| /* |
| * linux/arch/x86_64/nmi.c |
| * |
| * NMI watchdog support on APIC systems |
| * |
| * Started by Ingo Molnar <mingo@redhat.com> |
| * |
| * Fixes: |
| * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. |
| * Mikael Pettersson : Power Management for local APIC NMI watchdog. |
| * Pavel Machek and |
| * Mikael Pettersson : PM converted to driver model. Disable/enable API. |
| */ |
| |
| #include <linux/nmi.h> |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/sysdev.h> |
| #include <linux/sysctl.h> |
| #include <linux/kprobes.h> |
| #include <linux/cpumask.h> |
| |
| #include <asm/smp.h> |
| #include <asm/nmi.h> |
| #include <asm/proto.h> |
| #include <asm/kdebug.h> |
| #include <asm/mce.h> |
| #include <asm/intel_arch_perfmon.h> |
| |
| int unknown_nmi_panic; |
| int nmi_watchdog_enabled; |
| int panic_on_unrecovered_nmi; |
| |
| /* perfctr_nmi_owner tracks the ownership of the perfctr registers: |
| * evtsel_nmi_owner tracks the ownership of the event selection |
| * - different performance counters/ event selection may be reserved for |
| * different subsystems this reservation system just tries to coordinate |
| * things a little |
| */ |
| |
| /* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's |
| * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now) |
| */ |
| #define NMI_MAX_COUNTER_BITS 66 |
| #define NMI_MAX_COUNTER_LONGS BITS_TO_LONGS(NMI_MAX_COUNTER_BITS) |
| |
| static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner[NMI_MAX_COUNTER_LONGS]); |
| static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[NMI_MAX_COUNTER_LONGS]); |
| |
| static cpumask_t backtrace_mask = CPU_MASK_NONE; |
| |
| /* nmi_active: |
| * >0: the lapic NMI watchdog is active, but can be disabled |
| * <0: the lapic NMI watchdog has not been set up, and cannot |
| * be enabled |
| * 0: the lapic NMI watchdog is disabled, but can be enabled |
| */ |
| atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ |
| int panic_on_timeout; |
| |
| unsigned int nmi_watchdog = NMI_DEFAULT; |
| static unsigned int nmi_hz = HZ; |
| |
| struct nmi_watchdog_ctlblk { |
| int enabled; |
| u64 check_bit; |
| unsigned int cccr_msr; |
| unsigned int perfctr_msr; /* the MSR to reset in NMI handler */ |
| unsigned int evntsel_msr; /* the MSR to select the events to handle */ |
| }; |
| static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk); |
| |
| /* local prototypes */ |
| static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); |
| |
| /* converts an msr to an appropriate reservation bit */ |
| static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) |
| { |
| /* returns the bit offset of the performance counter register */ |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| return (msr - MSR_K7_PERFCTR0); |
| case X86_VENDOR_INTEL: |
| if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) |
| return (msr - MSR_ARCH_PERFMON_PERFCTR0); |
| else |
| return (msr - MSR_P4_BPU_PERFCTR0); |
| } |
| return 0; |
| } |
| |
| /* converts an msr to an appropriate reservation bit */ |
| static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr) |
| { |
| /* returns the bit offset of the event selection register */ |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| return (msr - MSR_K7_EVNTSEL0); |
| case X86_VENDOR_INTEL: |
| if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) |
| return (msr - MSR_ARCH_PERFMON_EVENTSEL0); |
| else |
| return (msr - MSR_P4_BSU_ESCR0); |
| } |
| return 0; |
| } |
| |
| /* checks for a bit availability (hack for oprofile) */ |
| int avail_to_resrv_perfctr_nmi_bit(unsigned int counter) |
| { |
| int cpu; |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| for_each_possible_cpu (cpu) { |
| if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu))) |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* checks the an msr for availability */ |
| int avail_to_resrv_perfctr_nmi(unsigned int msr) |
| { |
| unsigned int counter; |
| int cpu; |
| |
| counter = nmi_perfctr_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| for_each_possible_cpu (cpu) { |
| if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu))) |
| return 0; |
| } |
| return 1; |
| } |
| |
| static int __reserve_perfctr_nmi(int cpu, unsigned int msr) |
| { |
| unsigned int counter; |
| if (cpu < 0) |
| cpu = smp_processor_id(); |
| |
| counter = nmi_perfctr_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| if (!test_and_set_bit(counter, &per_cpu(perfctr_nmi_owner, cpu))) |
| return 1; |
| return 0; |
| } |
| |
| static void __release_perfctr_nmi(int cpu, unsigned int msr) |
| { |
| unsigned int counter; |
| if (cpu < 0) |
| cpu = smp_processor_id(); |
| |
| counter = nmi_perfctr_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| clear_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)); |
| } |
| |
| int reserve_perfctr_nmi(unsigned int msr) |
| { |
| int cpu, i; |
| for_each_possible_cpu (cpu) { |
| if (!__reserve_perfctr_nmi(cpu, msr)) { |
| for_each_possible_cpu (i) { |
| if (i >= cpu) |
| break; |
| __release_perfctr_nmi(i, msr); |
| } |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| void release_perfctr_nmi(unsigned int msr) |
| { |
| int cpu; |
| for_each_possible_cpu (cpu) |
| __release_perfctr_nmi(cpu, msr); |
| } |
| |
| int __reserve_evntsel_nmi(int cpu, unsigned int msr) |
| { |
| unsigned int counter; |
| if (cpu < 0) |
| cpu = smp_processor_id(); |
| |
| counter = nmi_evntsel_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| if (!test_and_set_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0])) |
| return 1; |
| return 0; |
| } |
| |
| static void __release_evntsel_nmi(int cpu, unsigned int msr) |
| { |
| unsigned int counter; |
| if (cpu < 0) |
| cpu = smp_processor_id(); |
| |
| counter = nmi_evntsel_msr_to_bit(msr); |
| BUG_ON(counter > NMI_MAX_COUNTER_BITS); |
| |
| clear_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]); |
| } |
| |
| int reserve_evntsel_nmi(unsigned int msr) |
| { |
| int cpu, i; |
| for_each_possible_cpu (cpu) { |
| if (!__reserve_evntsel_nmi(cpu, msr)) { |
| for_each_possible_cpu (i) { |
| if (i >= cpu) |
| break; |
| __release_evntsel_nmi(i, msr); |
| } |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| void release_evntsel_nmi(unsigned int msr) |
| { |
| int cpu; |
| for_each_possible_cpu (cpu) { |
| __release_evntsel_nmi(cpu, msr); |
| } |
| } |
| |
| static __cpuinit inline int nmi_known_cpu(void) |
| { |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| return boot_cpu_data.x86 == 15 || boot_cpu_data.x86 == 16; |
| case X86_VENDOR_INTEL: |
| if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) |
| return 1; |
| else |
| return (boot_cpu_data.x86 == 15); |
| } |
| return 0; |
| } |
| |
| /* Run after command line and cpu_init init, but before all other checks */ |
| void nmi_watchdog_default(void) |
| { |
| if (nmi_watchdog != NMI_DEFAULT) |
| return; |
| nmi_watchdog = NMI_NONE; |
| } |
| |
| static int endflag __initdata = 0; |
| |
| #ifdef CONFIG_SMP |
| /* The performance counters used by NMI_LOCAL_APIC don't trigger when |
| * the CPU is idle. To make sure the NMI watchdog really ticks on all |
| * CPUs during the test make them busy. |
| */ |
| static __init void nmi_cpu_busy(void *data) |
| { |
| local_irq_enable_in_hardirq(); |
| /* Intentionally don't use cpu_relax here. This is |
| to make sure that the performance counter really ticks, |
| even if there is a simulator or similar that catches the |
| pause instruction. On a real HT machine this is fine because |
| all other CPUs are busy with "useless" delay loops and don't |
| care if they get somewhat less cycles. */ |
| while (endflag == 0) |
| mb(); |
| } |
| #endif |
| |
| static unsigned int adjust_for_32bit_ctr(unsigned int hz) |
| { |
| unsigned int retval = hz; |
| |
| /* |
| * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter |
| * are writable, with higher bits sign extending from bit 31. |
| * So, we can only program the counter with 31 bit values and |
| * 32nd bit should be 1, for 33.. to be 1. |
| * Find the appropriate nmi_hz |
| */ |
| if ((((u64)cpu_khz * 1000) / retval) > 0x7fffffffULL) { |
| retval = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1; |
| } |
| return retval; |
| } |
| |
| int __init check_nmi_watchdog (void) |
| { |
| int *counts; |
| int cpu; |
| |
| if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT)) |
| return 0; |
| |
| if (!atomic_read(&nmi_active)) |
| return 0; |
| |
| counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); |
| if (!counts) |
| return -1; |
| |
| printk(KERN_INFO "testing NMI watchdog ... "); |
| |
| #ifdef CONFIG_SMP |
| if (nmi_watchdog == NMI_LOCAL_APIC) |
| smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); |
| #endif |
| |
| for (cpu = 0; cpu < NR_CPUS; cpu++) |
| counts[cpu] = cpu_pda(cpu)->__nmi_count; |
| local_irq_enable(); |
| mdelay((20*1000)/nmi_hz); // wait 20 ticks |
| |
| for_each_online_cpu(cpu) { |
| if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled) |
| continue; |
| if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) { |
| printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", |
| cpu, |
| counts[cpu], |
| cpu_pda(cpu)->__nmi_count); |
| per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0; |
| atomic_dec(&nmi_active); |
| } |
| } |
| if (!atomic_read(&nmi_active)) { |
| kfree(counts); |
| atomic_set(&nmi_active, -1); |
| endflag = 1; |
| return -1; |
| } |
| endflag = 1; |
| printk("OK.\n"); |
| |
| /* now that we know it works we can reduce NMI frequency to |
| something more reasonable; makes a difference in some configs */ |
| if (nmi_watchdog == NMI_LOCAL_APIC) { |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| nmi_hz = 1; |
| if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR1) |
| nmi_hz = adjust_for_32bit_ctr(nmi_hz); |
| } |
| |
| kfree(counts); |
| return 0; |
| } |
| |
| int __init setup_nmi_watchdog(char *str) |
| { |
| int nmi; |
| |
| if (!strncmp(str,"panic",5)) { |
| panic_on_timeout = 1; |
| str = strchr(str, ','); |
| if (!str) |
| return 1; |
| ++str; |
| } |
| |
| get_option(&str, &nmi); |
| |
| if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) |
| return 0; |
| |
| nmi_watchdog = nmi; |
| return 1; |
| } |
| |
| __setup("nmi_watchdog=", setup_nmi_watchdog); |
| |
| static void disable_lapic_nmi_watchdog(void) |
| { |
| BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); |
| |
| if (atomic_read(&nmi_active) <= 0) |
| return; |
| |
| on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); |
| |
| BUG_ON(atomic_read(&nmi_active) != 0); |
| } |
| |
| static void enable_lapic_nmi_watchdog(void) |
| { |
| BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); |
| |
| /* are we already enabled */ |
| if (atomic_read(&nmi_active) != 0) |
| return; |
| |
| /* are we lapic aware */ |
| if (nmi_known_cpu() <= 0) |
| return; |
| |
| on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); |
| touch_nmi_watchdog(); |
| } |
| |
| void disable_timer_nmi_watchdog(void) |
| { |
| BUG_ON(nmi_watchdog != NMI_IO_APIC); |
| |
| if (atomic_read(&nmi_active) <= 0) |
| return; |
| |
| disable_irq(0); |
| on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); |
| |
| BUG_ON(atomic_read(&nmi_active) != 0); |
| } |
| |
| void enable_timer_nmi_watchdog(void) |
| { |
| BUG_ON(nmi_watchdog != NMI_IO_APIC); |
| |
| if (atomic_read(&nmi_active) == 0) { |
| touch_nmi_watchdog(); |
| on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); |
| enable_irq(0); |
| } |
| } |
| |
| static void __acpi_nmi_disable(void *__unused) |
| { |
| apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); |
| } |
| |
| /* |
| * Disable timer based NMIs on all CPUs: |
| */ |
| void acpi_nmi_disable(void) |
| { |
| if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) |
| on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); |
| } |
| |
| static void __acpi_nmi_enable(void *__unused) |
| { |
| apic_write(APIC_LVT0, APIC_DM_NMI); |
| } |
| |
| /* |
| * Enable timer based NMIs on all CPUs: |
| */ |
| void acpi_nmi_enable(void) |
| { |
| if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) |
| on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); |
| } |
| #ifdef CONFIG_PM |
| |
| static int nmi_pm_active; /* nmi_active before suspend */ |
| |
| static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) |
| { |
| /* only CPU0 goes here, other CPUs should be offline */ |
| nmi_pm_active = atomic_read(&nmi_active); |
| stop_apic_nmi_watchdog(NULL); |
| BUG_ON(atomic_read(&nmi_active) != 0); |
| return 0; |
| } |
| |
| static int lapic_nmi_resume(struct sys_device *dev) |
| { |
| /* only CPU0 goes here, other CPUs should be offline */ |
| if (nmi_pm_active > 0) { |
| setup_apic_nmi_watchdog(NULL); |
| touch_nmi_watchdog(); |
| } |
| return 0; |
| } |
| |
| static struct sysdev_class nmi_sysclass = { |
| set_kset_name("lapic_nmi"), |
| .resume = lapic_nmi_resume, |
| .suspend = lapic_nmi_suspend, |
| }; |
| |
| static struct sys_device device_lapic_nmi = { |
| .id = 0, |
| .cls = &nmi_sysclass, |
| }; |
| |
| static int __init init_lapic_nmi_sysfs(void) |
| { |
| int error; |
| |
| /* should really be a BUG_ON but b/c this is an |
| * init call, it just doesn't work. -dcz |
| */ |
| if (nmi_watchdog != NMI_LOCAL_APIC) |
| return 0; |
| |
| if ( atomic_read(&nmi_active) < 0 ) |
| return 0; |
| |
| error = sysdev_class_register(&nmi_sysclass); |
| if (!error) |
| error = sysdev_register(&device_lapic_nmi); |
| return error; |
| } |
| /* must come after the local APIC's device_initcall() */ |
| late_initcall(init_lapic_nmi_sysfs); |
| |
| #endif /* CONFIG_PM */ |
| |
| /* |
| * Activate the NMI watchdog via the local APIC. |
| * Original code written by Keith Owens. |
| */ |
| |
| /* Note that these events don't tick when the CPU idles. This means |
| the frequency varies with CPU load. */ |
| |
| #define K7_EVNTSEL_ENABLE (1 << 22) |
| #define K7_EVNTSEL_INT (1 << 20) |
| #define K7_EVNTSEL_OS (1 << 17) |
| #define K7_EVNTSEL_USR (1 << 16) |
| #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 |
| #define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING |
| |
| static int setup_k7_watchdog(void) |
| { |
| unsigned int perfctr_msr, evntsel_msr; |
| unsigned int evntsel; |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| perfctr_msr = MSR_K7_PERFCTR0; |
| evntsel_msr = MSR_K7_EVNTSEL0; |
| if (!__reserve_perfctr_nmi(-1, perfctr_msr)) |
| goto fail; |
| |
| if (!__reserve_evntsel_nmi(-1, evntsel_msr)) |
| goto fail1; |
| |
| /* Simulator may not support it */ |
| if (checking_wrmsrl(evntsel_msr, 0UL)) |
| goto fail2; |
| wrmsrl(perfctr_msr, 0UL); |
| |
| evntsel = K7_EVNTSEL_INT |
| | K7_EVNTSEL_OS |
| | K7_EVNTSEL_USR |
| | K7_NMI_EVENT; |
| |
| /* setup the timer */ |
| wrmsr(evntsel_msr, evntsel, 0); |
| wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| evntsel |= K7_EVNTSEL_ENABLE; |
| wrmsr(evntsel_msr, evntsel, 0); |
| |
| wd->perfctr_msr = perfctr_msr; |
| wd->evntsel_msr = evntsel_msr; |
| wd->cccr_msr = 0; //unused |
| wd->check_bit = 1ULL<<63; |
| return 1; |
| fail2: |
| __release_evntsel_nmi(-1, evntsel_msr); |
| fail1: |
| __release_perfctr_nmi(-1, perfctr_msr); |
| fail: |
| return 0; |
| } |
| |
| static void stop_k7_watchdog(void) |
| { |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| wrmsr(wd->evntsel_msr, 0, 0); |
| |
| __release_evntsel_nmi(-1, wd->evntsel_msr); |
| __release_perfctr_nmi(-1, wd->perfctr_msr); |
| } |
| |
| /* Note that these events don't tick when the CPU idles. This means |
| the frequency varies with CPU load. */ |
| |
| #define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) |
| #define P4_ESCR_EVENT_SELECT(N) ((N)<<25) |
| #define P4_ESCR_OS (1<<3) |
| #define P4_ESCR_USR (1<<2) |
| #define P4_CCCR_OVF_PMI0 (1<<26) |
| #define P4_CCCR_OVF_PMI1 (1<<27) |
| #define P4_CCCR_THRESHOLD(N) ((N)<<20) |
| #define P4_CCCR_COMPLEMENT (1<<19) |
| #define P4_CCCR_COMPARE (1<<18) |
| #define P4_CCCR_REQUIRED (3<<16) |
| #define P4_CCCR_ESCR_SELECT(N) ((N)<<13) |
| #define P4_CCCR_ENABLE (1<<12) |
| #define P4_CCCR_OVF (1<<31) |
| /* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter |
| CRU_ESCR0 (with any non-null event selector) through a complemented |
| max threshold. [IA32-Vol3, Section 14.9.9] */ |
| |
| static int setup_p4_watchdog(void) |
| { |
| unsigned int perfctr_msr, evntsel_msr, cccr_msr; |
| unsigned int evntsel, cccr_val; |
| unsigned int misc_enable, dummy; |
| unsigned int ht_num; |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy); |
| if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) |
| return 0; |
| |
| #ifdef CONFIG_SMP |
| /* detect which hyperthread we are on */ |
| if (smp_num_siblings == 2) { |
| unsigned int ebx, apicid; |
| |
| ebx = cpuid_ebx(1); |
| apicid = (ebx >> 24) & 0xff; |
| ht_num = apicid & 1; |
| } else |
| #endif |
| ht_num = 0; |
| |
| /* performance counters are shared resources |
| * assign each hyperthread its own set |
| * (re-use the ESCR0 register, seems safe |
| * and keeps the cccr_val the same) |
| */ |
| if (!ht_num) { |
| /* logical cpu 0 */ |
| perfctr_msr = MSR_P4_IQ_PERFCTR0; |
| evntsel_msr = MSR_P4_CRU_ESCR0; |
| cccr_msr = MSR_P4_IQ_CCCR0; |
| cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); |
| } else { |
| /* logical cpu 1 */ |
| perfctr_msr = MSR_P4_IQ_PERFCTR1; |
| evntsel_msr = MSR_P4_CRU_ESCR0; |
| cccr_msr = MSR_P4_IQ_CCCR1; |
| cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4); |
| } |
| |
| if (!__reserve_perfctr_nmi(-1, perfctr_msr)) |
| goto fail; |
| |
| if (!__reserve_evntsel_nmi(-1, evntsel_msr)) |
| goto fail1; |
| |
| evntsel = P4_ESCR_EVENT_SELECT(0x3F) |
| | P4_ESCR_OS |
| | P4_ESCR_USR; |
| |
| cccr_val |= P4_CCCR_THRESHOLD(15) |
| | P4_CCCR_COMPLEMENT |
| | P4_CCCR_COMPARE |
| | P4_CCCR_REQUIRED; |
| |
| wrmsr(evntsel_msr, evntsel, 0); |
| wrmsr(cccr_msr, cccr_val, 0); |
| wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| cccr_val |= P4_CCCR_ENABLE; |
| wrmsr(cccr_msr, cccr_val, 0); |
| |
| wd->perfctr_msr = perfctr_msr; |
| wd->evntsel_msr = evntsel_msr; |
| wd->cccr_msr = cccr_msr; |
| wd->check_bit = 1ULL<<39; |
| return 1; |
| fail1: |
| __release_perfctr_nmi(-1, perfctr_msr); |
| fail: |
| return 0; |
| } |
| |
| static void stop_p4_watchdog(void) |
| { |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| wrmsr(wd->cccr_msr, 0, 0); |
| wrmsr(wd->evntsel_msr, 0, 0); |
| |
| __release_evntsel_nmi(-1, wd->evntsel_msr); |
| __release_perfctr_nmi(-1, wd->perfctr_msr); |
| } |
| |
| #define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL |
| #define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK |
| |
| static int setup_intel_arch_watchdog(void) |
| { |
| unsigned int ebx; |
| union cpuid10_eax eax; |
| unsigned int unused; |
| unsigned int perfctr_msr, evntsel_msr; |
| unsigned int evntsel; |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| /* |
| * Check whether the Architectural PerfMon supports |
| * Unhalted Core Cycles Event or not. |
| * NOTE: Corresponding bit = 0 in ebx indicates event present. |
| */ |
| cpuid(10, &(eax.full), &ebx, &unused, &unused); |
| if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || |
| (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) |
| goto fail; |
| |
| perfctr_msr = MSR_ARCH_PERFMON_PERFCTR1; |
| evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL1; |
| |
| if (!__reserve_perfctr_nmi(-1, perfctr_msr)) |
| goto fail; |
| |
| if (!__reserve_evntsel_nmi(-1, evntsel_msr)) |
| goto fail1; |
| |
| wrmsrl(perfctr_msr, 0UL); |
| |
| evntsel = ARCH_PERFMON_EVENTSEL_INT |
| | ARCH_PERFMON_EVENTSEL_OS |
| | ARCH_PERFMON_EVENTSEL_USR |
| | ARCH_PERFMON_NMI_EVENT_SEL |
| | ARCH_PERFMON_NMI_EVENT_UMASK; |
| |
| /* setup the timer */ |
| wrmsr(evntsel_msr, evntsel, 0); |
| |
| nmi_hz = adjust_for_32bit_ctr(nmi_hz); |
| wrmsr(perfctr_msr, (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0); |
| |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; |
| wrmsr(evntsel_msr, evntsel, 0); |
| |
| wd->perfctr_msr = perfctr_msr; |
| wd->evntsel_msr = evntsel_msr; |
| wd->cccr_msr = 0; //unused |
| wd->check_bit = 1ULL << (eax.split.bit_width - 1); |
| return 1; |
| fail1: |
| __release_perfctr_nmi(-1, perfctr_msr); |
| fail: |
| return 0; |
| } |
| |
| static void stop_intel_arch_watchdog(void) |
| { |
| unsigned int ebx; |
| union cpuid10_eax eax; |
| unsigned int unused; |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| /* |
| * Check whether the Architectural PerfMon supports |
| * Unhalted Core Cycles Event or not. |
| * NOTE: Corresponding bit = 0 in ebx indicates event present. |
| */ |
| cpuid(10, &(eax.full), &ebx, &unused, &unused); |
| if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || |
| (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) |
| return; |
| |
| wrmsr(wd->evntsel_msr, 0, 0); |
| |
| __release_evntsel_nmi(-1, wd->evntsel_msr); |
| __release_perfctr_nmi(-1, wd->perfctr_msr); |
| } |
| |
| void setup_apic_nmi_watchdog(void *unused) |
| { |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| /* only support LOCAL and IO APICs for now */ |
| if ((nmi_watchdog != NMI_LOCAL_APIC) && |
| (nmi_watchdog != NMI_IO_APIC)) |
| return; |
| |
| if (wd->enabled == 1) |
| return; |
| |
| /* cheap hack to support suspend/resume */ |
| /* if cpu0 is not active neither should the other cpus */ |
| if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) |
| return; |
| |
| if (nmi_watchdog == NMI_LOCAL_APIC) { |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| if (strstr(boot_cpu_data.x86_model_id, "Screwdriver")) |
| return; |
| if (!setup_k7_watchdog()) |
| return; |
| break; |
| case X86_VENDOR_INTEL: |
| if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { |
| if (!setup_intel_arch_watchdog()) |
| return; |
| break; |
| } |
| if (!setup_p4_watchdog()) |
| return; |
| break; |
| default: |
| return; |
| } |
| } |
| wd->enabled = 1; |
| atomic_inc(&nmi_active); |
| } |
| |
| void stop_apic_nmi_watchdog(void *unused) |
| { |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| |
| /* only support LOCAL and IO APICs for now */ |
| if ((nmi_watchdog != NMI_LOCAL_APIC) && |
| (nmi_watchdog != NMI_IO_APIC)) |
| return; |
| |
| if (wd->enabled == 0) |
| return; |
| |
| if (nmi_watchdog == NMI_LOCAL_APIC) { |
| switch (boot_cpu_data.x86_vendor) { |
| case X86_VENDOR_AMD: |
| if (strstr(boot_cpu_data.x86_model_id, "Screwdriver")) |
| return; |
| stop_k7_watchdog(); |
| break; |
| case X86_VENDOR_INTEL: |
| if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { |
| stop_intel_arch_watchdog(); |
| break; |
| } |
| stop_p4_watchdog(); |
| break; |
| default: |
| return; |
| } |
| } |
| wd->enabled = 0; |
| atomic_dec(&nmi_active); |
| } |
| |
| /* |
| * the best way to detect whether a CPU has a 'hard lockup' problem |
| * is to check it's local APIC timer IRQ counts. If they are not |
| * changing then that CPU has some problem. |
| * |
| * as these watchdog NMI IRQs are generated on every CPU, we only |
| * have to check the current processor. |
| */ |
| |
| static DEFINE_PER_CPU(unsigned, last_irq_sum); |
| static DEFINE_PER_CPU(local_t, alert_counter); |
| static DEFINE_PER_CPU(int, nmi_touch); |
| |
| void touch_nmi_watchdog (void) |
| { |
| if (nmi_watchdog > 0) { |
| unsigned cpu; |
| |
| /* |
| * Tell other CPUs to reset their alert counters. We cannot |
| * do it ourselves because the alert count increase is not |
| * atomic. |
| */ |
| for_each_present_cpu (cpu) |
| per_cpu(nmi_touch, cpu) = 1; |
| } |
| |
| touch_softlockup_watchdog(); |
| } |
| |
| int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) |
| { |
| int sum; |
| int touched = 0; |
| int cpu = smp_processor_id(); |
| struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); |
| u64 dummy; |
| int rc=0; |
| |
| /* check for other users first */ |
| if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) |
| == NOTIFY_STOP) { |
| rc = 1; |
| touched = 1; |
| } |
| |
| sum = read_pda(apic_timer_irqs); |
| if (__get_cpu_var(nmi_touch)) { |
| __get_cpu_var(nmi_touch) = 0; |
| touched = 1; |
| } |
| |
| if (cpu_isset(cpu, backtrace_mask)) { |
| static DEFINE_SPINLOCK(lock); /* Serialise the printks */ |
| |
| spin_lock(&lock); |
| printk("NMI backtrace for cpu %d\n", cpu); |
| dump_stack(); |
| spin_unlock(&lock); |
| cpu_clear(cpu, backtrace_mask); |
| } |
| |
| #ifdef CONFIG_X86_MCE |
| /* Could check oops_in_progress here too, but it's safer |
| not too */ |
| if (atomic_read(&mce_entry) > 0) |
| touched = 1; |
| #endif |
| /* if the apic timer isn't firing, this cpu isn't doing much */ |
| if (!touched && __get_cpu_var(last_irq_sum) == sum) { |
| /* |
| * Ayiee, looks like this CPU is stuck ... |
| * wait a few IRQs (5 seconds) before doing the oops ... |
| */ |
| local_inc(&__get_cpu_var(alert_counter)); |
| if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) |
| die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs, |
| panic_on_timeout); |
| } else { |
| __get_cpu_var(last_irq_sum) = sum; |
| local_set(&__get_cpu_var(alert_counter), 0); |
| } |
| |
| /* see if the nmi watchdog went off */ |
| if (wd->enabled) { |
| if (nmi_watchdog == NMI_LOCAL_APIC) { |
| rdmsrl(wd->perfctr_msr, dummy); |
| if (dummy & wd->check_bit){ |
| /* this wasn't a watchdog timer interrupt */ |
| goto done; |
| } |
| |
| /* only Intel uses the cccr msr */ |
| if (wd->cccr_msr != 0) { |
| /* |
| * P4 quirks: |
| * - An overflown perfctr will assert its interrupt |
| * until the OVF flag in its CCCR is cleared. |
| * - LVTPC is masked on interrupt and must be |
| * unmasked by the LVTPC handler. |
| */ |
| rdmsrl(wd->cccr_msr, dummy); |
| dummy &= ~P4_CCCR_OVF; |
| wrmsrl(wd->cccr_msr, dummy); |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| /* start the cycle over again */ |
| wrmsrl(wd->perfctr_msr, |
| -((u64)cpu_khz * 1000 / nmi_hz)); |
| } else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR1) { |
| /* |
| * ArchPerfom/Core Duo needs to re-unmask |
| * the apic vector |
| */ |
| apic_write(APIC_LVTPC, APIC_DM_NMI); |
| /* ARCH_PERFMON has 32 bit counter writes */ |
| wrmsr(wd->perfctr_msr, |
| (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0); |
| } else { |
| /* start the cycle over again */ |
| wrmsrl(wd->perfctr_msr, |
| -((u64)cpu_khz * 1000 / nmi_hz)); |
| } |
| rc = 1; |
| } else if (nmi_watchdog == NMI_IO_APIC) { |
| /* don't know how to accurately check for this. |
| * just assume it was a watchdog timer interrupt |
| * This matches the old behaviour. |
| */ |
| rc = 1; |
| } else |
| printk(KERN_WARNING "Unknown enabled NMI hardware?!\n"); |
| } |
| done: |
| return rc; |
| } |
| |
| asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code) |
| { |
| nmi_enter(); |
| add_pda(__nmi_count,1); |
| default_do_nmi(regs); |
| nmi_exit(); |
| } |
| |
| int do_nmi_callback(struct pt_regs * regs, int cpu) |
| { |
| #ifdef CONFIG_SYSCTL |
| if (unknown_nmi_panic) |
| return unknown_nmi_panic_callback(regs, cpu); |
| #endif |
| return 0; |
| } |
| |
| #ifdef CONFIG_SYSCTL |
| |
| static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) |
| { |
| unsigned char reason = get_nmi_reason(); |
| char buf[64]; |
| |
| sprintf(buf, "NMI received for unknown reason %02x\n", reason); |
| die_nmi(buf, regs, 1); /* Always panic here */ |
| return 0; |
| } |
| |
| /* |
| * proc handler for /proc/sys/kernel/nmi |
| */ |
| int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, |
| void __user *buffer, size_t *length, loff_t *ppos) |
| { |
| int old_state; |
| |
| nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; |
| old_state = nmi_watchdog_enabled; |
| proc_dointvec(table, write, file, buffer, length, ppos); |
| if (!!old_state == !!nmi_watchdog_enabled) |
| return 0; |
| |
| if (atomic_read(&nmi_active) < 0) { |
| printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); |
| return -EIO; |
| } |
| |
| /* if nmi_watchdog is not set yet, then set it */ |
| nmi_watchdog_default(); |
| |
| if (nmi_watchdog == NMI_LOCAL_APIC) { |
| if (nmi_watchdog_enabled) |
| enable_lapic_nmi_watchdog(); |
| else |
| disable_lapic_nmi_watchdog(); |
| } else { |
| printk( KERN_WARNING |
| "NMI watchdog doesn't know what hardware to touch\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| #endif |
| |
| void __trigger_all_cpu_backtrace(void) |
| { |
| int i; |
| |
| backtrace_mask = cpu_online_map; |
| /* Wait for up to 10 seconds for all CPUs to do the backtrace */ |
| for (i = 0; i < 10 * 1000; i++) { |
| if (cpus_empty(backtrace_mask)) |
| break; |
| mdelay(1); |
| } |
| } |
| |
| EXPORT_SYMBOL(nmi_active); |
| EXPORT_SYMBOL(nmi_watchdog); |
| EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi); |
| EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit); |
| EXPORT_SYMBOL(reserve_perfctr_nmi); |
| EXPORT_SYMBOL(release_perfctr_nmi); |
| EXPORT_SYMBOL(reserve_evntsel_nmi); |
| EXPORT_SYMBOL(release_evntsel_nmi); |
| EXPORT_SYMBOL(disable_timer_nmi_watchdog); |
| EXPORT_SYMBOL(enable_timer_nmi_watchdog); |
| EXPORT_SYMBOL(touch_nmi_watchdog); |