arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 /dts-v1/;

 #include "dra74x.dtsi"
 #include "am57xx-commercial-grade.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>

 / {
 	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";

 	aliases {
 		rtc0 = &mcp_rtc;
 		rtc1 = &tps659038_rtc;
 		rtc2 = &rtc;
 		display0 = &hdmi0;
 	};

 	chosen {
 		stdout-path = &uart3;
 	};

 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};

 	vdd_3v3: fixedregulator-vdd_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&regen1>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};

 	aic_dvdd: fixedregulator-aic_dvdd {
 		compatible = "regulator-fixed";
 		regulator-name = "aic_dvdd_fixed";
 		vin-supply = <&vdd_3v3>;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};

 	vtt_fixed: fixedregulator-vtt {
 		/* TPS51200 */
 		compatible = "regulator-fixed";
 		regulator-name = "vtt_fixed";
 		vin-supply = <&smps3_reg>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		regulator-boot-on;
 		enable-active-high;
 		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
 	};

 	leds {
 		compatible = "gpio-leds";

 		led0 {
 			label = "beagle-x15:usr0";
 			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};

 		led1 {
 			label = "beagle-x15:usr1";
 			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};

 		led2 {
 			label = "beagle-x15:usr2";
 			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};

 		led3 {
 			label = "beagle-x15:usr3";
 			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 			default-state = "off";
 		};
 	};

 	gpio_fan: gpio_fan {
 		/* Based on 5v 500mA AFB02505HHB */
 		compatible = "gpio-fan";
 		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 		#cooling-cells = <2>;
 	};

 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";

 		type = "a";

 		port {
 			hdmi_connector_in: endpoint {
 				remote-endpoint = <&tpd12s015_out>;
 			};
 		};
 	};

 	tpd12s015: encoder {
 		compatible = "ti,tpd12s015";

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@0 {
 				reg = <0>;

 				tpd12s015_in: endpoint {
 					remote-endpoint = <&hdmi_out>;
 				};
 			};

 			port@1 {
 				reg = <1>;

 				tpd12s015_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
 		};
 	};

 	sound0: sound0 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "BeagleBoard-X15";
 		simple-audio-card,widgets =
 			"Line", "Line Out",
 			"Line", "Line In";
 		simple-audio-card,routing =
 			"Line Out",	"LLOUT",
 			"Line Out",	"RLOUT",
 			"MIC2L",	"Line In",
 			"MIC2R",	"Line In";
 		simple-audio-card,format = "dsp_b";
 		simple-audio-card,bitclock-master = <&sound0_master>;
 		simple-audio-card,frame-master = <&sound0_master>;
 		simple-audio-card,bitclock-inversion;

 		simple-audio-card,cpu {
 			sound-dai = <&mcasp3>;
 		};

 		sound0_master: simple-audio-card,codec {
 			sound-dai = <&tlv320aic3104>;
 			clocks = <&clkout2_clk>;
 		};
 	};
 };

 &dra7_pmx_core {
 	mmc1_pins_default: mmc1_pins_default {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
 			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
 			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
 			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
 			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 		>;
 	};

 	mmc2_pins_default: mmc2_pins_default {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
 			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
 			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
 			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
 			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
 			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
 			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
 			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
 			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 		>;
 	};
 };
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;

 	tps659038: tps659038@58 {
 		compatible = "ti,tps659038";
 		reg = <0x58>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

 		#interrupt-cells = <2>;
 		interrupt-controller;

 		ti,system-power-controller;
 		ti,palmas-override-powerhold;

 		tps659038_pmic {
 			compatible = "ti,tps659038-pmic";

 			regulators {
 				smps12_reg: smps12 {
 					/* VDD_MPU */
 					regulator-name = "smps12";
 					regulator-min-microvolt = < 850000>;
 					regulator-max-microvolt = <1250000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				smps3_reg: smps3 {
 					/* VDD_DDR */
 					regulator-name = "smps3";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				smps45_reg: smps45 {
 					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
 					regulator-name = "smps45";
 					regulator-min-microvolt = < 850000>;
 					regulator-max-microvolt = <1250000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				smps6_reg: smps6 {
 					/* VDD_CORE */
 					regulator-name = "smps6";
 					regulator-min-microvolt = <850000>;
 					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				/* SMPS7 unused */

 				smps8_reg: smps8 {
 					/* VDD_1V8 */
 					regulator-name = "smps8";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				/* SMPS9 unused */

 				ldo1_reg: ldo1 {
 					/* VDD_SD / VDDSHV8  */
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
 					regulator-always-on;
 				};

 				ldo2_reg: ldo2 {
 					/* VDD_SHV5 */
 					regulator-name = "ldo2";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				ldo3_reg: ldo3 {
 					/* VDDA_1V8_PHYA */
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				ldo4_reg: ldo4 {
 					/* VDDA_1V8_PHYB */
 					regulator-name = "ldo4";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				ldo9_reg: ldo9 {
 					/* VDD_RTC */
 					regulator-name = "ldo9";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				ldoln_reg: ldoln {
 					/* VDDA_1V8_PLL */
 					regulator-name = "ldoln";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

 				ldousb_reg: ldousb {
 					/* VDDA_3V_USB: VDDA_USBHS33 */
 					regulator-name = "ldousb";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
 				};

 				regen1: regen1 {
 					/* VDD_3V3_ON */
 					regulator-name = "regen1";
 					regulator-boot-on;
 					regulator-always-on;
 				};
 			};
 		};

 		tps659038_rtc: tps659038_rtc {
 			compatible = "ti,palmas-rtc";
 			interrupt-parent = <&tps659038>;
 			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 			wakeup-source;
 		};

 		tps659038_pwr_button: tps659038_pwr_button {
 			compatible = "ti,palmas-pwrbutton";
 			interrupt-parent = <&tps659038>;
 			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 			wakeup-source;
 			ti,palmas-long-press-seconds = <12>;
 		};

 		tps659038_gpio: tps659038_gpio {
 			compatible = "ti,palmas-gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
 		};

 		extcon_usb2: tps659038_usb {
 			compatible = "ti,palmas-usb-vid";
 			ti,enable-vbus-detection;
 			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 		};

 	};

 	tmp102: tmp102@48 {
 		compatible = "ti,tmp102";
 		reg = <0x48>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 		#thermal-sensor-cells = <1>;
 	};

 	tlv320aic3104: tlv320aic3104@18 {
 		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3104";
 		reg = <0x18>;
 		assigned-clocks = <&clkoutmux2_clk_mux>;
 		assigned-clock-parents = <&sys_clk2_dclk_div>;

 		status = "okay";
 		adc-settle-ms = <40>;

 		AVDD-supply = <&vdd_3v3>;
 		IOVDD-supply = <&vdd_3v3>;
 		DRVDD-supply = <&vdd_3v3>;
 		DVDD-supply = <&aic_dvdd>;
 	};

 	eeprom: eeprom@50 {
 		compatible = "atmel,24c32";
 		reg = <0x50>;
 	};
 };

 &i2c3 {
 	status = "okay";
 	clock-frequency = <400000>;

 	mcp_rtc: rtc@6f {
 		compatible = "microchip,mcp7941x";
 		reg = <0x6f>;
 		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
 				      <&dra7_pmx_core 0x424>;
 		interrupt-names = "irq", "wakeup";

 		vcc-supply = <&vdd_3v3>;
 		wakeup-source;
 	};
 };

 &gpio7 {
 	ti,no-reset-on-init;
 	ti,no-idle-on-init;
 };

 &cpu0 {
 	cpu0-supply = <&smps12_reg>;
 	voltage-tolerance = <1>;
 };

 &uart3 {
 	status = "okay";
 	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 			      <&dra7_pmx_core 0x3f8>;
 };

 &davinci_mdio {
 	phy0: ethernet-phy@1 {
 		reg = <1>;
 	};

 	phy1: ethernet-phy@2 {
 		reg = <2>;
 	};
 };

 &mac {
 	status = "okay";
 	dual_emac;
 };

 &cpsw_emac0 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };

 &cpsw_emac1 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };

 &mmc1 {
 	status = "okay";

 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_default>;

 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 };

 &mmc2 {
 	status = "okay";

 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_default>;

 	vmmc-supply = <&vdd_3v3>;
 	bus-width = <8>;
 	ti,non-removable;
 	cap-mmc-dual-data-rate;
 };

 &sata {
 	status = "okay";
 };

 &usb2_phy1 {
 	phy-supply = <&ldousb_reg>;
 };

 &usb2_phy2 {
 	phy-supply = <&ldousb_reg>;
 };

 &usb1 {
 	dr_mode = "host";
 };

 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };

 &usb2 {
 	/*
 	 * Stand alone usage is peripheral only.
 	 * However, with some resistor modifications
 	 * this port can be used via expansion connectors
 	 * as "host" or "dual-role". If so, provide
 	 * the necessary dr_mode override in the expansion
 	 * board's DT.
 	 */
 	dr_mode = "peripheral";
 };

 &cpu_trips {
 	cpu_alert1: cpu_alert1 {
 		temperature = <50000>; /* millicelsius */
 		hysteresis = <2000>; /* millicelsius */
 		type = "active";
 	};
 };

 &cpu_cooling_maps {
 	map1 {
 		trip = <&cpu_alert1>;
 		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 	};
 };

 &thermal_zones {
 	board_thermal: board_thermal {
 		polling-delay-passive = <1250>; /* milliseconds */
 		polling-delay = <1500>; /* milliseconds */

 				/* sensor       ID */
 		thermal-sensors = <&tmp102     0>;

 		board_trips: trips {
 			board_alert0: board_alert {
 				temperature = <40000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "active";
 			};

 			board_crit: board_crit {
 				temperature = <105000>; /* millicelsius */
 				hysteresis = <0>; /* millicelsius */
 				type = "critical";
 			};
 		};

 		board_cooling_maps: cooling-maps {
 			map0 {
 				trip = <&board_alert0>;
 				cooling-device =
 				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 			};
 		};
        };
 };

 &dss {
 	status = "ok";

 	vdda_video-supply = <&ldoln_reg>;
 };

 &hdmi {
 	status = "ok";
 	vdda-supply = <&ldo4_reg>;

 	port {
 		hdmi_out: endpoint {
 			remote-endpoint = <&tpd12s015_in>;
 		};
 	};
 };

 &pcie1 {
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };

 &mcasp3 {
 	#sound-dai-cells = <0>;
 	assigned-clocks = <&mcasp3_ahclkx_mux>;
 	assigned-clock-parents = <&sys_clkin2>;
 	status = "okay";

 	op-mode = <0>;	/* MCASP_IIS_MODE */
 	tdm-slots = <2>;
 	/* 4 serializers */
 	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
 		1 2 0 0
 	>;
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };

 &mailbox5 {
 	status = "okay";
 	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
 		status = "okay";
 	};
 	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
 		status = "okay";
 	};
 };

 &mailbox6 {
 	status = "okay";
 	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 		status = "okay";
 	};
 	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
 		status = "okay";
 	};
 };
	/*
	* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/
	/dts-v1/;

	#include "dra74x.dtsi"
	#include "am57xx-commercial-grade.dtsi"
	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/interrupt-controller/irq.h>

	/ {
	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";

	aliases {
	rtc0 = &mcp_rtc;
	rtc1 = &tps659038_rtc;
	rtc2 = &rtc;
	display0 = &hdmi0;
	};

	chosen {
	stdout-path = &uart3;
	};

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x80000000 0x0 0x80000000>;
	};

	vdd_3v3: fixedregulator-vdd_3v3 {
	compatible = "regulator-fixed";
	regulator-name = "vdd_3v3";
	vin-supply = <&regen1>;
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};

	aic_dvdd: fixedregulator-aic_dvdd {
	compatible = "regulator-fixed";
	regulator-name = "aic_dvdd_fixed";
	vin-supply = <&vdd_3v3>;
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	};

	vtt_fixed: fixedregulator-vtt {
	/* TPS51200 */
	compatible = "regulator-fixed";
	regulator-name = "vtt_fixed";
	vin-supply = <&smps3_reg>;
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-always-on;
	regulator-boot-on;
	enable-active-high;
	gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
	};

	leds {
	compatible = "gpio-leds";

	led0 {
	label = "beagle-x15:usr0";
	gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "heartbeat";
	default-state = "off";
	};

	led1 {
	label = "beagle-x15:usr1";
	gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "cpu0";
	default-state = "off";
	};

	led2 {
	label = "beagle-x15:usr2";
	gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "mmc0";
	default-state = "off";
	};

	led3 {
	label = "beagle-x15:usr3";
	gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "disk-activity";
	default-state = "off";
	};
	};

	gpio_fan: gpio_fan {
	/* Based on 5v 500mA AFB02505HHB */
	compatible = "gpio-fan";
	gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
	gpio-fan,speed-map = <0 0>,
	<13000 1>;
	#cooling-cells = <2>;
	};

	hdmi0: connector {
	compatible = "hdmi-connector";
	label = "hdmi";

	type = "a";

	port {
	hdmi_connector_in: endpoint {
	remote-endpoint = <&tpd12s015_out>;
	};
	};
	};

	tpd12s015: encoder {
	compatible = "ti,tpd12s015";

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@0 {
	reg = <0>;

	tpd12s015_in: endpoint {
	remote-endpoint = <&hdmi_out>;
	};
	};

	port@1 {
	reg = <1>;

	tpd12s015_out: endpoint {
	remote-endpoint = <&hdmi_connector_in>;
	};
	};
	};
	};

	sound0: sound0 {
	compatible = "simple-audio-card";
	simple-audio-card,name = "BeagleBoard-X15";
	simple-audio-card,widgets =
	"Line", "Line Out",
	"Line", "Line In";
	simple-audio-card,routing =
	"Line Out", "LLOUT",
	"Line Out", "RLOUT",
	"MIC2L", "Line In",
	"MIC2R", "Line In";
	simple-audio-card,format = "dsp_b";
	simple-audio-card,bitclock-master = <&sound0_master>;
	simple-audio-card,frame-master = <&sound0_master>;
	simple-audio-card,bitclock-inversion;

	simple-audio-card,cpu {
	sound-dai = <&mcasp3>;
	};

	sound0_master: simple-audio-card,codec {
	sound-dai = <&tlv320aic3104>;
	clocks = <&clkout2_clk>;
	};
	};
	};

	&dra7_pmx_core {
	mmc1_pins_default: mmc1_pins_default {
	pinctrl-single,pins = <
	DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT \| MUX_MODE14) /* mmc1sdcd.gpio219 */
	DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_clk.clk */
	DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_cmd.cmd */
	DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_dat0.dat0 */
	DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_dat1.dat1 */
	DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_dat2.dat2 */
	DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_dat3.dat3 */
	>;
	};

	mmc2_pins_default: mmc2_pins_default {
	pinctrl-single,pins = <
	DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_a23.mmc2_clk */
	DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
	DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
	DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
	DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
	DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
	DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
	DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
	DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
	DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
	>;
	};
	};
	&i2c1 {
	status = "okay";
	clock-frequency = <400000>;

	tps659038: tps659038@58 {
	compatible = "ti,tps659038";
	reg = <0x58>;
	interrupt-parent = <&gpio1>;
	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

	#interrupt-cells = <2>;
	interrupt-controller;

	ti,system-power-controller;
	ti,palmas-override-powerhold;

	tps659038_pmic {
	compatible = "ti,tps659038-pmic";

	regulators {
	smps12_reg: smps12 {
	/* VDD_MPU */
	regulator-name = "smps12";
	regulator-min-microvolt = < 850000>;
	regulator-max-microvolt = <1250000>;
	regulator-always-on;
	regulator-boot-on;
	};

	smps3_reg: smps3 {
	/* VDD_DDR */
	regulator-name = "smps3";
	regulator-min-microvolt = <1350000>;
	regulator-max-microvolt = <1350000>;
	regulator-always-on;
	regulator-boot-on;
	};

	smps45_reg: smps45 {
	/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
	regulator-name = "smps45";
	regulator-min-microvolt = < 850000>;
	regulator-max-microvolt = <1250000>;
	regulator-always-on;
	regulator-boot-on;
	};

	smps6_reg: smps6 {
	/* VDD_CORE */
	regulator-name = "smps6";
	regulator-min-microvolt = <850000>;
	regulator-max-microvolt = <1150000>;
	regulator-always-on;
	regulator-boot-on;
	};

	/* SMPS7 unused */

	smps8_reg: smps8 {
	/* VDD_1V8 */
	regulator-name = "smps8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	regulator-boot-on;
	};

	/* SMPS9 unused */

	ldo1_reg: ldo1 {
	/* VDD_SD / VDDSHV8 */
	regulator-name = "ldo1";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;
	regulator-boot-on;
	regulator-always-on;
	};

	ldo2_reg: ldo2 {
	/* VDD_SHV5 */
	regulator-name = "ldo2";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-always-on;
	regulator-boot-on;
	};

	ldo3_reg: ldo3 {
	/* VDDA_1V8_PHYA */
	regulator-name = "ldo3";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	regulator-boot-on;
	};

	ldo4_reg: ldo4 {
	/* VDDA_1V8_PHYB */
	regulator-name = "ldo4";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	regulator-boot-on;
	};

	ldo9_reg: ldo9 {
	/* VDD_RTC */
	regulator-name = "ldo9";
	regulator-min-microvolt = <1050000>;
	regulator-max-microvolt = <1050000>;
	regulator-always-on;
	regulator-boot-on;
	};

	ldoln_reg: ldoln {
	/* VDDA_1V8_PLL */
	regulator-name = "ldoln";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	regulator-boot-on;
	};

	ldousb_reg: ldousb {
	/* VDDA_3V_USB: VDDA_USBHS33 */
	regulator-name = "ldousb";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-boot-on;
	};

	regen1: regen1 {
	/* VDD_3V3_ON */
	regulator-name = "regen1";
	regulator-boot-on;
	regulator-always-on;
	};
	};
	};

	tps659038_rtc: tps659038_rtc {
	compatible = "ti,palmas-rtc";
	interrupt-parent = <&tps659038>;
	interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
	wakeup-source;
	};

	tps659038_pwr_button: tps659038_pwr_button {
	compatible = "ti,palmas-pwrbutton";
	interrupt-parent = <&tps659038>;
	interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
	wakeup-source;
	ti,palmas-long-press-seconds = <12>;
	};

	tps659038_gpio: tps659038_gpio {
	compatible = "ti,palmas-gpio";
	gpio-controller;
	#gpio-cells = <2>;
	};

	extcon_usb2: tps659038_usb {
	compatible = "ti,palmas-usb-vid";
	ti,enable-vbus-detection;
	vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
	};

	};

	tmp102: tmp102@48 {
	compatible = "ti,tmp102";
	reg = <0x48>;
	interrupt-parent = <&gpio7>;
	interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
	#thermal-sensor-cells = <1>;
	};

	tlv320aic3104: tlv320aic3104@18 {
	#sound-dai-cells = <0>;
	compatible = "ti,tlv320aic3104";
	reg = <0x18>;
	assigned-clocks = <&clkoutmux2_clk_mux>;
	assigned-clock-parents = <&sys_clk2_dclk_div>;

	status = "okay";
	adc-settle-ms = <40>;

	AVDD-supply = <&vdd_3v3>;
	IOVDD-supply = <&vdd_3v3>;
	DRVDD-supply = <&vdd_3v3>;
	DVDD-supply = <&aic_dvdd>;
	};

	eeprom: eeprom@50 {
	compatible = "atmel,24c32";
	reg = <0x50>;
	};
	};

	&i2c3 {
	status = "okay";
	clock-frequency = <400000>;

	mcp_rtc: rtc@6f {
	compatible = "microchip,mcp7941x";
	reg = <0x6f>;
	interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
	<&dra7_pmx_core 0x424>;
	interrupt-names = "irq", "wakeup";

	vcc-supply = <&vdd_3v3>;
	wakeup-source;
	};
	};

	&gpio7 {
	ti,no-reset-on-init;
	ti,no-idle-on-init;
	};

	&cpu0 {
	cpu0-supply = <&smps12_reg>;
	voltage-tolerance = <1>;
	};

	&uart3 {
	status = "okay";
	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
	<&dra7_pmx_core 0x3f8>;
	};

	&davinci_mdio {
	phy0: ethernet-phy@1 {
	reg = <1>;
	};

	phy1: ethernet-phy@2 {
	reg = <2>;
	};
	};

	&mac {
	status = "okay";
	dual_emac;
	};

	&cpsw_emac0 {
	phy-handle = <&phy0>;
	phy-mode = "rgmii";
	dual_emac_res_vlan = <1>;
	};

	&cpsw_emac1 {
	phy-handle = <&phy1>;
	phy-mode = "rgmii";
	dual_emac_res_vlan = <2>;
	};

	&mmc1 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins_default>;

	bus-width = <4>;
	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
	};

	&mmc2 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins_default>;

	vmmc-supply = <&vdd_3v3>;
	bus-width = <8>;
	ti,non-removable;
	cap-mmc-dual-data-rate;
	};

	&sata {
	status = "okay";
	};

	&usb2_phy1 {
	phy-supply = <&ldousb_reg>;
	};

	&usb2_phy2 {
	phy-supply = <&ldousb_reg>;
	};

	&usb1 {
	dr_mode = "host";
	};

	&omap_dwc3_2 {
	extcon = <&extcon_usb2>;
	};

	&usb2 {
	/*
	* Stand alone usage is peripheral only.
	* However, with some resistor modifications
	* this port can be used via expansion connectors
	* as "host" or "dual-role". If so, provide
	* the necessary dr_mode override in the expansion
	* board's DT.
	*/
	dr_mode = "peripheral";
	};

	&cpu_trips {
	cpu_alert1: cpu_alert1 {
	temperature = <50000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "active";
	};
	};

	&cpu_cooling_maps {
	map1 {
	trip = <&cpu_alert1>;
	cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
	};
	};

	&thermal_zones {
	board_thermal: board_thermal {
	polling-delay-passive = <1250>; /* milliseconds */
	polling-delay = <1500>; /* milliseconds */

	/* sensor ID */
	thermal-sensors = <&tmp102 0>;

	board_trips: trips {
	board_alert0: board_alert {
	temperature = <40000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "active";
	};

	board_crit: board_crit {
	temperature = <105000>; /* millicelsius */
	hysteresis = <0>; /* millicelsius */
	type = "critical";
	};
	};

	board_cooling_maps: cooling-maps {
	map0 {
	trip = <&board_alert0>;
	cooling-device =
	<&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
	};
	};
	};
	};

	&dss {
	status = "ok";

	vdda_video-supply = <&ldoln_reg>;
	};

	&hdmi {
	status = "ok";
	vdda-supply = <&ldo4_reg>;

	port {
	hdmi_out: endpoint {
	remote-endpoint = <&tpd12s015_in>;
	};
	};
	};

	&pcie1 {
	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
	};

	&mcasp3 {
	#sound-dai-cells = <0>;
	assigned-clocks = <&mcasp3_ahclkx_mux>;
	assigned-clock-parents = <&sys_clkin2>;
	status = "okay";

	op-mode = <0>; /* MCASP_IIS_MODE */
	tdm-slots = <2>;
	/* 4 serializers */
	serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
	1 2 0 0
	>;
	tx-num-evt = <32>;
	rx-num-evt = <32>;
	};

	&mailbox5 {
	status = "okay";
	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
	status = "okay";
	};
	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
	status = "okay";
	};
	};

	&mailbox6 {
	status = "okay";
	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
	status = "okay";
	};
	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
	status = "okay";
	};
	};