| /************************************************************************/ |
| /* */ |
| /* Title : RIO Shared Memory Window Inteface */ |
| /* */ |
| /* Author : N.P.Vassallo */ |
| /* */ |
| /* Creation : 7th June 1999 */ |
| /* */ |
| /* Version : 1.0.0 */ |
| /* */ |
| /* Copyright : (c) Specialix International Ltd. 1999 * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * */ |
| /* Description : Prototypes, structures and definitions */ |
| /* describing RIO host card shared memory */ |
| /* window interface structures: */ |
| /* PARMMAP */ |
| /* RUP */ |
| /* PHB */ |
| /* LPB */ |
| /* PKT */ |
| /* */ |
| /************************************************************************/ |
| |
| /* History... |
| |
| 1.0.0 07/06/99 NPV Creation. (based on PARMMAP.H) |
| |
| */ |
| |
| #ifndef _riowinif_h /* If RIOWINDIF.H not already defined */ |
| #define _riowinif_h 1 |
| |
| /***************************************************************************** |
| ******************************** ********************************* |
| ******************************** General ********************************* |
| ******************************** ********************************* |
| *****************************************************************************/ |
| |
| #define TPNULL ((_u16)(0x8000)) |
| |
| /***************************************************************************** |
| ******************************** ******************************** |
| ******************************** PARM_MAP ******************************** |
| ******************************** ******************************** |
| *****************************************************************************/ |
| |
| /* The PARM_MAP structure defines global values relating to the Host Card / RTA |
| and is the main structure from which all other structures are referenced. */ |
| |
| typedef struct _PARM_MAP { |
| _u16 phb_ptr; /* 0x00 Pointer to the PHB array */ |
| _u16 phb_num_ptr; /* 0x02 Ptr to Number of PHB's */ |
| _u16 free_list; /* 0x04 Free List pointer */ |
| _u16 free_list_end; /* 0x06 Free List End pointer */ |
| _u16 q_free_list_ptr; /* 0x08 Ptr to Q_BUF variable */ |
| _u16 unit_id_ptr; /* 0x0A Unit Id */ |
| _u16 link_str_ptr; /* 0x0C Link Structure Array */ |
| _u16 bootloader_1; /* 0x0E 1st Stage Boot Loader */ |
| _u16 bootloader_2; /* 0x10 2nd Stage Boot Loader */ |
| _u16 port_route_map_ptr; /* 0x12 Port Route Map */ |
| _u16 route_ptr; /* 0x14 Route Map */ |
| _u16 map_present; /* 0x16 Route Map present */ |
| _u16 pkt_num; /* 0x18 Total number of packets */ |
| _u16 q_num; /* 0x1A Total number of Q packets */ |
| _u16 buffers_per_port; /* 0x1C Number of buffers per port */ |
| _u16 heap_size; /* 0x1E Initial size of heap */ |
| _u16 heap_left; /* 0x20 Current Heap left */ |
| _u16 error; /* 0x22 Error code */ |
| _u16 tx_max; /* 0x24 Max number of tx pkts per phb */ |
| _u16 rx_max; /* 0x26 Max number of rx pkts per phb */ |
| _u16 rx_limit; /* 0x28 For high / low watermarks */ |
| _u16 links; /* 0x2A Links to use */ |
| _u16 timer; /* 0x2C Interrupts per second */ |
| _u16 rups; /* 0x2E Pointer to the RUPs */ |
| _u16 max_phb; /* 0x30 Mostly for debugging */ |
| _u16 living; /* 0x32 Just increments!! */ |
| _u16 init_done; /* 0x34 Initialisation over */ |
| _u16 booting_link; /* 0x36 */ |
| _u16 idle_count; /* 0x38 Idle time counter */ |
| _u16 busy_count; /* 0x3A Busy counter */ |
| _u16 idle_control; /* 0x3C Control Idle Process */ |
| _u16 tx_intr; /* 0x3E TX interrupt pending */ |
| _u16 rx_intr; /* 0x40 RX interrupt pending */ |
| _u16 rup_intr; /* 0x42 RUP interrupt pending */ |
| |
| } PARM_MAP; |
| |
| /* Same thing again, but defined as offsets... */ |
| |
| #define PM_phb_ptr 0x00 /* 0x00 Pointer to the PHB array */ |
| #define PM_phb_num_ptr 0x02 /* 0x02 Ptr to Number of PHB's */ |
| #define PM_free_list 0x04 /* 0x04 Free List pointer */ |
| #define PM_free_list_end 0x06 /* 0x06 Free List End pointer */ |
| #define PM_q_free_list_ptr 0x08 /* 0x08 Ptr to Q_BUF variable */ |
| #define PM_unit_id_ptr 0x0A /* 0x0A Unit Id */ |
| #define PM_link_str_ptr 0x0C /* 0x0C Link Structure Array */ |
| #define PM_bootloader_1 0x0E /* 0x0E 1st Stage Boot Loader */ |
| #define PM_bootloader_2 0x10 /* 0x10 2nd Stage Boot Loader */ |
| #define PM_port_route_map_ptr 0x12 /* 0x12 Port Route Map */ |
| #define PM_route_ptr 0x14 /* 0x14 Route Map */ |
| #define PM_map_present 0x16 /* 0x16 Route Map present */ |
| #define PM_pkt_num 0x18 /* 0x18 Total number of packets */ |
| #define PM_q_num 0x1A /* 0x1A Total number of Q packets */ |
| #define PM_buffers_per_port 0x1C /* 0x1C Number of buffers per port */ |
| #define PM_heap_size 0x1E /* 0x1E Initial size of heap */ |
| #define PM_heap_left 0x20 /* 0x20 Current Heap left */ |
| #define PM_error 0x22 /* 0x22 Error code */ |
| #define PM_tx_max 0x24 /* 0x24 Max number of tx pkts per phb */ |
| #define PM_rx_max 0x26 /* 0x26 Max number of rx pkts per phb */ |
| #define PM_rx_limit 0x28 /* 0x28 For high / low watermarks */ |
| #define PM_links 0x2A /* 0x2A Links to use */ |
| #define PM_timer 0x2C /* 0x2C Interrupts per second */ |
| #define PM_rups 0x2E /* 0x2E Pointer to the RUPs */ |
| #define PM_max_phb 0x30 /* 0x30 Mostly for debugging */ |
| #define PM_living 0x32 /* 0x32 Just increments!! */ |
| #define PM_init_done 0x34 /* 0x34 Initialisation over */ |
| #define PM_booting_link 0x36 /* 0x36 */ |
| #define PM_idle_count 0x38 /* 0x38 Idle time counter */ |
| #define PM_busy_count 0x3A /* 0x3A Busy counter */ |
| #define PM_idle_control 0x3C /* 0x3C Control Idle Process */ |
| #define PM_tx_intr 0x3E /* 0x4E TX interrupt pending */ |
| #define PM_rx_intr 0x40 /* 0x40 RX interrupt pending */ |
| #define PM_rup_intr 0x42 /* 0x42 RUP interrupt pending */ |
| #define sizeof_PARM_MAP 0x44 /* structure size = 0x44 */ |
| |
| /* PARM_MAP.error definitions... */ |
| #define E_NO_ERROR 0x00 |
| #define E_PROCESS_NOT_INIT 0x01 |
| #define E_LINK_TIMEOUT 0x02 |
| #define E_NO_ROUTE 0x03 |
| #define E_CONFUSED 0x04 |
| #define E_HOME 0x05 |
| #define E_CSUM_FAIL 0x06 |
| #define E_DISCONNECTED 0x07 |
| #define E_BAD_RUP 0x08 |
| #define E_NO_VIRGIN 0x09 |
| #define E_BOOT_RUP_BUSY 0x10 |
| #define E_CHANALLOC 0x80 |
| #define E_POLL_ALLOC 0x81 |
| #define E_LTTWAKE 0x82 |
| #define E_LTT_ALLOC 0x83 |
| #define E_LRT_ALLOC 0x84 |
| #define E_CIRRUS 0x85 |
| #define E_MONITOR 0x86 |
| #define E_PHB_ALLOC 0x87 |
| #define E_ARRAY_ALLOC 0x88 |
| #define E_QBUF_ALLOC 0x89 |
| #define E_PKT_ALLOC 0x8a |
| #define E_GET_TX_Q_BUF 0x8b |
| #define E_GET_RX_Q_BUF 0x8c |
| #define E_MEM_OUT 0x8d |
| #define E_MMU_INIT 0x8e |
| #define E_LTT_INIT 0x8f |
| #define E_LRT_INIT 0x90 |
| #define E_LINK_RUN 0x91 |
| #define E_MONITOR_ALLOC 0x92 |
| #define E_MONITOR_INIT 0x93 |
| #define E_POLL_INIT 0x94 |
| |
| /* PARM_MAP.links definitions... */ |
| #define RIO_LINK_ENABLE 0x80FF |
| |
| /***************************************************************************** |
| ********************************** *********************************** |
| ********************************** RUP *********************************** |
| ********************************** *********************************** |
| *****************************************************************************/ |
| |
| /* The RUP (Remote Unit Port) structure relates to the Remote Terminal Adapters |
| attached to the system and there is normally an array of MAX_RUPS (=16) structures |
| in a host card, defined by PARM_MAP->rup. */ |
| |
| typedef struct _RUP { |
| _u16 txpkt; /* 0x00 Outgoing packet */ |
| _u16 rxpkt; /* 0x02 ncoming packet */ |
| _u16 link; /* 0x04 Which link to send packet down ? */ |
| _u8 rup_dest_unit[2]; /* 0x06 Destination Unit */ |
| _u16 handshake; /* 0x08 Handshaking */ |
| _u16 timeout; /* 0x0A Timeout */ |
| _u16 status; /* 0x0C Status */ |
| _u16 txcontrol; /* 0x0E Transmit control */ |
| _u16 rxcontrol; /* 0x10 Receive control */ |
| |
| } RUP; |
| |
| /* Same thing again, but defined as offsets... */ |
| |
| #define RUP_txpkt 0x00 /* 0x00 Outgoing packet */ |
| #define RUP_rxpkt 0x02 /* 0x02 Incoming packet */ |
| #define RUP_link 0x04 /* 0x04 Which link to send packet down ? */ |
| #define RUP_rup_dest_unit 0x06 /* 0x06 Destination Unit */ |
| #define RUP_handshake 0x08 /* 0x08 Handshaking */ |
| #define RUP_timeout 0x0A /* 0x0A Timeout */ |
| #define RUP_status 0x0C /* 0x0C Status */ |
| #define RUP_txcontrol 0x0E /* 0x0E Transmit control */ |
| #define RUP_rxcontrol 0x10 /* 0x10 Receive control */ |
| #define sizeof_RUP 0x12 /* structure size = 0x12 */ |
| |
| #define MAX_RUP 16 |
| |
| /* RUP.txcontrol definitions... */ |
| #define TX_RUP_INACTIVE 0 /* Nothing to transmit */ |
| #define TX_PACKET_READY 1 /* Transmit packet ready */ |
| #define TX_LOCK_RUP 2 /* Transmit side locked */ |
| |
| /* RUP.txcontrol definitions... */ |
| #define RX_RUP_INACTIVE 0 /* Nothing received */ |
| #define RX_PACKET_READY 1 /* Packet received */ |
| |
| #define RUP_NO_OWNER 0xFF /* RUP not owned by any process */ |
| |
| /***************************************************************************** |
| ********************************** *********************************** |
| ********************************** PHB *********************************** |
| ********************************** *********************************** |
| *****************************************************************************/ |
| |
| /* The PHB (Port Header Block) structure relates to the serial ports attached |
| to the system and there is normally an array of MAX_PHBS (=128) structures |
| in a host card, defined by PARM_MAP->phb_ptr and PARM_MAP->phb_num_ptr. */ |
| |
| typedef struct _PHB { |
| _u16 source; /* 0x00 Location of the PHB in the host card */ |
| _u16 handshake; /* 0x02 Used to manage receive packet flow control */ |
| _u16 status; /* 0x04 Internal port transmit/receive status */ |
| _u16 timeout; /* 0x06 Time period to wait for an ACK */ |
| _u16 link; /* 0x08 The host link associated with the PHB */ |
| _u16 destination; /* 0x0A Location of the remote port on the network */ |
| |
| _u16 tx_start; /* 0x0C first entry in the packet array for transmit packets */ |
| _u16 tx_end; /* 0x0E last entry in the packet array for transmit packets */ |
| _u16 tx_add; /* 0x10 position in the packet array for new transmit packets */ |
| _u16 tx_remove; /* 0x12 current position in the packet pointer array */ |
| |
| _u16 rx_start; /* 0x14 first entry in the packet array for receive packets */ |
| _u16 rx_end; /* 0x16 last entry in the packet array for receive packets */ |
| _u16 rx_add; /* 0x18 position in the packet array for new receive packets */ |
| _u16 rx_remove; /* 0x1A current position in the packet pointer array */ |
| |
| } PHB; |
| |
| /* Same thing again, but defined as offsets... */ |
| |
| #define PHB_source 0x00 /* 0x00 Location of the PHB in the host card */ |
| #define PHB_handshake 0x02 /* 0x02 Used to manage receive packet flow control */ |
| #define PHB_status 0x04 /* 0x04 Internal port transmit/receive status */ |
| #define PHB_timeout 0x06 /* 0x06 Time period to wait for an ACK */ |
| #define PHB_link 0x08 /* 0x08 The host link associated with the PHB */ |
| #define PHB_destination 0x0A /* 0x0A Location of the remote port on the network */ |
| #define PHB_tx_start 0x0C /* 0x0C first entry in the packet array for transmit packets */ |
| #define PHB_tx_end 0x0E /* 0x0E last entry in the packet array for transmit packets */ |
| #define PHB_tx_add 0x10 /* 0x10 position in the packet array for new transmit packets */ |
| #define PHB_tx_remove 0x12 /* 0x12 current position in the packet pointer array */ |
| #define PHB_rx_start 0x14 /* 0x14 first entry in the packet array for receive packets */ |
| #define PHB_rx_end 0x16 /* 0x16 last entry in the packet array for receive packets */ |
| #define PHB_rx_add 0x18 /* 0x18 position in the packet array for new receive packets */ |
| #define PHB_rx_remove 0x1A /* 0x1A current position in the packet pointer array */ |
| #define sizeof_PHB 0x1C /* structure size = 0x1C */ |
| |
| /* PHB.handshake definitions... */ |
| #define PHB_HANDSHAKE_SET 0x0001 /* Set by LRT */ |
| #define PHB_HANDSHAKE_RESET 0x0002 /* Set by ISR / driver */ |
| #define PHB_HANDSHAKE_FLAGS (PHB_HANDSHAKE_RESET|PHB_HANDSHAKE_SET) |
| /* Reset by ltt */ |
| |
| #define MAX_PHB 128 /* range 0-127 */ |
| |
| /***************************************************************************** |
| ********************************** *********************************** |
| ********************************** LPB *********************************** |
| ********************************** *********************************** |
| *****************************************************************************/ |
| |
| /* The LPB (Link Parameter Block) structure relates to a RIO Network Link |
| and there is normally an array of MAX_LINKS (=4) structures in a host card, |
| defined by PARM_MAP->link_str_ptr. */ |
| |
| typedef struct _LPB { |
| _u16 link_number; /* 0x00 Link Number */ |
| _u16 in_ch; /* 0x02 Link In Channel */ |
| _u16 out_ch; /* 0x04 Link Out Channel */ |
| _u8 attached_serial[4]; /* 0x06 Attached serial number */ |
| _u8 attached_host_serial[4]; /* 0x0A Serial number of Host who booted other end */ |
| _u16 descheduled; /* 0x0E Currently Descheduled */ |
| _u16 state; /* 0x10 Current state */ |
| _u16 send_poll; /* 0x12 Send a Poll Packet */ |
| _u16 ltt_p; /* 0x14 Process Descriptor */ |
| _u16 lrt_p; /* 0x16 Process Descriptor */ |
| _u16 lrt_status; /* 0x18 Current lrt status */ |
| _u16 ltt_status; /* 0x1A Current ltt status */ |
| _u16 timeout; /* 0x1C Timeout value */ |
| _u16 topology; /* 0x1E Topology bits */ |
| _u16 mon_ltt; /* 0x20 */ |
| _u16 mon_lrt; /* 0x22 */ |
| _u16 num_pkts; /* 0x24 */ |
| _u16 add_packet_list; /* 0x26 Add packets to here */ |
| _u16 remove_packet_list; /* 0x28 Send packets from here */ |
| |
| _u16 lrt_fail_chan; /* 0x2A Lrt's failure channel */ |
| _u16 ltt_fail_chan; /* 0x2C Ltt's failure channel */ |
| |
| RUP rup; /* 0x2E RUP structure for HOST to driver comms */ |
| RUP link_rup; /* 0x40 RUP for the link (POLL, topology etc.) */ |
| _u16 attached_link; /* 0x52 Number of attached link */ |
| _u16 csum_errors; /* 0x54 csum errors */ |
| _u16 num_disconnects; /* 0x56 number of disconnects */ |
| _u16 num_sync_rcvd; /* 0x58 # sync's received */ |
| _u16 num_sync_rqst; /* 0x5A # sync requests */ |
| _u16 num_tx; /* 0x5C Num pkts sent */ |
| _u16 num_rx; /* 0x5E Num pkts received */ |
| _u16 module_attached; /* 0x60 Module tpyes of attached */ |
| _u16 led_timeout; /* 0x62 LED timeout */ |
| _u16 first_port; /* 0x64 First port to service */ |
| _u16 last_port; /* 0x66 Last port to service */ |
| |
| } LPB; |
| |
| /* Same thing again, but defined as offsets... */ |
| |
| #define LPB_link_number 0x00 /* 0x00 Link Number */ |
| #define LPB_in_ch 0x02 /* 0x02 Link In Channel */ |
| #define LPB_out_ch 0x04 /* 0x04 Link Out Channel */ |
| #define LPB_attached_serial 0x06 /* 0x06 Attached serial number */ |
| #define LPB_attached_host_serial 0x0A /* 0x0A Serial number of Host who booted other end */ |
| #define LPB_descheduled 0x0E /* 0x0E Currently Descheduled */ |
| #define LPB_state 0x10 /* 0x10 Current state */ |
| #define LPB_send_poll 0x12 /* 0x12 Send a Poll Packet */ |
| #define LPB_ltt_p 0x14 /* 0x14 Process Descriptor */ |
| #define LPB_lrt_p 0x16 /* 0x16 Process Descriptor */ |
| #define LPB_lrt_status 0x18 /* 0x18 Current lrt status */ |
| #define LPB_ltt_status 0x1A /* 0x1A Current ltt status */ |
| #define LPB_timeout 0x1C /* 0x1C Timeout value */ |
| #define LPB_topology 0x1E /* 0x1E Topology bits */ |
| #define LPB_mon_ltt 0x20 /* 0x20 */ |
| #define LPB_mon_lrt 0x22 /* 0x22 */ |
| #define LPB_num_pkts 0x24 /* 0x24 */ |
| #define LPB_add_packet_list 0x26 /* 0x26 Add packets to here */ |
| #define LPB_remove_packet_list 0x28 /* 0x28 Send packets from here */ |
| #define LPB_lrt_fail_chan 0x2A /* 0x2A Lrt's failure channel */ |
| #define LPB_ltt_fail_chan 0x2C /* 0x2C Ltt's failure channel */ |
| #define LPB_rup 0x2E /* 0x2E RUP structure for HOST to driver comms */ |
| #define LPB_link_rup 0x40 /* 0x40 RUP for the link (POLL, topology etc.) */ |
| #define LPB_attached_link 0x52 /* 0x52 Number of attached link */ |
| #define LPB_csum_errors 0x54 /* 0x54 csum errors */ |
| #define LPB_num_disconnects 0x56 /* 0x56 number of disconnects */ |
| #define LPB_num_sync_rcvd 0x58 /* 0x58 # sync's received */ |
| #define LPB_num_sync_rqst 0x5A /* 0x5A # sync requests */ |
| #define LPB_num_tx 0x5C /* 0x5C Num pkts sent */ |
| #define LPB_num_rx 0x5E /* 0x5E Num pkts received */ |
| #define LPB_module_attached 0x60 /* 0x60 Module tpyes of attached */ |
| #define LPB_led_timeout 0x62 /* 0x62 LED timeout */ |
| #define LPB_first_port 0x64 /* 0x64 First port to service */ |
| #define LPB_last_port 0x66 /* 0x66 Last port to service */ |
| #define sizeof_LPB 0x68 /* structure size = 0x68 */ |
| |
| #define LINKS_PER_UNIT 4 /* number of links from a host */ |
| |
| /***************************************************************************** |
| ******************************** ******************************* |
| ******************************** FREE_LIST ******************************* |
| ******************************** ******************************* |
| *****************************************************************************/ |
| |
| /* Used to overlay packet headers when allocating/freeing packets from the free list */ |
| |
| typedef struct _FREE_LIST { |
| _u16 next; /* 0x00 offset of next list item */ |
| _u16 prev; /* 0x02 offset of previous list item */ |
| |
| } FREE_LIST; |
| |
| /* Same thing again, but defined as offsets... */ |
| |
| #define FL_next 0x00 /* 0x00 offset of next list item */ |
| #define FL_prev 0x02 /* 0x02 offset of previous list item */ |
| |
| /***************************************************************************** |
| ********************************** *********************************** |
| ********************************** PKT *********************************** |
| ********************************** *********************************** |
| *****************************************************************************/ |
| |
| /* The PKT is the main unit of communication between Host Cards and RTAs across |
| the RIO network. */ |
| |
| #define PKT_MAX_DATA_LEN 72 /* Size of packet data */ |
| |
| typedef struct _PKT { |
| _u8 dest_unit; /* 0x00 Destination Unit Id */ |
| _u8 dest_port; /* 0x01 Destination Port */ |
| _u8 src_unit; /* 0x02 Source Unit Id */ |
| _u8 src_port; /* 0x03 Source Port */ |
| _u8 len; /* 0x04 Length (in bytes) of data field */ |
| _u8 control; /* 0x05 */ |
| _u8 data[PKT_MAX_DATA_LEN]; /* 0x06 Actual data */ |
| _u16 csum; /* 0x4E C-SUM */ |
| |
| } PKT; |
| |
| /* Same thing again, but defined as offsets... */ |
| |
| #define PKT_dest_unit 0x00 /* 0x00 Destination Unit Id */ |
| #define PKT_dest_port 0x01 /* 0x01 Destination Port */ |
| #define PKT_src_unit 0x02 /* 0x02 Source Unit Id */ |
| #define PKT_src_port 0x03 /* 0x03 Source Port */ |
| #define PKT_len 0x04 /* 0x04 Length (in bytes) of data field */ |
| #define PKT_control 0x05 /* 0x05 */ |
| #define PKT_data 0x06 /* 0x06 Actual data */ |
| #define PKT_csum 0x4E /* 0x4E C-SUM */ |
| #define sizeof_PKT 0x50 /* structure size = 0x50 */ |
| |
| /* PKT.len definitions... */ |
| #define PKT_CMD_BIT 0x80 |
| #define PKT_CMD_DATA 0x80 |
| #define PKT_LEN_MASK 0x7F |
| |
| /* PKT.control definitions... */ |
| #define PKT_ACK 0x40 |
| #define PKT_TGL 0x20 |
| #define DATA_WNDW 0x10 |
| #define PKT_TTL_MASK 0x0F |
| #define MAX_TTL 0x0F |
| |
| /***************************************************************************** |
| ***************************** **************************** |
| ***************************** Control Packets **************************** |
| ***************************** **************************** |
| *****************************************************************************/ |
| |
| /* The following definitions and structures define the control packets sent |
| between the driver and RIO Ports, RTAs and Host Cards. */ |
| |
| #define PRE_EMPTIVE 0x80 /* Pre-emptive command (sent via port's RUP) */ |
| |
| /* "in-band" and "pre-emptive" port commands... */ |
| #define OPEN 0x00 /* Driver->RIO Open a port */ |
| #define CONFIG 0x01 /* Driver->RIO Configure a port */ |
| #define MOPEN 0x02 /* Driver->RIO Modem open (wait for DCD) */ |
| #define CLOSE 0x03 /* Driver->RIO Close a port */ |
| #define WFLUSH (0x04|PRE_EMPTIVE) /* Driver->RIO Write flush */ |
| #define RFLUSH (0x05|PRE_EMPTIVE) /* Driver->RIO Read flush */ |
| #define RESUME (0x06|PRE_EMPTIVE) /* Driver->RIO Behave as if XON received */ |
| #define SBREAK 0x07 /* Driver->RIO Start break */ |
| #define EBREAK 0x08 /* Driver->RIO End break */ |
| #define SUSPEND (0x09|PRE_EMPTIVE) /* Driver->RIO Behave as if XOFF received */ |
| #define FCLOSE (0x0A|PRE_EMPTIVE) /* Driver->RIO Force close */ |
| #define XPRINT 0x0B /* Driver->RIO Xprint packet */ |
| #define MBIS (0x0C|PRE_EMPTIVE) /* Driver->RIO Set modem lines */ |
| #define MBIC (0x0D|PRE_EMPTIVE) /* Driver->RIO Clear modem lines */ |
| #define MSET (0x0E|PRE_EMPTIVE) /* Driver->RIO Set modem lines */ |
| #define PCLOSE 0x0F /* Driver->RIO Pseudo close */ |
| #define MGET (0x10|PRE_EMPTIVE) /* Driver->RIO Force update of modem status */ |
| #define MEMDUMP (0x11|PRE_EMPTIVE) /* Driver->RIO DEBUG request for RTA memory */ |
| #define READ_REGISTER (0x12|PRE_EMPTIVE) /* Driver->RIO DEBUG read CD1400 register */ |
| |
| /* Remote Unit Port (RUP) packet definitions... (specified in PKT.dest_unit and PKT.src_unit) */ |
| #define SYNC_RUP 0xFF /* Download internal */ |
| #define COMMAND_RUP 0xFE /* Command ack/status */ |
| #define ERROR_RUP 0xFD /* Download internal */ |
| #define POLL_RUP 0xFC /* Download internal */ |
| #define BOOT_RUP 0xFB /* Used to boot RTAs */ |
| #define ROUTE_RUP 0xFA /* Used to specify routing/topology */ |
| #define STATUS_RUP 0xF9 /* Not used */ |
| #define POWER_RUP 0xF8 /* Download internal */ |
| |
| /* COMMAND_RUP definitions... */ |
| #define COMPLETE (0x20|PRE_EMPTIVE) /* RIO->Driver Command complete */ |
| #define BREAK_RECEIVED (0x21|PRE_EMPTIVE) /* RIO->Driver Break received */ |
| #define MODEM_STATUS (0x22|PRE_EMPTIVE) /* RIO->Driver Modem status change */ |
| |
| /* BOOT_RUP definitions... */ |
| #define BOOT_REQUEST 0x00 /* RIO->Driver Request for boot */ |
| #define BOOT_ABORT 0x01 /* Driver->RIO Abort a boot */ |
| #define BOOT_SEQUENCE 0x02 /* Driver->RIO Packet with firmware details */ |
| #define BOOT_COMPLETED 0x03 /* RIO->Driver Boot completed */ |
| #define IFOAD 0x2F /* Driver->RIO Shutdown/Reboot RTA (Fall Over And Die) */ |
| #define IDENTIFY 0x30 /* Driver->RIO Identify RTA */ |
| #define ZOMBIE 0x31 /* Driver->RIO Shutdown/Flash LEDs */ |
| #define UFOAD 0x32 /* Driver->RIO Shutdown/Reboot neighbouring RTA */ |
| #define IWAIT 0x33 /* Driver->RIO Pause booting process */ |
| |
| /* ROUTE_RUP definitions... */ |
| #define ROUTE_REQUEST 0x00 /* RIO->Driver Request an ID */ |
| #define ROUTE_FOAD 0x01 /* Driver->RIO Shutdown/reboot RTA */ |
| #define ROUTE_ALREADY 0x02 /* Driver->RIO Not used */ |
| #define ROUTE_USED 0x03 /* Driver->RIO Not used */ |
| #define ROUTE_ALLOCATE 0x04 /* Driver->RIO Allocate RTA RUP numbers */ |
| #define ROUTE_REQ_TOP 0x05 /* Driver->RIO Not used */ |
| #define ROUTE_TOPOLOGY 0x06 /* RIO->Driver Route/Topology status */ |
| |
| /***************************************************************************** |
| ********************************** ********************************** |
| ********************************** OPEN ********************************** |
| ********************************** ********************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,in-band) |
| |
| Sent to open a port. |
| Structure of configuration info used with OPEN, CONFIG and MOPEN packets... */ |
| |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_Cor1 (PKT_Data+1) /* Channel Option Register 1 */ |
| #define PKT_Cor2 (PKT_Data+2) /* Channel Option Register 2 */ |
| #define PKT_Cor4 (PKT_Data+3) /* Channel Option Register 4 */ |
| #define PKT_Cor5 (PKT_Data+4) /* Channel Option Register 5 */ |
| #define PKT_TxXon (PKT_Data+5) /* Transmit XON character */ |
| #define PKT_TxXoff (PKT_Data+6) /* Transmit XOFF character */ |
| #define PKT_RxXon (PKT_Data+7) /* Receive XON character */ |
| #define PKT_RxXoff (PKT_Data+8) /* Receive XOFF character */ |
| #define PKT_Lnext (PKT_Data+9) /* Lnext character */ |
| #define PKT_TxBaud (PKT_Data+10) /* Transmit baud rate */ |
| #define PKT_RxBaud (PKT_Data+11) /* Receive baud rate */ |
| |
| /* COR1 definitions... */ |
| #define COR1_PARITY 0xE0 /* Parity mask */ |
| #define COR1_NONE 0x00 /* No parity */ |
| #define COR1_SPACE 0x20 /* Space parity */ |
| #define COR1_EVEN 0x40 /* Even parity */ |
| #define COR1_MARK 0xA0 /* Mark parity */ |
| #define COR1_ODD 0xC0 /* Odd parity */ |
| |
| #define COR1_STOPBITS 0x0C /* Stop bits mask */ |
| #define COR1_STOP1 0x00 /* 1 stop bit */ |
| #define COR1_STOP1_5 0x04 /* 1.5 stop bits */ |
| #define COR1_STOP2 0x08 /* 2 stop bits */ |
| |
| #define COR1_DATABITS 0x03 /* Data bits mask */ |
| #define COR1_DATA5 0x00 /* 5 data bits */ |
| #define COR1_DATA6 0x01 /* 6 data bits */ |
| #define COR1_DATA7 0x02 /* 7 data bits */ |
| #define COR1_DATA8 0x03 /* 8 data bits */ |
| |
| /* COR2 definitions... */ |
| #define COR2_XON_TXFLOW 0x40 /* XON/XOFF Transmit Flow */ |
| #define COR2_XANY_TXFLOW 0xC0 /* XON/XANY Transmit Flow */ |
| #define COR2_HUPCL 0x20 /* Hang Up On Close */ |
| #define COR2_DSR_TXFLOW 0x08 /* DSR Transmit Flow Control */ |
| #define COR2_RTS_RXFLOW 0x04 /* RTS Receive Flow Control */ |
| #define COR2_CTS_TXFLOW 0x02 /* CTS Transmit Flow Control */ |
| #define COR2_XON_RXFLOW 0x01 /* XON/XOFF Receive Flow */ |
| |
| /* COR4 definition... */ |
| #define COR4_IGNCR 0x80 /* Discard received CR */ |
| #define COR4_ICRNL 0x40 /* Map received CR -> NL */ |
| #define COR4_INLCR 0x20 /* Map received NL -> CR */ |
| #define COR4_IGNBRK 0x10 /* Ignore Received Break */ |
| #define COR4_NBRKINT 0x08 /* No interrupt on rx Break */ |
| #define COR4_IGNPAR 0x04 /* ignore rx parity error chars */ |
| #define COR4_PARMRK 0x02 /* Mark rx parity error chars */ |
| #define COR4_RAISEMOD 0x01 /* Raise modem lines on !0 baud */ |
| |
| /* COR5 definitions... */ |
| #define COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */ |
| #define COR5_LNE 0x40 /* Enable LNEXT processing */ |
| #define COR5_CMOE 0x20 /* Match good & error characters */ |
| #define COR5_TAB3 0x10 /* TAB3 mode */ |
| #define COR5_TSTATE_ON 0x08 /* Enable tbusy/tstop monitoring */ |
| #define COR5_TSTATE_OFF 0x04 /* Disable tbusy/tstop monitoring */ |
| #define COR5_ONLCR 0x02 /* NL -> CR NL on output */ |
| #define COR5_OCRNL 0x01 /* CR -> NL on output */ |
| |
| /* RxBaud and TxBaud definitions... */ |
| #define RIO_B0 0x00 /* RTS / DTR signals dropped */ |
| #define RIO_B50 0x01 /* 50 baud */ |
| #define RIO_B75 0x02 /* 75 baud */ |
| #define RIO_B110 0x03 /* 110 baud */ |
| #define RIO_B134 0x04 /* 134.5 baud */ |
| #define RIO_B150 0x05 /* 150 baud */ |
| #define RIO_B200 0x06 /* 200 baud */ |
| #define RIO_B300 0x07 /* 300 baud */ |
| #define RIO_B600 0x08 /* 600 baud */ |
| #define RIO_B1200 0x09 /* 1200 baud */ |
| #define RIO_B1800 0x0A /* 1800 baud */ |
| #define RIO_B2400 0x0B /* 2400 baud */ |
| #define RIO_B4800 0x0C /* 4800 baud */ |
| #define RIO_B9600 0x0D /* 9600 baud */ |
| #define RIO_B19200 0x0E /* 19200 baud */ |
| #define RIO_B38400 0x0F /* 38400 baud */ |
| #define RIO_B56000 0x10 /* 56000 baud */ |
| #define RIO_B57600 0x11 /* 57600 baud */ |
| #define RIO_B64000 0x12 /* 64000 baud */ |
| #define RIO_B115200 0x13 /* 115200 baud */ |
| #define RIO_B2000 0x14 /* 2000 baud */ |
| |
| /***************************************************************************** |
| ********************************* ********************************* |
| ********************************* CONFIG ********************************* |
| ********************************* ********************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,in-band) |
| |
| CONFIG is sent from the driver to configure an already opened port. |
| Packet structure is same as OPEN. */ |
| |
| /***************************************************************************** |
| ********************************* ********************************** |
| ********************************* MOPEN ********************************** |
| ********************************* ********************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,in-band) |
| |
| MOPEN is sent from the driver to open a port attached to a modem. (in-band) |
| Packet structure is same as OPEN. */ |
| |
| /***************************************************************************** |
| ********************************* ********************************** |
| ********************************* CLOSE ********************************** |
| ********************************* ********************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,in-band) |
| |
| CLOSE is sent from the driver to close a previously opened port. |
| No parameters. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| /***************************************************************************** |
| ********************************* ********************************* |
| ********************************* WFLUSH ********************************* |
| ********************************* ********************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| WFLUSH is sent pre-emptively from the driver to flush the write buffers and |
| packets of a port. (pre-emptive) |
| |
| WFLUSH is also sent in-band from the driver to a port as a marker to end |
| write flushing previously started by a pre-emptive WFLUSH packet. (in-band) |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| |
| /***************************************************************************** |
| ********************************* ********************************* |
| ********************************* RFLUSH ********************************* |
| ********************************* ********************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| RFLUSH is sent pre-emptively from the driver to flush the read buffers and |
| packets of a port. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #endif |
| |
| /***************************************************************************** |
| ********************************* ********************************* |
| ********************************* RESUME ********************************* |
| ********************************* ********************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| RESUME is sent pre-emptively from the driver to cause a port to resume |
| transmission of data if blocked by XOFF. (as if XON had been received) |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #endif |
| |
| /***************************************************************************** |
| ********************************* ********************************* |
| ********************************* SBREAK ********************************* |
| ********************************* ********************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,in-band) |
| |
| SBREAK is sent in-band from the driver to a port to suspend data and start |
| break signal transmission. |
| |
| If the break delay is 0, the break signal will be acknowledged with a |
| RUP_COMMAND, COMPLETE packet and continue until an EBREAK packet is received. |
| |
| Otherwise, there is no acknowledgement and the break signal will last for the |
| specified number of mS. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_BreakDelay (PKT_Data+1) /* Break delay in mS */ |
| |
| /***************************************************************************** |
| ********************************* ********************************* |
| ********************************* EBREAK ********************************* |
| ********************************* ********************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,in-band) |
| |
| EBREAK is sent in-band from the driver to a port to stop transmission of a |
| break signal. |
| |
| No parameters. */ |
| |
| /***************************************************************************** |
| ********************************* ******************************** |
| ********************************* SUSPEND ******************************** |
| ********************************* ******************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| SUSPEND is sent pre-emptively from the driver to cause a port to suspend |
| transmission of data. (as if XOFF had been received) |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #endif |
| |
| /***************************************************************************** |
| ********************************* ********************************* |
| ********************************* FCLOSE ********************************* |
| ********************************* ********************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| FCLOSE is sent pre-emptively from the driver to force close a port. |
| A force close flushes receive and transmit queues, and also lowers all output |
| modem signals if the COR5_HUPCL (Hang Up On Close) flag is set. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #endif |
| |
| /***************************************************************************** |
| ********************************* ********************************* |
| ********************************* XPRINT ********************************* |
| ********************************* ********************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,in-band) |
| |
| XPRINT is sent as a normal I/O data packet except that the PKT_CMD_BIT of |
| the "len" field is set, and the first "data" byte is XPRINT. |
| |
| The I/O data in the XPRINT packet will contain the following: |
| - Transparent Print Start Sequence |
| - Transparent Print Data |
| - Transparent Print Stop Sequence. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #endif |
| |
| /***************************************************************************** |
| ********************************** ********************************** |
| ********************************** MBIS ********************************** |
| ********************************** ********************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| MBIS is sent pre-emptively from the driver to set a port's modem signals. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #endif |
| #define PKT_ModemSet (PKT_Data+4) /* Modem set signals mask */ |
| |
| /* ModemSet definitions... */ |
| #define MBIS_RTS 0x01 /* RTS modem signal */ |
| #define MBIS_DTR 0x02 /* DTR modem signal */ |
| |
| /***************************************************************************** |
| ********************************** ********************************** |
| ********************************** MBIC ********************************** |
| ********************************** ********************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| MBIC is sent pre-emptively from the driver to clear a port's modem signals. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #endif |
| |
| #define PKT_ModemClear (PKT_Data+4) /* Modem clear signals mask */ |
| |
| /* ModemClear definitions... */ |
| #define MBIC_RTS 0x01 /* RTS modem signal */ |
| #define MBIC_DTR 0x02 /* DTR modem signal */ |
| |
| /***************************************************************************** |
| ********************************** ********************************** |
| ********************************** MSET ********************************** |
| ********************************** ********************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| MSET is sent pre-emptively from the driver to set/clear a port's modem signals. */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #endif |
| |
| #define PKT_ModemSet (PKT_Data+4) /* Modem set signals mask */ |
| |
| /* ModemSet definitions... */ |
| #define MSET_RTS 0x01 /* RTS modem signal */ |
| #define MSET_DTR 0x02 /* DTR modem signal */ |
| |
| /***************************************************************************** |
| ********************************* ********************************* |
| ********************************* PCLOSE ********************************* |
| ********************************* ********************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,in-band) |
| |
| PCLOSE is sent from the driver to pseudo close a previously opened port. |
| |
| The port will close when all data has been sent/received, however, the |
| port's transmit / receive and modem signals will be left enabled and the |
| port marked internally as Pseudo Closed. */ |
| |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| |
| /***************************************************************************** |
| ********************************** ********************************** |
| ********************************** MGET ********************************** |
| ********************************** ********************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| MGET is sent pre-emptively from the driver to request the port's current modem signals. */ |
| |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| |
| /***************************************************************************** |
| ********************************* ******************************** |
| ********************************* MEMDUMP ******************************** |
| ********************************* ******************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| MEMDUMP is sent pre-emptively from the driver to request a dump of 32 bytes |
| of the specified port's RTA address space. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #define PKT_SubCmd (PKT_Data+5) /* Sub Command */ |
| #define PKT_Address (PKT_Data+6) /* Requested address */ |
| |
| /***************************************************************************** |
| ****************************** ***************************** |
| ****************************** READ_REGISTER ***************************** |
| ****************************** ***************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| READ_REGISTER is sent pre-emptively from the driver to request the contents |
| of the CD1400 register specified in address. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #define PKT_SubCmd (PKT_Data+5) /* Sub Command */ |
| #define PKT_Address (PKT_Data+6) /* Requested address */ |
| |
| /***************************************************************************** |
| ************************ ************************** |
| ************************ COMMAND_RUP - COMPLETE ************************** |
| ************************ ************************** |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| COMMAND_RUP - COMPLETE is sent in response to all port I/O control command |
| packets, except MEMDUMP and READ_REGISTER. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ |
| #define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ |
| #define PKT_PortStatus (PKT_Data+4) /* Port signal status */ |
| #define PKT_SubCmd (PKT_Data+5) /* Sub Command */ |
| |
| /* ModemStatus definitions... */ |
| #define MODEM_DSR 0x80 /* Data Set Ready modem state */ |
| #define MODEM_CTS 0x40 /* Clear To Send modem state */ |
| #define MODEM_RI 0x20 /* Ring Indicate modem state */ |
| #define MODEM_CD 0x10 /* Carrier Detect modem state */ |
| #define MODEM_TSTOP 0x08 /* Transmit Stopped state */ |
| #define MODEM_TEMPTY 0x04 /* Transmit Empty state */ |
| #define MODEM_DTR 0x02 /* DTR modem output state */ |
| #define MODEM_RTS 0x01 /* RTS modem output state */ |
| |
| /* PortStatus definitions... */ |
| #define PORT_ISOPEN 0x01 /* Port open ? */ |
| #define PORT_HUPCL 0x02 /* Hangup on close? */ |
| #define PORT_MOPENPEND 0x04 /* Modem open pending */ |
| #define PORT_ISPARALLEL 0x08 /* Parallel port */ |
| #define PORT_BREAK 0x10 /* Port on break */ |
| #define PORT_STATUSPEND 0020 /* Status packet pending */ |
| #define PORT_BREAKPEND 0x40 /* Break packet pending */ |
| #define PORT_MODEMPEND 0x80 /* Modem status packet pending */ |
| |
| /***************************************************************************** |
| ************************ ************************** |
| ************************ COMMAND_RUP - COMPLETE ************************** |
| ************************ ************************** |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| COMMAND_RUP - COMPLETE is sent in response to all port I/O control command |
| packets, except MEMDUMP and READ_REGISTER. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ |
| #endif |
| #define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ |
| #define PKT_PortStatus (PKT_Data+4) /* Port signal status */ |
| #if 0 |
| #define PKT_SubCmd (PKT_Data+5) /* Sub Command */ |
| #endif |
| |
| /* ModemStatus definitions... */ |
| #define MODEM_DSR 0x80 /* Data Set Ready modem state */ |
| #define MODEM_CTS 0x40 /* Clear To Send modem state */ |
| #define MODEM_RI 0x20 /* Ring Indicate modem state */ |
| #define MODEM_CD 0x10 /* Carrier Detect modem state */ |
| #define MODEM_TSTOP 0x08 /* Transmit Stopped state */ |
| #define MODEM_TEMPTY 0x04 /* Transmit Empty state */ |
| #define MODEM_DTR 0x02 /* DTR modem output state */ |
| #define MODEM_RTS 0x01 /* RTS modem output state */ |
| |
| /* PortStatus definitions... */ |
| #define PORT_ISOPEN 0x01 /* Port open ? */ |
| #define PORT_HUPCL 0x02 /* Hangup on close? */ |
| #define PORT_MOPENPEND 0x04 /* Modem open pending */ |
| #define PORT_ISPARALLEL 0x08 /* Parallel port */ |
| #define PORT_BREAK 0x10 /* Port on break */ |
| #define PORT_STATUSPEND 0020 /* Status packet pending */ |
| #define PORT_BREAKPEND 0x40 /* Break packet pending */ |
| #define PORT_MODEMPEND 0x80 /* Modem status packet pending */ |
| |
| /***************************************************************************** |
| ******************** ******************** |
| ******************** COMMAND_RUP - COMPLETE - MEMDUMP ******************** |
| ******************** ******************** |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| COMMAND_RUP - COMPLETE - MEMDUMP is sent as an acknowledgement for a MEMDUMP |
| port I/O control command packet. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ |
| #define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ |
| #define PKT_PortStatus (PKT_Data+4) /* Port signal status */ |
| #define PKT_SubCmd (PKT_Data+5) /* Sub Command */ |
| #define PKT_Address (PKT_Data+6) /* Requested address */ |
| #endif |
| #define PKT_Dump (PKT_Data+8) /* 32bytes of requested dump data */ |
| |
| /***************************************************************************** |
| ***************** ***************** |
| ***************** COMMAND_RUP - COMPLETE - READ_REGISTER ***************** |
| ***************** ***************** |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| COMMAND_RUP - COMPLETE - READ_REGISTER is sent as an acknowledgement for a |
| READ_REGISTER port I/O control command packet. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /*Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /*Port number wrt RTA */ |
| #define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ |
| #endif |
| #define PKT_RegisterValue (PKT_Data+3) /* Modem signal status */ |
| #if 0 |
| #define PKT_PortStatus (PKT_Data+4) /* Port signal status */ |
| #define PKT_SubCmd (PKT_Data+5) /* Sub Command */ |
| #endif |
| |
| /***************************************************************************** |
| ********************* *********************** |
| ********************* COMMAND_RUP - BREAK_RECEIVED *********************** |
| ********************* *********************** |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| COMMAND_RUP - BREAK_RECEIVED packets are sent when the port detects a receive BREAK signal. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ |
| #endif |
| |
| /***************************************************************************** |
| ********************* ************************* |
| ********************* COMMAND_RUP - MODEM_STATUS ************************* |
| ********************* ************************* |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| COMMAND_RUP - MODEM_STATUS packets are sent whenever the port detects a |
| change in the input modem signal states. |
| |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ |
| #define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ |
| #define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ |
| #endif |
| |
| /***************************************************************************** |
| ************************ ************************* |
| ************************ BOOT_RUP - BOOT_REQUEST ************************* |
| ************************ ************************* |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| BOOT_RUP - BOOT_REQUEST packets are sent to the Driver from RIO to request |
| firmware code to load onto attached RTAs. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| |
| /***************************************************************************** |
| ************************ ************************ |
| ************************ BOOT_RUP - BOOT_SEQUENCE ************************ |
| ************************ ************************ |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| BOOT_RUP - BOOT_SEQUENCE packets are sent from the Driver to RIO in response |
| to a BOOT_RUP - BOOT_REQUEST packet. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_NumPackets (PKT_Data+2) /* Packets required to load firmware */ |
| #define PKT_LoadBase (PKT_Data+4) /* RTA firmware load address */ |
| #define PKT_CodeSize (PKT_Data+6) /* Size of firmware in bytes */ |
| #define PKT_CmdString (PKT_Data+8) /* Command string */ |
| |
| /***************************************************************************** |
| ************************ *********************** |
| ************************ BOOT_RUP - BOOT_COMPLETED *********************** |
| ************************ *********************** |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| BOOT_RUP - BOOT_COMPLETE is sent to the Driver from RIO when downloading of |
| RTA firmware has completed. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_LinkNumber (PKT_Data+1) /* Link number RTA booted on */ |
| #define PKT_SerialNumber (PKT_Data+2) /* 4 byte serial number */ |
| |
| /***************************************************************************** |
| ************************ *********************** |
| ************************ BOOT_RUP - Packet Request *********************** |
| ************************ *********************** |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| BOOT_RUP packet without the PKT_CMD_BIT set in the PKT->len field is sent |
| from RIO to the Driver as a request for a firmware boot packet. */ |
| |
| #define PKT_SequenceNumber (PKT_Data+0) /* Packet sequence number */ |
| |
| /***************************************************************************** |
| *********************** *********************** |
| *********************** BOOT_RUP - Packet Response *********************** |
| *********************** *********************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| In response to a BOOT_RUP boot packet request, the driver fills out the response |
| packet with the 70 bytes of the requested sequence. |
| */ |
| #if 0 |
| #define PKT_SequenceNumber (PKT_Data+0) /* Packet sequence number */ |
| #endif |
| #define PKT_FirmwarePacket (PKT_Data+2) /* Firmware packet */ |
| |
| /***************************************************************************** |
| **************************** **************************** |
| **************************** BOOT_RUP - IFOAD **************************** |
| **************************** **************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| BOOT_RUP - IFOAD packets are sent from the Driver to an RTA to cause the |
| RTA to shut down and reboot. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_IfoadId1 (PKT_Data+2) /* IFOAD Id 1 */ |
| #define PKT_IfoadId2 (PKT_Data+3) /* IFOAD Id 2 */ |
| |
| #define IFOADID1 0xAD |
| #define IFOADID2 0xF0 |
| |
| /***************************************************************************** |
| ************************** *************************** |
| ************************** BOOT_RUP - IDENTIFY *************************** |
| ************************** *************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| BOOT_RUP - IDENTIFY packets are sent from the Driver to an RTA to cause the |
| RTA to flash its LEDs for a period of time. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_IdentifyId (PKT_Data+2) /* defines pattern to flash */ |
| |
| /***************************************************************************** |
| **************************** *************************** |
| **************************** BOOT_RUP - ZOMBIE *************************** |
| **************************** *************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| BOOT_RUP - ZOMBIE packets are sent from the Driver to an RTA to cause the |
| RTA to shut down and flash it's LEDs. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_ZombieId1 (PKT_Data+2) /* ZOMBIE Id 1 */ |
| #define PKT_ZombieId2 (PKT_Data+3) /* ZOMBIE Id 2 */ |
| |
| #define ZOMBIEID1 0x52 |
| #define ZOMBIEID2 0x21 |
| |
| /***************************************************************************** |
| **************************** **************************** |
| **************************** BOOT_RUP - UFOAD **************************** |
| **************************** **************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| BOOT_RUP - UFOAD packets are sent from the Driver to an RTA to cause the RTA |
| to ask it's neighbouring RTA to shut down and reboot. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_LinkNumber (PKT_Data+1) /* Link number of RTA to UFOAD */ |
| #endif |
| #define PKT_UfoadId1 (PKT_Data+2) /* UFOAD Id 1 */ |
| #define PKT_UfoadId2 (PKT_Data+3) /* UFOAD Id 2 */ |
| |
| #define UFOADID1 0x1E |
| #define UFOADID2 0x0D |
| |
| /***************************************************************************** |
| **************************** **************************** |
| **************************** BOOT_RUP - IWAIT **************************** |
| **************************** **************************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| BOOT_RUP - IWAIT packets are sent from the Driver to an RTA to cause the RTA |
| to pause booting on the specified link for 30 seconds. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #define PKT_LinkNumber (PKT_Data+1) /* Link number of RTA to UFOAD */ |
| #endif |
| #define PKT_IwaitId1 (PKT_Data+2) /* IWAIT Id 1 */ |
| #define PKT_IwaitId2 (PKT_Data+3) /* IWAIT Id 2 */ |
| |
| #define IWAITID1 0xDE |
| #define IWAITID2 0xB1 |
| |
| /***************************************************************************** |
| ************************ *********************** |
| ************************ ROUTE_RUP - ROUTE_REQUEST *********************** |
| ************************ *********************** |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| ROUTE_RUP - ROUTE_REQUEST packets are sent from a newly booted or connected |
| RTA to a Driver to request an ID (RUP or unit number). |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_SerialNumber (PKT_Data+2) /* 4 byte serial number */ |
| #define PKT_ModuleTypes (PKT_Data+6) /* RTA Module types */ |
| |
| /* ModuleTypes definitions... */ |
| #define MOD_BLANK 0x0F /* Blank plate attached */ |
| #define MOD_RS232DB25 0x00 /* RS232 DB25 connector */ |
| #define MOD_RS232RJ45 0x01 /* RS232 RJ45 connector */ |
| #define MOD_RS422DB25 0x02 /* RS422 DB25 connector */ |
| #define MOD_RS485DB25 0x03 /* RS485 DB25 connector */ |
| #define MOD_PARALLEL 0x04 /* Centronics parallel */ |
| |
| #define MOD2 0x08 /* Set to indicate Rev2 module */ |
| |
| /***************************************************************************** |
| ************************* ************************* |
| ************************* ROUTE_RUP - ROUTE_FOAD ************************* |
| ************************* ************************* |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| ROUTE_RUP - ROUTE_FOAD packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST |
| packet to cause the RTA to "Fall Over And Die"., i.e. shutdown and reboot. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_RouteCmdString (PKT_Data+2) /* Command string */ |
| |
| /***************************************************************************** |
| *********************** *********************** |
| *********************** ROUTE_RUP - ROUTE_ALLOCATE *********************** |
| *********************** *********************** |
| *****************************************************************************/ |
| |
| /* (Driver->RIO,pre-emptive) |
| |
| ROUTE_RUP - ROUTE_ALLOCATE packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST |
| packet to allocate the RTA's Id number (RUP number 1..16) |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_IdNum (PKT_Data+1) /* RUP number for ports 1..8 */ |
| #if 0 |
| #define PKT_RouteCmdString (PKT_Data+2) /* Command string */ |
| #endif |
| #define PKT_IdNum2 (PKT_Data+0x17) /* RUP number for ports 9..16 */ |
| |
| /***************************************************************************** |
| *********************** *********************** |
| *********************** ROUTE_RUP - ROUTE_TOPOLOGY *********************** |
| *********************** *********************** |
| *****************************************************************************/ |
| |
| /* (RIO->Driver,pre-emptive) |
| |
| ROUTE_RUP - ROUTE_TOPOLOGY packet is sent to inform the driver of an RTA's |
| current link status. |
| */ |
| #if 0 |
| #define PKT_Cmd (PKT_Data+0) /* Command code */ |
| #endif |
| #define PKT_Link1Rup (PKT_Data+2) /* Link 1 RUP number */ |
| #define PKT_Link1Link (PKT_Data+3) /* Link 1 link number */ |
| #define PKT_Link2Rup (PKT_Data+4) /* Link 2 RUP number */ |
| #define PKT_Link2Link (PKT_Data+5) /* Link 2 link number */ |
| #define PKT_Link3Rup (PKT_Data+6) /* Link 3 RUP number */ |
| #define PKT_Link3Link (PKT_Data+7) /* Link 3 link number */ |
| #define PKT_Link4Rup (PKT_Data+8) /* Link 4 RUP number */ |
| #define PKT_Link4Link (PKT_Data+9) /* Link 4 link number */ |
| #define PKT_RtaVpdProm (PKT_Data+10) /* 32 bytes of RTA VPD PROM Contents */ |
| |
| #endif /* _sxwinif_h */ |
| |
| /* End of RIOWINIF.H */ |