| /* |
| * net/tipc/msg.c: TIPC message header routines |
| * |
| * Copyright (c) 2000-2006, 2014, Ericsson AB |
| * Copyright (c) 2005, 2010-2011, Wind River Systems |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <net/sock.h> |
| #include "core.h" |
| #include "msg.h" |
| #include "addr.h" |
| #include "name_table.h" |
| |
| #define MAX_FORWARD_SIZE 1024 |
| |
| static unsigned int align(unsigned int i) |
| { |
| return (i + 3) & ~3u; |
| } |
| |
| /** |
| * tipc_buf_acquire - creates a TIPC message buffer |
| * @size: message size (including TIPC header) |
| * |
| * Returns a new buffer with data pointers set to the specified size. |
| * |
| * NOTE: Headroom is reserved to allow prepending of a data link header. |
| * There may also be unrequested tailroom present at the buffer's end. |
| */ |
| struct sk_buff *tipc_buf_acquire(u32 size) |
| { |
| struct sk_buff *skb; |
| unsigned int buf_size = (BUF_HEADROOM + size + 3) & ~3u; |
| |
| skb = alloc_skb_fclone(buf_size, GFP_ATOMIC); |
| if (skb) { |
| skb_reserve(skb, BUF_HEADROOM); |
| skb_put(skb, size); |
| skb->next = NULL; |
| } |
| return skb; |
| } |
| |
| void tipc_msg_init(struct tipc_msg *m, u32 user, u32 type, u32 hsize, |
| u32 destnode) |
| { |
| memset(m, 0, hsize); |
| msg_set_version(m); |
| msg_set_user(m, user); |
| msg_set_hdr_sz(m, hsize); |
| msg_set_size(m, hsize); |
| msg_set_prevnode(m, tipc_own_addr); |
| msg_set_type(m, type); |
| if (hsize > SHORT_H_SIZE) { |
| msg_set_orignode(m, tipc_own_addr); |
| msg_set_destnode(m, destnode); |
| } |
| } |
| |
| struct sk_buff *tipc_msg_create(uint user, uint type, uint hdr_sz, |
| uint data_sz, u32 dnode, u32 onode, |
| u32 dport, u32 oport, int errcode) |
| { |
| struct tipc_msg *msg; |
| struct sk_buff *buf; |
| |
| buf = tipc_buf_acquire(hdr_sz + data_sz); |
| if (unlikely(!buf)) |
| return NULL; |
| |
| msg = buf_msg(buf); |
| tipc_msg_init(msg, user, type, hdr_sz, dnode); |
| msg_set_size(msg, hdr_sz + data_sz); |
| msg_set_prevnode(msg, onode); |
| msg_set_origport(msg, oport); |
| msg_set_destport(msg, dport); |
| msg_set_errcode(msg, errcode); |
| if (hdr_sz > SHORT_H_SIZE) { |
| msg_set_orignode(msg, onode); |
| msg_set_destnode(msg, dnode); |
| } |
| return buf; |
| } |
| |
| /* tipc_buf_append(): Append a buffer to the fragment list of another buffer |
| * @*headbuf: in: NULL for first frag, otherwise value returned from prev call |
| * out: set when successful non-complete reassembly, otherwise NULL |
| * @*buf: in: the buffer to append. Always defined |
| * out: head buf after successful complete reassembly, otherwise NULL |
| * Returns 1 when reassembly complete, otherwise 0 |
| */ |
| int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf) |
| { |
| struct sk_buff *head = *headbuf; |
| struct sk_buff *frag = *buf; |
| struct sk_buff *tail; |
| struct tipc_msg *msg; |
| u32 fragid; |
| int delta; |
| bool headstolen; |
| |
| if (!frag) |
| goto err; |
| |
| msg = buf_msg(frag); |
| fragid = msg_type(msg); |
| frag->next = NULL; |
| skb_pull(frag, msg_hdr_sz(msg)); |
| |
| if (fragid == FIRST_FRAGMENT) { |
| if (unlikely(head)) |
| goto err; |
| if (unlikely(skb_unclone(frag, GFP_ATOMIC))) |
| goto err; |
| head = *headbuf = frag; |
| skb_frag_list_init(head); |
| TIPC_SKB_CB(head)->tail = NULL; |
| *buf = NULL; |
| return 0; |
| } |
| |
| if (!head) |
| goto err; |
| |
| if (skb_try_coalesce(head, frag, &headstolen, &delta)) { |
| kfree_skb_partial(frag, headstolen); |
| } else { |
| tail = TIPC_SKB_CB(head)->tail; |
| if (!skb_has_frag_list(head)) |
| skb_shinfo(head)->frag_list = frag; |
| else |
| tail->next = frag; |
| head->truesize += frag->truesize; |
| head->data_len += frag->len; |
| head->len += frag->len; |
| TIPC_SKB_CB(head)->tail = frag; |
| } |
| |
| if (fragid == LAST_FRAGMENT) { |
| *buf = head; |
| TIPC_SKB_CB(head)->tail = NULL; |
| *headbuf = NULL; |
| return 1; |
| } |
| *buf = NULL; |
| return 0; |
| |
| err: |
| pr_warn_ratelimited("Unable to build fragment list\n"); |
| kfree_skb(*buf); |
| kfree_skb(*headbuf); |
| *buf = *headbuf = NULL; |
| return 0; |
| } |
| |
| |
| /** |
| * tipc_msg_build - create buffer chain containing specified header and data |
| * @mhdr: Message header, to be prepended to data |
| * @m: User message |
| * @offset: Posision in iov to start copying from |
| * @dsz: Total length of user data |
| * @pktmax: Max packet size that can be used |
| * @list: Buffer or chain of buffers to be returned to caller |
| * |
| * Returns message data size or errno: -ENOMEM, -EFAULT |
| */ |
| int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m, int offset, |
| int dsz, int pktmax, struct sk_buff_head *list) |
| { |
| int mhsz = msg_hdr_sz(mhdr); |
| int msz = mhsz + dsz; |
| int pktno = 1; |
| int pktsz; |
| int pktrem = pktmax; |
| int drem = dsz; |
| struct tipc_msg pkthdr; |
| struct sk_buff *skb; |
| char *pktpos; |
| int rc; |
| |
| msg_set_size(mhdr, msz); |
| |
| /* No fragmentation needed? */ |
| if (likely(msz <= pktmax)) { |
| skb = tipc_buf_acquire(msz); |
| if (unlikely(!skb)) |
| return -ENOMEM; |
| skb_orphan(skb); |
| __skb_queue_tail(list, skb); |
| skb_copy_to_linear_data(skb, mhdr, mhsz); |
| pktpos = skb->data + mhsz; |
| if (!dsz || !memcpy_fromiovecend(pktpos, m->msg_iter.iov, offset, |
| dsz)) |
| return dsz; |
| rc = -EFAULT; |
| goto error; |
| } |
| |
| /* Prepare reusable fragment header */ |
| tipc_msg_init(&pkthdr, MSG_FRAGMENTER, FIRST_FRAGMENT, |
| INT_H_SIZE, msg_destnode(mhdr)); |
| msg_set_size(&pkthdr, pktmax); |
| msg_set_fragm_no(&pkthdr, pktno); |
| |
| /* Prepare first fragment */ |
| skb = tipc_buf_acquire(pktmax); |
| if (!skb) |
| return -ENOMEM; |
| skb_orphan(skb); |
| __skb_queue_tail(list, skb); |
| pktpos = skb->data; |
| skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE); |
| pktpos += INT_H_SIZE; |
| pktrem -= INT_H_SIZE; |
| skb_copy_to_linear_data_offset(skb, INT_H_SIZE, mhdr, mhsz); |
| pktpos += mhsz; |
| pktrem -= mhsz; |
| |
| do { |
| if (drem < pktrem) |
| pktrem = drem; |
| |
| if (memcpy_fromiovecend(pktpos, m->msg_iter.iov, offset, pktrem)) { |
| rc = -EFAULT; |
| goto error; |
| } |
| drem -= pktrem; |
| offset += pktrem; |
| |
| if (!drem) |
| break; |
| |
| /* Prepare new fragment: */ |
| if (drem < (pktmax - INT_H_SIZE)) |
| pktsz = drem + INT_H_SIZE; |
| else |
| pktsz = pktmax; |
| skb = tipc_buf_acquire(pktsz); |
| if (!skb) { |
| rc = -ENOMEM; |
| goto error; |
| } |
| skb_orphan(skb); |
| __skb_queue_tail(list, skb); |
| msg_set_type(&pkthdr, FRAGMENT); |
| msg_set_size(&pkthdr, pktsz); |
| msg_set_fragm_no(&pkthdr, ++pktno); |
| skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE); |
| pktpos = skb->data + INT_H_SIZE; |
| pktrem = pktsz - INT_H_SIZE; |
| |
| } while (1); |
| msg_set_type(buf_msg(skb), LAST_FRAGMENT); |
| return dsz; |
| error: |
| __skb_queue_purge(list); |
| __skb_queue_head_init(list); |
| return rc; |
| } |
| |
| /** |
| * tipc_msg_bundle(): Append contents of a buffer to tail of an existing one |
| * @list: the buffer chain of the existing buffer ("bundle") |
| * @skb: buffer to be appended |
| * @mtu: max allowable size for the bundle buffer |
| * Consumes buffer if successful |
| * Returns true if bundling could be performed, otherwise false |
| */ |
| bool tipc_msg_bundle(struct sk_buff_head *list, struct sk_buff *skb, u32 mtu) |
| { |
| struct sk_buff *bskb = skb_peek_tail(list); |
| struct tipc_msg *bmsg = buf_msg(bskb); |
| struct tipc_msg *msg = buf_msg(skb); |
| unsigned int bsz = msg_size(bmsg); |
| unsigned int msz = msg_size(msg); |
| u32 start = align(bsz); |
| u32 max = mtu - INT_H_SIZE; |
| u32 pad = start - bsz; |
| |
| if (likely(msg_user(msg) == MSG_FRAGMENTER)) |
| return false; |
| if (unlikely(msg_user(msg) == CHANGEOVER_PROTOCOL)) |
| return false; |
| if (unlikely(msg_user(msg) == BCAST_PROTOCOL)) |
| return false; |
| if (likely(msg_user(bmsg) != MSG_BUNDLER)) |
| return false; |
| if (likely(!TIPC_SKB_CB(bskb)->bundling)) |
| return false; |
| if (unlikely(skb_tailroom(bskb) < (pad + msz))) |
| return false; |
| if (unlikely(max < (start + msz))) |
| return false; |
| |
| skb_put(bskb, pad + msz); |
| skb_copy_to_linear_data_offset(bskb, start, skb->data, msz); |
| msg_set_size(bmsg, start + msz); |
| msg_set_msgcnt(bmsg, msg_msgcnt(bmsg) + 1); |
| kfree_skb(skb); |
| return true; |
| } |
| |
| /** |
| * tipc_msg_make_bundle(): Create bundle buf and append message to its tail |
| * @list: the buffer chain |
| * @skb: buffer to be appended and replaced |
| * @mtu: max allowable size for the bundle buffer, inclusive header |
| * @dnode: destination node for message. (Not always present in header) |
| * Replaces buffer if successful |
| * Returns true if success, otherwise false |
| */ |
| bool tipc_msg_make_bundle(struct sk_buff_head *list, struct sk_buff *skb, |
| u32 mtu, u32 dnode) |
| { |
| struct sk_buff *bskb; |
| struct tipc_msg *bmsg; |
| struct tipc_msg *msg = buf_msg(skb); |
| u32 msz = msg_size(msg); |
| u32 max = mtu - INT_H_SIZE; |
| |
| if (msg_user(msg) == MSG_FRAGMENTER) |
| return false; |
| if (msg_user(msg) == CHANGEOVER_PROTOCOL) |
| return false; |
| if (msg_user(msg) == BCAST_PROTOCOL) |
| return false; |
| if (msz > (max / 2)) |
| return false; |
| |
| bskb = tipc_buf_acquire(max); |
| if (!bskb) |
| return false; |
| |
| skb_trim(bskb, INT_H_SIZE); |
| bmsg = buf_msg(bskb); |
| tipc_msg_init(bmsg, MSG_BUNDLER, 0, INT_H_SIZE, dnode); |
| msg_set_seqno(bmsg, msg_seqno(msg)); |
| msg_set_ack(bmsg, msg_ack(msg)); |
| msg_set_bcast_ack(bmsg, msg_bcast_ack(msg)); |
| TIPC_SKB_CB(bskb)->bundling = true; |
| __skb_queue_tail(list, bskb); |
| return tipc_msg_bundle(list, skb, mtu); |
| } |
| |
| /** |
| * tipc_msg_reverse(): swap source and destination addresses and add error code |
| * @buf: buffer containing message to be reversed |
| * @dnode: return value: node where to send message after reversal |
| * @err: error code to be set in message |
| * Consumes buffer if failure |
| * Returns true if success, otherwise false |
| */ |
| bool tipc_msg_reverse(struct sk_buff *buf, u32 *dnode, int err) |
| { |
| struct tipc_msg *msg = buf_msg(buf); |
| uint imp = msg_importance(msg); |
| struct tipc_msg ohdr; |
| uint rdsz = min_t(uint, msg_data_sz(msg), MAX_FORWARD_SIZE); |
| |
| if (skb_linearize(buf)) |
| goto exit; |
| if (msg_dest_droppable(msg)) |
| goto exit; |
| if (msg_errcode(msg)) |
| goto exit; |
| |
| memcpy(&ohdr, msg, msg_hdr_sz(msg)); |
| imp = min_t(uint, imp + 1, TIPC_CRITICAL_IMPORTANCE); |
| if (msg_isdata(msg)) |
| msg_set_importance(msg, imp); |
| msg_set_errcode(msg, err); |
| msg_set_origport(msg, msg_destport(&ohdr)); |
| msg_set_destport(msg, msg_origport(&ohdr)); |
| msg_set_prevnode(msg, tipc_own_addr); |
| if (!msg_short(msg)) { |
| msg_set_orignode(msg, msg_destnode(&ohdr)); |
| msg_set_destnode(msg, msg_orignode(&ohdr)); |
| } |
| msg_set_size(msg, msg_hdr_sz(msg) + rdsz); |
| skb_trim(buf, msg_size(msg)); |
| skb_orphan(buf); |
| *dnode = msg_orignode(&ohdr); |
| return true; |
| exit: |
| kfree_skb(buf); |
| return false; |
| } |
| |
| /** |
| * tipc_msg_eval: determine fate of message that found no destination |
| * @buf: the buffer containing the message. |
| * @dnode: return value: next-hop node, if message to be forwarded |
| * @err: error code to use, if message to be rejected |
| * |
| * Does not consume buffer |
| * Returns 0 (TIPC_OK) if message ok and we can try again, -TIPC error |
| * code if message to be rejected |
| */ |
| int tipc_msg_eval(struct sk_buff *buf, u32 *dnode) |
| { |
| struct tipc_msg *msg = buf_msg(buf); |
| u32 dport; |
| |
| if (msg_type(msg) != TIPC_NAMED_MSG) |
| return -TIPC_ERR_NO_PORT; |
| if (skb_linearize(buf)) |
| return -TIPC_ERR_NO_NAME; |
| if (msg_data_sz(msg) > MAX_FORWARD_SIZE) |
| return -TIPC_ERR_NO_NAME; |
| if (msg_reroute_cnt(msg) > 0) |
| return -TIPC_ERR_NO_NAME; |
| |
| *dnode = addr_domain(msg_lookup_scope(msg)); |
| dport = tipc_nametbl_translate(msg_nametype(msg), |
| msg_nameinst(msg), |
| dnode); |
| if (!dport) |
| return -TIPC_ERR_NO_NAME; |
| msg_incr_reroute_cnt(msg); |
| msg_set_destnode(msg, *dnode); |
| msg_set_destport(msg, dport); |
| return TIPC_OK; |
| } |
| |
| /* tipc_msg_reassemble() - clone a buffer chain of fragments and |
| * reassemble the clones into one message |
| */ |
| struct sk_buff *tipc_msg_reassemble(struct sk_buff_head *list) |
| { |
| struct sk_buff *skb; |
| struct sk_buff *frag = NULL; |
| struct sk_buff *head = NULL; |
| int hdr_sz; |
| |
| /* Copy header if single buffer */ |
| if (skb_queue_len(list) == 1) { |
| skb = skb_peek(list); |
| hdr_sz = skb_headroom(skb) + msg_hdr_sz(buf_msg(skb)); |
| return __pskb_copy(skb, hdr_sz, GFP_ATOMIC); |
| } |
| |
| /* Clone all fragments and reassemble */ |
| skb_queue_walk(list, skb) { |
| frag = skb_clone(skb, GFP_ATOMIC); |
| if (!frag) |
| goto error; |
| frag->next = NULL; |
| if (tipc_buf_append(&head, &frag)) |
| break; |
| if (!head) |
| goto error; |
| } |
| return frag; |
| error: |
| pr_warn("Failed do clone local mcast rcv buffer\n"); |
| kfree_skb(head); |
| return NULL; |
| } |