| Marvell DSA Switch Device Tree Bindings |
| --------------------------------------- |
| |
| WARNING: This binding is currently unstable. Do not program it into a |
| FLASH never to be changed again. Once this binding is stable, this |
| warning will be removed. |
| |
| If you need a stable binding, use the old dsa.txt binding. |
| |
| Marvell Switches are MDIO devices. The following properties should be |
| placed as a child node of an mdio device. |
| |
| The properties described here are those specific to Marvell devices. |
| Additional required and optional properties can be found in dsa.txt. |
| |
| Required properties: |
| - compatible : Should be one of "marvell,mv88e6085", |
| - reg : Address on the MII bus for the switch. |
| |
| Optional properties: |
| |
| - reset-gpios : Should be a gpio specifier for a reset line |
| |
| Example: |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| switch0: switch@0 { |
| compatible = "marvell,mv88e6085"; |
| reg = <0>; |
| reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; |
| }; |
| }; |