| /* |
| * Basic EISA bus support for the SGI Indigo-2. |
| * |
| * (C) 2002 Pascal Dameme <netinet@freesurf.fr> |
| * and Marc Zyngier <mzyngier@freesurf.fr> |
| * |
| * This code is released under both the GPL version 2 and BSD |
| * licenses. Either license may be used. |
| * |
| * This code offers a very basic support for this EISA bus present in |
| * the SGI Indigo-2. It currently only supports PIO (forget about DMA |
| * for the time being). This is enough for a low-end ethernet card, |
| * but forget about your favorite SCSI card... |
| * |
| * TODO : |
| * - Fix bugs... |
| * - Add ISA support |
| * - Add DMA (yeah, right...). |
| * - Fix more bugs. |
| */ |
| |
| #include <linux/eisa.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/mipsregs.h> |
| #include <asm/addrspace.h> |
| #include <asm/processor.h> |
| #include <asm/sgi/ioc.h> |
| #include <asm/sgi/mc.h> |
| #include <asm/sgi/ip22.h> |
| |
| /* I2 has four EISA slots. */ |
| #define IP22_EISA_MAX_SLOTS 4 |
| #define EISA_MAX_IRQ 16 |
| |
| #define EIU_MODE_REG 0x0001ffc0 |
| #define EIU_STAT_REG 0x0001ffc4 |
| #define EIU_PREMPT_REG 0x0001ffc8 |
| #define EIU_QUIET_REG 0x0001ffcc |
| #define EIU_INTRPT_ACK 0x00010004 |
| |
| static char __init *decode_eisa_sig(unsigned long addr) |
| { |
| static char sig_str[EISA_SIG_LEN]; |
| u8 sig[4]; |
| u16 rev; |
| int i; |
| |
| for (i = 0; i < 4; i++) { |
| sig[i] = inb (addr + i); |
| |
| if (!i && (sig[0] & 0x80)) |
| return NULL; |
| } |
| |
| sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1); |
| sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1); |
| sig_str[2] = (sig[1] & 0x1f) + ('A' - 1); |
| rev = (sig[2] << 8) | sig[3]; |
| sprintf(sig_str + 3, "%04X", rev); |
| |
| return sig_str; |
| } |
| |
| static irqreturn_t ip22_eisa_intr(int irq, void *dev_id) |
| { |
| u8 eisa_irq; |
| u8 dma1, dma2; |
| |
| eisa_irq = inb(EIU_INTRPT_ACK); |
| dma1 = inb(EISA_DMA1_STATUS); |
| dma2 = inb(EISA_DMA2_STATUS); |
| |
| if (eisa_irq < EISA_MAX_IRQ) { |
| do_IRQ(eisa_irq); |
| return IRQ_HANDLED; |
| } |
| |
| /* Oops, Bad Stuff Happened... */ |
| printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq); |
| |
| outb(0x20, EISA_INT2_CTRL); |
| outb(0x20, EISA_INT1_CTRL); |
| |
| return IRQ_NONE; |
| } |
| |
| static void enable_eisa1_irq(unsigned int irq) |
| { |
| unsigned long flags; |
| u8 mask; |
| |
| local_irq_save(flags); |
| |
| mask = inb(EISA_INT1_MASK); |
| mask &= ~((u8) (1 << irq)); |
| outb(mask, EISA_INT1_MASK); |
| |
| local_irq_restore(flags); |
| } |
| |
| static unsigned int startup_eisa1_irq(unsigned int irq) |
| { |
| u8 edge; |
| |
| /* Only use edge interrupts for EISA */ |
| |
| edge = inb(EISA_INT1_EDGE_LEVEL); |
| edge &= ~((u8) (1 << irq)); |
| outb(edge, EISA_INT1_EDGE_LEVEL); |
| |
| enable_eisa1_irq(irq); |
| return 0; |
| } |
| |
| static void disable_eisa1_irq(unsigned int irq) |
| { |
| u8 mask; |
| |
| mask = inb(EISA_INT1_MASK); |
| mask |= ((u8) (1 << irq)); |
| outb(mask, EISA_INT1_MASK); |
| } |
| |
| #define shutdown_eisa1_irq disable_eisa1_irq |
| |
| static void mask_and_ack_eisa1_irq(unsigned int irq) |
| { |
| disable_eisa1_irq(irq); |
| |
| outb(0x20, EISA_INT1_CTRL); |
| } |
| |
| static void end_eisa1_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) |
| enable_eisa1_irq(irq); |
| } |
| |
| static struct irq_chip ip22_eisa1_irq_type = { |
| .typename = "IP22 EISA", |
| .startup = startup_eisa1_irq, |
| .shutdown = shutdown_eisa1_irq, |
| .enable = enable_eisa1_irq, |
| .disable = disable_eisa1_irq, |
| .ack = mask_and_ack_eisa1_irq, |
| .end = end_eisa1_irq, |
| }; |
| |
| static void enable_eisa2_irq(unsigned int irq) |
| { |
| unsigned long flags; |
| u8 mask; |
| |
| local_irq_save(flags); |
| |
| mask = inb(EISA_INT2_MASK); |
| mask &= ~((u8) (1 << (irq - 8))); |
| outb(mask, EISA_INT2_MASK); |
| |
| local_irq_restore(flags); |
| } |
| |
| static unsigned int startup_eisa2_irq(unsigned int irq) |
| { |
| u8 edge; |
| |
| /* Only use edge interrupts for EISA */ |
| |
| edge = inb(EISA_INT2_EDGE_LEVEL); |
| edge &= ~((u8) (1 << (irq - 8))); |
| outb(edge, EISA_INT2_EDGE_LEVEL); |
| |
| enable_eisa2_irq(irq); |
| return 0; |
| } |
| |
| static void disable_eisa2_irq(unsigned int irq) |
| { |
| u8 mask; |
| |
| mask = inb(EISA_INT2_MASK); |
| mask |= ((u8) (1 << (irq - 8))); |
| outb(mask, EISA_INT2_MASK); |
| } |
| |
| #define shutdown_eisa2_irq disable_eisa2_irq |
| |
| static void mask_and_ack_eisa2_irq(unsigned int irq) |
| { |
| disable_eisa2_irq(irq); |
| |
| outb(0x20, EISA_INT2_CTRL); |
| } |
| |
| static void end_eisa2_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) |
| enable_eisa2_irq(irq); |
| } |
| |
| static struct irq_chip ip22_eisa2_irq_type = { |
| .typename = "IP22 EISA", |
| .startup = startup_eisa2_irq, |
| .shutdown = shutdown_eisa2_irq, |
| .enable = enable_eisa2_irq, |
| .disable = disable_eisa2_irq, |
| .ack = mask_and_ack_eisa2_irq, |
| .end = end_eisa2_irq, |
| }; |
| |
| static struct irqaction eisa_action = { |
| .handler = ip22_eisa_intr, |
| .name = "EISA", |
| }; |
| |
| static struct irqaction cascade_action = { |
| .handler = no_action, |
| .name = "EISA cascade", |
| }; |
| |
| int __init ip22_eisa_init(void) |
| { |
| int i, c; |
| char *str; |
| |
| if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) { |
| printk(KERN_INFO "EISA: bus not present.\n"); |
| return 1; |
| } |
| |
| printk(KERN_INFO "EISA: Probing bus...\n"); |
| for (c = 0, i = 1; i <= IP22_EISA_MAX_SLOTS; i++) { |
| if ((str = decode_eisa_sig(0x1000 * i + EISA_VENDOR_ID_OFFSET))) { |
| printk(KERN_INFO "EISA: slot %d : %s detected.\n", |
| i, str); |
| c++; |
| } |
| } |
| printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c < 2 ? "" : "s"); |
| #ifdef CONFIG_ISA |
| printk(KERN_INFO "ISA support compiled in.\n"); |
| #endif |
| |
| /* Warning : BlackMagicAhead(tm). |
| Please wave your favorite dead chicken over the busses */ |
| |
| /* First say hello to the EIU */ |
| outl(0x0000FFFF, EIU_PREMPT_REG); |
| outl(1, EIU_QUIET_REG); |
| outl(0x40f3c07F, EIU_MODE_REG); |
| |
| /* Now be nice to the EISA chipset */ |
| outb(1, EISA_EXT_NMI_RESET_CTRL); |
| udelay(50); /* Wait long enough for the dust to settle */ |
| outb(0, EISA_EXT_NMI_RESET_CTRL); |
| outb(0x11, EISA_INT1_CTRL); |
| outb(0x11, EISA_INT2_CTRL); |
| outb(0, EISA_INT1_MASK); |
| outb(8, EISA_INT2_MASK); |
| outb(4, EISA_INT1_MASK); |
| outb(2, EISA_INT2_MASK); |
| outb(1, EISA_INT1_MASK); |
| outb(1, EISA_INT2_MASK); |
| outb(0xfb, EISA_INT1_MASK); |
| outb(0xff, EISA_INT2_MASK); |
| outb(0, EISA_DMA2_WRITE_SINGLE); |
| |
| for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) { |
| irq_desc[i].status = IRQ_DISABLED; |
| irq_desc[i].action = 0; |
| irq_desc[i].depth = 1; |
| if (i < (SGINT_EISA + 8)) |
| irq_desc[i].chip = &ip22_eisa1_irq_type; |
| else |
| irq_desc[i].chip = &ip22_eisa2_irq_type; |
| } |
| |
| /* Cannot use request_irq because of kmalloc not being ready at such |
| * an early stage. Yes, I've been bitten... */ |
| setup_irq(SGI_EISA_IRQ, &eisa_action); |
| setup_irq(SGINT_EISA + 2, &cascade_action); |
| |
| EISA_bus = 1; |
| return 0; |
| } |