| # For a description of the syntax of this configuration file, |
| # see Documentation/kbuild/kconfig-language.txt. |
| # |
| |
| mainmenu "Linux/PowerPC Kernel Configuration" |
| |
| config PPC64 |
| bool "64-bit kernel" |
| default n |
| help |
| This option selects whether a 32-bit or a 64-bit kernel |
| will be built. |
| |
| config PPC32 |
| bool |
| default y if !PPC64 |
| |
| config 64BIT |
| bool |
| default y if PPC64 |
| |
| config PPC_MERGE |
| def_bool y |
| |
| config MMU |
| bool |
| default y |
| |
| config UID16 |
| bool |
| |
| config GENERIC_HARDIRQS |
| bool |
| default y |
| |
| config RWSEM_GENERIC_SPINLOCK |
| bool |
| |
| config RWSEM_XCHGADD_ALGORITHM |
| bool |
| default y |
| |
| config GENERIC_CALIBRATE_DELAY |
| bool |
| default y |
| |
| config PPC |
| bool |
| default y |
| |
| config EARLY_PRINTK |
| bool |
| default y |
| |
| config COMPAT |
| bool |
| default y if PPC64 |
| |
| config SYSVIPC_COMPAT |
| bool |
| depends on COMPAT && SYSVIPC |
| default y |
| |
| # All PPC32s use generic nvram driver through ppc_md |
| config GENERIC_NVRAM |
| bool |
| default y if PPC32 |
| |
| config SCHED_NO_NO_OMIT_FRAME_POINTER |
| bool |
| default y |
| |
| config ARCH_MAY_HAVE_PC_FDC |
| bool |
| default y |
| |
| menu "Processor support" |
| choice |
| prompt "Processor Type" |
| depends on PPC32 |
| default 6xx |
| |
| config 6xx |
| bool "6xx/7xx/74xx" |
| select PPC_FPU |
| help |
| There are four families of PowerPC chips supported. The more common |
| types (601, 603, 604, 740, 750, 7400), the Motorola embedded |
| versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC |
| embedded versions (403 and 405) and the high end 64 bit Power |
| processors (POWER 3, POWER4, and IBM PPC970 also known as G5). |
| |
| Unless you are building a kernel for one of the embedded processor |
| systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx. |
| Note that the kernel runs in 32-bit mode even on 64-bit chips. |
| |
| config PPC_52xx |
| bool "Freescale 52xx" |
| |
| config PPC_82xx |
| bool "Freescale 82xx" |
| |
| config PPC_83xx |
| bool "Freescale 83xx" |
| |
| config 40x |
| bool "AMCC 40x" |
| |
| config 44x |
| bool "AMCC 44x" |
| |
| config 8xx |
| bool "Freescale 8xx" |
| |
| config E200 |
| bool "Freescale e200" |
| |
| config E500 |
| bool "Freescale e500" |
| endchoice |
| |
| config POWER4_ONLY |
| bool "Optimize for POWER4" |
| depends on PPC64 |
| default n |
| ---help--- |
| Cause the compiler to optimize for POWER4/POWER5/PPC970 processors. |
| The resulting binary will not work on POWER3 or RS64 processors |
| when compiled with binutils 2.15 or later. |
| |
| config POWER3 |
| bool |
| depends on PPC64 |
| default y if !POWER4_ONLY |
| |
| config POWER4 |
| depends on PPC64 |
| def_bool y |
| |
| config PPC_FPU |
| bool |
| default y if PPC64 |
| |
| config BOOKE |
| bool |
| depends on E200 || E500 |
| default y |
| |
| config FSL_BOOKE |
| bool |
| depends on E200 || E500 |
| default y |
| |
| config PTE_64BIT |
| bool |
| depends on 44x || E500 |
| default y if 44x |
| default y if E500 && PHYS_64BIT |
| |
| config PHYS_64BIT |
| bool 'Large physical address support' if E500 |
| depends on 44x || E500 |
| default y if 44x |
| ---help--- |
| This option enables kernel support for larger than 32-bit physical |
| addresses. This features is not be available on all e500 cores. |
| |
| If in doubt, say N here. |
| |
| config ALTIVEC |
| bool "AltiVec Support" |
| depends on 6xx || POWER4 |
| ---help--- |
| This option enables kernel support for the Altivec extensions to the |
| PowerPC processor. The kernel currently supports saving and restoring |
| altivec registers, and turning on the 'altivec enable' bit so user |
| processes can execute altivec instructions. |
| |
| This option is only usefully if you have a processor that supports |
| altivec (G4, otherwise known as 74xx series), but does not have |
| any affect on a non-altivec cpu (it does, however add code to the |
| kernel). |
| |
| If in doubt, say Y here. |
| |
| config SPE |
| bool "SPE Support" |
| depends on E200 || E500 |
| ---help--- |
| This option enables kernel support for the Signal Processing |
| Extensions (SPE) to the PowerPC processor. The kernel currently |
| supports saving and restoring SPE registers, and turning on the |
| 'spe enable' bit so user processes can execute SPE instructions. |
| |
| This option is only useful if you have a processor that supports |
| SPE (e500, otherwise known as 85xx series), but does not have any |
| effect on a non-spe cpu (it does, however add code to the kernel). |
| |
| If in doubt, say Y here. |
| |
| config PPC_STD_MMU |
| bool |
| depends on 6xx || POWER3 || POWER4 || PPC64 |
| default y |
| |
| config PPC_STD_MMU_32 |
| def_bool y |
| depends on PPC_STD_MMU && PPC32 |
| |
| config SMP |
| depends on PPC_STD_MMU |
| bool "Symmetric multi-processing support" |
| ---help--- |
| This enables support for systems with more than one CPU. If you have |
| a system with only one CPU, say N. If you have a system with more |
| than one CPU, say Y. Note that the kernel does not currently |
| support SMP machines with 603/603e/603ev or PPC750 ("G3") processors |
| since they have inadequate hardware support for multiprocessor |
| operation. |
| |
| If you say N here, the kernel will run on single and multiprocessor |
| machines, but will use only one CPU of a multiprocessor machine. If |
| you say Y here, the kernel will run on single-processor machines. |
| On a single-processor machine, the kernel will run faster if you say |
| N here. |
| |
| If you don't know what to do here, say N. |
| |
| config NR_CPUS |
| int "Maximum number of CPUs (2-128)" |
| range 2 128 |
| depends on SMP |
| default "32" if PPC64 |
| default "4" |
| |
| config NOT_COHERENT_CACHE |
| bool |
| depends on 4xx || 8xx || E200 |
| default y |
| endmenu |
| |
| source "init/Kconfig" |
| |
| menu "Platform support" |
| depends on PPC64 || 6xx |
| |
| choice |
| prompt "Machine type" |
| default PPC_MULTIPLATFORM |
| |
| config PPC_MULTIPLATFORM |
| bool "Generic desktop/server/laptop" |
| help |
| Select this option if configuring for an IBM pSeries or |
| RS/6000 machine, an Apple machine, or a PReP, CHRP, |
| Maple or Cell-based machine. |
| |
| config PPC_ISERIES |
| bool "IBM Legacy iSeries" |
| depends on PPC64 |
| |
| config EMBEDDED6xx |
| bool "Embedded 6xx/7xx/7xxx-based board" |
| depends on PPC32 && BROKEN |
| |
| config APUS |
| bool "Amiga-APUS" |
| depends on PPC32 && BROKEN |
| help |
| Select APUS if configuring for a PowerUP Amiga. |
| More information is available at: |
| <http://linux-apus.sourceforge.net/>. |
| endchoice |
| |
| config PPC_PSERIES |
| depends on PPC_MULTIPLATFORM && PPC64 |
| bool " IBM pSeries & new (POWER5-based) iSeries" |
| select PPC_I8259 |
| select PPC_RTAS |
| select RTAS_ERROR_LOGGING |
| default y |
| |
| config PPC_CHRP |
| bool " Common Hardware Reference Platform (CHRP) based machines" |
| depends on PPC_MULTIPLATFORM && PPC32 |
| select PPC_I8259 |
| select PPC_INDIRECT_PCI |
| select PPC_RTAS |
| select PPC_MPC106 |
| default y |
| |
| config PPC_PMAC |
| bool " Apple PowerMac based machines" |
| depends on PPC_MULTIPLATFORM |
| select PPC_INDIRECT_PCI if PPC32 |
| select PPC_MPC106 if PPC32 |
| default y |
| |
| config PPC_PMAC64 |
| bool |
| depends on PPC_PMAC && POWER4 |
| select U3_DART |
| select GENERIC_TBSYNC |
| default y |
| |
| config PPC_PREP |
| bool " PowerPC Reference Platform (PReP) based machines" |
| depends on PPC_MULTIPLATFORM && PPC32 && BROKEN |
| select PPC_I8259 |
| select PPC_INDIRECT_PCI |
| default y |
| |
| config PPC_MAPLE |
| depends on PPC_MULTIPLATFORM && PPC64 |
| bool " Maple 970FX Evaluation Board" |
| select U3_DART |
| select MPIC_BROKEN_U3 |
| select GENERIC_TBSYNC |
| default n |
| help |
| This option enables support for the Maple 970FX Evaluation Board. |
| For more informations, refer to <http://www.970eval.com> |
| |
| config PPC_CELL |
| bool " Cell Broadband Processor Architecture" |
| depends on PPC_MULTIPLATFORM && PPC64 |
| select PPC_RTAS |
| select MMIO_NVRAM |
| |
| config PPC_OF |
| bool |
| depends on PPC_MULTIPLATFORM # for now |
| default y |
| |
| config XICS |
| depends on PPC_PSERIES |
| bool |
| default y |
| |
| config U3_DART |
| bool |
| depends on PPC_MULTIPLATFORM && PPC64 |
| default n |
| |
| config MPIC |
| depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP |
| bool |
| default y |
| |
| config PPC_RTAS |
| bool |
| default n |
| |
| config RTAS_ERROR_LOGGING |
| bool |
| depends on PPC_RTAS |
| default n |
| |
| config RTAS_PROC |
| bool "Proc interface to RTAS" |
| depends on PPC_RTAS |
| default y |
| |
| config RTAS_FLASH |
| tristate "Firmware flash interface" |
| depends on PPC64 && RTAS_PROC |
| |
| config MMIO_NVRAM |
| bool |
| default n |
| |
| config MPIC_BROKEN_U3 |
| bool |
| depends on PPC_MAPLE |
| default y |
| |
| config CELL_IIC |
| depends on PPC_CELL |
| bool |
| default y |
| |
| config CRASH_DUMP |
| bool "kernel crash dumps (EXPERIMENTAL)" |
| depends on PPC_MULTIPLATFORM |
| depends on EXPERIMENTAL |
| help |
| Build a kernel suitable for use as a kdump capture kernel. |
| The kernel will be linked at a different address than normal, and |
| so can only be used for Kdump. |
| |
| Don't change this unless you know what you are doing. |
| |
| config IBMVIO |
| depends on PPC_PSERIES || PPC_ISERIES |
| bool |
| default y |
| |
| config IBMEBUS |
| depends on PPC_PSERIES |
| bool "Support for GX bus based adapters" |
| default y |
| help |
| Bus device driver for GX bus based adapters. |
| |
| config PPC_MPC106 |
| bool |
| default n |
| |
| config GENERIC_TBSYNC |
| bool |
| default y if CONFIG_PPC32 && CONFIG_SMP |
| default n |
| |
| source "drivers/cpufreq/Kconfig" |
| |
| config CPU_FREQ_PMAC |
| bool "Support for Apple PowerBooks" |
| depends on CPU_FREQ && ADB_PMU && PPC32 |
| select CPU_FREQ_TABLE |
| help |
| This adds support for frequency switching on Apple PowerBooks, |
| this currently includes some models of iBook & Titanium |
| PowerBook. |
| |
| config CPU_FREQ_PMAC64 |
| bool "Support for some Apple G5s" |
| depends on CPU_FREQ && PMAC_SMU && PPC64 |
| select CPU_FREQ_TABLE |
| help |
| This adds support for frequency switching on Apple iMac G5, |
| and some of the more recent desktop G5 machines as well. |
| |
| config PPC601_SYNC_FIX |
| bool "Workarounds for PPC601 bugs" |
| depends on 6xx && (PPC_PREP || PPC_PMAC) |
| help |
| Some versions of the PPC601 (the first PowerPC chip) have bugs which |
| mean that extra synchronization instructions are required near |
| certain instructions, typically those that make major changes to the |
| CPU state. These extra instructions reduce performance slightly. |
| If you say N here, these extra instructions will not be included, |
| resulting in a kernel which will run faster but may not run at all |
| on some systems with the PPC601 chip. |
| |
| If in doubt, say Y here. |
| |
| config TAU |
| bool "Thermal Management Support" |
| depends on 6xx |
| help |
| G3 and G4 processors have an on-chip temperature sensor called the |
| 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die |
| temperature within 2-4 degrees Celsius. This option shows the current |
| on-die temperature in /proc/cpuinfo if the cpu supports it. |
| |
| Unfortunately, on some chip revisions, this sensor is very inaccurate |
| and in some cases, does not work at all, so don't assume the cpu |
| temp is actually what /proc/cpuinfo says it is. |
| |
| config TAU_INT |
| bool "Interrupt driven TAU driver (DANGEROUS)" |
| depends on TAU |
| ---help--- |
| The TAU supports an interrupt driven mode which causes an interrupt |
| whenever the temperature goes out of range. This is the fastest way |
| to get notified the temp has exceeded a range. With this option off, |
| a timer is used to re-check the temperature periodically. |
| |
| However, on some cpus it appears that the TAU interrupt hardware |
| is buggy and can cause a situation which would lead unexplained hard |
| lockups. |
| |
| Unless you are extending the TAU driver, or enjoy kernel/hardware |
| debugging, leave this option off. |
| |
| config TAU_AVERAGE |
| bool "Average high and low temp" |
| depends on TAU |
| ---help--- |
| The TAU hardware can compare the temperature to an upper and lower |
| bound. The default behavior is to show both the upper and lower |
| bound in /proc/cpuinfo. If the range is large, the temperature is |
| either changing a lot, or the TAU hardware is broken (likely on some |
| G4's). If the range is small (around 4 degrees), the temperature is |
| relatively stable. If you say Y here, a single temperature value, |
| halfway between the upper and lower bounds, will be reported in |
| /proc/cpuinfo. |
| |
| If in doubt, say N here. |
| endmenu |
| |
| source arch/powerpc/platforms/embedded6xx/Kconfig |
| source arch/powerpc/platforms/4xx/Kconfig |
| source arch/powerpc/platforms/85xx/Kconfig |
| source arch/powerpc/platforms/8xx/Kconfig |
| source arch/powerpc/platforms/cell/Kconfig |
| |
| menu "Kernel options" |
| |
| config HIGHMEM |
| bool "High memory support" |
| depends on PPC32 |
| |
| source kernel/Kconfig.hz |
| source kernel/Kconfig.preempt |
| source "fs/Kconfig.binfmt" |
| |
| # We optimistically allocate largepages from the VM, so make the limit |
| # large enough (16MB). This badly named config option is actually |
| # max order + 1 |
| config FORCE_MAX_ZONEORDER |
| int |
| depends on PPC64 |
| default "9" if PPC_64K_PAGES |
| default "13" |
| |
| config MATH_EMULATION |
| bool "Math emulation" |
| depends on 4xx || 8xx || E200 || E500 |
| ---help--- |
| Some PowerPC chips designed for embedded applications do not have |
| a floating-point unit and therefore do not implement the |
| floating-point instructions in the PowerPC instruction set. If you |
| say Y here, the kernel will include code to emulate a floating-point |
| unit, which will allow programs that use floating-point |
| instructions to run. |
| |
| config IOMMU_VMERGE |
| bool "Enable IOMMU virtual merging (EXPERIMENTAL)" |
| depends on EXPERIMENTAL && PPC64 |
| default n |
| help |
| Cause IO segments sent to a device for DMA to be merged virtually |
| by the IOMMU when they happen to have been allocated contiguously. |
| This doesn't add pressure to the IOMMU allocator. However, some |
| drivers don't support getting large merged segments coming back |
| from *_map_sg(). Say Y if you know the drivers you are using are |
| properly handling this case. |
| |
| config HOTPLUG_CPU |
| bool "Support for enabling/disabling CPUs" |
| depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) |
| ---help--- |
| Say Y here to be able to disable and re-enable individual |
| CPUs at runtime on SMP machines. |
| |
| Say N if you are unsure. |
| |
| config KEXEC |
| bool "kexec system call (EXPERIMENTAL)" |
| depends on PPC_MULTIPLATFORM && EXPERIMENTAL |
| help |
| kexec is a system call that implements the ability to shutdown your |
| current kernel, and to start another kernel. It is like a reboot |
| but it is indepedent of the system firmware. And like a reboot |
| you can start any kernel with it, not just Linux. |
| |
| The name comes from the similiarity to the exec system call. |
| |
| It is an ongoing process to be certain the hardware in a machine |
| is properly shutdown, so do not be surprised if this code does not |
| initially work for you. It may help to enable device hotplugging |
| support. As of this writing the exact hardware interface is |
| strongly in flux, so no good recommendation can be made. |
| |
| config EMBEDDEDBOOT |
| bool |
| depends on 8xx || 8260 |
| default y |
| |
| config PC_KEYBOARD |
| bool "PC PS/2 style Keyboard" |
| depends on 4xx || CPM2 |
| |
| config PPCBUG_NVRAM |
| bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC |
| default y if PPC_PREP |
| |
| config IRQ_ALL_CPUS |
| bool "Distribute interrupts on all CPUs by default" |
| depends on SMP && !MV64360 |
| help |
| This option gives the kernel permission to distribute IRQs across |
| multiple CPUs. Saying N here will route all IRQs to the first |
| CPU. Generally saying Y is safe, although some problems have been |
| reported with SMP Power Macintoshes with this option enabled. |
| |
| source "arch/powerpc/platforms/pseries/Kconfig" |
| |
| config NUMA |
| bool "NUMA support" |
| depends on PPC64 |
| default y if SMP && PPC_PSERIES |
| |
| config ARCH_SELECT_MEMORY_MODEL |
| def_bool y |
| depends on PPC64 |
| |
| config ARCH_FLATMEM_ENABLE |
| def_bool y |
| depends on (PPC64 && !NUMA) || PPC32 |
| |
| config ARCH_SPARSEMEM_ENABLE |
| def_bool y |
| depends on PPC64 |
| |
| config ARCH_SPARSEMEM_DEFAULT |
| def_bool y |
| depends on SMP && PPC_PSERIES |
| |
| source "mm/Kconfig" |
| |
| config HAVE_ARCH_EARLY_PFN_TO_NID |
| def_bool y |
| depends on NEED_MULTIPLE_NODES |
| |
| config ARCH_MEMORY_PROBE |
| def_bool y |
| depends on MEMORY_HOTPLUG |
| |
| config PPC_64K_PAGES |
| bool "64k page size" |
| depends on PPC64 |
| help |
| This option changes the kernel logical page size to 64k. On machines |
| without processor support for 64k pages, the kernel will simulate |
| them by loading each individual 4k page on demand transparently, |
| while on hardware with such support, it will be used to map |
| normal application pages. |
| |
| config SCHED_SMT |
| bool "SMT (Hyperthreading) scheduler support" |
| depends on PPC64 && SMP |
| default off |
| help |
| SMT scheduler support improves the CPU scheduler's decision making |
| when dealing with POWER5 cpus at a cost of slightly increased |
| overhead in some places. If unsure say N here. |
| |
| config PROC_DEVICETREE |
| bool "Support for device tree in /proc" |
| depends on PROC_FS |
| help |
| This option adds a device-tree directory under /proc which contains |
| an image of the device tree that the kernel copies from Open |
| Firmware or other boot firmware. If unsure, say Y here. |
| |
| source "arch/powerpc/platforms/prep/Kconfig" |
| |
| config CMDLINE_BOOL |
| bool "Default bootloader kernel arguments" |
| depends on !PPC_ISERIES |
| |
| config CMDLINE |
| string "Initial kernel command string" |
| depends on CMDLINE_BOOL |
| default "console=ttyS0,9600 console=tty0 root=/dev/sda2" |
| help |
| On some platforms, there is currently no way for the boot loader to |
| pass arguments to the kernel. For these platforms, you can supply |
| some command-line options at build time by entering them here. In |
| most cases you will need to specify the root device here. |
| |
| if !44x || BROKEN |
| source kernel/power/Kconfig |
| endif |
| |
| config SECCOMP |
| bool "Enable seccomp to safely compute untrusted bytecode" |
| depends on PROC_FS |
| default y |
| help |
| This kernel feature is useful for number crunching applications |
| that may need to compute untrusted bytecode during their |
| execution. By using pipes or other transports made available to |
| the process as file descriptors supporting the read/write |
| syscalls, it's possible to isolate those applications in |
| their own address space using seccomp. Once seccomp is |
| enabled via /proc/<pid>/seccomp, it cannot be disabled |
| and the task is only allowed to execute a few safe syscalls |
| defined by each seccomp mode. |
| |
| If unsure, say Y. Only embedded should say N here. |
| |
| endmenu |
| |
| config ISA_DMA_API |
| bool |
| default y |
| |
| menu "Bus options" |
| |
| config ISA |
| bool "Support for ISA-bus hardware" |
| depends on PPC_PREP || PPC_CHRP |
| select PPC_I8259 |
| help |
| Find out whether you have ISA slots on your motherboard. ISA is the |
| name of a bus system, i.e. the way the CPU talks to the other stuff |
| inside your box. If you have an Apple machine, say N here; if you |
| have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If |
| you have an embedded board, consult your board documentation. |
| |
| config GENERIC_ISA_DMA |
| bool |
| depends on PPC64 || POWER4 || 6xx && !CPM2 |
| default y |
| |
| config PPC_I8259 |
| bool |
| default y if 85xx |
| default n |
| |
| config PPC_INDIRECT_PCI |
| bool |
| depends on PCI |
| default y if 40x || 44x || 85xx || 83xx |
| default n |
| |
| config EISA |
| bool |
| |
| config SBUS |
| bool |
| |
| # Yes MCA RS/6000s exist but Linux-PPC does not currently support any |
| config MCA |
| bool |
| |
| config PCI |
| bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) |
| default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx |
| default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS |
| default PCI_QSPAN if !4xx && !CPM2 && 8xx |
| help |
| Find out whether your system includes a PCI bus. PCI is the name of |
| a bus system, i.e. the way the CPU talks to the other stuff inside |
| your box. If you say Y here, the kernel will include drivers and |
| infrastructure code to support PCI bus devices. |
| |
| config PCI_DOMAINS |
| bool |
| default PCI |
| |
| config MPC83xx_PCI2 |
| bool " Supprt for 2nd PCI host controller" |
| depends on PCI && MPC834x |
| default y if MPC834x_SYS |
| |
| config PCI_QSPAN |
| bool "QSpan PCI" |
| depends on !4xx && !CPM2 && 8xx |
| select PPC_I8259 |
| help |
| Say Y here if you have a system based on a Motorola 8xx-series |
| embedded processor with a QSPAN PCI interface, otherwise say N. |
| |
| config PCI_8260 |
| bool |
| depends on PCI && 8260 |
| select PPC_INDIRECT_PCI |
| default y |
| |
| config 8260_PCI9 |
| bool " Enable workaround for MPC826x erratum PCI 9" |
| depends on PCI_8260 && !ADS8272 |
| default y |
| |
| choice |
| prompt " IDMA channel for PCI 9 workaround" |
| depends on 8260_PCI9 |
| |
| config 8260_PCI9_IDMA1 |
| bool "IDMA1" |
| |
| config 8260_PCI9_IDMA2 |
| bool "IDMA2" |
| |
| config 8260_PCI9_IDMA3 |
| bool "IDMA3" |
| |
| config 8260_PCI9_IDMA4 |
| bool "IDMA4" |
| |
| endchoice |
| |
| source "drivers/pci/Kconfig" |
| |
| source "drivers/pcmcia/Kconfig" |
| |
| source "drivers/pci/hotplug/Kconfig" |
| |
| endmenu |
| |
| menu "Advanced setup" |
| depends on PPC32 |
| |
| config ADVANCED_OPTIONS |
| bool "Prompt for advanced kernel configuration options" |
| help |
| This option will enable prompting for a variety of advanced kernel |
| configuration options. These options can cause the kernel to not |
| work if they are set incorrectly, but can be used to optimize certain |
| aspects of kernel memory management. |
| |
| Unless you know what you are doing, say N here. |
| |
| comment "Default settings for advanced configuration options are used" |
| depends on !ADVANCED_OPTIONS |
| |
| config HIGHMEM_START_BOOL |
| bool "Set high memory pool address" |
| depends on ADVANCED_OPTIONS && HIGHMEM |
| help |
| This option allows you to set the base address of the kernel virtual |
| area used to map high memory pages. This can be useful in |
| optimizing the layout of kernel virtual memory. |
| |
| Say N here unless you know what you are doing. |
| |
| config HIGHMEM_START |
| hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL |
| default "0xfe000000" |
| |
| config LOWMEM_SIZE_BOOL |
| bool "Set maximum low memory" |
| depends on ADVANCED_OPTIONS |
| help |
| This option allows you to set the maximum amount of memory which |
| will be used as "low memory", that is, memory which the kernel can |
| access directly, without having to set up a kernel virtual mapping. |
| This can be useful in optimizing the layout of kernel virtual |
| memory. |
| |
| Say N here unless you know what you are doing. |
| |
| config LOWMEM_SIZE |
| hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL |
| default "0x30000000" |
| |
| config KERNEL_START_BOOL |
| bool "Set custom kernel base address" |
| depends on ADVANCED_OPTIONS |
| help |
| This option allows you to set the kernel virtual address at which |
| the kernel will map low memory (the kernel image will be linked at |
| this address). This can be useful in optimizing the virtual memory |
| layout of the system. |
| |
| Say N here unless you know what you are doing. |
| |
| config KERNEL_START |
| hex "Virtual address of kernel base" if KERNEL_START_BOOL |
| default "0xc0000000" |
| |
| config TASK_SIZE_BOOL |
| bool "Set custom user task size" |
| depends on ADVANCED_OPTIONS |
| help |
| This option allows you to set the amount of virtual address space |
| allocated to user tasks. This can be useful in optimizing the |
| virtual memory layout of the system. |
| |
| Say N here unless you know what you are doing. |
| |
| config TASK_SIZE |
| hex "Size of user task space" if TASK_SIZE_BOOL |
| default "0x80000000" |
| |
| config CONSISTENT_START_BOOL |
| bool "Set custom consistent memory pool address" |
| depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE |
| help |
| This option allows you to set the base virtual address |
| of the the consistent memory pool. This pool of virtual |
| memory is used to make consistent memory allocations. |
| |
| config CONSISTENT_START |
| hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL |
| default "0xff100000" if NOT_COHERENT_CACHE |
| |
| config CONSISTENT_SIZE_BOOL |
| bool "Set custom consistent memory pool size" |
| depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE |
| help |
| This option allows you to set the size of the the |
| consistent memory pool. This pool of virtual memory |
| is used to make consistent memory allocations. |
| |
| config CONSISTENT_SIZE |
| hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL |
| default "0x00200000" if NOT_COHERENT_CACHE |
| |
| config BOOT_LOAD_BOOL |
| bool "Set the boot link/load address" |
| depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM |
| help |
| This option allows you to set the initial load address of the zImage |
| or zImage.initrd file. This can be useful if you are on a board |
| which has a small amount of memory. |
| |
| Say N here unless you know what you are doing. |
| |
| config BOOT_LOAD |
| hex "Link/load address for booting" if BOOT_LOAD_BOOL |
| default "0x00400000" if 40x || 8xx || 8260 |
| default "0x01000000" if 44x |
| default "0x00800000" |
| |
| config PIN_TLB |
| bool "Pinned Kernel TLBs (860 ONLY)" |
| depends on ADVANCED_OPTIONS && 8xx |
| endmenu |
| |
| if PPC64 |
| config KERNEL_START |
| hex |
| default "0xc000000000000000" |
| endif |
| |
| source "net/Kconfig" |
| |
| source "drivers/Kconfig" |
| |
| source "fs/Kconfig" |
| |
| # XXX source "arch/ppc/8xx_io/Kconfig" |
| |
| # XXX source "arch/ppc/8260_io/Kconfig" |
| |
| source "arch/powerpc/platforms/iseries/Kconfig" |
| |
| source "lib/Kconfig" |
| |
| menu "Instrumentation Support" |
| depends on EXPERIMENTAL |
| |
| source "arch/powerpc/oprofile/Kconfig" |
| |
| config KPROBES |
| bool "Kprobes (EXPERIMENTAL)" |
| depends on PPC64 |
| help |
| Kprobes allows you to trap at almost any kernel address and |
| execute a callback function. register_kprobe() establishes |
| a probepoint and specifies the callback. Kprobes is useful |
| for kernel debugging, non-intrusive instrumentation and testing. |
| If in doubt, say "N". |
| endmenu |
| |
| source "arch/powerpc/Kconfig.debug" |
| |
| source "security/Kconfig" |
| |
| config KEYS_COMPAT |
| bool |
| depends on COMPAT && KEYS |
| default y |
| |
| source "crypto/Kconfig" |