| /* |
| * This file contains the routines for flushing entries from the |
| * TLB and MMU hash table. |
| * |
| * Derived from arch/ppc64/mm/init.c: |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * |
| * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) |
| * and Cort Dougan (PReP) (cort@cs.nmt.edu) |
| * Copyright (C) 1996 Paul Mackerras |
| * |
| * Derived from "arch/i386/mm/init.c" |
| * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds |
| * |
| * Dave Engebretsen <engebret@us.ibm.com> |
| * Rework for PPC64 port. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <linux/percpu.h> |
| #include <linux/hardirq.h> |
| #include <asm/pgalloc.h> |
| #include <asm/tlbflush.h> |
| #include <asm/tlb.h> |
| #include <asm/bug.h> |
| |
| DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); |
| |
| /* |
| * A linux PTE was changed and the corresponding hash table entry |
| * neesd to be flushed. This function will either perform the flush |
| * immediately or will batch it up if the current CPU has an active |
| * batch on it. |
| */ |
| void hpte_need_flush(struct mm_struct *mm, unsigned long addr, |
| pte_t *ptep, unsigned long pte, int huge) |
| { |
| struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch); |
| unsigned long vsid, vaddr; |
| unsigned int psize; |
| int ssize; |
| real_pte_t rpte; |
| int i; |
| |
| i = batch->index; |
| |
| /* Get page size (maybe move back to caller). |
| * |
| * NOTE: when using special 64K mappings in 4K environment like |
| * for SPEs, we obtain the page size from the slice, which thus |
| * must still exist (and thus the VMA not reused) at the time |
| * of this call |
| */ |
| if (huge) { |
| #ifdef CONFIG_HUGETLB_PAGE |
| psize = get_slice_psize(mm, addr); |
| /* Mask the address for the correct page size */ |
| addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1); |
| #else |
| BUG(); |
| psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */ |
| #endif |
| } else { |
| psize = pte_pagesize_index(mm, addr, pte); |
| /* Mask the address for the standard page size. If we |
| * have a 64k page kernel, but the hardware does not |
| * support 64k pages, this might be different from the |
| * hardware page size encoded in the slice table. */ |
| addr &= PAGE_MASK; |
| } |
| |
| |
| /* Build full vaddr */ |
| if (!is_kernel_addr(addr)) { |
| ssize = user_segment_size(addr); |
| vsid = get_vsid(mm->context.id, addr, ssize); |
| WARN_ON(vsid == 0); |
| } else { |
| vsid = get_kernel_vsid(addr, mmu_kernel_ssize); |
| ssize = mmu_kernel_ssize; |
| } |
| vaddr = hpt_va(addr, vsid, ssize); |
| rpte = __real_pte(__pte(pte), ptep); |
| |
| /* |
| * Check if we have an active batch on this CPU. If not, just |
| * flush now and return. For now, we don global invalidates |
| * in that case, might be worth testing the mm cpu mask though |
| * and decide to use local invalidates instead... |
| */ |
| if (!batch->active) { |
| flush_hash_page(vaddr, rpte, psize, ssize, 0); |
| put_cpu_var(ppc64_tlb_batch); |
| return; |
| } |
| |
| /* |
| * This can happen when we are in the middle of a TLB batch and |
| * we encounter memory pressure (eg copy_page_range when it tries |
| * to allocate a new pte). If we have to reclaim memory and end |
| * up scanning and resetting referenced bits then our batch context |
| * will change mid stream. |
| * |
| * We also need to ensure only one page size is present in a given |
| * batch |
| */ |
| if (i != 0 && (mm != batch->mm || batch->psize != psize || |
| batch->ssize != ssize)) { |
| __flush_tlb_pending(batch); |
| i = 0; |
| } |
| if (i == 0) { |
| batch->mm = mm; |
| batch->psize = psize; |
| batch->ssize = ssize; |
| } |
| batch->pte[i] = rpte; |
| batch->vaddr[i] = vaddr; |
| batch->index = ++i; |
| if (i >= PPC64_TLB_BATCH_NR) |
| __flush_tlb_pending(batch); |
| put_cpu_var(ppc64_tlb_batch); |
| } |
| |
| /* |
| * This function is called when terminating an mmu batch or when a batch |
| * is full. It will perform the flush of all the entries currently stored |
| * in a batch. |
| * |
| * Must be called from within some kind of spinlock/non-preempt region... |
| */ |
| void __flush_tlb_pending(struct ppc64_tlb_batch *batch) |
| { |
| const struct cpumask *tmp; |
| int i, local = 0; |
| |
| i = batch->index; |
| tmp = cpumask_of(smp_processor_id()); |
| if (cpumask_equal(mm_cpumask(batch->mm), tmp)) |
| local = 1; |
| if (i == 1) |
| flush_hash_page(batch->vaddr[0], batch->pte[0], |
| batch->psize, batch->ssize, local); |
| else |
| flush_hash_range(i, local); |
| batch->index = 0; |
| } |
| |
| void tlb_flush(struct mmu_gather *tlb) |
| { |
| struct ppc64_tlb_batch *tlbbatch = &get_cpu_var(ppc64_tlb_batch); |
| |
| /* If there's a TLB batch pending, then we must flush it because the |
| * pages are going to be freed and we really don't want to have a CPU |
| * access a freed page because it has a stale TLB |
| */ |
| if (tlbbatch->index) |
| __flush_tlb_pending(tlbbatch); |
| |
| put_cpu_var(ppc64_tlb_batch); |
| |
| /* Push out batch of freed page tables */ |
| pte_free_finish(tlb); |
| } |
| |
| /** |
| * __flush_hash_table_range - Flush all HPTEs for a given address range |
| * from the hash table (and the TLB). But keeps |
| * the linux PTEs intact. |
| * |
| * @mm : mm_struct of the target address space (generally init_mm) |
| * @start : starting address |
| * @end : ending address (not included in the flush) |
| * |
| * This function is mostly to be used by some IO hotplug code in order |
| * to remove all hash entries from a given address range used to map IO |
| * space on a removed PCI-PCI bidge without tearing down the full mapping |
| * since 64K pages may overlap with other bridges when using 64K pages |
| * with 4K HW pages on IO space. |
| * |
| * Because of that usage pattern, it's only available with CONFIG_HOTPLUG |
| * and is implemented for small size rather than speed. |
| */ |
| #ifdef CONFIG_HOTPLUG |
| |
| void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, |
| unsigned long end) |
| { |
| unsigned long flags; |
| |
| start = _ALIGN_DOWN(start, PAGE_SIZE); |
| end = _ALIGN_UP(end, PAGE_SIZE); |
| |
| BUG_ON(!mm->pgd); |
| |
| /* Note: Normally, we should only ever use a batch within a |
| * PTE locked section. This violates the rule, but will work |
| * since we don't actually modify the PTEs, we just flush the |
| * hash while leaving the PTEs intact (including their reference |
| * to being hashed). This is not the most performance oriented |
| * way to do things but is fine for our needs here. |
| */ |
| local_irq_save(flags); |
| arch_enter_lazy_mmu_mode(); |
| for (; start < end; start += PAGE_SIZE) { |
| pte_t *ptep = find_linux_pte(mm->pgd, start); |
| unsigned long pte; |
| |
| if (ptep == NULL) |
| continue; |
| pte = pte_val(*ptep); |
| if (!(pte & _PAGE_HASHPTE)) |
| continue; |
| hpte_need_flush(mm, start, ptep, pte, 0); |
| } |
| arch_leave_lazy_mmu_mode(); |
| local_irq_restore(flags); |
| } |
| |
| #endif /* CONFIG_HOTPLUG */ |