| /* |
| * Samsung's Exynos3250 SoC device tree source |
| * |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250 |
| * based board files can include this file and provide values for board specfic |
| * bindings. |
| * |
| * Note: This file does not include device nodes for all the controllers in |
| * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional |
| * nodes can be added to this file. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "exynos4-cpu-thermal.dtsi" |
| #include <dt-bindings/clock/exynos3250.h> |
| |
| / { |
| compatible = "samsung,exynos3250"; |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| pinctrl0 = &pinctrl_0; |
| pinctrl1 = &pinctrl_1; |
| mshc0 = &mshc_0; |
| mshc1 = &mshc_1; |
| spi0 = &spi_0; |
| spi1 = &spi_1; |
| i2c0 = &i2c_0; |
| i2c1 = &i2c_1; |
| i2c2 = &i2c_2; |
| i2c3 = &i2c_3; |
| i2c4 = &i2c_4; |
| i2c5 = &i2c_5; |
| i2c6 = &i2c_6; |
| i2c7 = &i2c_7; |
| serial0 = &serial_0; |
| serial1 = &serial_1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0>; |
| clock-frequency = <1000000000>; |
| clocks = <&cmu CLK_ARM_CLK>; |
| clock-names = "cpu"; |
| #cooling-cells = <2>; |
| |
| operating-points = < |
| 1000000 1150000 |
| 900000 1112500 |
| 800000 1075000 |
| 700000 1037500 |
| 600000 1000000 |
| 500000 962500 |
| 400000 925000 |
| 300000 887500 |
| 200000 850000 |
| 100000 850000 |
| >; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <1>; |
| clock-frequency = <1000000000>; |
| }; |
| }; |
| |
| soc: soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| fixed-rate-clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| xusbxti: clock@0 { |
| compatible = "fixed-clock"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| clock-frequency = <0>; |
| #clock-cells = <0>; |
| clock-output-names = "xusbxti"; |
| }; |
| |
| xxti: clock@1 { |
| compatible = "fixed-clock"; |
| reg = <1>; |
| clock-frequency = <0>; |
| #clock-cells = <0>; |
| clock-output-names = "xxti"; |
| }; |
| |
| xtcxo: clock@2 { |
| compatible = "fixed-clock"; |
| reg = <2>; |
| clock-frequency = <0>; |
| #clock-cells = <0>; |
| clock-output-names = "xtcxo"; |
| }; |
| }; |
| |
| sysram@02020000 { |
| compatible = "mmio-sram"; |
| reg = <0x02020000 0x40000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x02020000 0x40000>; |
| |
| smp-sysram@0 { |
| compatible = "samsung,exynos4210-sysram"; |
| reg = <0x0 0x1000>; |
| }; |
| |
| smp-sysram@3f000 { |
| compatible = "samsung,exynos4210-sysram-ns"; |
| reg = <0x3f000 0x1000>; |
| }; |
| }; |
| |
| chipid@10000000 { |
| compatible = "samsung,exynos4210-chipid"; |
| reg = <0x10000000 0x100>; |
| }; |
| |
| sys_reg: syscon@10010000 { |
| compatible = "samsung,exynos3-sysreg", "syscon"; |
| reg = <0x10010000 0x400>; |
| }; |
| |
| pmu_system_controller: system-controller@10020000 { |
| compatible = "samsung,exynos3250-pmu", "syscon"; |
| reg = <0x10020000 0x4000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| mipi_phy: video-phy@10020710 { |
| compatible = "samsung,s5pv210-mipi-video-phy"; |
| #phy-cells = <1>; |
| syscon = <&pmu_system_controller>; |
| }; |
| |
| pd_cam: cam-power-domain@10023C00 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023C00 0x20>; |
| #power-domain-cells = <0>; |
| }; |
| |
| pd_mfc: mfc-power-domain@10023C40 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023C40 0x20>; |
| #power-domain-cells = <0>; |
| }; |
| |
| pd_g3d: g3d-power-domain@10023C60 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023C60 0x20>; |
| #power-domain-cells = <0>; |
| }; |
| |
| pd_lcd0: lcd0-power-domain@10023C80 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023C80 0x20>; |
| #power-domain-cells = <0>; |
| }; |
| |
| pd_isp: isp-power-domain@10023CA0 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10023CA0 0x20>; |
| #power-domain-cells = <0>; |
| }; |
| |
| cmu: clock-controller@10030000 { |
| compatible = "samsung,exynos3250-cmu"; |
| reg = <0x10030000 0x20000>; |
| #clock-cells = <1>; |
| assigned-clocks = <&cmu CLK_MOUT_ACLK_400_MCUISP_SUB>, |
| <&cmu CLK_MOUT_ACLK_266_SUB>; |
| assigned-clock-parents = <&cmu CLK_FIN_PLL>, |
| <&cmu CLK_FIN_PLL>; |
| }; |
| |
| cmu_dmc: clock-controller@105C0000 { |
| compatible = "samsung,exynos3250-cmu-dmc"; |
| reg = <0x105C0000 0x2000>; |
| #clock-cells = <1>; |
| }; |
| |
| rtc: rtc@10070000 { |
| compatible = "samsung,s3c6410-rtc"; |
| reg = <0x10070000 0x100>; |
| interrupts = <0 73 0>, <0 74 0>; |
| interrupt-parent = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| tmu: tmu@100C0000 { |
| compatible = "samsung,exynos3250-tmu"; |
| reg = <0x100C0000 0x100>; |
| interrupts = <0 216 0>; |
| clocks = <&cmu CLK_TMU_APBIF>; |
| clock-names = "tmu_apbif"; |
| #include "exynos4412-tmu-sensor-conf.dtsi" |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@10481000 { |
| compatible = "arm,cortex-a15-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x10481000 0x1000>, |
| <0x10482000 0x1000>, |
| <0x10484000 0x2000>, |
| <0x10486000 0x2000>; |
| interrupts = <1 9 0xf04>; |
| }; |
| |
| mct@10050000 { |
| compatible = "samsung,exynos4210-mct"; |
| reg = <0x10050000 0x800>; |
| interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, |
| <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; |
| clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; |
| clock-names = "fin_pll", "mct"; |
| }; |
| |
| pinctrl_1: pinctrl@11000000 { |
| compatible = "samsung,exynos3250-pinctrl"; |
| reg = <0x11000000 0x1000>; |
| interrupts = <0 225 0>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynos4210-wakeup-eint"; |
| interrupts = <0 48 0>; |
| }; |
| }; |
| |
| pinctrl_0: pinctrl@11400000 { |
| compatible = "samsung,exynos3250-pinctrl"; |
| reg = <0x11400000 0x1000>; |
| interrupts = <0 240 0>; |
| }; |
| |
| jpeg: codec@11830000 { |
| compatible = "samsung,exynos3250-jpeg"; |
| reg = <0x11830000 0x1000>; |
| interrupts = <0 171 0>; |
| clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>; |
| clock-names = "jpeg", "sclk"; |
| power-domains = <&pd_cam>; |
| assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>; |
| assigned-clock-rates = <0>, <150000000>; |
| assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>; |
| iommus = <&sysmmu_jpeg>; |
| status = "disabled"; |
| }; |
| |
| sysmmu_jpeg: sysmmu@11A60000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11a60000 0x1000>; |
| interrupts = <0 156 0>, <0 161 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>; |
| power-domains = <&pd_cam>; |
| #iommu-cells = <0>; |
| }; |
| |
| fimd: fimd@11c00000 { |
| compatible = "samsung,exynos3250-fimd"; |
| reg = <0x11c00000 0x30000>; |
| interrupt-names = "fifo", "vsync", "lcd_sys"; |
| interrupts = <0 84 0>, <0 85 0>, <0 86 0>; |
| clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; |
| clock-names = "sclk_fimd", "fimd"; |
| power-domains = <&pd_lcd0>; |
| iommus = <&sysmmu_fimd0>; |
| samsung,sysreg = <&sys_reg>; |
| status = "disabled"; |
| }; |
| |
| dsi_0: dsi@11C80000 { |
| compatible = "samsung,exynos3250-mipi-dsi"; |
| reg = <0x11C80000 0x10000>; |
| interrupts = <0 83 0>; |
| samsung,phy-type = <0>; |
| power-domains = <&pd_lcd0>; |
| phys = <&mipi_phy 1>; |
| phy-names = "dsim"; |
| clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>; |
| clock-names = "bus_clk", "pll_clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sysmmu_fimd0: sysmmu@11E20000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11e20000 0x1000>; |
| interrupts = <0 80 0>, <0 81 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; |
| power-domains = <&pd_lcd0>; |
| #iommu-cells = <0>; |
| }; |
| |
| hsotg: hsotg@12480000 { |
| compatible = "snps,dwc2"; |
| reg = <0x12480000 0x20000>; |
| interrupts = <0 141 0>; |
| clocks = <&cmu CLK_USBOTG>; |
| clock-names = "otg"; |
| phys = <&exynos_usbphy 0>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| mshc_0: mshc@12510000 { |
| compatible = "samsung,exynos5420-dw-mshc"; |
| reg = <0x12510000 0x1000>; |
| interrupts = <0 142 0>; |
| clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x80>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| mshc_1: mshc@12520000 { |
| compatible = "samsung,exynos5420-dw-mshc"; |
| reg = <0x12520000 0x1000>; |
| interrupts = <0 143 0>; |
| clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x80>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| exynos_usbphy: exynos-usbphy@125B0000 { |
| compatible = "samsung,exynos3250-usb2-phy"; |
| reg = <0x125B0000 0x100>; |
| samsung,pmureg-phandle = <&pmu_system_controller>; |
| clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>; |
| clock-names = "phy", "ref"; |
| #phy-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| amba { |
| compatible = "arm,amba-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pdma0: pdma@12680000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x12680000 0x1000>; |
| interrupts = <0 138 0>; |
| clocks = <&cmu CLK_PDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| pdma1: pdma@12690000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x12690000 0x1000>; |
| interrupts = <0 139 0>; |
| clocks = <&cmu CLK_PDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| }; |
| |
| adc: adc@126C0000 { |
| compatible = "samsung,exynos3250-adc", |
| "samsung,exynos-adc-v2"; |
| reg = <0x126C0000 0x100>; |
| interrupts = <0 137 0>; |
| clock-names = "adc", "sclk"; |
| clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; |
| #io-channel-cells = <1>; |
| io-channel-ranges; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| mfc: codec@13400000 { |
| compatible = "samsung,mfc-v7"; |
| reg = <0x13400000 0x10000>; |
| interrupts = <0 102 0>; |
| clock-names = "mfc", "sclk_mfc"; |
| clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; |
| power-domains = <&pd_mfc>; |
| iommus = <&sysmmu_mfc>; |
| status = "disabled"; |
| }; |
| |
| sysmmu_mfc: sysmmu@13620000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13620000 0x1000>; |
| interrupts = <0 96 0>, <0 98 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>; |
| power-domains = <&pd_mfc>; |
| #iommu-cells = <0>; |
| }; |
| |
| serial_0: serial@13800000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x13800000 0x100>; |
| interrupts = <0 109 0>; |
| clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_data &uart0_fctl>; |
| status = "disabled"; |
| }; |
| |
| serial_1: serial@13810000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x13810000 0x100>; |
| interrupts = <0 110 0>; |
| clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; |
| clock-names = "uart", "clk_uart_baud0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_data>; |
| status = "disabled"; |
| }; |
| |
| i2c_0: i2c@13860000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x13860000 0x100>; |
| interrupts = <0 113 0>; |
| clocks = <&cmu CLK_I2C0>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_1: i2c@13870000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x13870000 0x100>; |
| interrupts = <0 114 0>; |
| clocks = <&cmu CLK_I2C1>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_2: i2c@13880000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x13880000 0x100>; |
| interrupts = <0 115 0>; |
| clocks = <&cmu CLK_I2C2>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_3: i2c@13890000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x13890000 0x100>; |
| interrupts = <0 116 0>; |
| clocks = <&cmu CLK_I2C3>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_4: i2c@138A0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x138A0000 0x100>; |
| interrupts = <0 117 0>; |
| clocks = <&cmu CLK_I2C4>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_5: i2c@138B0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x138B0000 0x100>; |
| interrupts = <0 118 0>; |
| clocks = <&cmu CLK_I2C5>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_6: i2c@138C0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x138C0000 0x100>; |
| interrupts = <0 119 0>; |
| clocks = <&cmu CLK_I2C6>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_7: i2c@138D0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x138D0000 0x100>; |
| interrupts = <0 120 0>; |
| clocks = <&cmu CLK_I2C7>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c7_bus>; |
| status = "disabled"; |
| }; |
| |
| spi_0: spi@13920000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x13920000 0x100>; |
| interrupts = <0 121 0>; |
| dmas = <&pdma0 7>, <&pdma0 6>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>; |
| clock-names = "spi", "spi_busclk0"; |
| samsung,spi-src-clk = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_bus>; |
| status = "disabled"; |
| }; |
| |
| spi_1: spi@13930000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x13930000 0x100>; |
| interrupts = <0 122 0>; |
| dmas = <&pdma1 7>, <&pdma1 6>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>; |
| clock-names = "spi", "spi_busclk0"; |
| samsung,spi-src-clk = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@13970000 { |
| compatible = "samsung,s3c6410-i2s"; |
| reg = <0x13970000 0x100>; |
| interrupts = <0 126 0>; |
| clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>; |
| clock-names = "iis", "i2s_opclk0"; |
| dmas = <&pdma0 14>, <&pdma0 13>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&i2s2_bus>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@139D0000 { |
| compatible = "samsung,exynos4210-pwm"; |
| reg = <0x139D0000 0x1000>; |
| interrupts = <0 104 0>, <0 105 0>, <0 106 0>, |
| <0 107 0>, <0 108 0>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <0 18 0>, <0 19 0>; |
| }; |
| |
| ppmu_dmc0: ppmu_dmc0@106a0000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x106a0000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| ppmu_dmc1: ppmu_dmc1@106b0000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x106b0000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| ppmu_cpu: ppmu_cpu@106c0000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x106c0000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| ppmu_rightbus: ppmu_rightbus@112a0000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x112a0000 0x2000>; |
| clocks = <&cmu CLK_PPMURIGHT>; |
| clock-names = "ppmu"; |
| status = "disabled"; |
| }; |
| |
| ppmu_leftbus: ppmu_leftbus0@116a0000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x116a0000 0x2000>; |
| clocks = <&cmu CLK_PPMULEFT>; |
| clock-names = "ppmu"; |
| status = "disabled"; |
| }; |
| |
| ppmu_camif: ppmu_camif@11ac0000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x11ac0000 0x2000>; |
| clocks = <&cmu CLK_PPMUCAMIF>; |
| clock-names = "ppmu"; |
| status = "disabled"; |
| }; |
| |
| ppmu_lcd0: ppmu_lcd0@11e40000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x11e40000 0x2000>; |
| clocks = <&cmu CLK_PPMULCD0>; |
| clock-names = "ppmu"; |
| status = "disabled"; |
| }; |
| |
| ppmu_fsys: ppmu_fsys@12630000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x12630000 0x2000>; |
| clocks = <&cmu CLK_PPMUFILE>; |
| clock-names = "ppmu"; |
| status = "disabled"; |
| }; |
| |
| ppmu_g3d: ppmu_g3d@13220000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x13220000 0x2000>; |
| clocks = <&cmu CLK_PPMUG3D>; |
| clock-names = "ppmu"; |
| status = "disabled"; |
| }; |
| |
| ppmu_mfc: ppmu_mfc@13660000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x13660000 0x2000>; |
| clocks = <&cmu CLK_PPMUMFC_L>; |
| clock-names = "ppmu"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| #include "exynos3250-pinctrl.dtsi" |