| /* |
| * P5040 Silicon/SoC Device Tree Source (post include) |
| * |
| * Copyright 2012 - 2015 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * This software is provided by Freescale Semiconductor "as is" and any |
| * express or implied warranties, including, but not limited to, the implied |
| * warranties of merchantability and fitness for a particular purpose are |
| * disclaimed. In no event shall Freescale Semiconductor be liable for any |
| * direct, indirect, incidental, special, exemplary, or consequential damages |
| * (including, but not limited to, procurement of substitute goods or services; |
| * loss of use, data, or profits; or business interruption) however caused and |
| * on any theory of liability, whether in contract, strict liability, or tort |
| * (including negligence or otherwise) arising in any way out of the use of this |
| * software, even if advised of the possibility of such damage. |
| */ |
| |
| &bman_fbpr { |
| compatible = "fsl,bman-fbpr"; |
| alloc-ranges = <0 0 0x10000 0>; |
| }; |
| |
| &qman_fqd { |
| compatible = "fsl,qman-fqd"; |
| alloc-ranges = <0 0 0x10000 0>; |
| }; |
| |
| &qman_pfdr { |
| compatible = "fsl,qman-pfdr"; |
| alloc-ranges = <0 0 0x10000 0>; |
| }; |
| |
| &lbc { |
| compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus"; |
| interrupts = <25 2 0 0>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| }; |
| |
| /* controller at 0x200000 */ |
| &pci0 { |
| compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0x0 0xff>; |
| clock-frequency = <33333333>; |
| interrupts = <16 2 1 15>; |
| fsl,iommu-parent = <&pamu0>; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <16 2 1 15>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 40 1 0 0 |
| 0000 0 0 2 &mpic 1 1 0 0 |
| 0000 0 0 3 &mpic 2 1 0 0 |
| 0000 0 0 4 &mpic 3 1 0 0 |
| >; |
| }; |
| }; |
| |
| /* controller at 0x201000 */ |
| &pci1 { |
| compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0 0xff>; |
| clock-frequency = <33333333>; |
| interrupts = <16 2 1 14>; |
| fsl,iommu-parent = <&pamu0>; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <16 2 1 14>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 41 1 0 0 |
| 0000 0 0 2 &mpic 5 1 0 0 |
| 0000 0 0 3 &mpic 6 1 0 0 |
| 0000 0 0 4 &mpic 7 1 0 0 |
| >; |
| }; |
| }; |
| |
| /* controller at 0x202000 */ |
| &pci2 { |
| compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0x0 0xff>; |
| clock-frequency = <33333333>; |
| interrupts = <16 2 1 13>; |
| fsl,iommu-parent = <&pamu0>; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <16 2 1 13>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 42 1 0 0 |
| 0000 0 0 2 &mpic 9 1 0 0 |
| 0000 0 0 3 &mpic 10 1 0 0 |
| 0000 0 0 4 &mpic 11 1 0 0 |
| >; |
| }; |
| }; |
| |
| &dcsr { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,dcsr", "simple-bus"; |
| |
| dcsr-epu@0 { |
| compatible = "fsl,p5040-dcsr-epu", "fsl,dcsr-epu"; |
| interrupts = <52 2 0 0 |
| 84 2 0 0 |
| 85 2 0 0>; |
| reg = <0x0 0x1000>; |
| }; |
| dcsr-npc { |
| compatible = "fsl,dcsr-npc"; |
| reg = <0x1000 0x1000 0x1000000 0x8000>; |
| }; |
| dcsr-nxc@2000 { |
| compatible = "fsl,dcsr-nxc"; |
| reg = <0x2000 0x1000>; |
| }; |
| dcsr-corenet { |
| compatible = "fsl,dcsr-corenet"; |
| reg = <0x8000 0x1000 0xB0000 0x1000>; |
| }; |
| dcsr-dpaa@9000 { |
| compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa"; |
| reg = <0x9000 0x1000>; |
| }; |
| dcsr-ocn@11000 { |
| compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn"; |
| reg = <0x11000 0x1000>; |
| }; |
| dcsr-ddr@12000 { |
| compatible = "fsl,dcsr-ddr"; |
| dev-handle = <&ddr1>; |
| reg = <0x12000 0x1000>; |
| }; |
| dcsr-ddr@13000 { |
| compatible = "fsl,dcsr-ddr"; |
| dev-handle = <&ddr2>; |
| reg = <0x13000 0x1000>; |
| }; |
| dcsr-nal@18000 { |
| compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal"; |
| reg = <0x18000 0x1000>; |
| }; |
| dcsr-rcpm@22000 { |
| compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm"; |
| reg = <0x22000 0x1000>; |
| }; |
| dcsr-cpu-sb-proxy@40000 { |
| compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| cpu-handle = <&cpu0>; |
| reg = <0x40000 0x1000>; |
| }; |
| dcsr-cpu-sb-proxy@41000 { |
| compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| cpu-handle = <&cpu1>; |
| reg = <0x41000 0x1000>; |
| }; |
| dcsr-cpu-sb-proxy@42000 { |
| compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| cpu-handle = <&cpu2>; |
| reg = <0x42000 0x1000>; |
| }; |
| dcsr-cpu-sb-proxy@43000 { |
| compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| cpu-handle = <&cpu3>; |
| reg = <0x43000 0x1000>; |
| }; |
| }; |
| |
| /include/ "qoriq-bman1-portals.dtsi" |
| |
| /include/ "qoriq-qman1-portals.dtsi" |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| |
| soc-sram-error { |
| compatible = "fsl,soc-sram-error"; |
| interrupts = <16 2 1 29>; |
| }; |
| |
| corenet-law@0 { |
| compatible = "fsl,corenet-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <32>; |
| }; |
| |
| ddr1: memory-controller@8000 { |
| compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; |
| reg = <0x8000 0x1000>; |
| interrupts = <16 2 1 23>; |
| }; |
| |
| ddr2: memory-controller@9000 { |
| compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller"; |
| reg = <0x9000 0x1000>; |
| interrupts = <16 2 1 22>; |
| }; |
| |
| cpc: l3-cache-controller@10000 { |
| compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; |
| reg = <0x10000 0x1000 |
| 0x11000 0x1000>; |
| interrupts = <16 2 1 27 |
| 16 2 1 26>; |
| }; |
| |
| corenet-cf@18000 { |
| compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; |
| reg = <0x18000 0x1000>; |
| interrupts = <16 2 1 31>; |
| fsl,ccf-num-csdids = <32>; |
| fsl,ccf-num-snoopids = <32>; |
| }; |
| |
| iommu@20000 { |
| compatible = "fsl,pamu-v1.0", "fsl,pamu"; |
| reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */ |
| ranges = <0 0x20000 0x5000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupts = <24 2 0 0 |
| 16 2 1 30>; |
| fsl,portid-mapping = <0x0f800000>; |
| |
| pamu0: pamu@0 { |
| reg = <0 0x1000>; |
| fsl,primary-cache-geometry = <32 1>; |
| fsl,secondary-cache-geometry = <128 2>; |
| }; |
| |
| pamu1: pamu@1000 { |
| reg = <0x1000 0x1000>; |
| fsl,primary-cache-geometry = <32 1>; |
| fsl,secondary-cache-geometry = <128 2>; |
| }; |
| |
| pamu2: pamu@2000 { |
| reg = <0x2000 0x1000>; |
| fsl,primary-cache-geometry = <32 1>; |
| fsl,secondary-cache-geometry = <128 2>; |
| }; |
| |
| pamu3: pamu@3000 { |
| reg = <0x3000 0x1000>; |
| fsl,primary-cache-geometry = <32 1>; |
| fsl,secondary-cache-geometry = <128 2>; |
| }; |
| |
| pamu4: pamu@4000 { |
| reg = <0x4000 0x1000>; |
| fsl,primary-cache-geometry = <32 1>; |
| fsl,secondary-cache-geometry = <128 2>; |
| }; |
| }; |
| |
| /include/ "qoriq-mpic.dtsi" |
| |
| guts: global-utilities@e0000 { |
| compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0"; |
| reg = <0xe0000 0xe00>; |
| fsl,has-rstcr; |
| #sleep-cells = <1>; |
| fsl,liodn-bits = <12>; |
| }; |
| |
| pins: global-utilities@e0e00 { |
| compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0"; |
| reg = <0xe0e00 0x200>; |
| #sleep-cells = <2>; |
| }; |
| |
| /include/ "qoriq-clockgen1.dtsi" |
| global-utilities@e1000 { |
| compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0"; |
| |
| mux2: mux2@40 { |
| #clock-cells = <0>; |
| reg = <0x40 0x4>; |
| compatible = "fsl,qoriq-core-mux-1.0"; |
| clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; |
| clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; |
| clock-output-names = "cmux2"; |
| }; |
| |
| mux3: mux3@60 { |
| #clock-cells = <0>; |
| reg = <0x60 0x4>; |
| compatible = "fsl,qoriq-core-mux-1.0"; |
| clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; |
| clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; |
| clock-output-names = "cmux3"; |
| }; |
| }; |
| |
| rcpm: global-utilities@e2000 { |
| compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0"; |
| reg = <0xe2000 0x1000>; |
| #sleep-cells = <1>; |
| }; |
| |
| sfp: sfp@e8000 { |
| compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0"; |
| reg = <0xe8000 0x1000>; |
| }; |
| |
| serdes: serdes@ea000 { |
| compatible = "fsl,p5040-serdes"; |
| reg = <0xea000 0x1000>; |
| }; |
| |
| /include/ "qoriq-dma-0.dtsi" |
| dma@100300 { |
| fsl,iommu-parent = <&pamu0>; |
| fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ |
| }; |
| |
| /include/ "qoriq-dma-1.dtsi" |
| dma@101300 { |
| fsl,iommu-parent = <&pamu0>; |
| fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ |
| }; |
| |
| /include/ "qoriq-espi-0.dtsi" |
| spi@110000 { |
| fsl,espi-num-chipselects = <4>; |
| }; |
| |
| /include/ "qoriq-esdhc-0.dtsi" |
| sdhc@114000 { |
| compatible = "fsl,p5040-esdhc", "fsl,esdhc"; |
| fsl,iommu-parent = <&pamu2>; |
| fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ |
| sdhci,auto-cmd12; |
| }; |
| |
| /include/ "qoriq-i2c-0.dtsi" |
| /include/ "qoriq-i2c-1.dtsi" |
| /include/ "qoriq-duart-0.dtsi" |
| /include/ "qoriq-duart-1.dtsi" |
| /include/ "qoriq-gpio-0.dtsi" |
| /include/ "qoriq-usb2-mph-0.dtsi" |
| usb0: usb@210000 { |
| compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; |
| fsl,iommu-parent = <&pamu4>; |
| fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ |
| phy_type = "utmi"; |
| port0; |
| }; |
| |
| /include/ "qoriq-usb2-dr-0.dtsi" |
| usb1: usb@211000 { |
| compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; |
| fsl,iommu-parent = <&pamu4>; |
| fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ |
| dr_mode = "host"; |
| phy_type = "utmi"; |
| }; |
| |
| /include/ "qoriq-sata2-0.dtsi" |
| sata@220000 { |
| fsl,iommu-parent = <&pamu4>; |
| fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ |
| }; |
| |
| /include/ "qoriq-sata2-1.dtsi" |
| sata@221000 { |
| fsl,iommu-parent = <&pamu4>; |
| fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ |
| }; |
| |
| /include/ "qoriq-sec5.2-0.dtsi" |
| crypto@300000 { |
| fsl,iommu-parent = <&pamu4>; |
| }; |
| |
| /include/ "qoriq-qman1.dtsi" |
| /include/ "qoriq-bman1.dtsi" |
| |
| /include/ "qoriq-fman-0.dtsi" |
| /include/ "qoriq-fman-0-1g-0.dtsi" |
| /include/ "qoriq-fman-0-1g-1.dtsi" |
| /include/ "qoriq-fman-0-1g-2.dtsi" |
| /include/ "qoriq-fman-0-1g-3.dtsi" |
| /include/ "qoriq-fman-0-1g-4.dtsi" |
| /include/ "qoriq-fman-0-10g-0.dtsi" |
| fman@400000 { |
| enet0: ethernet@e0000 { |
| }; |
| |
| enet1: ethernet@e2000 { |
| }; |
| |
| enet2: ethernet@e4000 { |
| }; |
| |
| enet3: ethernet@e6000 { |
| }; |
| |
| enet4: ethernet@e8000 { |
| }; |
| |
| enet5: ethernet@f0000 { |
| }; |
| }; |
| |
| /include/ "qoriq-fman-1.dtsi" |
| /include/ "qoriq-fman-1-1g-0.dtsi" |
| /include/ "qoriq-fman-1-1g-1.dtsi" |
| /include/ "qoriq-fman-1-1g-2.dtsi" |
| /include/ "qoriq-fman-1-1g-3.dtsi" |
| /include/ "qoriq-fman-1-1g-4.dtsi" |
| /include/ "qoriq-fman-1-10g-0.dtsi" |
| fman@500000 { |
| enet6: ethernet@e0000 { |
| }; |
| |
| enet7: ethernet@e2000 { |
| }; |
| |
| enet8: ethernet@e4000 { |
| }; |
| |
| enet9: ethernet@e6000 { |
| }; |
| |
| enet10: ethernet@e8000 { |
| }; |
| |
| enet11: ethernet@f0000 { |
| }; |
| }; |
| }; |