| /* |
| * Port for PPC64 David Engebretsen, IBM Corp. |
| * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. |
| * |
| * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM |
| * Rework, based on alpha PCI code. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/bootmem.h> |
| #include <linux/mm.h> |
| #include <linux/list.h> |
| #include <linux/syscalls.h> |
| |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/byteorder.h> |
| #include <asm/irq.h> |
| #include <asm/machdep.h> |
| #include <asm/udbg.h> |
| #include <asm/ppc-pci.h> |
| |
| #ifdef DEBUG |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| unsigned long pci_probe_only = 1; |
| unsigned long pci_assign_all_buses = 0; |
| |
| /* |
| * legal IO pages under MAX_ISA_PORT. This is to ensure we don't touch |
| * devices we don't have access to. |
| */ |
| unsigned long io_page_mask; |
| |
| EXPORT_SYMBOL(io_page_mask); |
| |
| #ifdef CONFIG_PPC_MULTIPLATFORM |
| static void fixup_resource(struct resource *res, struct pci_dev *dev); |
| static void do_bus_setup(struct pci_bus *bus); |
| #endif |
| |
| unsigned int pcibios_assign_all_busses(void) |
| { |
| return pci_assign_all_buses; |
| } |
| |
| /* pci_io_base -- the base address from which io bars are offsets. |
| * This is the lowest I/O base address (so bar values are always positive), |
| * and it *must* be the start of ISA space if an ISA bus exists because |
| * ISA drivers use hard coded offsets. If no ISA bus exists a dummy |
| * page is mapped and isa_io_limit prevents access to it. |
| */ |
| unsigned long isa_io_base; /* NULL if no ISA bus */ |
| EXPORT_SYMBOL(isa_io_base); |
| unsigned long pci_io_base; |
| EXPORT_SYMBOL(pci_io_base); |
| |
| void iSeries_pcibios_init(void); |
| |
| LIST_HEAD(hose_list); |
| |
| struct dma_mapping_ops pci_dma_ops; |
| EXPORT_SYMBOL(pci_dma_ops); |
| |
| int global_phb_number; /* Global phb counter */ |
| |
| /* Cached ISA bridge dev. */ |
| struct pci_dev *ppc64_isabridge_dev = NULL; |
| |
| static void fixup_broken_pcnet32(struct pci_dev* dev) |
| { |
| if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { |
| dev->vendor = PCI_VENDOR_ID_AMD; |
| pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); |
| |
| void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, |
| struct resource *res) |
| { |
| unsigned long offset = 0; |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| |
| if (!hose) |
| return; |
| |
| if (res->flags & IORESOURCE_IO) |
| offset = (unsigned long)hose->io_base_virt - pci_io_base; |
| |
| if (res->flags & IORESOURCE_MEM) |
| offset = hose->pci_mem_offset; |
| |
| region->start = res->start - offset; |
| region->end = res->end - offset; |
| } |
| |
| void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, |
| struct pci_bus_region *region) |
| { |
| unsigned long offset = 0; |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| |
| if (!hose) |
| return; |
| |
| if (res->flags & IORESOURCE_IO) |
| offset = (unsigned long)hose->io_base_virt - pci_io_base; |
| |
| if (res->flags & IORESOURCE_MEM) |
| offset = hose->pci_mem_offset; |
| |
| res->start = region->start + offset; |
| res->end = region->end + offset; |
| } |
| |
| #ifdef CONFIG_HOTPLUG |
| EXPORT_SYMBOL(pcibios_resource_to_bus); |
| EXPORT_SYMBOL(pcibios_bus_to_resource); |
| #endif |
| |
| /* |
| * We need to avoid collisions with `mirrored' VGA ports |
| * and other strange ISA hardware, so we always want the |
| * addresses to be allocated in the 0x000-0x0ff region |
| * modulo 0x400. |
| * |
| * Why? Because some silly external IO cards only decode |
| * the low 10 bits of the IO address. The 0x00-0xff region |
| * is reserved for motherboard devices that decode all 16 |
| * bits, so it's ok to allocate at, say, 0x2800-0x28ff, |
| * but we want to try to avoid allocating at 0x2900-0x2bff |
| * which might have be mirrored at 0x0100-0x03ff.. |
| */ |
| void pcibios_align_resource(void *data, struct resource *res, |
| unsigned long size, unsigned long align) |
| { |
| struct pci_dev *dev = data; |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| unsigned long start = res->start; |
| unsigned long alignto; |
| |
| if (res->flags & IORESOURCE_IO) { |
| unsigned long offset = (unsigned long)hose->io_base_virt - |
| pci_io_base; |
| /* Make sure we start at our min on all hoses */ |
| if (start - offset < PCIBIOS_MIN_IO) |
| start = PCIBIOS_MIN_IO + offset; |
| |
| /* |
| * Put everything into 0x00-0xff region modulo 0x400 |
| */ |
| if (start & 0x300) |
| start = (start + 0x3ff) & ~0x3ff; |
| |
| } else if (res->flags & IORESOURCE_MEM) { |
| /* Make sure we start at our min on all hoses */ |
| if (start - hose->pci_mem_offset < PCIBIOS_MIN_MEM) |
| start = PCIBIOS_MIN_MEM + hose->pci_mem_offset; |
| |
| /* Align to multiple of size of minimum base. */ |
| alignto = max(0x1000UL, align); |
| start = ALIGN(start, alignto); |
| } |
| |
| res->start = start; |
| } |
| |
| static DEFINE_SPINLOCK(hose_spinlock); |
| |
| /* |
| * pci_controller(phb) initialized common variables. |
| */ |
| void __devinit pci_setup_pci_controller(struct pci_controller *hose) |
| { |
| memset(hose, 0, sizeof(struct pci_controller)); |
| |
| spin_lock(&hose_spinlock); |
| hose->global_number = global_phb_number++; |
| list_add_tail(&hose->list_node, &hose_list); |
| spin_unlock(&hose_spinlock); |
| } |
| |
| static void __init pcibios_claim_one_bus(struct pci_bus *b) |
| { |
| struct pci_dev *dev; |
| struct pci_bus *child_bus; |
| |
| list_for_each_entry(dev, &b->devices, bus_list) { |
| int i; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| struct resource *r = &dev->resource[i]; |
| |
| if (r->parent || !r->start || !r->flags) |
| continue; |
| pci_claim_resource(dev, i); |
| } |
| } |
| |
| list_for_each_entry(child_bus, &b->children, node) |
| pcibios_claim_one_bus(child_bus); |
| } |
| |
| #ifndef CONFIG_PPC_ISERIES |
| static void __init pcibios_claim_of_setup(void) |
| { |
| struct pci_bus *b; |
| |
| list_for_each_entry(b, &pci_root_buses, node) |
| pcibios_claim_one_bus(b); |
| } |
| #endif |
| |
| #ifdef CONFIG_PPC_MULTIPLATFORM |
| static u32 get_int_prop(struct device_node *np, const char *name, u32 def) |
| { |
| u32 *prop; |
| int len; |
| |
| prop = (u32 *) get_property(np, name, &len); |
| if (prop && len >= 4) |
| return *prop; |
| return def; |
| } |
| |
| static unsigned int pci_parse_of_flags(u32 addr0) |
| { |
| unsigned int flags = 0; |
| |
| if (addr0 & 0x02000000) { |
| flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; |
| flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; |
| flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; |
| if (addr0 & 0x40000000) |
| flags |= IORESOURCE_PREFETCH |
| | PCI_BASE_ADDRESS_MEM_PREFETCH; |
| } else if (addr0 & 0x01000000) |
| flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; |
| return flags; |
| } |
| |
| #define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) |
| |
| static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) |
| { |
| u64 base, size; |
| unsigned int flags; |
| struct resource *res; |
| u32 *addrs, i; |
| int proplen; |
| |
| addrs = (u32 *) get_property(node, "assigned-addresses", &proplen); |
| if (!addrs) |
| return; |
| for (; proplen >= 20; proplen -= 20, addrs += 5) { |
| flags = pci_parse_of_flags(addrs[0]); |
| if (!flags) |
| continue; |
| base = GET_64BIT(addrs, 1); |
| size = GET_64BIT(addrs, 3); |
| if (!size) |
| continue; |
| i = addrs[0] & 0xff; |
| if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { |
| res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; |
| } else if (i == dev->rom_base_reg) { |
| res = &dev->resource[PCI_ROM_RESOURCE]; |
| flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; |
| } else { |
| printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); |
| continue; |
| } |
| res->start = base; |
| res->end = base + size - 1; |
| res->flags = flags; |
| res->name = pci_name(dev); |
| fixup_resource(res, dev); |
| } |
| } |
| |
| struct pci_dev *of_create_pci_dev(struct device_node *node, |
| struct pci_bus *bus, int devfn) |
| { |
| struct pci_dev *dev; |
| const char *type; |
| |
| dev = kmalloc(sizeof(struct pci_dev), GFP_KERNEL); |
| if (!dev) |
| return NULL; |
| type = get_property(node, "device_type", NULL); |
| if (type == NULL) |
| type = ""; |
| |
| memset(dev, 0, sizeof(struct pci_dev)); |
| dev->bus = bus; |
| dev->sysdata = node; |
| dev->dev.parent = bus->bridge; |
| dev->dev.bus = &pci_bus_type; |
| dev->devfn = devfn; |
| dev->multifunction = 0; /* maybe a lie? */ |
| |
| dev->vendor = get_int_prop(node, "vendor-id", 0xffff); |
| dev->device = get_int_prop(node, "device-id", 0xffff); |
| dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); |
| dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); |
| |
| dev->cfg_size = 256; /*pci_cfg_space_size(dev);*/ |
| |
| sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), |
| dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); |
| dev->class = get_int_prop(node, "class-code", 0); |
| |
| dev->current_state = 4; /* unknown power state */ |
| |
| if (!strcmp(type, "pci")) { |
| /* a PCI-PCI bridge */ |
| dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; |
| dev->rom_base_reg = PCI_ROM_ADDRESS1; |
| } else if (!strcmp(type, "cardbus")) { |
| dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; |
| } else { |
| dev->hdr_type = PCI_HEADER_TYPE_NORMAL; |
| dev->rom_base_reg = PCI_ROM_ADDRESS; |
| dev->irq = NO_IRQ; |
| if (node->n_intrs > 0) { |
| dev->irq = node->intrs[0].line; |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, |
| dev->irq); |
| } |
| } |
| |
| pci_parse_of_addrs(node, dev); |
| |
| pci_device_add(dev, bus); |
| |
| /* XXX pci_scan_msi_device(dev); */ |
| |
| return dev; |
| } |
| EXPORT_SYMBOL(of_create_pci_dev); |
| |
| void __devinit of_scan_bus(struct device_node *node, |
| struct pci_bus *bus) |
| { |
| struct device_node *child = NULL; |
| u32 *reg; |
| int reglen, devfn; |
| struct pci_dev *dev; |
| |
| while ((child = of_get_next_child(node, child)) != NULL) { |
| reg = (u32 *) get_property(child, "reg", ®len); |
| if (reg == NULL || reglen < 20) |
| continue; |
| devfn = (reg[0] >> 8) & 0xff; |
| /* create a new pci_dev for this device */ |
| dev = of_create_pci_dev(child, bus, devfn); |
| if (!dev) |
| continue; |
| if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || |
| dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) |
| of_scan_pci_bridge(child, dev); |
| } |
| |
| do_bus_setup(bus); |
| } |
| EXPORT_SYMBOL(of_scan_bus); |
| |
| void __devinit of_scan_pci_bridge(struct device_node *node, |
| struct pci_dev *dev) |
| { |
| struct pci_bus *bus; |
| u32 *busrange, *ranges; |
| int len, i, mode; |
| struct resource *res; |
| unsigned int flags; |
| u64 size; |
| |
| /* parse bus-range property */ |
| busrange = (u32 *) get_property(node, "bus-range", &len); |
| if (busrange == NULL || len != 8) { |
| printk(KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n", |
| node->full_name); |
| return; |
| } |
| ranges = (u32 *) get_property(node, "ranges", &len); |
| if (ranges == NULL) { |
| printk(KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n", |
| node->full_name); |
| return; |
| } |
| |
| bus = pci_add_new_bus(dev->bus, dev, busrange[0]); |
| if (!bus) { |
| printk(KERN_ERR "Failed to create pci bus for %s\n", |
| node->full_name); |
| return; |
| } |
| |
| bus->primary = dev->bus->number; |
| bus->subordinate = busrange[1]; |
| bus->bridge_ctl = 0; |
| bus->sysdata = node; |
| |
| /* parse ranges property */ |
| /* PCI #address-cells == 3 and #size-cells == 2 always */ |
| res = &dev->resource[PCI_BRIDGE_RESOURCES]; |
| for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { |
| res->flags = 0; |
| bus->resource[i] = res; |
| ++res; |
| } |
| i = 1; |
| for (; len >= 32; len -= 32, ranges += 8) { |
| flags = pci_parse_of_flags(ranges[0]); |
| size = GET_64BIT(ranges, 6); |
| if (flags == 0 || size == 0) |
| continue; |
| if (flags & IORESOURCE_IO) { |
| res = bus->resource[0]; |
| if (res->flags) { |
| printk(KERN_ERR "PCI: ignoring extra I/O range" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| } else { |
| if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { |
| printk(KERN_ERR "PCI: too many memory ranges" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| res = bus->resource[i]; |
| ++i; |
| } |
| res->start = GET_64BIT(ranges, 1); |
| res->end = res->start + size - 1; |
| res->flags = flags; |
| fixup_resource(res, dev); |
| } |
| sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), |
| bus->number); |
| |
| mode = PCI_PROBE_NORMAL; |
| if (ppc_md.pci_probe_mode) |
| mode = ppc_md.pci_probe_mode(bus); |
| if (mode == PCI_PROBE_DEVTREE) |
| of_scan_bus(node, bus); |
| else if (mode == PCI_PROBE_NORMAL) |
| pci_scan_child_bus(bus); |
| } |
| EXPORT_SYMBOL(of_scan_pci_bridge); |
| #endif /* CONFIG_PPC_MULTIPLATFORM */ |
| |
| void __devinit scan_phb(struct pci_controller *hose) |
| { |
| struct pci_bus *bus; |
| struct device_node *node = hose->arch_data; |
| int i, mode; |
| struct resource *res; |
| |
| bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node); |
| if (bus == NULL) { |
| printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", |
| hose->global_number); |
| return; |
| } |
| bus->secondary = hose->first_busno; |
| hose->bus = bus; |
| |
| bus->resource[0] = res = &hose->io_resource; |
| if (res->flags && request_resource(&ioport_resource, res)) |
| printk(KERN_ERR "Failed to request PCI IO region " |
| "on PCI domain %04x\n", hose->global_number); |
| |
| for (i = 0; i < 3; ++i) { |
| res = &hose->mem_resources[i]; |
| bus->resource[i+1] = res; |
| if (res->flags && request_resource(&iomem_resource, res)) |
| printk(KERN_ERR "Failed to request PCI memory region " |
| "on PCI domain %04x\n", hose->global_number); |
| } |
| |
| mode = PCI_PROBE_NORMAL; |
| #ifdef CONFIG_PPC_MULTIPLATFORM |
| if (ppc_md.pci_probe_mode) |
| mode = ppc_md.pci_probe_mode(bus); |
| if (mode == PCI_PROBE_DEVTREE) { |
| bus->subordinate = hose->last_busno; |
| of_scan_bus(node, bus); |
| } |
| #endif /* CONFIG_PPC_MULTIPLATFORM */ |
| if (mode == PCI_PROBE_NORMAL) |
| hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); |
| pci_bus_add_devices(bus); |
| } |
| |
| static int __init pcibios_init(void) |
| { |
| struct pci_controller *hose, *tmp; |
| |
| /* For now, override phys_mem_access_prot. If we need it, |
| * later, we may move that initialization to each ppc_md |
| */ |
| ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; |
| |
| #ifdef CONFIG_PPC_ISERIES |
| iSeries_pcibios_init(); |
| #endif |
| |
| printk("PCI: Probing PCI hardware\n"); |
| |
| /* Scan all of the recorded PCI controllers. */ |
| list_for_each_entry_safe(hose, tmp, &hose_list, list_node) |
| scan_phb(hose); |
| |
| #ifndef CONFIG_PPC_ISERIES |
| if (pci_probe_only) |
| pcibios_claim_of_setup(); |
| else |
| /* FIXME: `else' will be removed when |
| pci_assign_unassigned_resources() is able to work |
| correctly with [partially] allocated PCI tree. */ |
| pci_assign_unassigned_resources(); |
| #endif /* !CONFIG_PPC_ISERIES */ |
| |
| /* Call machine dependent final fixup */ |
| if (ppc_md.pcibios_fixup) |
| ppc_md.pcibios_fixup(); |
| |
| /* Cache the location of the ISA bridge (if we have one) */ |
| ppc64_isabridge_dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); |
| if (ppc64_isabridge_dev != NULL) |
| printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); |
| |
| #ifdef CONFIG_PPC_MULTIPLATFORM |
| /* map in PCI I/O space */ |
| phbs_remap_io(); |
| #endif |
| |
| printk("PCI: Probing PCI hardware done\n"); |
| |
| return 0; |
| } |
| |
| subsys_initcall(pcibios_init); |
| |
| char __init *pcibios_setup(char *str) |
| { |
| return str; |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, oldcmd; |
| int i; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| oldcmd = cmd; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| struct resource *res = &dev->resource[i]; |
| |
| /* Only set up the requested stuff */ |
| if (!(mask & (1<<i))) |
| continue; |
| |
| if (res->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (res->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| |
| if (cmd != oldcmd) { |
| printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", |
| pci_name(dev), cmd); |
| /* Enable the appropriate bits in the PCI command register. */ |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| /* |
| * Return the domain number for this bus. |
| */ |
| int pci_domain_nr(struct pci_bus *bus) |
| { |
| #ifdef CONFIG_PPC_ISERIES |
| return 0; |
| #else |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| |
| return hose->global_number; |
| #endif |
| } |
| |
| EXPORT_SYMBOL(pci_domain_nr); |
| |
| /* Decide whether to display the domain number in /proc */ |
| int pci_proc_domain(struct pci_bus *bus) |
| { |
| #ifdef CONFIG_PPC_ISERIES |
| return 0; |
| #else |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| return hose->buid; |
| #endif |
| } |
| |
| /* |
| * Platform support for /proc/bus/pci/X/Y mmap()s, |
| * modelled on the sparc64 implementation by Dave Miller. |
| * -- paulus. |
| */ |
| |
| /* |
| * Adjust vm_pgoff of VMA such that it is the physical page offset |
| * corresponding to the 32-bit pci bus offset for DEV requested by the user. |
| * |
| * Basically, the user finds the base address for his device which he wishes |
| * to mmap. They read the 32-bit value from the config space base register, |
| * add whatever PAGE_SIZE multiple offset they wish, and feed this into the |
| * offset parameter of mmap on /proc/bus/pci/XXX for that device. |
| * |
| * Returns negative error code on failure, zero on success. |
| */ |
| static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, |
| unsigned long *offset, |
| enum pci_mmap_state mmap_state) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| unsigned long io_offset = 0; |
| int i, res_bit; |
| |
| if (hose == 0) |
| return NULL; /* should never happen */ |
| |
| /* If memory, add on the PCI bridge address offset */ |
| if (mmap_state == pci_mmap_mem) { |
| *offset += hose->pci_mem_offset; |
| res_bit = IORESOURCE_MEM; |
| } else { |
| io_offset = (unsigned long)hose->io_base_virt - pci_io_base; |
| *offset += io_offset; |
| res_bit = IORESOURCE_IO; |
| } |
| |
| /* |
| * Check that the offset requested corresponds to one of the |
| * resources of the device. |
| */ |
| for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| struct resource *rp = &dev->resource[i]; |
| int flags = rp->flags; |
| |
| /* treat ROM as memory (should be already) */ |
| if (i == PCI_ROM_RESOURCE) |
| flags |= IORESOURCE_MEM; |
| |
| /* Active and same type? */ |
| if ((flags & res_bit) == 0) |
| continue; |
| |
| /* In the range of this resource? */ |
| if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) |
| continue; |
| |
| /* found it! construct the final physical address */ |
| if (mmap_state == pci_mmap_io) |
| *offset += hose->io_base_phys - io_offset; |
| return rp; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci |
| * device mapping. |
| */ |
| static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, |
| pgprot_t protection, |
| enum pci_mmap_state mmap_state, |
| int write_combine) |
| { |
| unsigned long prot = pgprot_val(protection); |
| |
| /* Write combine is always 0 on non-memory space mappings. On |
| * memory space, if the user didn't pass 1, we check for a |
| * "prefetchable" resource. This is a bit hackish, but we use |
| * this to workaround the inability of /sysfs to provide a write |
| * combine bit |
| */ |
| if (mmap_state != pci_mmap_mem) |
| write_combine = 0; |
| else if (write_combine == 0) { |
| if (rp->flags & IORESOURCE_PREFETCH) |
| write_combine = 1; |
| } |
| |
| /* XXX would be nice to have a way to ask for write-through */ |
| prot |= _PAGE_NO_CACHE; |
| if (write_combine) |
| prot &= ~_PAGE_GUARDED; |
| else |
| prot |= _PAGE_GUARDED; |
| |
| printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start, |
| prot); |
| |
| return __pgprot(prot); |
| } |
| |
| /* |
| * This one is used by /dev/mem and fbdev who have no clue about the |
| * PCI device, it tries to find the PCI device first and calls the |
| * above routine |
| */ |
| pgprot_t pci_phys_mem_access_prot(struct file *file, |
| unsigned long pfn, |
| unsigned long size, |
| pgprot_t protection) |
| { |
| struct pci_dev *pdev = NULL; |
| struct resource *found = NULL; |
| unsigned long prot = pgprot_val(protection); |
| unsigned long offset = pfn << PAGE_SHIFT; |
| int i; |
| |
| if (page_is_ram(pfn)) |
| return __pgprot(prot); |
| |
| prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; |
| |
| for_each_pci_dev(pdev) { |
| for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| struct resource *rp = &pdev->resource[i]; |
| int flags = rp->flags; |
| |
| /* Active and same type? */ |
| if ((flags & IORESOURCE_MEM) == 0) |
| continue; |
| /* In the range of this resource? */ |
| if (offset < (rp->start & PAGE_MASK) || |
| offset > rp->end) |
| continue; |
| found = rp; |
| break; |
| } |
| if (found) |
| break; |
| } |
| if (found) { |
| if (found->flags & IORESOURCE_PREFETCH) |
| prot &= ~_PAGE_GUARDED; |
| pci_dev_put(pdev); |
| } |
| |
| DBG("non-PCI map for %lx, prot: %lx\n", offset, prot); |
| |
| return __pgprot(prot); |
| } |
| |
| |
| /* |
| * Perform the actual remap of the pages for a PCI device mapping, as |
| * appropriate for this architecture. The region in the process to map |
| * is described by vm_start and vm_end members of VMA, the base physical |
| * address is found in vm_pgoff. |
| * The pci device structure is provided so that architectures may make mapping |
| * decisions on a per-device or per-bus basis. |
| * |
| * Returns a negative error code on failure, zero on success. |
| */ |
| int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state, |
| int write_combine) |
| { |
| unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; |
| struct resource *rp; |
| int ret; |
| |
| rp = __pci_mmap_make_offset(dev, &offset, mmap_state); |
| if (rp == NULL) |
| return -EINVAL; |
| |
| vma->vm_pgoff = offset >> PAGE_SHIFT; |
| vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO; |
| vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, |
| vma->vm_page_prot, |
| mmap_state, write_combine); |
| |
| ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, |
| vma->vm_end - vma->vm_start, vma->vm_page_prot); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PPC_MULTIPLATFORM |
| static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct pci_dev *pdev; |
| struct device_node *np; |
| |
| pdev = to_pci_dev (dev); |
| np = pci_device_to_OF_node(pdev); |
| if (np == NULL || np->full_name == NULL) |
| return 0; |
| return sprintf(buf, "%s", np->full_name); |
| } |
| static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); |
| #endif /* CONFIG_PPC_MULTIPLATFORM */ |
| |
| void pcibios_add_platform_entries(struct pci_dev *pdev) |
| { |
| #ifdef CONFIG_PPC_MULTIPLATFORM |
| device_create_file(&pdev->dev, &dev_attr_devspec); |
| #endif /* CONFIG_PPC_MULTIPLATFORM */ |
| } |
| |
| #ifdef CONFIG_PPC_MULTIPLATFORM |
| |
| #define ISA_SPACE_MASK 0x1 |
| #define ISA_SPACE_IO 0x1 |
| |
| static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, |
| unsigned long phb_io_base_phys, |
| void __iomem * phb_io_base_virt) |
| { |
| struct isa_range *range; |
| unsigned long pci_addr; |
| unsigned int isa_addr; |
| unsigned int size; |
| int rlen = 0; |
| |
| range = (struct isa_range *) get_property(isa_node, "ranges", &rlen); |
| if (range == NULL || (rlen < sizeof(struct isa_range))) { |
| printk(KERN_ERR "no ISA ranges or unexpected isa range size," |
| "mapping 64k\n"); |
| __ioremap_explicit(phb_io_base_phys, |
| (unsigned long)phb_io_base_virt, |
| 0x10000, _PAGE_NO_CACHE | _PAGE_GUARDED); |
| return; |
| } |
| |
| /* From "ISA Binding to 1275" |
| * The ranges property is laid out as an array of elements, |
| * each of which comprises: |
| * cells 0 - 1: an ISA address |
| * cells 2 - 4: a PCI address |
| * (size depending on dev->n_addr_cells) |
| * cell 5: the size of the range |
| */ |
| if ((range->isa_addr.a_hi && ISA_SPACE_MASK) == ISA_SPACE_IO) { |
| isa_addr = range->isa_addr.a_lo; |
| pci_addr = (unsigned long) range->pci_addr.a_mid << 32 | |
| range->pci_addr.a_lo; |
| |
| /* Assume these are both zero */ |
| if ((pci_addr != 0) || (isa_addr != 0)) { |
| printk(KERN_ERR "unexpected isa to pci mapping: %s\n", |
| __FUNCTION__); |
| return; |
| } |
| |
| size = PAGE_ALIGN(range->size); |
| |
| __ioremap_explicit(phb_io_base_phys, |
| (unsigned long) phb_io_base_virt, |
| size, _PAGE_NO_CACHE | _PAGE_GUARDED); |
| } |
| } |
| |
| void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, |
| struct device_node *dev, int prim) |
| { |
| unsigned int *ranges, pci_space; |
| unsigned long size; |
| int rlen = 0; |
| int memno = 0; |
| struct resource *res; |
| int np, na = prom_n_addr_cells(dev); |
| unsigned long pci_addr, cpu_phys_addr; |
| |
| np = na + 5; |
| |
| /* From "PCI Binding to 1275" |
| * The ranges property is laid out as an array of elements, |
| * each of which comprises: |
| * cells 0 - 2: a PCI address |
| * cells 3 or 3+4: a CPU physical address |
| * (size depending on dev->n_addr_cells) |
| * cells 4+5 or 5+6: the size of the range |
| */ |
| rlen = 0; |
| hose->io_base_phys = 0; |
| ranges = (unsigned int *) get_property(dev, "ranges", &rlen); |
| while ((rlen -= np * sizeof(unsigned int)) >= 0) { |
| res = NULL; |
| pci_space = ranges[0]; |
| pci_addr = ((unsigned long)ranges[1] << 32) | ranges[2]; |
| |
| cpu_phys_addr = ranges[3]; |
| if (na >= 2) |
| cpu_phys_addr = (cpu_phys_addr << 32) | ranges[4]; |
| |
| size = ((unsigned long)ranges[na+3] << 32) | ranges[na+4]; |
| ranges += np; |
| if (size == 0) |
| continue; |
| |
| /* Now consume following elements while they are contiguous */ |
| while (rlen >= np * sizeof(unsigned int)) { |
| unsigned long addr, phys; |
| |
| if (ranges[0] != pci_space) |
| break; |
| addr = ((unsigned long)ranges[1] << 32) | ranges[2]; |
| phys = ranges[3]; |
| if (na >= 2) |
| phys = (phys << 32) | ranges[4]; |
| if (addr != pci_addr + size || |
| phys != cpu_phys_addr + size) |
| break; |
| |
| size += ((unsigned long)ranges[na+3] << 32) |
| | ranges[na+4]; |
| ranges += np; |
| rlen -= np * sizeof(unsigned int); |
| } |
| |
| switch ((pci_space >> 24) & 0x3) { |
| case 1: /* I/O space */ |
| hose->io_base_phys = cpu_phys_addr; |
| hose->pci_io_size = size; |
| |
| res = &hose->io_resource; |
| res->flags = IORESOURCE_IO; |
| res->start = pci_addr; |
| DBG("phb%d: IO 0x%lx -> 0x%lx\n", hose->global_number, |
| res->start, res->start + size - 1); |
| break; |
| case 2: /* memory space */ |
| memno = 0; |
| while (memno < 3 && hose->mem_resources[memno].flags) |
| ++memno; |
| |
| if (memno == 0) |
| hose->pci_mem_offset = cpu_phys_addr - pci_addr; |
| if (memno < 3) { |
| res = &hose->mem_resources[memno]; |
| res->flags = IORESOURCE_MEM; |
| res->start = cpu_phys_addr; |
| DBG("phb%d: MEM 0x%lx -> 0x%lx\n", hose->global_number, |
| res->start, res->start + size - 1); |
| } |
| break; |
| } |
| if (res != NULL) { |
| res->name = dev->full_name; |
| res->end = res->start + size - 1; |
| res->parent = NULL; |
| res->sibling = NULL; |
| res->child = NULL; |
| } |
| } |
| } |
| |
| void __init pci_setup_phb_io(struct pci_controller *hose, int primary) |
| { |
| unsigned long size = hose->pci_io_size; |
| unsigned long io_virt_offset; |
| struct resource *res; |
| struct device_node *isa_dn; |
| |
| hose->io_base_virt = reserve_phb_iospace(size); |
| DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", |
| hose->global_number, hose->io_base_phys, |
| (unsigned long) hose->io_base_virt); |
| |
| if (primary) { |
| pci_io_base = (unsigned long)hose->io_base_virt; |
| isa_dn = of_find_node_by_type(NULL, "isa"); |
| if (isa_dn) { |
| isa_io_base = pci_io_base; |
| pci_process_ISA_OF_ranges(isa_dn, hose->io_base_phys, |
| hose->io_base_virt); |
| of_node_put(isa_dn); |
| /* Allow all IO */ |
| io_page_mask = -1; |
| } |
| } |
| |
| io_virt_offset = (unsigned long)hose->io_base_virt - pci_io_base; |
| res = &hose->io_resource; |
| res->start += io_virt_offset; |
| res->end += io_virt_offset; |
| } |
| |
| void __devinit pci_setup_phb_io_dynamic(struct pci_controller *hose, |
| int primary) |
| { |
| unsigned long size = hose->pci_io_size; |
| unsigned long io_virt_offset; |
| struct resource *res; |
| |
| hose->io_base_virt = __ioremap(hose->io_base_phys, size, |
| _PAGE_NO_CACHE | _PAGE_GUARDED); |
| DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", |
| hose->global_number, hose->io_base_phys, |
| (unsigned long) hose->io_base_virt); |
| |
| if (primary) |
| pci_io_base = (unsigned long)hose->io_base_virt; |
| |
| io_virt_offset = (unsigned long)hose->io_base_virt - pci_io_base; |
| res = &hose->io_resource; |
| res->start += io_virt_offset; |
| res->end += io_virt_offset; |
| } |
| |
| |
| static int get_bus_io_range(struct pci_bus *bus, unsigned long *start_phys, |
| unsigned long *start_virt, unsigned long *size) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| struct pci_bus_region region; |
| struct resource *res; |
| |
| if (bus->self) { |
| res = bus->resource[0]; |
| pcibios_resource_to_bus(bus->self, ®ion, res); |
| *start_phys = hose->io_base_phys + region.start; |
| *start_virt = (unsigned long) hose->io_base_virt + |
| region.start; |
| if (region.end > region.start) |
| *size = region.end - region.start + 1; |
| else { |
| printk("%s(): unexpected region 0x%lx->0x%lx\n", |
| __FUNCTION__, region.start, region.end); |
| return 1; |
| } |
| |
| } else { |
| /* Root Bus */ |
| res = &hose->io_resource; |
| *start_phys = hose->io_base_phys; |
| *start_virt = (unsigned long) hose->io_base_virt; |
| if (res->end > res->start) |
| *size = res->end - res->start + 1; |
| else { |
| printk("%s(): unexpected region 0x%lx->0x%lx\n", |
| __FUNCTION__, res->start, res->end); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int unmap_bus_range(struct pci_bus *bus) |
| { |
| unsigned long start_phys; |
| unsigned long start_virt; |
| unsigned long size; |
| |
| if (!bus) { |
| printk(KERN_ERR "%s() expected bus\n", __FUNCTION__); |
| return 1; |
| } |
| |
| if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) |
| return 1; |
| if (iounmap_explicit((void __iomem *) start_virt, size)) |
| return 1; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(unmap_bus_range); |
| |
| int remap_bus_range(struct pci_bus *bus) |
| { |
| unsigned long start_phys; |
| unsigned long start_virt; |
| unsigned long size; |
| |
| if (!bus) { |
| printk(KERN_ERR "%s() expected bus\n", __FUNCTION__); |
| return 1; |
| } |
| |
| |
| if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) |
| return 1; |
| printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); |
| if (__ioremap_explicit(start_phys, start_virt, size, |
| _PAGE_NO_CACHE | _PAGE_GUARDED)) |
| return 1; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(remap_bus_range); |
| |
| void phbs_remap_io(void) |
| { |
| struct pci_controller *hose, *tmp; |
| |
| list_for_each_entry_safe(hose, tmp, &hose_list, list_node) |
| remap_bus_range(hose->bus); |
| } |
| |
| /* |
| * ppc64 can have multifunction devices that do not respond to function 0. |
| * In this case we must scan all functions. |
| * XXX this can go now, we use the OF device tree in all the |
| * cases that caused problems. -- paulus |
| */ |
| int pcibios_scan_all_fns(struct pci_bus *bus, int devfn) |
| { |
| return 0; |
| } |
| |
| static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| unsigned long start, end, mask, offset; |
| |
| if (res->flags & IORESOURCE_IO) { |
| offset = (unsigned long)hose->io_base_virt - pci_io_base; |
| |
| start = res->start += offset; |
| end = res->end += offset; |
| |
| /* Need to allow IO access to pages that are in the |
| ISA range */ |
| if (start < MAX_ISA_PORT) { |
| if (end > MAX_ISA_PORT) |
| end = MAX_ISA_PORT; |
| |
| start >>= PAGE_SHIFT; |
| end >>= PAGE_SHIFT; |
| |
| /* get the range of pages for the map */ |
| mask = ((1 << (end+1)) - 1) ^ ((1 << start) - 1); |
| io_page_mask |= mask; |
| } |
| } else if (res->flags & IORESOURCE_MEM) { |
| res->start += hose->pci_mem_offset; |
| res->end += hose->pci_mem_offset; |
| } |
| } |
| |
| void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, |
| struct pci_bus *bus) |
| { |
| /* Update device resources. */ |
| int i; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) |
| if (dev->resource[i].flags) |
| fixup_resource(&dev->resource[i], dev); |
| } |
| EXPORT_SYMBOL(pcibios_fixup_device_resources); |
| |
| static void __devinit do_bus_setup(struct pci_bus *bus) |
| { |
| struct pci_dev *dev; |
| |
| ppc_md.iommu_bus_setup(bus); |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) |
| ppc_md.iommu_dev_setup(dev); |
| |
| if (ppc_md.irq_bus_setup) |
| ppc_md.irq_bus_setup(bus); |
| } |
| |
| void __devinit pcibios_fixup_bus(struct pci_bus *bus) |
| { |
| struct pci_dev *dev = bus->self; |
| |
| if (dev && pci_probe_only && |
| (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { |
| /* This is a subordinate bridge */ |
| |
| pci_read_bridge_bases(bus); |
| pcibios_fixup_device_resources(dev, bus); |
| } |
| |
| do_bus_setup(bus); |
| |
| if (!pci_probe_only) |
| return; |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) |
| if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) |
| pcibios_fixup_device_resources(dev, bus); |
| } |
| EXPORT_SYMBOL(pcibios_fixup_bus); |
| |
| /* |
| * Reads the interrupt pin to determine if interrupt is use by card. |
| * If the interrupt is used, then gets the interrupt line from the |
| * openfirmware and sets it in the pci_dev and pci_config line. |
| */ |
| int pci_read_irq_line(struct pci_dev *pci_dev) |
| { |
| u8 intpin; |
| struct device_node *node; |
| |
| pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &intpin); |
| if (intpin == 0) |
| return 0; |
| |
| node = pci_device_to_OF_node(pci_dev); |
| if (node == NULL) |
| return -1; |
| |
| if (node->n_intrs == 0) |
| return -1; |
| |
| pci_dev->irq = node->intrs[0].line; |
| |
| pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pci_read_irq_line); |
| |
| void pci_resource_to_user(const struct pci_dev *dev, int bar, |
| const struct resource *rsrc, |
| u64 *start, u64 *end) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| unsigned long offset = 0; |
| |
| if (hose == NULL) |
| return; |
| |
| if (rsrc->flags & IORESOURCE_IO) |
| offset = pci_io_base - (unsigned long)hose->io_base_virt + |
| hose->io_base_phys; |
| |
| *start = rsrc->start + offset; |
| *end = rsrc->end + offset; |
| } |
| |
| #endif /* CONFIG_PPC_MULTIPLATFORM */ |
| |
| |
| #define IOBASE_BRIDGE_NUMBER 0 |
| #define IOBASE_MEMORY 1 |
| #define IOBASE_IO 2 |
| #define IOBASE_ISA_IO 3 |
| #define IOBASE_ISA_MEM 4 |
| |
| long sys_pciconfig_iobase(long which, unsigned long in_bus, |
| unsigned long in_devfn) |
| { |
| struct pci_controller* hose; |
| struct list_head *ln; |
| struct pci_bus *bus = NULL; |
| struct device_node *hose_node; |
| |
| /* Argh ! Please forgive me for that hack, but that's the |
| * simplest way to get existing XFree to not lockup on some |
| * G5 machines... So when something asks for bus 0 io base |
| * (bus 0 is HT root), we return the AGP one instead. |
| */ |
| if (machine_is_compatible("MacRISC4")) |
| if (in_bus == 0) |
| in_bus = 0xf0; |
| |
| /* That syscall isn't quite compatible with PCI domains, but it's |
| * used on pre-domains setup. We return the first match |
| */ |
| |
| for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { |
| bus = pci_bus_b(ln); |
| if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate)) |
| break; |
| bus = NULL; |
| } |
| if (bus == NULL || bus->sysdata == NULL) |
| return -ENODEV; |
| |
| hose_node = (struct device_node *)bus->sysdata; |
| hose = PCI_DN(hose_node)->phb; |
| |
| switch (which) { |
| case IOBASE_BRIDGE_NUMBER: |
| return (long)hose->first_busno; |
| case IOBASE_MEMORY: |
| return (long)hose->pci_mem_offset; |
| case IOBASE_IO: |
| return (long)hose->io_base_phys; |
| case IOBASE_ISA_IO: |
| return (long)isa_io_base; |
| case IOBASE_ISA_MEM: |
| return -EINVAL; |
| } |
| |
| return -EOPNOTSUPP; |
| } |