arch/powerpc/net/bpf_jit_comp.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /* bpf_jit_comp.c: BPF JIT compiler
  *
  * Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation
  *
  * Based on the x86 BPF compiler, by Eric Dumazet (eric.dumazet@gmail.com)
  * Ported to ppc32 by Denis Kirjanov <kda@linux-powerpc.org>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; version 2
  * of the License.
  */
 #include <linux/moduleloader.h>
 #include <asm/cacheflush.h>
 #include <linux/netdevice.h>
 #include <linux/filter.h>
 #include <linux/if_vlan.h>

 #include "bpf_jit32.h"

 static inline void bpf_flush_icache(void *start, void *end)
 {
 	smp_wmb();
 	flush_icache_range((unsigned long)start, (unsigned long)end);
 }

 static void bpf_jit_build_prologue(struct bpf_prog *fp, u32 *image,
 				   struct codegen_context *ctx)
 {
 	int i;
 	const struct sock_filter *filter = fp->insns;

 	if (ctx->seen & (SEEN_MEM | SEEN_DATAREF)) {
 		/* Make stackframe */
 		if (ctx->seen & SEEN_DATAREF) {
 			/* If we call any helpers (for loads), save LR */
 			EMIT(PPC_INST_MFLR | __PPC_RT(R0));
 			PPC_BPF_STL(0, 1, PPC_LR_STKOFF);

 			/* Back up non-volatile regs. */
 			PPC_BPF_STL(r_D, 1, -(REG_SZ*(32-r_D)));
 			PPC_BPF_STL(r_HL, 1, -(REG_SZ*(32-r_HL)));
 		}
 		if (ctx->seen & SEEN_MEM) {
 			/*
 			 * Conditionally save regs r15-r31 as some will be used
 			 * for M[] data.
 			 */
 			for (i = r_M; i < (r_M+16); i++) {
 				if (ctx->seen & (1 << (i-r_M)))
 					PPC_BPF_STL(i, 1, -(REG_SZ*(32-i)));
 			}
 		}
 		PPC_BPF_STLU(1, 1, -BPF_PPC_STACKFRAME);
 	}

 	if (ctx->seen & SEEN_DATAREF) {
 		/*
 		 * If this filter needs to access skb data,
 		 * prepare r_D and r_HL:
 		 *  r_HL = skb->len - skb->data_len
 		 *  r_D	 = skb->data
 		 */
 		PPC_LWZ_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff,
 							 data_len));
 		PPC_LWZ_OFFS(r_HL, r_skb, offsetof(struct sk_buff, len));
 		PPC_SUB(r_HL, r_HL, r_scratch1);
 		PPC_LL_OFFS(r_D, r_skb, offsetof(struct sk_buff, data));
 	}

 	if (ctx->seen & SEEN_XREG) {
 		/*
 		 * TODO: Could also detect whether first instr. sets X and
 		 * avoid this (as below, with A).
 		 */
 		PPC_LI(r_X, 0);
 	}

 	/* make sure we dont leak kernel information to user */
 	if (bpf_needs_clear_a(&filter[0]))
 		PPC_LI(r_A, 0);
 }

 static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
 {
 	int i;

 	if (ctx->seen & (SEEN_MEM | SEEN_DATAREF)) {
 		PPC_ADDI(1, 1, BPF_PPC_STACKFRAME);
 		if (ctx->seen & SEEN_DATAREF) {
 			PPC_BPF_LL(0, 1, PPC_LR_STKOFF);
 			PPC_MTLR(0);
 			PPC_BPF_LL(r_D, 1, -(REG_SZ*(32-r_D)));
 			PPC_BPF_LL(r_HL, 1, -(REG_SZ*(32-r_HL)));
 		}
 		if (ctx->seen & SEEN_MEM) {
 			/* Restore any saved non-vol registers */
 			for (i = r_M; i < (r_M+16); i++) {
 				if (ctx->seen & (1 << (i-r_M)))
 					PPC_BPF_LL(i, 1, -(REG_SZ*(32-i)));
 			}
 		}
 	}
 	/* The RETs have left a return value in R3. */

 	PPC_BLR();
 }

 #define CHOOSE_LOAD_FUNC(K, func) \
 	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)

 /* Assemble the body code between the prologue & epilogue. */
 static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 			      struct codegen_context *ctx,
 			      unsigned int *addrs)
 {
 	const struct sock_filter *filter = fp->insns;
 	int flen = fp->len;
 	u8 *func;
 	unsigned int true_cond;
 	int i;

 	/* Start of epilogue code */
 	unsigned int exit_addr = addrs[flen];

 	for (i = 0; i < flen; i++) {
 		unsigned int K = filter[i].k;
 		u16 code = bpf_anc_helper(&filter[i]);

 		/*
 		 * addrs[] maps a BPF bytecode address into a real offset from
 		 * the start of the body code.
 		 */
 		addrs[i] = ctx->idx * 4;

 		switch (code) {
 			/*** ALU ops ***/
 		case BPF_ALU | BPF_ADD | BPF_X: /* A += X; */
 			ctx->seen |= SEEN_XREG;
 			PPC_ADD(r_A, r_A, r_X);
 			break;
 		case BPF_ALU | BPF_ADD | BPF_K: /* A += K; */
 			if (!K)
 				break;
 			PPC_ADDI(r_A, r_A, IMM_L(K));
 			if (K >= 32768)
 				PPC_ADDIS(r_A, r_A, IMM_HA(K));
 			break;
 		case BPF_ALU | BPF_SUB | BPF_X: /* A -= X; */
 			ctx->seen |= SEEN_XREG;
 			PPC_SUB(r_A, r_A, r_X);
 			break;
 		case BPF_ALU | BPF_SUB | BPF_K: /* A -= K */
 			if (!K)
 				break;
 			PPC_ADDI(r_A, r_A, IMM_L(-K));
 			if (K >= 32768)
 				PPC_ADDIS(r_A, r_A, IMM_HA(-K));
 			break;
 		case BPF_ALU | BPF_MUL | BPF_X: /* A *= X; */
 			ctx->seen |= SEEN_XREG;
 			PPC_MULW(r_A, r_A, r_X);
 			break;
 		case BPF_ALU | BPF_MUL | BPF_K: /* A *= K */
 			if (K < 32768)
 				PPC_MULI(r_A, r_A, K);
 			else {
 				PPC_LI32(r_scratch1, K);
 				PPC_MULW(r_A, r_A, r_scratch1);
 			}
 			break;
 		case BPF_ALU | BPF_MOD | BPF_X: /* A %= X; */
 		case BPF_ALU | BPF_DIV | BPF_X: /* A /= X; */
 			ctx->seen |= SEEN_XREG;
 			PPC_CMPWI(r_X, 0);
 			if (ctx->pc_ret0 != -1) {
 				PPC_BCC(COND_EQ, addrs[ctx->pc_ret0]);
 			} else {
 				PPC_BCC_SHORT(COND_NE, (ctx->idx*4)+12);
 				PPC_LI(r_ret, 0);
 				PPC_JMP(exit_addr);
 			}
 			if (code == (BPF_ALU | BPF_MOD | BPF_X)) {
 				PPC_DIVWU(r_scratch1, r_A, r_X);
 				PPC_MULW(r_scratch1, r_X, r_scratch1);
 				PPC_SUB(r_A, r_A, r_scratch1);
 			} else {
 				PPC_DIVWU(r_A, r_A, r_X);
 			}
 			break;
 		case BPF_ALU | BPF_MOD | BPF_K: /* A %= K; */
 			PPC_LI32(r_scratch2, K);
 			PPC_DIVWU(r_scratch1, r_A, r_scratch2);
 			PPC_MULW(r_scratch1, r_scratch2, r_scratch1);
 			PPC_SUB(r_A, r_A, r_scratch1);
 			break;
 		case BPF_ALU | BPF_DIV | BPF_K: /* A /= K */
 			if (K == 1)
 				break;
 			PPC_LI32(r_scratch1, K);
 			PPC_DIVWU(r_A, r_A, r_scratch1);
 			break;
 		case BPF_ALU | BPF_AND | BPF_X:
 			ctx->seen |= SEEN_XREG;
 			PPC_AND(r_A, r_A, r_X);
 			break;
 		case BPF_ALU | BPF_AND | BPF_K:
 			if (!IMM_H(K))
 				PPC_ANDI(r_A, r_A, K);
 			else {
 				PPC_LI32(r_scratch1, K);
 				PPC_AND(r_A, r_A, r_scratch1);
 			}
 			break;
 		case BPF_ALU | BPF_OR | BPF_X:
 			ctx->seen |= SEEN_XREG;
 			PPC_OR(r_A, r_A, r_X);
 			break;
 		case BPF_ALU | BPF_OR | BPF_K:
 			if (IMM_L(K))
 				PPC_ORI(r_A, r_A, IMM_L(K));
 			if (K >= 65536)
 				PPC_ORIS(r_A, r_A, IMM_H(K));
 			break;
 		case BPF_ANC | SKF_AD_ALU_XOR_X:
 		case BPF_ALU | BPF_XOR | BPF_X: /* A ^= X */
 			ctx->seen |= SEEN_XREG;
 			PPC_XOR(r_A, r_A, r_X);
 			break;
 		case BPF_ALU | BPF_XOR | BPF_K: /* A ^= K */
 			if (IMM_L(K))
 				PPC_XORI(r_A, r_A, IMM_L(K));
 			if (K >= 65536)
 				PPC_XORIS(r_A, r_A, IMM_H(K));
 			break;
 		case BPF_ALU | BPF_LSH | BPF_X: /* A <<= X; */
 			ctx->seen |= SEEN_XREG;
 			PPC_SLW(r_A, r_A, r_X);
 			break;
 		case BPF_ALU | BPF_LSH | BPF_K:
 			if (K == 0)
 				break;
 			else
 				PPC_SLWI(r_A, r_A, K);
 			break;
 		case BPF_ALU | BPF_RSH | BPF_X: /* A >>= X; */
 			ctx->seen |= SEEN_XREG;
 			PPC_SRW(r_A, r_A, r_X);
 			break;
 		case BPF_ALU | BPF_RSH | BPF_K: /* A >>= K; */
 			if (K == 0)
 				break;
 			else
 				PPC_SRWI(r_A, r_A, K);
 			break;
 		case BPF_ALU | BPF_NEG:
 			PPC_NEG(r_A, r_A);
 			break;
 		case BPF_RET | BPF_K:
 			PPC_LI32(r_ret, K);
 			if (!K) {
 				if (ctx->pc_ret0 == -1)
 					ctx->pc_ret0 = i;
 			}
 			/*
 			 * If this isn't the very last instruction, branch to
 			 * the epilogue if we've stuff to clean up.  Otherwise,
 			 * if there's nothing to tidy, just return.  If we /are/
 			 * the last instruction, we're about to fall through to
 			 * the epilogue to return.
 			 */
 			if (i != flen - 1) {
 				/*
 				 * Note: 'seen' is properly valid only on pass
 				 * #2.	Both parts of this conditional are the
 				 * same instruction size though, meaning the
 				 * first pass will still correctly determine the
 				 * code size/addresses.
 				 */
 				if (ctx->seen)
 					PPC_JMP(exit_addr);
 				else
 					PPC_BLR();
 			}
 			break;
 		case BPF_RET | BPF_A:
 			PPC_MR(r_ret, r_A);
 			if (i != flen - 1) {
 				if (ctx->seen)
 					PPC_JMP(exit_addr);
 				else
 					PPC_BLR();
 			}
 			break;
 		case BPF_MISC | BPF_TAX: /* X = A */
 			PPC_MR(r_X, r_A);
 			break;
 		case BPF_MISC | BPF_TXA: /* A = X */
 			ctx->seen |= SEEN_XREG;
 			PPC_MR(r_A, r_X);
 			break;

 			/*** Constant loads/M[] access ***/
 		case BPF_LD | BPF_IMM: /* A = K */
 			PPC_LI32(r_A, K);
 			break;
 		case BPF_LDX | BPF_IMM: /* X = K */
 			PPC_LI32(r_X, K);
 			break;
 		case BPF_LD | BPF_MEM: /* A = mem[K] */
 			PPC_MR(r_A, r_M + (K & 0xf));
 			ctx->seen |= SEEN_MEM | (1<<(K & 0xf));
 			break;
 		case BPF_LDX | BPF_MEM: /* X = mem[K] */
 			PPC_MR(r_X, r_M + (K & 0xf));
 			ctx->seen |= SEEN_MEM | (1<<(K & 0xf));
 			break;
 		case BPF_ST: /* mem[K] = A */
 			PPC_MR(r_M + (K & 0xf), r_A);
 			ctx->seen |= SEEN_MEM | (1<<(K & 0xf));
 			break;
 		case BPF_STX: /* mem[K] = X */
 			PPC_MR(r_M + (K & 0xf), r_X);
 			ctx->seen |= SEEN_XREG | SEEN_MEM | (1<<(K & 0xf));
 			break;
 		case BPF_LD | BPF_W | BPF_LEN: /*	A = skb->len; */
 			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
 			PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, len));
 			break;
 		case BPF_LDX | BPF_W | BPF_ABS: /* A = *((u32 *)(seccomp_data + K)); */
 			PPC_LWZ_OFFS(r_A, r_skb, K);
 			break;
 		case BPF_LDX | BPF_W | BPF_LEN: /* X = skb->len; */
 			PPC_LWZ_OFFS(r_X, r_skb, offsetof(struct sk_buff, len));
 			break;

 			/*** Ancillary info loads ***/
 		case BPF_ANC | SKF_AD_PROTOCOL: /* A = ntohs(skb->protocol); */
 			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
 						  protocol) != 2);
 			PPC_NTOHS_OFFS(r_A, r_skb, offsetof(struct sk_buff,
 							    protocol));
 			break;
 		case BPF_ANC | SKF_AD_IFINDEX:
 		case BPF_ANC | SKF_AD_HATYPE:
 			BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
 						ifindex) != 4);
 			BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
 						type) != 2);
 			PPC_LL_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff,
 								dev));
 			PPC_CMPDI(r_scratch1, 0);
 			if (ctx->pc_ret0 != -1) {
 				PPC_BCC(COND_EQ, addrs[ctx->pc_ret0]);
 			} else {
 				/* Exit, returning 0; first pass hits here. */
 				PPC_BCC_SHORT(COND_NE, ctx->idx * 4 + 12);
 				PPC_LI(r_ret, 0);
 				PPC_JMP(exit_addr);
 			}
 			if (code == (BPF_ANC | SKF_AD_IFINDEX)) {
 				PPC_LWZ_OFFS(r_A, r_scratch1,
 				     offsetof(struct net_device, ifindex));
 			} else {
 				PPC_LHZ_OFFS(r_A, r_scratch1,
 				     offsetof(struct net_device, type));
 			}

 			break;
 		case BPF_ANC | SKF_AD_MARK:
 			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
 			PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
 							  mark));
 			break;
 		case BPF_ANC | SKF_AD_RXHASH:
 			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, hash) != 4);
 			PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
 							  hash));
 			break;
 		case BPF_ANC | SKF_AD_VLAN_TAG:
 		case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
 			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, vlan_tci) != 2);
 			BUILD_BUG_ON(VLAN_TAG_PRESENT != 0x1000);

 			PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
 							  vlan_tci));
 			if (code == (BPF_ANC | SKF_AD_VLAN_TAG)) {
 				PPC_ANDI(r_A, r_A, ~VLAN_TAG_PRESENT);
 			} else {
 				PPC_ANDI(r_A, r_A, VLAN_TAG_PRESENT);
 				PPC_SRWI(r_A, r_A, 12);
 			}
 			break;
 		case BPF_ANC | SKF_AD_QUEUE:
 			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
 						  queue_mapping) != 2);
 			PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
 							  queue_mapping));
 			break;
 		case BPF_ANC | SKF_AD_PKTTYPE:
 			PPC_LBZ_OFFS(r_A, r_skb, PKT_TYPE_OFFSET());
 			PPC_ANDI(r_A, r_A, PKT_TYPE_MAX);
 			PPC_SRWI(r_A, r_A, 5);
 			break;
 		case BPF_ANC | SKF_AD_CPU:
 			PPC_BPF_LOAD_CPU(r_A);
 			break;
 			/*** Absolute loads from packet header/data ***/
 		case BPF_LD | BPF_W | BPF_ABS:
 			func = CHOOSE_LOAD_FUNC(K, sk_load_word);
 			goto common_load;
 		case BPF_LD | BPF_H | BPF_ABS:
 			func = CHOOSE_LOAD_FUNC(K, sk_load_half);
 			goto common_load;
 		case BPF_LD | BPF_B | BPF_ABS:
 			func = CHOOSE_LOAD_FUNC(K, sk_load_byte);
 		common_load:
 			/* Load from [K]. */
 			ctx->seen |= SEEN_DATAREF;
 			PPC_FUNC_ADDR(r_scratch1, func);
 			PPC_MTLR(r_scratch1);
 			PPC_LI32(r_addr, K);
 			PPC_BLRL();
 			/*
 			 * Helper returns 'lt' condition on error, and an
 			 * appropriate return value in r3
 			 */
 			PPC_BCC(COND_LT, exit_addr);
 			break;

 			/*** Indirect loads from packet header/data ***/
 		case BPF_LD | BPF_W | BPF_IND:
 			func = sk_load_word;
 			goto common_load_ind;
 		case BPF_LD | BPF_H | BPF_IND:
 			func = sk_load_half;
 			goto common_load_ind;
 		case BPF_LD | BPF_B | BPF_IND:
 			func = sk_load_byte;
 		common_load_ind:
 			/*
 			 * Load from [X + K].  Negative offsets are tested for
 			 * in the helper functions.
 			 */
 			ctx->seen |= SEEN_DATAREF | SEEN_XREG;
 			PPC_FUNC_ADDR(r_scratch1, func);
 			PPC_MTLR(r_scratch1);
 			PPC_ADDI(r_addr, r_X, IMM_L(K));
 			if (K >= 32768)
 				PPC_ADDIS(r_addr, r_addr, IMM_HA(K));
 			PPC_BLRL();
 			/* If error, cr0.LT set */
 			PPC_BCC(COND_LT, exit_addr);
 			break;

 		case BPF_LDX | BPF_B | BPF_MSH:
 			func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh);
 			goto common_load;
 			break;

 			/*** Jump and branches ***/
 		case BPF_JMP | BPF_JA:
 			if (K != 0)
 				PPC_JMP(addrs[i + 1 + K]);
 			break;

 		case BPF_JMP | BPF_JGT | BPF_K:
 		case BPF_JMP | BPF_JGT | BPF_X:
 			true_cond = COND_GT;
 			goto cond_branch;
 		case BPF_JMP | BPF_JGE | BPF_K:
 		case BPF_JMP | BPF_JGE | BPF_X:
 			true_cond = COND_GE;
 			goto cond_branch;
 		case BPF_JMP | BPF_JEQ | BPF_K:
 		case BPF_JMP | BPF_JEQ | BPF_X:
 			true_cond = COND_EQ;
 			goto cond_branch;
 		case BPF_JMP | BPF_JSET | BPF_K:
 		case BPF_JMP | BPF_JSET | BPF_X:
 			true_cond = COND_NE;
 			/* Fall through */
 		cond_branch:
 			/* same targets, can avoid doing the test :) */
 			if (filter[i].jt == filter[i].jf) {
 				if (filter[i].jt > 0)
 					PPC_JMP(addrs[i + 1 + filter[i].jt]);
 				break;
 			}

 			switch (code) {
 			case BPF_JMP | BPF_JGT | BPF_X:
 			case BPF_JMP | BPF_JGE | BPF_X:
 			case BPF_JMP | BPF_JEQ | BPF_X:
 				ctx->seen |= SEEN_XREG;
 				PPC_CMPLW(r_A, r_X);
 				break;
 			case BPF_JMP | BPF_JSET | BPF_X:
 				ctx->seen |= SEEN_XREG;
 				PPC_AND_DOT(r_scratch1, r_A, r_X);
 				break;
 			case BPF_JMP | BPF_JEQ | BPF_K:
 			case BPF_JMP | BPF_JGT | BPF_K:
 			case BPF_JMP | BPF_JGE | BPF_K:
 				if (K < 32768)
 					PPC_CMPLWI(r_A, K);
 				else {
 					PPC_LI32(r_scratch1, K);
 					PPC_CMPLW(r_A, r_scratch1);
 				}
 				break;
 			case BPF_JMP | BPF_JSET | BPF_K:
 				if (K < 32768)
 					/* PPC_ANDI is /only/ dot-form */
 					PPC_ANDI(r_scratch1, r_A, K);
 				else {
 					PPC_LI32(r_scratch1, K);
 					PPC_AND_DOT(r_scratch1, r_A,
 						    r_scratch1);
 				}
 				break;
 			}
 			/* Sometimes branches are constructed "backward", with
 			 * the false path being the branch and true path being
 			 * a fallthrough to the next instruction.
 			 */
 			if (filter[i].jt == 0)
 				/* Swap the sense of the branch */
 				PPC_BCC(true_cond ^ COND_CMP_TRUE,
 					addrs[i + 1 + filter[i].jf]);
 			else {
 				PPC_BCC(true_cond, addrs[i + 1 + filter[i].jt]);
 				if (filter[i].jf != 0)
 					PPC_JMP(addrs[i + 1 + filter[i].jf]);
 			}
 			break;
 		default:
 			/* The filter contains something cruel & unusual.
 			 * We don't handle it, but also there shouldn't be
 			 * anything missing from our list.
 			 */
 			if (printk_ratelimit())
 				pr_err("BPF filter opcode %04x (@%d) unsupported\n",
 				       filter[i].code, i);
 			return -ENOTSUPP;
 		}

 	}
 	/* Set end-of-body-code address for exit. */
 	addrs[i] = ctx->idx * 4;

 	return 0;
 }

 void bpf_jit_compile(struct bpf_prog *fp)
 {
 	unsigned int proglen;
 	unsigned int alloclen;
 	u32 *image = NULL;
 	u32 *code_base;
 	unsigned int *addrs;
 	struct codegen_context cgctx;
 	int pass;
 	int flen = fp->len;

 	if (!bpf_jit_enable)
 		return;

 	addrs = kzalloc((flen+1) * sizeof(*addrs), GFP_KERNEL);
 	if (addrs == NULL)
 		return;

 	/*
 	 * There are multiple assembly passes as the generated code will change
 	 * size as it settles down, figuring out the max branch offsets/exit
 	 * paths required.
 	 *
 	 * The range of standard conditional branches is +/- 32Kbytes.	Since
 	 * BPF_MAXINSNS = 4096, we can only jump from (worst case) start to
 	 * finish with 8 bytes/instruction.  Not feasible, so long jumps are
 	 * used, distinct from short branches.
 	 *
 	 * Current:
 	 *
 	 * For now, both branch types assemble to 2 words (short branches padded
 	 * with a NOP); this is less efficient, but assembly will always complete
 	 * after exactly 3 passes:
 	 *
 	 * First pass: No code buffer; Program is "faux-generated" -- no code
 	 * emitted but maximum size of output determined (and addrs[] filled
 	 * in).	 Also, we note whether we use M[], whether we use skb data, etc.
 	 * All generation choices assumed to be 'worst-case', e.g. branches all
 	 * far (2 instructions), return path code reduction not available, etc.
 	 *
 	 * Second pass: Code buffer allocated with size determined previously.
 	 * Prologue generated to support features we have seen used.  Exit paths
 	 * determined and addrs[] is filled in again, as code may be slightly
 	 * smaller as a result.
 	 *
 	 * Third pass: Code generated 'for real', and branch destinations
 	 * determined from now-accurate addrs[] map.
 	 *
 	 * Ideal:
 	 *
 	 * If we optimise this, near branches will be shorter.	On the
 	 * first assembly pass, we should err on the side of caution and
 	 * generate the biggest code.  On subsequent passes, branches will be
 	 * generated short or long and code size will reduce.  With smaller
 	 * code, more branches may fall into the short category, and code will
 	 * reduce more.
 	 *
 	 * Finally, if we see one pass generate code the same size as the
 	 * previous pass we have converged and should now generate code for
 	 * real.  Allocating at the end will also save the memory that would
 	 * otherwise be wasted by the (small) current code shrinkage.
 	 * Preferably, we should do a small number of passes (e.g. 5) and if we
 	 * haven't converged by then, get impatient and force code to generate
 	 * as-is, even if the odd branch would be left long.  The chances of a
 	 * long jump are tiny with all but the most enormous of BPF filter
 	 * inputs, so we should usually converge on the third pass.
 	 */

 	cgctx.idx = 0;
 	cgctx.seen = 0;
 	cgctx.pc_ret0 = -1;
 	/* Scouting faux-generate pass 0 */
 	if (bpf_jit_build_body(fp, 0, &cgctx, addrs))
 		/* We hit something illegal or unsupported. */
 		goto out;

 	/*
 	 * Pretend to build prologue, given the features we've seen.  This will
 	 * update ctgtx.idx as it pretends to output instructions, then we can
 	 * calculate total size from idx.
 	 */
 	bpf_jit_build_prologue(fp, 0, &cgctx);
 	bpf_jit_build_epilogue(0, &cgctx);

 	proglen = cgctx.idx * 4;
 	alloclen = proglen + FUNCTION_DESCR_SIZE;
 	image = module_alloc(alloclen);
 	if (!image)
 		goto out;

 	code_base = image + (FUNCTION_DESCR_SIZE/4);

 	/* Code generation passes 1-2 */
 	for (pass = 1; pass < 3; pass++) {
 		/* Now build the prologue, body code & epilogue for real. */
 		cgctx.idx = 0;
 		bpf_jit_build_prologue(fp, code_base, &cgctx);
 		bpf_jit_build_body(fp, code_base, &cgctx, addrs);
 		bpf_jit_build_epilogue(code_base, &cgctx);

 		if (bpf_jit_enable > 1)
 			pr_info("Pass %d: shrink = %d, seen = 0x%x\n", pass,
 				proglen - (cgctx.idx * 4), cgctx.seen);
 	}

 	if (bpf_jit_enable > 1)
 		/* Note that we output the base address of the code_base
 		 * rather than image, since opcodes are in code_base.
 		 */
 		bpf_jit_dump(flen, proglen, pass, code_base);

 	bpf_flush_icache(code_base, code_base + (proglen/4));

 #ifdef CONFIG_PPC64
 	/* Function descriptor nastiness: Address + TOC */
 	((u64 *)image)[0] = (u64)code_base;
 	((u64 *)image)[1] = local_paca->kernel_toc;
 #endif

 	fp->bpf_func = (void *)image;
 	fp->jited = 1;

 out:
 	kfree(addrs);
 	return;
 }

 void bpf_jit_free(struct bpf_prog *fp)
 {
 	if (fp->jited)
 		module_memfree(fp->bpf_func);

 	bpf_prog_unlock_free(fp);
 }
	/* bpf_jit_comp.c: BPF JIT compiler
	*
	* Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation
	*
	* Based on the x86 BPF compiler, by Eric Dumazet (eric.dumazet@gmail.com)
	* Ported to ppc32 by Denis Kirjanov <kda@linux-powerpc.org>
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; version 2
	* of the License.
	*/
	#include <linux/moduleloader.h>
	#include <asm/cacheflush.h>
	#include <linux/netdevice.h>
	#include <linux/filter.h>
	#include <linux/if_vlan.h>

	#include "bpf_jit32.h"

	static inline void bpf_flush_icache(void start, void end)
	{
	smp_wmb();
	flush_icache_range((unsigned long)start, (unsigned long)end);
	}

	static void bpf_jit_build_prologue(struct bpf_prog fp, u32 image,
	struct codegen_context *ctx)
	{
	int i;
	const struct sock_filter *filter = fp->insns;

	if (ctx->seen & (SEEN_MEM \| SEEN_DATAREF)) {
	/* Make stackframe */
	if (ctx->seen & SEEN_DATAREF) {
	/* If we call any helpers (for loads), save LR */
	EMIT(PPC_INST_MFLR \| __PPC_RT(R0));
	PPC_BPF_STL(0, 1, PPC_LR_STKOFF);

	/* Back up non-volatile regs. */
	PPC_BPF_STL(r_D, 1, -(REG_SZ*(32-r_D)));
	PPC_BPF_STL(r_HL, 1, -(REG_SZ*(32-r_HL)));
	}
	if (ctx->seen & SEEN_MEM) {
	/*
	* Conditionally save regs r15-r31 as some will be used
	* for M[] data.
	*/
	for (i = r_M; i < (r_M+16); i++) {
	if (ctx->seen & (1 << (i-r_M)))
	PPC_BPF_STL(i, 1, -(REG_SZ*(32-i)));
	}
	}
	PPC_BPF_STLU(1, 1, -BPF_PPC_STACKFRAME);
	}

	if (ctx->seen & SEEN_DATAREF) {
	/*
	* If this filter needs to access skb data,
	* prepare r_D and r_HL:
	* r_HL = skb->len - skb->data_len
	* r_D = skb->data
	*/
	PPC_LWZ_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff,
	data_len));
	PPC_LWZ_OFFS(r_HL, r_skb, offsetof(struct sk_buff, len));
	PPC_SUB(r_HL, r_HL, r_scratch1);
	PPC_LL_OFFS(r_D, r_skb, offsetof(struct sk_buff, data));
	}

	if (ctx->seen & SEEN_XREG) {
	/*
	* TODO: Could also detect whether first instr. sets X and
	* avoid this (as below, with A).
	*/
	PPC_LI(r_X, 0);
	}

	/* make sure we dont leak kernel information to user */
	if (bpf_needs_clear_a(&filter[0]))
	PPC_LI(r_A, 0);
	}

	static void bpf_jit_build_epilogue(u32 image, struct codegen_context ctx)
	{
	int i;

	if (ctx->seen & (SEEN_MEM \| SEEN_DATAREF)) {
	PPC_ADDI(1, 1, BPF_PPC_STACKFRAME);
	if (ctx->seen & SEEN_DATAREF) {
	PPC_BPF_LL(0, 1, PPC_LR_STKOFF);
	PPC_MTLR(0);
	PPC_BPF_LL(r_D, 1, -(REG_SZ*(32-r_D)));
	PPC_BPF_LL(r_HL, 1, -(REG_SZ*(32-r_HL)));
	}
	if (ctx->seen & SEEN_MEM) {
	/* Restore any saved non-vol registers */
	for (i = r_M; i < (r_M+16); i++) {
	if (ctx->seen & (1 << (i-r_M)))
	PPC_BPF_LL(i, 1, -(REG_SZ*(32-i)));
	}
	}
	}
	/* The RETs have left a return value in R3. */

	PPC_BLR();
	}

	#define CHOOSE_LOAD_FUNC(K, func) \
	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)

	/* Assemble the body code between the prologue & epilogue. */
	static int bpf_jit_build_body(struct bpf_prog fp, u32 image,
	struct codegen_context *ctx,
	unsigned int *addrs)
	{
	const struct sock_filter *filter = fp->insns;
	int flen = fp->len;
	u8 *func;
	unsigned int true_cond;
	int i;

	/* Start of epilogue code */
	unsigned int exit_addr = addrs[flen];

	for (i = 0; i < flen; i++) {
	unsigned int K = filter[i].k;
	u16 code = bpf_anc_helper(&filter[i]);

	/*
	* addrs[] maps a BPF bytecode address into a real offset from
	* the start of the body code.
	*/
	addrs[i] = ctx->idx * 4;

	switch (code) {
	/* ALU ops */
	case BPF_ALU \| BPF_ADD \| BPF_X: /* A += X; */
	ctx->seen \|= SEEN_XREG;
	PPC_ADD(r_A, r_A, r_X);
	break;
	case BPF_ALU \| BPF_ADD \| BPF_K: /* A += K; */
	if (!K)
	break;
	PPC_ADDI(r_A, r_A, IMM_L(K));
	if (K >= 32768)
	PPC_ADDIS(r_A, r_A, IMM_HA(K));
	break;
	case BPF_ALU \| BPF_SUB \| BPF_X: /* A -= X; */
	ctx->seen \|= SEEN_XREG;
	PPC_SUB(r_A, r_A, r_X);
	break;
	case BPF_ALU \| BPF_SUB \| BPF_K: /* A -= K */
	if (!K)
	break;
	PPC_ADDI(r_A, r_A, IMM_L(-K));
	if (K >= 32768)
	PPC_ADDIS(r_A, r_A, IMM_HA(-K));
	break;
	case BPF_ALU \| BPF_MUL \| BPF_X: /* A = X; /
	ctx->seen \|= SEEN_XREG;
	PPC_MULW(r_A, r_A, r_X);
	break;
	case BPF_ALU \| BPF_MUL \| BPF_K: /* A = K /
	if (K < 32768)
	PPC_MULI(r_A, r_A, K);
	else {
	PPC_LI32(r_scratch1, K);
	PPC_MULW(r_A, r_A, r_scratch1);
	}
	break;
	case BPF_ALU \| BPF_MOD \| BPF_X: /* A %= X; */
	case BPF_ALU \| BPF_DIV \| BPF_X: /* A /= X; */
	ctx->seen \|= SEEN_XREG;
	PPC_CMPWI(r_X, 0);
	if (ctx->pc_ret0 != -1) {
	PPC_BCC(COND_EQ, addrs[ctx->pc_ret0]);
	} else {
	PPC_BCC_SHORT(COND_NE, (ctx->idx*4)+12);
	PPC_LI(r_ret, 0);
	PPC_JMP(exit_addr);
	}
	if (code == (BPF_ALU \| BPF_MOD \| BPF_X)) {
	PPC_DIVWU(r_scratch1, r_A, r_X);
	PPC_MULW(r_scratch1, r_X, r_scratch1);
	PPC_SUB(r_A, r_A, r_scratch1);
	} else {
	PPC_DIVWU(r_A, r_A, r_X);
	}
	break;
	case BPF_ALU \| BPF_MOD \| BPF_K: /* A %= K; */
	PPC_LI32(r_scratch2, K);
	PPC_DIVWU(r_scratch1, r_A, r_scratch2);
	PPC_MULW(r_scratch1, r_scratch2, r_scratch1);
	PPC_SUB(r_A, r_A, r_scratch1);
	break;
	case BPF_ALU \| BPF_DIV \| BPF_K: /* A /= K */
	if (K == 1)
	break;
	PPC_LI32(r_scratch1, K);
	PPC_DIVWU(r_A, r_A, r_scratch1);
	break;
	case BPF_ALU \| BPF_AND \| BPF_X:
	ctx->seen \|= SEEN_XREG;
	PPC_AND(r_A, r_A, r_X);
	break;
	case BPF_ALU \| BPF_AND \| BPF_K:
	if (!IMM_H(K))
	PPC_ANDI(r_A, r_A, K);
	else {
	PPC_LI32(r_scratch1, K);
	PPC_AND(r_A, r_A, r_scratch1);
	}
	break;
	case BPF_ALU \| BPF_OR \| BPF_X:
	ctx->seen \|= SEEN_XREG;
	PPC_OR(r_A, r_A, r_X);
	break;
	case BPF_ALU \| BPF_OR \| BPF_K:
	if (IMM_L(K))
	PPC_ORI(r_A, r_A, IMM_L(K));
	if (K >= 65536)
	PPC_ORIS(r_A, r_A, IMM_H(K));
	break;
	case BPF_ANC \| SKF_AD_ALU_XOR_X:
	case BPF_ALU \| BPF_XOR \| BPF_X: /* A ^= X */
	ctx->seen \|= SEEN_XREG;
	PPC_XOR(r_A, r_A, r_X);
	break;
	case BPF_ALU \| BPF_XOR \| BPF_K: /* A ^= K */
	if (IMM_L(K))
	PPC_XORI(r_A, r_A, IMM_L(K));
	if (K >= 65536)
	PPC_XORIS(r_A, r_A, IMM_H(K));
	break;
	case BPF_ALU \| BPF_LSH \| BPF_X: /* A <<= X; */
	ctx->seen \|= SEEN_XREG;
	PPC_SLW(r_A, r_A, r_X);
	break;
	case BPF_ALU \| BPF_LSH \| BPF_K:
	if (K == 0)
	break;
	else
	PPC_SLWI(r_A, r_A, K);
	break;
	case BPF_ALU \| BPF_RSH \| BPF_X: /* A >>= X; */
	ctx->seen \|= SEEN_XREG;
	PPC_SRW(r_A, r_A, r_X);
	break;
	case BPF_ALU \| BPF_RSH \| BPF_K: /* A >>= K; */
	if (K == 0)
	break;
	else
	PPC_SRWI(r_A, r_A, K);
	break;
	case BPF_ALU \| BPF_NEG:
	PPC_NEG(r_A, r_A);
	break;
	case BPF_RET \| BPF_K:
	PPC_LI32(r_ret, K);
	if (!K) {
	if (ctx->pc_ret0 == -1)
	ctx->pc_ret0 = i;
	}
	/*
	* If this isn't the very last instruction, branch to
	* the epilogue if we've stuff to clean up. Otherwise,
	* if there's nothing to tidy, just return. If we /are/
	* the last instruction, we're about to fall through to
	* the epilogue to return.
	*/
	if (i != flen - 1) {
	/*
	* Note: 'seen' is properly valid only on pass
	* #2. Both parts of this conditional are the
	* same instruction size though, meaning the
	* first pass will still correctly determine the
	* code size/addresses.
	*/
	if (ctx->seen)
	PPC_JMP(exit_addr);
	else
	PPC_BLR();
	}
	break;
	case BPF_RET \| BPF_A:
	PPC_MR(r_ret, r_A);
	if (i != flen - 1) {
	if (ctx->seen)
	PPC_JMP(exit_addr);
	else
	PPC_BLR();
	}
	break;
	case BPF_MISC \| BPF_TAX: /* X = A */
	PPC_MR(r_X, r_A);
	break;
	case BPF_MISC \| BPF_TXA: /* A = X */
	ctx->seen \|= SEEN_XREG;
	PPC_MR(r_A, r_X);
	break;

	/* Constant loads/M[] access */
	case BPF_LD \| BPF_IMM: /* A = K */
	PPC_LI32(r_A, K);
	break;
	case BPF_LDX \| BPF_IMM: /* X = K */
	PPC_LI32(r_X, K);
	break;
	case BPF_LD \| BPF_MEM: /* A = mem[K] */
	PPC_MR(r_A, r_M + (K & 0xf));
	ctx->seen \|= SEEN_MEM \| (1<<(K & 0xf));
	break;
	case BPF_LDX \| BPF_MEM: /* X = mem[K] */
	PPC_MR(r_X, r_M + (K & 0xf));
	ctx->seen \|= SEEN_MEM \| (1<<(K & 0xf));
	break;
	case BPF_ST: /* mem[K] = A */
	PPC_MR(r_M + (K & 0xf), r_A);
	ctx->seen \|= SEEN_MEM \| (1<<(K & 0xf));
	break;
	case BPF_STX: /* mem[K] = X */
	PPC_MR(r_M + (K & 0xf), r_X);
	ctx->seen \|= SEEN_XREG \| SEEN_MEM \| (1<<(K & 0xf));
	break;
	case BPF_LD \| BPF_W \| BPF_LEN: /* A = skb->len; */
	BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
	PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, len));
	break;
	case BPF_LDX \| BPF_W \| BPF_ABS: /* A = ((u32 )(seccomp_data + K)); */
	PPC_LWZ_OFFS(r_A, r_skb, K);
	break;
	case BPF_LDX \| BPF_W \| BPF_LEN: /* X = skb->len; */
	PPC_LWZ_OFFS(r_X, r_skb, offsetof(struct sk_buff, len));
	break;

	/* Ancillary info loads */
	case BPF_ANC \| SKF_AD_PROTOCOL: /* A = ntohs(skb->protocol); */
	BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
	protocol) != 2);
	PPC_NTOHS_OFFS(r_A, r_skb, offsetof(struct sk_buff,
	protocol));
	break;
	case BPF_ANC \| SKF_AD_IFINDEX:
	case BPF_ANC \| SKF_AD_HATYPE:
	BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
	ifindex) != 4);
	BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
	type) != 2);
	PPC_LL_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff,
	dev));
	PPC_CMPDI(r_scratch1, 0);
	if (ctx->pc_ret0 != -1) {
	PPC_BCC(COND_EQ, addrs[ctx->pc_ret0]);
	} else {
	/* Exit, returning 0; first pass hits here. */
	PPC_BCC_SHORT(COND_NE, ctx->idx * 4 + 12);
	PPC_LI(r_ret, 0);
	PPC_JMP(exit_addr);
	}
	if (code == (BPF_ANC \| SKF_AD_IFINDEX)) {
	PPC_LWZ_OFFS(r_A, r_scratch1,
	offsetof(struct net_device, ifindex));
	} else {
	PPC_LHZ_OFFS(r_A, r_scratch1,
	offsetof(struct net_device, type));
	}

	break;
	case BPF_ANC \| SKF_AD_MARK:
	BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
	PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
	mark));
	break;
	case BPF_ANC \| SKF_AD_RXHASH:
	BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, hash) != 4);
	PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
	hash));
	break;
	case BPF_ANC \| SKF_AD_VLAN_TAG:
	case BPF_ANC \| SKF_AD_VLAN_TAG_PRESENT:
	BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, vlan_tci) != 2);
	BUILD_BUG_ON(VLAN_TAG_PRESENT != 0x1000);

	PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
	vlan_tci));
	if (code == (BPF_ANC \| SKF_AD_VLAN_TAG)) {
	PPC_ANDI(r_A, r_A, ~VLAN_TAG_PRESENT);
	} else {
	PPC_ANDI(r_A, r_A, VLAN_TAG_PRESENT);
	PPC_SRWI(r_A, r_A, 12);
	}
	break;
	case BPF_ANC \| SKF_AD_QUEUE:
	BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
	queue_mapping) != 2);
	PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
	queue_mapping));
	break;
	case BPF_ANC \| SKF_AD_PKTTYPE:
	PPC_LBZ_OFFS(r_A, r_skb, PKT_TYPE_OFFSET());
	PPC_ANDI(r_A, r_A, PKT_TYPE_MAX);
	PPC_SRWI(r_A, r_A, 5);
	break;
	case BPF_ANC \| SKF_AD_CPU:
	PPC_BPF_LOAD_CPU(r_A);
	break;
	/* Absolute loads from packet header/data */
	case BPF_LD \| BPF_W \| BPF_ABS:
	func = CHOOSE_LOAD_FUNC(K, sk_load_word);
	goto common_load;
	case BPF_LD \| BPF_H \| BPF_ABS:
	func = CHOOSE_LOAD_FUNC(K, sk_load_half);
	goto common_load;
	case BPF_LD \| BPF_B \| BPF_ABS:
	func = CHOOSE_LOAD_FUNC(K, sk_load_byte);
	common_load:
	/* Load from [K]. */
	ctx->seen \|= SEEN_DATAREF;
	PPC_FUNC_ADDR(r_scratch1, func);
	PPC_MTLR(r_scratch1);
	PPC_LI32(r_addr, K);
	PPC_BLRL();
	/*
	* Helper returns 'lt' condition on error, and an
	* appropriate return value in r3
	*/
	PPC_BCC(COND_LT, exit_addr);
	break;

	/* Indirect loads from packet header/data */
	case BPF_LD \| BPF_W \| BPF_IND:
	func = sk_load_word;
	goto common_load_ind;
	case BPF_LD \| BPF_H \| BPF_IND:
	func = sk_load_half;
	goto common_load_ind;
	case BPF_LD \| BPF_B \| BPF_IND:
	func = sk_load_byte;
	common_load_ind:
	/*
	* Load from [X + K]. Negative offsets are tested for
	* in the helper functions.
	*/
	ctx->seen \|= SEEN_DATAREF \| SEEN_XREG;
	PPC_FUNC_ADDR(r_scratch1, func);
	PPC_MTLR(r_scratch1);
	PPC_ADDI(r_addr, r_X, IMM_L(K));
	if (K >= 32768)
	PPC_ADDIS(r_addr, r_addr, IMM_HA(K));
	PPC_BLRL();
	/* If error, cr0.LT set */
	PPC_BCC(COND_LT, exit_addr);
	break;

	case BPF_LDX \| BPF_B \| BPF_MSH:
	func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh);
	goto common_load;
	break;

	/* Jump and branches */
	case BPF_JMP \| BPF_JA:
	if (K != 0)
	PPC_JMP(addrs[i + 1 + K]);
	break;

	case BPF_JMP \| BPF_JGT \| BPF_K:
	case BPF_JMP \| BPF_JGT \| BPF_X:
	true_cond = COND_GT;
	goto cond_branch;
	case BPF_JMP \| BPF_JGE \| BPF_K:
	case BPF_JMP \| BPF_JGE \| BPF_X:
	true_cond = COND_GE;
	goto cond_branch;
	case BPF_JMP \| BPF_JEQ \| BPF_K:
	case BPF_JMP \| BPF_JEQ \| BPF_X:
	true_cond = COND_EQ;
	goto cond_branch;
	case BPF_JMP \| BPF_JSET \| BPF_K:
	case BPF_JMP \| BPF_JSET \| BPF_X:
	true_cond = COND_NE;
	/* Fall through */
	cond_branch:
	/* same targets, can avoid doing the test :) */
	if (filter[i].jt == filter[i].jf) {
	if (filter[i].jt > 0)
	PPC_JMP(addrs[i + 1 + filter[i].jt]);
	break;
	}

	switch (code) {
	case BPF_JMP \| BPF_JGT \| BPF_X:
	case BPF_JMP \| BPF_JGE \| BPF_X:
	case BPF_JMP \| BPF_JEQ \| BPF_X:
	ctx->seen \|= SEEN_XREG;
	PPC_CMPLW(r_A, r_X);
	break;
	case BPF_JMP \| BPF_JSET \| BPF_X:
	ctx->seen \|= SEEN_XREG;
	PPC_AND_DOT(r_scratch1, r_A, r_X);
	break;
	case BPF_JMP \| BPF_JEQ \| BPF_K:
	case BPF_JMP \| BPF_JGT \| BPF_K:
	case BPF_JMP \| BPF_JGE \| BPF_K:
	if (K < 32768)
	PPC_CMPLWI(r_A, K);
	else {
	PPC_LI32(r_scratch1, K);
	PPC_CMPLW(r_A, r_scratch1);
	}
	break;
	case BPF_JMP \| BPF_JSET \| BPF_K:
	if (K < 32768)
	/* PPC_ANDI is /only/ dot-form */
	PPC_ANDI(r_scratch1, r_A, K);
	else {
	PPC_LI32(r_scratch1, K);
	PPC_AND_DOT(r_scratch1, r_A,
	r_scratch1);
	}
	break;
	}
	/* Sometimes branches are constructed "backward", with
	* the false path being the branch and true path being
	* a fallthrough to the next instruction.
	*/
	if (filter[i].jt == 0)
	/* Swap the sense of the branch */
	PPC_BCC(true_cond ^ COND_CMP_TRUE,
	addrs[i + 1 + filter[i].jf]);
	else {
	PPC_BCC(true_cond, addrs[i + 1 + filter[i].jt]);
	if (filter[i].jf != 0)
	PPC_JMP(addrs[i + 1 + filter[i].jf]);
	}
	break;
	default:
	/* The filter contains something cruel & unusual.
	* We don't handle it, but also there shouldn't be
	* anything missing from our list.
	*/
	if (printk_ratelimit())
	pr_err("BPF filter opcode %04x (@%d) unsupported\n",
	filter[i].code, i);
	return -ENOTSUPP;
	}

	}
	/* Set end-of-body-code address for exit. */
	addrs[i] = ctx->idx * 4;

	return 0;
	}

	void bpf_jit_compile(struct bpf_prog *fp)
	{
	unsigned int proglen;
	unsigned int alloclen;
	u32 *image = NULL;
	u32 *code_base;
	unsigned int *addrs;
	struct codegen_context cgctx;
	int pass;
	int flen = fp->len;

	if (!bpf_jit_enable)
	return;

	addrs = kzalloc((flen+1) * sizeof(*addrs), GFP_KERNEL);
	if (addrs == NULL)
	return;

	/*
	* There are multiple assembly passes as the generated code will change
	* size as it settles down, figuring out the max branch offsets/exit
	* paths required.
	*
	* The range of standard conditional branches is +/- 32Kbytes. Since
	* BPF_MAXINSNS = 4096, we can only jump from (worst case) start to
	* finish with 8 bytes/instruction. Not feasible, so long jumps are
	* used, distinct from short branches.
	*
	* Current:
	*
	* For now, both branch types assemble to 2 words (short branches padded
	* with a NOP); this is less efficient, but assembly will always complete
	* after exactly 3 passes:
	*
	* First pass: No code buffer; Program is "faux-generated" -- no code
	* emitted but maximum size of output determined (and addrs[] filled
	* in). Also, we note whether we use M[], whether we use skb data, etc.
	* All generation choices assumed to be 'worst-case', e.g. branches all
	* far (2 instructions), return path code reduction not available, etc.
	*
	* Second pass: Code buffer allocated with size determined previously.
	* Prologue generated to support features we have seen used. Exit paths
	* determined and addrs[] is filled in again, as code may be slightly
	* smaller as a result.
	*
	* Third pass: Code generated 'for real', and branch destinations
	* determined from now-accurate addrs[] map.
	*
	* Ideal:
	*
	* If we optimise this, near branches will be shorter. On the
	* first assembly pass, we should err on the side of caution and
	* generate the biggest code. On subsequent passes, branches will be
	* generated short or long and code size will reduce. With smaller
	* code, more branches may fall into the short category, and code will
	* reduce more.
	*
	* Finally, if we see one pass generate code the same size as the
	* previous pass we have converged and should now generate code for
	* real. Allocating at the end will also save the memory that would
	* otherwise be wasted by the (small) current code shrinkage.
	* Preferably, we should do a small number of passes (e.g. 5) and if we
	* haven't converged by then, get impatient and force code to generate
	* as-is, even if the odd branch would be left long. The chances of a
	* long jump are tiny with all but the most enormous of BPF filter
	* inputs, so we should usually converge on the third pass.
	*/

	cgctx.idx = 0;
	cgctx.seen = 0;
	cgctx.pc_ret0 = -1;
	/* Scouting faux-generate pass 0 */
	if (bpf_jit_build_body(fp, 0, &cgctx, addrs))
	/* We hit something illegal or unsupported. */
	goto out;

	/*
	* Pretend to build prologue, given the features we've seen. This will
	* update ctgtx.idx as it pretends to output instructions, then we can
	* calculate total size from idx.
	*/
	bpf_jit_build_prologue(fp, 0, &cgctx);
	bpf_jit_build_epilogue(0, &cgctx);

	proglen = cgctx.idx * 4;
	alloclen = proglen + FUNCTION_DESCR_SIZE;
	image = module_alloc(alloclen);
	if (!image)
	goto out;

	code_base = image + (FUNCTION_DESCR_SIZE/4);

	/* Code generation passes 1-2 */
	for (pass = 1; pass < 3; pass++) {
	/* Now build the prologue, body code & epilogue for real. */
	cgctx.idx = 0;
	bpf_jit_build_prologue(fp, code_base, &cgctx);
	bpf_jit_build_body(fp, code_base, &cgctx, addrs);
	bpf_jit_build_epilogue(code_base, &cgctx);

	if (bpf_jit_enable > 1)
	pr_info("Pass %d: shrink = %d, seen = 0x%x\n", pass,
	proglen - (cgctx.idx * 4), cgctx.seen);
	}

	if (bpf_jit_enable > 1)
	/* Note that we output the base address of the code_base
	* rather than image, since opcodes are in code_base.
	*/
	bpf_jit_dump(flen, proglen, pass, code_base);

	bpf_flush_icache(code_base, code_base + (proglen/4));

	#ifdef CONFIG_PPC64
	/* Function descriptor nastiness: Address + TOC */
	((u64 *)image)[0] = (u64)code_base;
	((u64 *)image)[1] = local_paca->kernel_toc;
	#endif

	fp->bpf_func = (void *)image;
	fp->jited = 1;

	out:
	kfree(addrs);
	return;
	}

	void bpf_jit_free(struct bpf_prog *fp)
	{
	if (fp->jited)
	module_memfree(fp->bpf_func);

	bpf_prog_unlock_free(fp);
	}