| /* |
| * Copyright 2013-2014 Texas Instruments, Inc. |
| * |
| * Keystone 2 Edison soc device tree |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <dt-bindings/reset/ti-syscon.h> |
| |
| / { |
| compatible = "ti,k2e", "ti,keystone"; |
| model = "Texas Instruments Keystone 2 Edison SoC"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| interrupt-parent = <&gic>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a15"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "arm,cortex-a15"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| |
| cpu@2 { |
| compatible = "arm,cortex-a15"; |
| device_type = "cpu"; |
| reg = <2>; |
| }; |
| |
| cpu@3 { |
| compatible = "arm,cortex-a15"; |
| device_type = "cpu"; |
| reg = <3>; |
| }; |
| }; |
| |
| aliases { |
| rproc0 = &dsp0; |
| }; |
| |
| soc { |
| /include/ "keystone-k2e-clocks.dtsi" |
| |
| usb: usb@2680000 { |
| interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; |
| dwc3@2690000 { |
| interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| |
| usb1_phy: usb_phy@2620750 { |
| compatible = "ti,keystone-usbphy"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x2620750 24>; |
| status = "disabled"; |
| }; |
| |
| keystone_usb1: usb@25000000 { |
| compatible = "ti,keystone-dwc3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x25000000 0x10000>; |
| clocks = <&clkusb1>; |
| clock-names = "usb"; |
| interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>; |
| ranges; |
| dma-coherent; |
| dma-ranges; |
| status = "disabled"; |
| |
| usb1: dwc3@25010000 { |
| compatible = "synopsys,dwc3"; |
| reg = <0x25010000 0x70000>; |
| interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>; |
| usb-phy = <&usb1_phy>, <&usb1_phy>; |
| }; |
| }; |
| |
| msm_ram: msmram@0c000000 { |
| compatible = "mmio-sram"; |
| reg = <0x0c000000 0x200000>; |
| ranges = <0x0 0x0c000000 0x200000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| sram-bm@1f0000 { |
| reg = <0x001f0000 0x8000>; |
| }; |
| }; |
| |
| psc: power-sleep-controller@02350000 { |
| pscrst: reset-controller { |
| compatible = "ti,k2e-pscrst", "ti,syscon-reset"; |
| #reset-cells = <1>; |
| |
| ti,reset-bits = < |
| 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ |
| >; |
| }; |
| }; |
| |
| dspgpio0: keystone_dsp_gpio@02620240 { |
| compatible = "ti,keystone-dsp-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio,syscon-dev = <&devctrl 0x240>; |
| }; |
| |
| dsp0: dsp@10800000 { |
| compatible = "ti,k2e-dsp"; |
| reg = <0x10800000 0x00080000>, |
| <0x10e00000 0x00008000>, |
| <0x10f00000 0x00008000>; |
| reg-names = "l2sram", "l1pram", "l1dram"; |
| clocks = <&clkgem0>; |
| ti,syscon-dev = <&devctrl 0x844>; |
| resets = <&pscrst 0>; |
| interrupt-parent = <&kirq0>; |
| interrupts = <0 8>; |
| interrupt-names = "vring", "exception"; |
| kick-gpios = <&dspgpio0 27 0>; |
| status = "disabled"; |
| }; |
| |
| pcie1: pcie@21020000 { |
| compatible = "ti,keystone-pcie","snps,dw-pcie"; |
| clocks = <&clkpcie1>; |
| clock-names = "pcie"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; |
| ranges = <0x82000000 0 0x60000000 0x60000000 |
| 0 0x10000000>; |
| |
| status = "disabled"; |
| device_type = "pci"; |
| num-lanes = <2>; |
| bus-range = <0x00 0xff>; |
| |
| /* error interrupt */ |
| interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */ |
| <0 0 0 2 &pcie_intc1 1>, /* INT B */ |
| <0 0 0 3 &pcie_intc1 2>, /* INT C */ |
| <0 0 0 4 &pcie_intc1 3>; /* INT D */ |
| |
| pcie_msi_intc1: msi-interrupt-controller { |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 379 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 380 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 381 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 382 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 383 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 384 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| pcie_intc1: legacy-interrupt-controller { |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 374 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| |
| mdio: mdio@24200f00 { |
| compatible = "ti,keystone_mdio", "ti,davinci_mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x24200f00 0x100>; |
| status = "disabled"; |
| clocks = <&clkcpgmac>; |
| clock-names = "fck"; |
| bus_freq = <2500000>; |
| }; |
| /include/ "keystone-k2e-netcp.dtsi" |
| }; |
| }; |