| /******************************************************************************* |
| * |
| * Module Name: utownerid - Support for Table/Method Owner IDs |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2017, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acnamesp.h" |
| |
| #define _COMPONENT ACPI_UTILITIES |
| ACPI_MODULE_NAME("utownerid") |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_allocate_owner_id |
| * |
| * PARAMETERS: owner_id - Where the new owner ID is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to |
| * track objects created by the table or method, to be deleted |
| * when the method exits or the table is unloaded. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_ut_allocate_owner_id(acpi_owner_id *owner_id) |
| { |
| u32 i; |
| u32 j; |
| u32 k; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(ut_allocate_owner_id); |
| |
| /* Guard against multiple allocations of ID to the same location */ |
| |
| if (*owner_id) { |
| ACPI_ERROR((AE_INFO, |
| "Owner ID [0x%2.2X] already exists", *owner_id)); |
| return_ACPI_STATUS(AE_ALREADY_EXISTS); |
| } |
| |
| /* Mutex for the global ID mask */ |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* |
| * Find a free owner ID, cycle through all possible IDs on repeated |
| * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index |
| * may have to be scanned twice. |
| */ |
| for (i = 0, j = acpi_gbl_last_owner_id_index; |
| i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) { |
| if (j >= ACPI_NUM_OWNERID_MASKS) { |
| j = 0; /* Wraparound to start of mask array */ |
| } |
| |
| for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) { |
| if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) { |
| |
| /* There are no free IDs in this mask */ |
| |
| break; |
| } |
| |
| if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) { |
| /* |
| * Found a free ID. The actual ID is the bit index plus one, |
| * making zero an invalid Owner ID. Save this as the last ID |
| * allocated and update the global ID mask. |
| */ |
| acpi_gbl_owner_id_mask[j] |= (1 << k); |
| |
| acpi_gbl_last_owner_id_index = (u8)j; |
| acpi_gbl_next_owner_id_offset = (u8)(k + 1); |
| |
| /* |
| * Construct encoded ID from the index and bit position |
| * |
| * Note: Last [j].k (bit 255) is never used and is marked |
| * permanently allocated (prevents +1 overflow) |
| */ |
| *owner_id = |
| (acpi_owner_id)((k + 1) + ACPI_MUL_32(j)); |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_VALUES, |
| "Allocated OwnerId: %2.2X\n", |
| (unsigned int)*owner_id)); |
| goto exit; |
| } |
| } |
| |
| acpi_gbl_next_owner_id_offset = 0; |
| } |
| |
| /* |
| * All owner_ids have been allocated. This typically should |
| * not happen since the IDs are reused after deallocation. The IDs are |
| * allocated upon table load (one per table) and method execution, and |
| * they are released when a table is unloaded or a method completes |
| * execution. |
| * |
| * If this error happens, there may be very deep nesting of invoked |
| * control methods, or there may be a bug where the IDs are not released. |
| */ |
| status = AE_OWNER_ID_LIMIT; |
| ACPI_ERROR((AE_INFO, |
| "Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT")); |
| |
| exit: |
| (void)acpi_ut_release_mutex(ACPI_MTX_CACHES); |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_release_owner_id |
| * |
| * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_ID |
| * |
| * RETURN: None. No error is returned because we are either exiting a |
| * control method or unloading a table. Either way, we would |
| * ignore any error anyway. |
| * |
| * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255 |
| * |
| ******************************************************************************/ |
| |
| void acpi_ut_release_owner_id(acpi_owner_id *owner_id_ptr) |
| { |
| acpi_owner_id owner_id = *owner_id_ptr; |
| acpi_status status; |
| u32 index; |
| u32 bit; |
| |
| ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id); |
| |
| /* Always clear the input owner_id (zero is an invalid ID) */ |
| |
| *owner_id_ptr = 0; |
| |
| /* Zero is not a valid owner_ID */ |
| |
| if (owner_id == 0) { |
| ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id)); |
| return_VOID; |
| } |
| |
| /* Mutex for the global ID mask */ |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES); |
| if (ACPI_FAILURE(status)) { |
| return_VOID; |
| } |
| |
| /* Normalize the ID to zero */ |
| |
| owner_id--; |
| |
| /* Decode ID to index/offset pair */ |
| |
| index = ACPI_DIV_32(owner_id); |
| bit = 1 << ACPI_MOD_32(owner_id); |
| |
| /* Free the owner ID only if it is valid */ |
| |
| if (acpi_gbl_owner_id_mask[index] & bit) { |
| acpi_gbl_owner_id_mask[index] ^= bit; |
| } else { |
| ACPI_ERROR((AE_INFO, |
| "Release of non-allocated OwnerId: 0x%2.2X", |
| owner_id + 1)); |
| } |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_CACHES); |
| return_VOID; |
| } |