. |
| */ |
| if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT) |
| opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val); |
| } |
| |
| /* |
| * pnv_cpu_offline: A function that puts the CPU into the deepest |
| * available platform idle state on a CPU-Offline. |
| * interrupts hard disabled and no lazy irq pending. |
| */ |
| unsigned long pnv_cpu_offline(unsigned int cpu) |
| { |
| unsigned long srr1; |
| u32 idle_states = pnv_get_supported_cpuidle_states(); |
| u64 lpcr_val; |
| |
| /* |
| * We don't want to take decrementer interrupts while we are |
| * offline, so clear LPCR:PECE1. We keep PECE2 (and |
| * LPCR_PECE_HVEE on P9) enabled as to let IPIs in. |
| * |
| * If the CPU gets woken up by a special wakeup, ensure that |
| * the SLW engine sets LPCR with decrementer bit cleared, else |
| * the CPU will come back to the kernel due to a spurious |
| * wakeup. |
| */ |
| lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1; |
| pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val); |
| |
| __ppc64_runlatch_off(); |
| |
| if (cpu_has_feature(CPU_FTR_ARCH_300) && deepest_stop_found) { |
| unsigned long psscr; |
| |
| psscr = mfspr(SPRN_PSSCR); |
| psscr = (psscr & ~pnv_deepest_stop_psscr_mask) | |
| pnv_deepest_stop_psscr_val; |
| srr1 = power9_idle_stop(psscr); |
| |
| } else if ((idle_states & OPAL_PM_WINKLE_ENABLED) && |
| (idle_states & OPAL_PM_LOSE_FULL_CONTEXT)) { |
| srr1 = power7_idle_insn(PNV_THREAD_WINKLE); |
| } else if ((idle_states & OPAL_PM_SLEEP_ENABLED) || |
| (idle_states & OPAL_PM_SLEEP_ENABLED_ER1)) { |
| srr1 = power7_idle_insn(PNV_THREAD_SLEEP); |
| } else if (idle_states & OPAL_PM_NAP_ENABLED) { |
| srr1 = power7_idle_insn(PNV_THREAD_NAP); |
| } else { |
| /* This is the fallback method. We emulate snooze */ |
| while (!generic_check_cpu_restart(cpu)) { |
| HMT_low(); |
| HMT_very_low(); |
| } |
| srr1 = 0; |
| HMT_medium(); |
| } |
| |
| __ppc64_runlatch_on(); |
| |
| /* |
| * Re-enable decrementer interrupts in LPCR. |
| * |
| * Further, we want stop states to be woken up by decrementer |
| * for non-hotplug cases. So program the LPCR via stop api as |
| * well. |
| */ |
| lpcr_val = mfspr(SPRN_LPCR) | (u64)LPCR_PECE1; |
| pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val); |
| |
| return srr1; |
| } |
| #endif |
| |
| /* |
| * Power ISA 3.0 idle initialization. |
| * |
| * POWER ISA 3.0 defines a new SPR Processor stop Status and Control |
| * Register (PSSCR) to control idle behavior. |
| * |
| * PSSCR layout: |
| * ---------------------------------------------------------- |
| * | PLS | /// | SD | ESL | EC | PSLL | /// | TR | MTL | RL | |
| * ---------------------------------------------------------- |
| * 0 4 41 42 43 44 48 54 56 60 |
| * |
| * PSSCR key fields: |
| * Bits 0:3 - Power-Saving Level Status (PLS). This field indicates the |
| * lowest power-saving state the thread entered since stop instruction was |
| * last executed. |
| * |
| * Bit 41 - Status Disable(SD) |
| * 0 - Shows PLS entries |
| * 1 - PLS entries are all 0 |
| * |
| * Bit 42 - Enable State Loss |
| * 0 - No state is lost irrespective of other fields |
| * 1 - Allows state loss |
| * |
| * Bit 43 - Exit Criterion |
| * 0 - Exit from power-save mode on any interrupt |
| * 1 - Exit from power-save mode controlled by LPCR's PECE bits |
| * |
| * Bits 44:47 - Power-Saving Level Limit |
| * This limits the power-saving level that can be entered into. |
| * |
| * Bits 60:63 - Requested Level |
| * Used to specify which power-saving level must be entered on executing |
| * stop instruction |
| */ |
| |
| int validate_psscr_val_mask(u64 *psscr_val, u64 *psscr_mask, u32 flags) |
| { |
| int err = 0; |
| |
| /* |
| * psscr_mask == 0xf indicates an older firmware. |
| * Set remaining fields of psscr to the default values. |
| * See NOTE above definition of PSSCR_HV_DEFAULT_VAL |
| */ |
| if (*psscr_mask == 0xf) { |
| *psscr_val = *psscr_val | PSSCR_HV_DEFAULT_VAL; |
| *psscr_mask = PSSCR_HV_DEFAULT_MASK; |
| return err; |
| } |
| |
| /* |
| * New firmware is expected to set the psscr_val bits correctly. |
| * Validate that the following invariants are correctly maintained by |
| * the new firmware. |
| * - ESL bit value matches the EC bit value. |
| * - ESL bit is set for all the deep stop states. |
| */ |
| if (GET_PSSCR_ESL(*psscr_val) != GET_PSSCR_EC(*psscr_val)) { |
| err = ERR_EC_ESL_MISMATCH; |
| } else if ((flags & OPAL_PM_LOSE_FULL_CONTEXT) && |
| GET_PSSCR_ESL(*psscr_val) == 0) { |
| err = ERR_DEEP_STATE_ESL_MISMATCH; |
| } |
| |
| return err; |
| } |
| |
| /* |
| * pnv_arch300_idle_init: Initializes the default idle state, first |
| * deep idle state and deepest idle state on |
| * ISA 3.0 CPUs. |
| * |
| * @np: /ibm,opal/power-mgt device node |
| * @flags: cpu-idle-state-flags array |
| * @dt_idle_states: Number of idle state entries |
| * Returns 0 on success |
| */ |
| static int __init pnv_power9_idle_init(struct device_node *np, u32 *flags, |
| int dt_idle_states) |
| { |
| u64 *psscr_val = NULL; |
| u64 *psscr_mask = NULL; |
| u32 *residency_ns = NULL; |
| u64 max_residency_ns = 0; |
| int rc = 0, i; |
| |
| psscr_val = kcalloc(dt_idle_states, sizeof(*psscr_val), GFP_KERNEL); |
| psscr_mask = kcalloc(dt_idle_states, sizeof(*psscr_mask), GFP_KERNEL); |
| residency_ns = kcalloc(dt_idle_states, sizeof(*residency_ns), |
| GFP_KERNEL); |
| |
| if (!psscr_val || !psscr_mask || !residency_ns) { |
| rc = -1; |
| goto out; |
| } |
| |
| if (of_property_read_u64_array(np, |
| "ibm,cpu-idle-state-psscr", |
| psscr_val, dt_idle_states)) { |
| pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr in DT\n"); |
| rc = -1; |
| goto out; |
| } |
| |
| if (of_property_read_u64_array(np, |
| "ibm,cpu-idle-state-psscr-mask", |
| psscr_mask, dt_idle_states)) { |
| pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr-mask in DT\n"); |
| rc = -1; |
| goto out; |
| } |
| |
| if (of_property_read_u32_array(np, |
| "ibm,cpu-idle-state-residency-ns", |
| residency_ns, dt_idle_states)) { |
| pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-residency-ns in DT\n"); |
| rc = -1; |
| goto out; |
| } |
| |
| /* |
| * Set pnv_first_deep_stop_state, pnv_deepest_stop_psscr_{val,mask}, |
| * and the pnv_default_stop_{val,mask}. |
| * |
| * pnv_first_deep_stop_state should be set to the first stop |
| * level to cause hypervisor state loss. |
| * |
| * pnv_deepest_stop_{val,mask} should be set to values corresponding to |
| * the deepest stop state. |
| * |
| * pnv_default_stop_{val,mask} should be set to values corresponding to |
| * the shallowest (OPAL_PM_STOP_INST_FAST) loss-less stop state. |
| */ |
| pnv_first_deep_stop_state = MAX_STOP_STATE; |
| for (i = 0; i < dt_idle_states; i++) { |
| int err; |
| u64 psscr_rl = psscr_val[i] & PSSCR_RL_MASK; |
| |
| if ((flags[i] & OPAL_PM_LOSE_FULL_CONTEXT) && |
| (pnv_first_deep_stop_state > psscr_rl)) |
| pnv_first_deep_stop_state = psscr_rl; |
| |
| err = validate_psscr_val_mask(&psscr_val[i], &psscr_mask[i], |
| flags[i]); |
| if (err) { |
| report_invalid_psscr_val(psscr_val[i], err); |
| continue; |
| } |
| |
| if (max_residency_ns < residency_ns[i]) { |
| max_residency_ns = residency_ns[i]; |
| pnv_deepest_stop_psscr_val = psscr_val[i]; |
| pnv_deepest_stop_psscr_mask = psscr_mask[i]; |
| pnv_deepest_stop_flag = flags[i]; |
| deepest_stop_found = true; |
| } |
| |
| if (!default_stop_found && |
| (flags[i] & OPAL_PM_STOP_INST_FAST)) { |
| pnv_default_stop_val = psscr_val[i]; |
| pnv_default_stop_mask = psscr_mask[i]; |
| default_stop_found = true; |
| } |
| } |
| |
| if (unlikely(!default_stop_found)) { |
| pr_warn("cpuidle-powernv: No suitable default stop state found. Disabling platform idle.\n"); |
| } else { |
| ppc_md.power_save = power9_idle; |
| pr_info("cpuidle-powernv: Default stop: psscr = 0x%016llx,mask=0x%016llx\n", |
| pnv_default_stop_val, pnv_default_stop_mask); |
| } |
| |
| if (unlikely(!deepest_stop_found)) { |
| pr_warn("cpuidle-powernv: No suitable stop state for CPU-Hotplug. Offlined CPUs will busy wait"); |
| } else { |
| pr_info("cpuidle-powernv: Deepest stop: psscr = 0x%016llx,mask=0x%016llx\n", |
| pnv_deepest_stop_psscr_val, |
| pnv_deepest_stop_psscr_mask); |
| } |
| |
| pr_info("cpuidle-powernv: Requested Level (RL) value of first deep stop = 0x%llx\n", |
| pnv_first_deep_stop_state); |
| out: |
| kfree(psscr_val); |
| kfree(psscr_mask); |
| kfree(residency_ns); |
| return rc; |
| } |
| |
| /* |
| * Probe device tree for supported idle states |
| */ |
| static void __init pnv_probe_idle_states(void) |
| { |
| struct device_node *np; |
| int dt_idle_states; |
| u32 *flags = NULL; |
| int i; |
| |
| np = of_find_node_by_path("/ibm,opal/power-mgt"); |
| if (!np) { |
| pr_warn("opal: PowerMgmt Node not found\n"); |
| goto out; |
| } |
| dt_idle_states = of_property_count_u32_elems(np, |
| "ibm,cpu-idle-state-flags"); |
| if (dt_idle_states < 0) { |
| pr_warn("cpuidle-powernv: no idle states found in the DT\n"); |
| goto out; |
| } |
| |
| flags = kcalloc(dt_idle_states, sizeof(*flags), GFP_KERNEL); |
| |
| if (of_property_read_u32_array(np, |
| "ibm,cpu-idle-state-flags", flags, dt_idle_states)) { |
| pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n"); |
| goto out; |
| } |
| |
| if (cpu_has_feature(CPU_FTR_ARCH_300)) { |
| if (pnv_power9_idle_init(np, flags, dt_idle_states)) |
| goto out; |
| } |
| |
| for (i = 0; i < dt_idle_states; i++) |
| supported_cpuidle_states |= flags[i]; |
| |
| out: |
| kfree(flags); |
| } |
| static int __init pnv_init_idle_states(void) |
| { |
| |
| supported_cpuidle_states = 0; |
| |
| if (cpuidle_disable != IDLE_NO_OVERRIDE) |
| goto out; |
| |
| pnv_probe_idle_states(); |
| |
| if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) { |
| patch_instruction( |
| (unsigned int *)pnv_fastsleep_workaround_at_entry, |
| PPC_INST_NOP); |
| patch_instruction( |
| (unsigned int *)pnv_fastsleep_workaround_at_exit, |
| PPC_INST_NOP); |
| } else { |
| /* |
| * OPAL_PM_SLEEP_ENABLED_ER1 is set. It indicates that |
| * workaround is needed to use fastsleep. Provide sysfs |
| * control to choose how this workaround has to be applied. |
| */ |
| device_create_file(cpu_subsys.dev_root, |
| &dev_attr_fastsleep_workaround_applyonce); |
| } |
| |
| pnv_alloc_idle_core_states(); |
| |
| /* |
| * For each CPU, record its PACA address in each of it's |
| * sibling thread's PACA at the slot corresponding to this |
| * CPU's index in the core. |
| */ |
| if (cpu_has_feature(CPU_FTR_POWER9_DD1)) { |
| int cpu; |
| |
| pr_info("powernv: idle: Saving PACA pointers of all CPUs in their thread sibling PACA\n"); |
| for_each_present_cpu(cpu) { |
| int base_cpu = cpu_first_thread_sibling(cpu); |
| int idx = cpu_thread_in_core(cpu); |
| int i; |
| |
| for (i = 0; i < threads_per_core; i++) { |
| int j = base_cpu + i; |
| |
| paca[j].thread_sibling_pacas[idx] = &paca[cpu]; |
| } |
| } |
| } |
| |
| if (supported_cpuidle_states & OPAL_PM_NAP_ENABLED) |
| ppc_md.power_save = power7_idle; |
| |
| out: |
| return 0; |
| } |
| machine_subsys_initcall(powernv, pnv_init_idle_states); |