| /*====================================================================== |
| |
| Common support code for the PCMCIA control functionality of |
| integrated SOCs like the SA-11x0 and PXA2xx microprocessors. |
| |
| The contents of this file are subject to the Mozilla Public |
| License Version 1.1 (the "License"); you may not use this file |
| except in compliance with the License. You may obtain a copy of |
| the License at http://www.mozilla.org/MPL/ |
| |
| Software distributed under the License is distributed on an "AS |
| IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| implied. See the License for the specific language governing |
| rights and limitations under the License. |
| |
| The initial developer of the original code is John G. Dorsey |
| <john+@cs.cmu.edu>. Portions created by John G. Dorsey are |
| Copyright (C) 1999 John G. Dorsey. All Rights Reserved. |
| |
| Alternatively, the contents of this file may be used under the |
| terms of the GNU Public License version 2 (the "GPL"), in which |
| case the provisions of the GPL are applicable instead of the |
| above. If you wish to allow the use of your version of this file |
| only under the terms of the GPL and not to allow others to use |
| your version of this file under the MPL, indicate your decision |
| by deleting the provisions above and replace them with the notice |
| and other provisions required by the GPL. If you do not delete |
| the provisions above, a recipient may use your version of this |
| file under either the MPL or the GPL. |
| |
| ======================================================================*/ |
| |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/mm.h> |
| #include <linux/mutex.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/spinlock.h> |
| #include <linux/cpufreq.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/io.h> |
| #include <asm/system.h> |
| |
| #include "soc_common.h" |
| |
| #ifdef CONFIG_PCMCIA_DEBUG |
| |
| static int pc_debug; |
| module_param(pc_debug, int, 0644); |
| |
| void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func, |
| int lvl, const char *fmt, ...) |
| { |
| va_list args; |
| if (pc_debug > lvl) { |
| printk(KERN_DEBUG "skt%u: %s: ", skt->nr, func); |
| va_start(args, fmt); |
| vprintk(fmt, args); |
| va_end(args); |
| } |
| } |
| |
| #endif |
| |
| #define to_soc_pcmcia_socket(x) container_of(x, struct soc_pcmcia_socket, socket) |
| |
| static unsigned short |
| calc_speed(unsigned short *spds, int num, unsigned short dflt) |
| { |
| unsigned short speed = 0; |
| int i; |
| |
| for (i = 0; i < num; i++) |
| if (speed < spds[i]) |
| speed = spds[i]; |
| if (speed == 0) |
| speed = dflt; |
| |
| return speed; |
| } |
| |
| void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *skt, struct soc_pcmcia_timing *timing) |
| { |
| timing->io = calc_speed(skt->spd_io, MAX_IO_WIN, SOC_PCMCIA_IO_ACCESS); |
| timing->mem = calc_speed(skt->spd_mem, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS); |
| timing->attr = calc_speed(skt->spd_attr, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS); |
| } |
| EXPORT_SYMBOL(soc_common_pcmcia_get_timing); |
| |
| static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt) |
| { |
| struct pcmcia_state state; |
| unsigned int stat; |
| |
| memset(&state, 0, sizeof(struct pcmcia_state)); |
| |
| skt->ops->socket_state(skt, &state); |
| |
| stat = state.detect ? SS_DETECT : 0; |
| stat |= state.ready ? SS_READY : 0; |
| stat |= state.wrprot ? SS_WRPROT : 0; |
| stat |= state.vs_3v ? SS_3VCARD : 0; |
| stat |= state.vs_Xv ? SS_XVCARD : 0; |
| |
| /* The power status of individual sockets is not available |
| * explicitly from the hardware, so we just remember the state |
| * and regurgitate it upon request: |
| */ |
| stat |= skt->cs_state.Vcc ? SS_POWERON : 0; |
| |
| if (skt->cs_state.flags & SS_IOCARD) |
| stat |= state.bvd1 ? SS_STSCHG : 0; |
| else { |
| if (state.bvd1 == 0) |
| stat |= SS_BATDEAD; |
| else if (state.bvd2 == 0) |
| stat |= SS_BATWARN; |
| } |
| return stat; |
| } |
| |
| /* |
| * soc_common_pcmcia_config_skt |
| * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| * |
| * Convert PCMCIA socket state to our socket configure structure. |
| */ |
| static int |
| soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *state) |
| { |
| int ret; |
| |
| ret = skt->ops->configure_socket(skt, state); |
| if (ret == 0) { |
| /* |
| * This really needs a better solution. The IRQ |
| * may or may not be claimed by the driver. |
| */ |
| if (skt->irq_state != 1 && state->io_irq) { |
| skt->irq_state = 1; |
| set_irq_type(skt->irq, IRQ_TYPE_EDGE_FALLING); |
| } else if (skt->irq_state == 1 && state->io_irq == 0) { |
| skt->irq_state = 0; |
| set_irq_type(skt->irq, IRQ_TYPE_NONE); |
| } |
| |
| skt->cs_state = *state; |
| } |
| |
| if (ret < 0) |
| printk(KERN_ERR "soc_common_pcmcia: unable to configure " |
| "socket %d\n", skt->nr); |
| |
| return ret; |
| } |
| |
| /* soc_common_pcmcia_sock_init() |
| * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| * |
| * (Re-)Initialise the socket, turning on status interrupts |
| * and PCMCIA bus. This must wait for power to stabilise |
| * so that the card status signals report correctly. |
| * |
| * Returns: 0 |
| */ |
| static int soc_common_pcmcia_sock_init(struct pcmcia_socket *sock) |
| { |
| struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); |
| |
| debug(skt, 2, "initializing socket\n"); |
| |
| skt->ops->socket_init(skt); |
| return 0; |
| } |
| |
| |
| /* |
| * soc_common_pcmcia_suspend() |
| * ^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| * |
| * Remove power on the socket, disable IRQs from the card. |
| * Turn off status interrupts, and disable the PCMCIA bus. |
| * |
| * Returns: 0 |
| */ |
| static int soc_common_pcmcia_suspend(struct pcmcia_socket *sock) |
| { |
| struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); |
| |
| debug(skt, 2, "suspending socket\n"); |
| |
| skt->ops->socket_suspend(skt); |
| |
| return 0; |
| } |
| |
| static DEFINE_SPINLOCK(status_lock); |
| |
| static void soc_common_check_status(struct soc_pcmcia_socket *skt) |
| { |
| unsigned int events; |
| |
| debug(skt, 4, "entering PCMCIA monitoring thread\n"); |
| |
| do { |
| unsigned int status; |
| unsigned long flags; |
| |
| status = soc_common_pcmcia_skt_state(skt); |
| |
| spin_lock_irqsave(&status_lock, flags); |
| events = (status ^ skt->status) & skt->cs_state.csc_mask; |
| skt->status = status; |
| spin_unlock_irqrestore(&status_lock, flags); |
| |
| debug(skt, 4, "events: %s%s%s%s%s%s\n", |
| events == 0 ? "<NONE>" : "", |
| events & SS_DETECT ? "DETECT " : "", |
| events & SS_READY ? "READY " : "", |
| events & SS_BATDEAD ? "BATDEAD " : "", |
| events & SS_BATWARN ? "BATWARN " : "", |
| events & SS_STSCHG ? "STSCHG " : ""); |
| |
| if (events) |
| pcmcia_parse_events(&skt->socket, events); |
| } while (events); |
| } |
| |
| /* Let's poll for events in addition to IRQs since IRQ only is unreliable... */ |
| static void soc_common_pcmcia_poll_event(unsigned long dummy) |
| { |
| struct soc_pcmcia_socket *skt = (struct soc_pcmcia_socket *)dummy; |
| debug(skt, 4, "polling for events\n"); |
| |
| mod_timer(&skt->poll_timer, jiffies + SOC_PCMCIA_POLL_PERIOD); |
| |
| soc_common_check_status(skt); |
| } |
| |
| |
| /* |
| * Service routine for socket driver interrupts (requested by the |
| * low-level PCMCIA init() operation via soc_common_pcmcia_thread()). |
| * The actual interrupt-servicing work is performed by |
| * soc_common_pcmcia_thread(), largely because the Card Services event- |
| * handling code performs scheduling operations which cannot be |
| * executed from within an interrupt context. |
| */ |
| static irqreturn_t soc_common_pcmcia_interrupt(int irq, void *dev) |
| { |
| struct soc_pcmcia_socket *skt = dev; |
| |
| debug(skt, 3, "servicing IRQ %d\n", irq); |
| |
| soc_common_check_status(skt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| /* |
| * Implements the get_status() operation for the in-kernel PCMCIA |
| * service (formerly SS_GetStatus in Card Services). Essentially just |
| * fills in bits in `status' according to internal driver state or |
| * the value of the voltage detect chipselect register. |
| * |
| * As a debugging note, during card startup, the PCMCIA core issues |
| * three set_socket() commands in a row the first with RESET deasserted, |
| * the second with RESET asserted, and the last with RESET deasserted |
| * again. Following the third set_socket(), a get_status() command will |
| * be issued. The kernel is looking for the SS_READY flag (see |
| * setup_socket(), reset_socket(), and unreset_socket() in cs.c). |
| * |
| * Returns: 0 |
| */ |
| static int |
| soc_common_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status) |
| { |
| struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); |
| |
| skt->status = soc_common_pcmcia_skt_state(skt); |
| *status = skt->status; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Implements the set_socket() operation for the in-kernel PCMCIA |
| * service (formerly SS_SetSocket in Card Services). We more or |
| * less punt all of this work and let the kernel handle the details |
| * of power configuration, reset, &c. We also record the value of |
| * `state' in order to regurgitate it to the PCMCIA core later. |
| */ |
| static int |
| soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state) |
| { |
| struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); |
| |
| debug(skt, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n", |
| (state->csc_mask==0)?"<NONE> ":"", |
| (state->csc_mask&SS_DETECT)?"DETECT ":"", |
| (state->csc_mask&SS_READY)?"READY ":"", |
| (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"", |
| (state->csc_mask&SS_BATWARN)?"BATWARN ":"", |
| (state->csc_mask&SS_STSCHG)?"STSCHG ":"", |
| (state->flags==0)?"<NONE> ":"", |
| (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"", |
| (state->flags&SS_IOCARD)?"IOCARD ":"", |
| (state->flags&SS_RESET)?"RESET ":"", |
| (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"", |
| (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"", |
| state->Vcc, state->Vpp, state->io_irq); |
| |
| return soc_common_pcmcia_config_skt(skt, state); |
| } |
| |
| |
| /* |
| * Implements the set_io_map() operation for the in-kernel PCMCIA |
| * service (formerly SS_SetIOMap in Card Services). We configure |
| * the map speed as requested, but override the address ranges |
| * supplied by Card Services. |
| * |
| * Returns: 0 on success, -1 on error |
| */ |
| static int |
| soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map) |
| { |
| struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); |
| unsigned short speed = map->speed; |
| |
| debug(skt, 2, "map %u speed %u start 0x%08llx stop 0x%08llx\n", |
| map->map, map->speed, (unsigned long long)map->start, |
| (unsigned long long)map->stop); |
| debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n", |
| (map->flags==0)?"<NONE>":"", |
| (map->flags&MAP_ACTIVE)?"ACTIVE ":"", |
| (map->flags&MAP_16BIT)?"16BIT ":"", |
| (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"", |
| (map->flags&MAP_0WS)?"0WS ":"", |
| (map->flags&MAP_WRPROT)?"WRPROT ":"", |
| (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"", |
| (map->flags&MAP_PREFETCH)?"PREFETCH ":""); |
| |
| if (map->map >= MAX_IO_WIN) { |
| printk(KERN_ERR "%s(): map (%d) out of range\n", __func__, |
| map->map); |
| return -1; |
| } |
| |
| if (map->flags & MAP_ACTIVE) { |
| if (speed == 0) |
| speed = SOC_PCMCIA_IO_ACCESS; |
| } else { |
| speed = 0; |
| } |
| |
| skt->spd_io[map->map] = speed; |
| skt->ops->set_timing(skt); |
| |
| if (map->stop == 1) |
| map->stop = PAGE_SIZE-1; |
| |
| map->stop -= map->start; |
| map->stop += skt->socket.io_offset; |
| map->start = skt->socket.io_offset; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Implements the set_mem_map() operation for the in-kernel PCMCIA |
| * service (formerly SS_SetMemMap in Card Services). We configure |
| * the map speed as requested, but override the address ranges |
| * supplied by Card Services. |
| * |
| * Returns: 0 on success, -ERRNO on error |
| */ |
| static int |
| soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map) |
| { |
| struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); |
| struct resource *res; |
| unsigned short speed = map->speed; |
| |
| debug(skt, 2, "map %u speed %u card_start %08x\n", |
| map->map, map->speed, map->card_start); |
| debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n", |
| (map->flags==0)?"<NONE>":"", |
| (map->flags&MAP_ACTIVE)?"ACTIVE ":"", |
| (map->flags&MAP_16BIT)?"16BIT ":"", |
| (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"", |
| (map->flags&MAP_0WS)?"0WS ":"", |
| (map->flags&MAP_WRPROT)?"WRPROT ":"", |
| (map->flags&MAP_ATTRIB)?"ATTRIB ":"", |
| (map->flags&MAP_USE_WAIT)?"USE_WAIT ":""); |
| |
| if (map->map >= MAX_WIN) |
| return -EINVAL; |
| |
| if (map->flags & MAP_ACTIVE) { |
| if (speed == 0) |
| speed = 300; |
| } else { |
| speed = 0; |
| } |
| |
| if (map->flags & MAP_ATTRIB) { |
| res = &skt->res_attr; |
| skt->spd_attr[map->map] = speed; |
| skt->spd_mem[map->map] = 0; |
| } else { |
| res = &skt->res_mem; |
| skt->spd_attr[map->map] = 0; |
| skt->spd_mem[map->map] = speed; |
| } |
| |
| skt->ops->set_timing(skt); |
| |
| map->static_start = res->start + map->card_start; |
| |
| return 0; |
| } |
| |
| struct bittbl { |
| unsigned int mask; |
| const char *name; |
| }; |
| |
| static struct bittbl status_bits[] = { |
| { SS_WRPROT, "SS_WRPROT" }, |
| { SS_BATDEAD, "SS_BATDEAD" }, |
| { SS_BATWARN, "SS_BATWARN" }, |
| { SS_READY, "SS_READY" }, |
| { SS_DETECT, "SS_DETECT" }, |
| { SS_POWERON, "SS_POWERON" }, |
| { SS_STSCHG, "SS_STSCHG" }, |
| { SS_3VCARD, "SS_3VCARD" }, |
| { SS_XVCARD, "SS_XVCARD" }, |
| }; |
| |
| static struct bittbl conf_bits[] = { |
| { SS_PWR_AUTO, "SS_PWR_AUTO" }, |
| { SS_IOCARD, "SS_IOCARD" }, |
| { SS_RESET, "SS_RESET" }, |
| { SS_DMA_MODE, "SS_DMA_MODE" }, |
| { SS_SPKR_ENA, "SS_SPKR_ENA" }, |
| { SS_OUTPUT_ENA, "SS_OUTPUT_ENA" }, |
| }; |
| |
| static void |
| dump_bits(char **p, const char *prefix, unsigned int val, struct bittbl *bits, int sz) |
| { |
| char *b = *p; |
| int i; |
| |
| b += sprintf(b, "%-9s:", prefix); |
| for (i = 0; i < sz; i++) |
| if (val & bits[i].mask) |
| b += sprintf(b, " %s", bits[i].name); |
| *b++ = '\n'; |
| *p = b; |
| } |
| |
| /* |
| * Implements the /sys/class/pcmcia_socket/??/status file. |
| * |
| * Returns: the number of characters added to the buffer |
| */ |
| static ssize_t show_status(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct soc_pcmcia_socket *skt = |
| container_of(dev, struct soc_pcmcia_socket, socket.dev); |
| char *p = buf; |
| |
| p+=sprintf(p, "slot : %d\n", skt->nr); |
| |
| dump_bits(&p, "status", skt->status, |
| status_bits, ARRAY_SIZE(status_bits)); |
| dump_bits(&p, "csc_mask", skt->cs_state.csc_mask, |
| status_bits, ARRAY_SIZE(status_bits)); |
| dump_bits(&p, "cs_flags", skt->cs_state.flags, |
| conf_bits, ARRAY_SIZE(conf_bits)); |
| |
| p+=sprintf(p, "Vcc : %d\n", skt->cs_state.Vcc); |
| p+=sprintf(p, "Vpp : %d\n", skt->cs_state.Vpp); |
| p+=sprintf(p, "IRQ : %d (%d)\n", skt->cs_state.io_irq, skt->irq); |
| if (skt->ops->show_timing) |
| p+=skt->ops->show_timing(skt, p); |
| |
| return p-buf; |
| } |
| static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); |
| |
| |
| static struct pccard_operations soc_common_pcmcia_operations = { |
| .init = soc_common_pcmcia_sock_init, |
| .suspend = soc_common_pcmcia_suspend, |
| .get_status = soc_common_pcmcia_get_status, |
| .set_socket = soc_common_pcmcia_set_socket, |
| .set_io_map = soc_common_pcmcia_set_io_map, |
| .set_mem_map = soc_common_pcmcia_set_mem_map, |
| }; |
| |
| |
| int soc_pcmcia_request_irqs(struct soc_pcmcia_socket *skt, |
| struct pcmcia_irqs *irqs, int nr) |
| { |
| int i, res = 0; |
| |
| for (i = 0; i < nr; i++) { |
| if (irqs[i].sock != skt->nr) |
| continue; |
| res = request_irq(irqs[i].irq, soc_common_pcmcia_interrupt, |
| IRQF_DISABLED, irqs[i].str, skt); |
| if (res) |
| break; |
| set_irq_type(irqs[i].irq, IRQ_TYPE_NONE); |
| } |
| |
| if (res) { |
| printk(KERN_ERR "PCMCIA: request for IRQ%d failed (%d)\n", |
| irqs[i].irq, res); |
| |
| while (i--) |
| if (irqs[i].sock == skt->nr) |
| free_irq(irqs[i].irq, skt); |
| } |
| return res; |
| } |
| EXPORT_SYMBOL(soc_pcmcia_request_irqs); |
| |
| void soc_pcmcia_free_irqs(struct soc_pcmcia_socket *skt, |
| struct pcmcia_irqs *irqs, int nr) |
| { |
| int i; |
| |
| for (i = 0; i < nr; i++) |
| if (irqs[i].sock == skt->nr) |
| free_irq(irqs[i].irq, skt); |
| } |
| EXPORT_SYMBOL(soc_pcmcia_free_irqs); |
| |
| void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket *skt, |
| struct pcmcia_irqs *irqs, int nr) |
| { |
| int i; |
| |
| for (i = 0; i < nr; i++) |
| if (irqs[i].sock == skt->nr) |
| set_irq_type(irqs[i].irq, IRQ_TYPE_NONE); |
| } |
| EXPORT_SYMBOL(soc_pcmcia_disable_irqs); |
| |
| void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket *skt, |
| struct pcmcia_irqs *irqs, int nr) |
| { |
| int i; |
| |
| for (i = 0; i < nr; i++) |
| if (irqs[i].sock == skt->nr) { |
| set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_RISING); |
| set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_BOTH); |
| } |
| } |
| EXPORT_SYMBOL(soc_pcmcia_enable_irqs); |
| |
| |
| static LIST_HEAD(soc_pcmcia_sockets); |
| static DEFINE_MUTEX(soc_pcmcia_sockets_lock); |
| |
| #ifdef CONFIG_CPU_FREQ |
| static int |
| soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data) |
| { |
| struct soc_pcmcia_socket *skt; |
| struct cpufreq_freqs *freqs = data; |
| int ret = 0; |
| |
| mutex_lock(&soc_pcmcia_sockets_lock); |
| list_for_each_entry(skt, &soc_pcmcia_sockets, node) |
| if ( skt->ops->frequency_change ) |
| ret += skt->ops->frequency_change(skt, val, freqs); |
| mutex_unlock(&soc_pcmcia_sockets_lock); |
| |
| return ret; |
| } |
| |
| static struct notifier_block soc_pcmcia_notifier_block = { |
| .notifier_call = soc_pcmcia_notifier |
| }; |
| |
| static int soc_pcmcia_cpufreq_register(void) |
| { |
| int ret; |
| |
| ret = cpufreq_register_notifier(&soc_pcmcia_notifier_block, |
| CPUFREQ_TRANSITION_NOTIFIER); |
| if (ret < 0) |
| printk(KERN_ERR "Unable to register CPU frequency change " |
| "notifier for PCMCIA (%d)\n", ret); |
| return ret; |
| } |
| fs_initcall(soc_pcmcia_cpufreq_register); |
| |
| static void soc_pcmcia_cpufreq_unregister(void) |
| { |
| cpufreq_unregister_notifier(&soc_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); |
| } |
| module_exit(soc_pcmcia_cpufreq_unregister); |
| |
| #endif |
| |
| void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt) |
| { |
| mutex_lock(&soc_pcmcia_sockets_lock); |
| del_timer_sync(&skt->poll_timer); |
| |
| pcmcia_unregister_socket(&skt->socket); |
| |
| flush_scheduled_work(); |
| |
| skt->ops->hw_shutdown(skt); |
| |
| soc_common_pcmcia_config_skt(skt, &dead_socket); |
| |
| list_del(&skt->node); |
| mutex_unlock(&soc_pcmcia_sockets_lock); |
| |
| iounmap(skt->virt_io); |
| skt->virt_io = NULL; |
| release_resource(&skt->res_attr); |
| release_resource(&skt->res_mem); |
| release_resource(&skt->res_io); |
| release_resource(&skt->res_skt); |
| } |
| EXPORT_SYMBOL(soc_pcmcia_remove_one); |
| |
| int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt) |
| { |
| int ret; |
| |
| init_timer(&skt->poll_timer); |
| skt->poll_timer.function = soc_common_pcmcia_poll_event; |
| skt->poll_timer.data = (unsigned long)skt; |
| skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD; |
| |
| ret = request_resource(&iomem_resource, &skt->res_skt); |
| if (ret) |
| goto out_err_1; |
| |
| ret = request_resource(&skt->res_skt, &skt->res_io); |
| if (ret) |
| goto out_err_2; |
| |
| ret = request_resource(&skt->res_skt, &skt->res_mem); |
| if (ret) |
| goto out_err_3; |
| |
| ret = request_resource(&skt->res_skt, &skt->res_attr); |
| if (ret) |
| goto out_err_4; |
| |
| skt->virt_io = ioremap(skt->res_io.start, 0x10000); |
| if (skt->virt_io == NULL) { |
| ret = -ENOMEM; |
| goto out_err_5; |
| } |
| |
| mutex_lock(&soc_pcmcia_sockets_lock); |
| |
| list_add(&skt->node, &soc_pcmcia_sockets); |
| |
| /* |
| * We initialize default socket timing here, because |
| * we are not guaranteed to see a SetIOMap operation at |
| * runtime. |
| */ |
| skt->ops->set_timing(skt); |
| |
| ret = skt->ops->hw_init(skt); |
| if (ret) |
| goto out_err_6; |
| |
| skt->socket.ops = &soc_common_pcmcia_operations; |
| skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD; |
| skt->socket.resource_ops = &pccard_static_ops; |
| skt->socket.irq_mask = 0; |
| skt->socket.map_size = PAGE_SIZE; |
| skt->socket.pci_irq = skt->irq; |
| skt->socket.io_offset = (unsigned long)skt->virt_io; |
| |
| skt->status = soc_common_pcmcia_skt_state(skt); |
| |
| ret = pcmcia_register_socket(&skt->socket); |
| if (ret) |
| goto out_err_7; |
| |
| add_timer(&skt->poll_timer); |
| |
| mutex_unlock(&soc_pcmcia_sockets_lock); |
| |
| ret = device_create_file(&skt->socket.dev, &dev_attr_status); |
| if (ret) |
| goto out_err_8; |
| |
| return ret; |
| |
| out_err_8: |
| mutex_lock(&soc_pcmcia_sockets_lock); |
| del_timer_sync(&skt->poll_timer); |
| pcmcia_unregister_socket(&skt->socket); |
| |
| out_err_7: |
| flush_scheduled_work(); |
| |
| skt->ops->hw_shutdown(skt); |
| out_err_6: |
| list_del(&skt->node); |
| mutex_unlock(&soc_pcmcia_sockets_lock); |
| iounmap(skt->virt_io); |
| out_err_5: |
| release_resource(&skt->res_attr); |
| out_err_4: |
| release_resource(&skt->res_mem); |
| out_err_3: |
| release_resource(&skt->res_io); |
| out_err_2: |
| release_resource(&skt->res_skt); |
| out_err_1: |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(soc_pcmcia_add_one); |
| |
| MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>"); |
| MODULE_DESCRIPTION("Linux PCMCIA Card Services: Common SoC support"); |
| MODULE_LICENSE("Dual MPL/GPL"); |