| /* |
| * Low-level SLB routines |
| * |
| * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM |
| * |
| * Based on earlier C version: |
| * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com |
| * Copyright (c) 2001 Dave Engebretsen |
| * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <asm/processor.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/cputable.h> |
| #include <asm/page.h> |
| #include <asm/mmu.h> |
| #include <asm/pgtable.h> |
| #include <asm/firmware.h> |
| |
| /* |
| * This macro generates asm code to compute the VSID scramble |
| * function. Used in slb_allocate() and do_stab_bolted. The function |
| * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS |
| * |
| * rt = register containing the proto-VSID and into which the |
| * VSID will be stored |
| * rx = scratch register (clobbered) |
| * rf = flags |
| * |
| * - rt and rx must be different registers |
| * - The answer will end up in the low VSID_BITS bits of rt. The higher |
| * bits may contain other garbage, so you may need to mask the |
| * result. |
| */ |
| #define ASM_VSID_SCRAMBLE(rt, rx, rf, size) \ |
| lis rx,VSID_MULTIPLIER_##size@h; \ |
| ori rx,rx,VSID_MULTIPLIER_##size@l; \ |
| mulld rt,rt,rx; /* rt = rt * MULTIPLIER */ \ |
| /* \ |
| * powermac get slb fault before feature fixup, so make 65 bit part \ |
| * the default part of feature fixup \ |
| */ \ |
| BEGIN_MMU_FTR_SECTION \ |
| srdi rx,rt,VSID_BITS_65_##size; \ |
| clrldi rt,rt,(64-VSID_BITS_65_##size); \ |
| add rt,rt,rx; \ |
| addi rx,rt,1; \ |
| srdi rx,rx,VSID_BITS_65_##size; \ |
| add rt,rt,rx; \ |
| rldimi rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_65_##size)); \ |
| MMU_FTR_SECTION_ELSE \ |
| srdi rx,rt,VSID_BITS_##size; \ |
| clrldi rt,rt,(64-VSID_BITS_##size); \ |
| add rt,rt,rx; /* add high and low bits */ \ |
| addi rx,rt,1; \ |
| srdi rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */ \ |
| add rt,rt,rx; \ |
| rldimi rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_##size)); \ |
| ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_68_BIT_VA) |
| |
| |
| /* void slb_allocate(unsigned long ea); |
| * |
| * Create an SLB entry for the given EA (user or kernel). |
| * r3 = faulting address, r13 = PACA |
| * r9, r10, r11 are clobbered by this function |
| * r3 is preserved. |
| * No other registers are examined or changed. |
| */ |
| _GLOBAL(slb_allocate) |
| /* |
| * check for bad kernel/user address |
| * (ea & ~REGION_MASK) >= PGTABLE_RANGE |
| */ |
| rldicr. r9,r3,4,(63 - H_PGTABLE_EADDR_SIZE - 4) |
| bne- 8f |
| |
| srdi r9,r3,60 /* get region */ |
| srdi r10,r3,SID_SHIFT /* get esid */ |
| cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */ |
| |
| /* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */ |
| blt cr7,0f /* user or kernel? */ |
| |
| /* Check if hitting the linear mapping or some other kernel space |
| */ |
| bne cr7,1f |
| |
| /* Linear mapping encoding bits, the "li" instruction below will |
| * be patched by the kernel at boot |
| */ |
| .globl slb_miss_kernel_load_linear |
| slb_miss_kernel_load_linear: |
| li r11,0 |
| /* |
| * context = (ea >> 60) - (0xc - 1) |
| * r9 = region id. |
| */ |
| subi r9,r9,KERNEL_REGION_CONTEXT_OFFSET |
| |
| BEGIN_FTR_SECTION |
| b .Lslb_finish_load |
| END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) |
| b .Lslb_finish_load_1T |
| |
| 1: |
| #ifdef CONFIG_SPARSEMEM_VMEMMAP |
| cmpldi cr0,r9,0xf |
| bne 1f |
| /* Check virtual memmap region. To be patched at kernel boot */ |
| .globl slb_miss_kernel_load_vmemmap |
| slb_miss_kernel_load_vmemmap: |
| li r11,0 |
| b 6f |
| 1: |
| #endif /* CONFIG_SPARSEMEM_VMEMMAP */ |
| |
| /* vmalloc mapping gets the encoding from the PACA as the mapping |
| * can be demoted from 64K -> 4K dynamically on some machines |
| */ |
| clrldi r11,r10,48 |
| cmpldi r11,(H_VMALLOC_SIZE >> 28) - 1 |
| bgt 5f |
| lhz r11,PACAVMALLOCSLLP(r13) |
| b 6f |
| 5: |
| /* IO mapping */ |
| .globl slb_miss_kernel_load_io |
| slb_miss_kernel_load_io: |
| li r11,0 |
| 6: |
| /* |
| * context = (ea >> 60) - (0xc - 1) |
| * r9 = region id. |
| */ |
| subi r9,r9,KERNEL_REGION_CONTEXT_OFFSET |
| |
| BEGIN_FTR_SECTION |
| b .Lslb_finish_load |
| END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) |
| b .Lslb_finish_load_1T |
| |
| 0: /* |
| * For userspace addresses, make sure this is region 0. |
| */ |
| cmpdi r9, 0 |
| bne- 8f |
| /* |
| * user space make sure we are within the allowed limit |
| */ |
| ld r11,PACA_ADDR_LIMIT(r13) |
| cmpld r3,r11 |
| bge- 8f |
| |
| /* when using slices, we extract the psize off the slice bitmaps |
| * and then we need to get the sllp encoding off the mmu_psize_defs |
| * array. |
| * |
| * XXX This is a bit inefficient especially for the normal case, |
| * so we should try to implement a fast path for the standard page |
| * size using the old sllp value so we avoid the array. We cannot |
| * really do dynamic patching unfortunately as processes might flip |
| * between 4k and 64k standard page size |
| */ |
| #ifdef CONFIG_PPC_MM_SLICES |
| /* r10 have esid */ |
| cmpldi r10,16 |
| /* below SLICE_LOW_TOP */ |
| blt 5f |
| /* |
| * Handle hpsizes, |
| * r9 is get_paca()->context.high_slices_psize[index], r11 is mask_index |
| */ |
| srdi r11,r10,(SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT + 1) /* index */ |
| addi r9,r11,PACAHIGHSLICEPSIZE |
| lbzx r9,r13,r9 /* r9 is hpsizes[r11] */ |
| /* r11 = (r10 >> (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)) & 0x1 */ |
| rldicl r11,r10,(64 - (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)),63 |
| b 6f |
| |
| 5: |
| /* |
| * Handle lpsizes |
| * r9 is get_paca()->context.low_slices_psize, r11 is index |
| */ |
| ld r9,PACALOWSLICESPSIZE(r13) |
| mr r11,r10 |
| 6: |
| sldi r11,r11,2 /* index * 4 */ |
| /* Extract the psize and multiply to get an array offset */ |
| srd r9,r9,r11 |
| andi. r9,r9,0xf |
| mulli r9,r9,MMUPSIZEDEFSIZE |
| |
| /* Now get to the array and obtain the sllp |
| */ |
| ld r11,PACATOC(r13) |
| ld r11,mmu_psize_defs@got(r11) |
| add r11,r11,r9 |
| ld r11,MMUPSIZESLLP(r11) |
| ori r11,r11,SLB_VSID_USER |
| #else |
| /* paca context sllp already contains the SLB_VSID_USER bits */ |
| lhz r11,PACACONTEXTSLLP(r13) |
| #endif /* CONFIG_PPC_MM_SLICES */ |
| |
| ld r9,PACACONTEXTID(r13) |
| BEGIN_FTR_SECTION |
| cmpldi r10,0x1000 |
| bge .Lslb_finish_load_1T |
| END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) |
| b .Lslb_finish_load |
| |
| 8: /* invalid EA - return an error indication */ |
| crset 4*cr0+eq /* indicate failure */ |
| blr |
| |
| /* |
| * Finish loading of an SLB entry and return |
| * |
| * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET |
| */ |
| .Lslb_finish_load: |
| rldimi r10,r9,ESID_BITS,0 |
| ASM_VSID_SCRAMBLE(r10,r9,r11,256M) |
| /* r3 = EA, r11 = VSID data */ |
| /* |
| * Find a slot, round robin. Previously we tried to find a |
| * free slot first but that took too long. Unfortunately we |
| * dont have any LRU information to help us choose a slot. |
| */ |
| |
| mr r9,r3 |
| |
| /* slb_finish_load_1T continues here. r9=EA with non-ESID bits clear */ |
| 7: ld r10,PACASTABRR(r13) |
| addi r10,r10,1 |
| /* This gets soft patched on boot. */ |
| .globl slb_compare_rr_to_size |
| slb_compare_rr_to_size: |
| cmpldi r10,0 |
| |
| blt+ 4f |
| li r10,SLB_NUM_BOLTED |
| |
| 4: |
| std r10,PACASTABRR(r13) |
| |
| 3: |
| rldimi r9,r10,0,36 /* r9 = EA[0:35] | entry */ |
| oris r10,r9,SLB_ESID_V@h /* r10 = r9 | SLB_ESID_V */ |
| |
| /* r9 = ESID data, r11 = VSID data */ |
| |
| /* |
| * No need for an isync before or after this slbmte. The exception |
| * we enter with and the rfid we exit with are context synchronizing. |
| */ |
| slbmte r11,r10 |
| |
| /* we're done for kernel addresses */ |
| crclr 4*cr0+eq /* set result to "success" */ |
| bgelr cr7 |
| |
| /* Update the slb cache */ |
| lhz r9,PACASLBCACHEPTR(r13) /* offset = paca->slb_cache_ptr */ |
| cmpldi r9,SLB_CACHE_ENTRIES |
| bge 1f |
| |
| /* still room in the slb cache */ |
| sldi r11,r9,2 /* r11 = offset * sizeof(u32) */ |
| srdi r10,r10,28 /* get the 36 bits of the ESID */ |
| add r11,r11,r13 /* r11 = (u32 *)paca + offset */ |
| stw r10,PACASLBCACHE(r11) /* paca->slb_cache[offset] = esid */ |
| addi r9,r9,1 /* offset++ */ |
| b 2f |
| 1: /* offset >= SLB_CACHE_ENTRIES */ |
| li r9,SLB_CACHE_ENTRIES+1 |
| 2: |
| sth r9,PACASLBCACHEPTR(r13) /* paca->slb_cache_ptr = offset */ |
| crclr 4*cr0+eq /* set result to "success" */ |
| blr |
| |
| /* |
| * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return. |
| * |
| * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9 |
| */ |
| .Lslb_finish_load_1T: |
| srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */ |
| rldimi r10,r9,ESID_BITS_1T,0 |
| ASM_VSID_SCRAMBLE(r10,r9,r11,1T) |
| /* |
| * bits above VSID_BITS_1T need to be ignored from r10 |
| * also combine VSID and flags |
| */ |
| |
| li r10,MMU_SEGSIZE_1T |
| rldimi r11,r10,SLB_VSID_SSIZE_SHIFT,0 /* insert segment size */ |
| |
| /* r3 = EA, r11 = VSID data */ |
| clrrdi r9,r3,SID_SHIFT_1T /* clear out non-ESID bits */ |
| b 7b |
| |
| |
| _ASM_NOKPROBE_SYMBOL(slb_allocate) |
| _ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_linear) |
| _ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_io) |
| _ASM_NOKPROBE_SYMBOL(slb_compare_rr_to_size) |
| #ifdef CONFIG_SPARSEMEM_VMEMMAP |
| _ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_vmemmap) |
| #endif |