| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| *****************************************************************************/ |
| |
| #ifndef __fw_api_rs_h__ |
| #define __fw_api_rs_h__ |
| |
| #include "fw-api-mac.h" |
| |
| /* |
| * These serve as indexes into |
| * struct iwl_rate_info fw_rate_idx_to_plcp[IWL_RATE_COUNT]; |
| */ |
| enum { |
| IWL_RATE_1M_INDEX = 0, |
| IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, |
| IWL_RATE_2M_INDEX, |
| IWL_RATE_5M_INDEX, |
| IWL_RATE_11M_INDEX, |
| IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, |
| IWL_RATE_6M_INDEX, |
| IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, |
| IWL_RATE_9M_INDEX, |
| IWL_RATE_12M_INDEX, |
| IWL_RATE_18M_INDEX, |
| IWL_RATE_24M_INDEX, |
| IWL_RATE_36M_INDEX, |
| IWL_RATE_48M_INDEX, |
| IWL_RATE_54M_INDEX, |
| IWL_LAST_NON_HT_RATE = IWL_RATE_54M_INDEX, |
| IWL_RATE_60M_INDEX, |
| IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, |
| IWL_RATE_COUNT_LEGACY = IWL_LAST_NON_HT_RATE + 1, |
| IWL_RATE_COUNT, |
| }; |
| |
| #define IWL_RATE_BIT_MSK(r) BIT(IWL_RATE_##r##M_INDEX) |
| |
| /* fw API values for legacy bit rates, both OFDM and CCK */ |
| enum { |
| IWL_RATE_6M_PLCP = 13, |
| IWL_RATE_9M_PLCP = 15, |
| IWL_RATE_12M_PLCP = 5, |
| IWL_RATE_18M_PLCP = 7, |
| IWL_RATE_24M_PLCP = 9, |
| IWL_RATE_36M_PLCP = 11, |
| IWL_RATE_48M_PLCP = 1, |
| IWL_RATE_54M_PLCP = 3, |
| IWL_RATE_1M_PLCP = 10, |
| IWL_RATE_2M_PLCP = 20, |
| IWL_RATE_5M_PLCP = 55, |
| IWL_RATE_11M_PLCP = 110, |
| }; |
| |
| /* |
| * rate_n_flags bit fields |
| * |
| * The 32-bit value has different layouts in the low 8 bites depending on the |
| * format. There are three formats, HT, VHT and legacy (11abg, with subformats |
| * for CCK and OFDM). |
| * |
| * High-throughput (HT) rate format |
| * bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM) |
| * Very High-throughput (VHT) rate format |
| * bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM) |
| * Legacy OFDM rate format for bits 7:0 |
| * bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM) |
| * Legacy CCK rate format for bits 7:0: |
| * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK) |
| */ |
| |
| /* Bit 8: (1) HT format, (0) legacy or VHT format */ |
| #define RATE_MCS_HT_POS 8 |
| #define RATE_MCS_HT_MSK (1 << RATE_MCS_HT_POS) |
| |
| /* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ |
| #define RATE_MCS_CCK_POS 9 |
| #define RATE_MCS_CCK_MSK (1 << RATE_MCS_CCK_POS) |
| |
| /* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */ |
| #define RATE_MCS_VHT_POS 26 |
| #define RATE_MCS_VHT_MSK (1 << RATE_MCS_VHT_POS) |
| |
| |
| /* |
| * High-throughput (HT) rate format for bits 7:0 |
| * |
| * 2-0: MCS rate base |
| * 0) 6 Mbps |
| * 1) 12 Mbps |
| * 2) 18 Mbps |
| * 3) 24 Mbps |
| * 4) 36 Mbps |
| * 5) 48 Mbps |
| * 6) 54 Mbps |
| * 7) 60 Mbps |
| * 4-3: 0) Single stream (SISO) |
| * 1) Dual stream (MIMO) |
| * 2) Triple stream (MIMO) |
| * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data |
| * (bits 7-6 are zero) |
| * |
| * Together the low 5 bits work out to the MCS index because we don't |
| * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two |
| * streams and 16-23 have three streams. We could also support MCS 32 |
| * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.) |
| */ |
| #define RATE_HT_MCS_RATE_CODE_MSK 0x7 |
| |
| /* Bit 10: (1) Use Green Field preamble */ |
| #define RATE_HT_MCS_GF_POS 10 |
| #define RATE_HT_MCS_GF_MSK (1 << RATE_HT_MCS_GF_POS) |
| |
| #define RATE_HT_MCS_INDEX_MSK 0x3f |
| |
| /* |
| * Very High-throughput (VHT) rate format for bits 7:0 |
| * |
| * 3-0: VHT MCS (0-9) |
| * 5-4: number of streams - 1: |
| * 0) Single stream (SISO) |
| * 1) Dual stream (MIMO) |
| * 2) Triple stream (MIMO) |
| */ |
| |
| /* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */ |
| #define RATE_VHT_MCS_RATE_CODE_MSK 0xf |
| #define RATE_VHT_MCS_NSS_POS 4 |
| #define RATE_VHT_MCS_NSS_MSK (3 << RATE_VHT_MCS_NSS_POS) |
| |
| /* |
| * Legacy OFDM rate format for bits 7:0 |
| * |
| * 3-0: 0xD) 6 Mbps |
| * 0xF) 9 Mbps |
| * 0x5) 12 Mbps |
| * 0x7) 18 Mbps |
| * 0x9) 24 Mbps |
| * 0xB) 36 Mbps |
| * 0x1) 48 Mbps |
| * 0x3) 54 Mbps |
| * (bits 7-4 are 0) |
| * |
| * Legacy CCK rate format for bits 7:0: |
| * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK): |
| * |
| * 6-0: 10) 1 Mbps |
| * 20) 2 Mbps |
| * 55) 5.5 Mbps |
| * 110) 11 Mbps |
| * (bit 7 is 0) |
| */ |
| #define RATE_LEGACY_RATE_MSK 0xff |
| |
| |
| /* |
| * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz |
| * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT |
| */ |
| #define RATE_MCS_CHAN_WIDTH_POS 11 |
| #define RATE_MCS_CHAN_WIDTH_MSK (3 << RATE_MCS_CHAN_WIDTH_POS) |
| #define RATE_MCS_CHAN_WIDTH_20 (0 << RATE_MCS_CHAN_WIDTH_POS) |
| #define RATE_MCS_CHAN_WIDTH_40 (1 << RATE_MCS_CHAN_WIDTH_POS) |
| #define RATE_MCS_CHAN_WIDTH_80 (2 << RATE_MCS_CHAN_WIDTH_POS) |
| #define RATE_MCS_CHAN_WIDTH_160 (3 << RATE_MCS_CHAN_WIDTH_POS) |
| |
| /* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ |
| #define RATE_MCS_SGI_POS 13 |
| #define RATE_MCS_SGI_MSK (1 << RATE_MCS_SGI_POS) |
| |
| /* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */ |
| #define RATE_MCS_ANT_POS 14 |
| #define RATE_MCS_ANT_A_MSK (1 << RATE_MCS_ANT_POS) |
| #define RATE_MCS_ANT_B_MSK (2 << RATE_MCS_ANT_POS) |
| #define RATE_MCS_ANT_C_MSK (4 << RATE_MCS_ANT_POS) |
| #define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | \ |
| RATE_MCS_ANT_B_MSK) |
| #define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | \ |
| RATE_MCS_ANT_C_MSK) |
| #define RATE_MCS_ANT_MSK RATE_MCS_ANT_ABC_MSK |
| #define RATE_MCS_ANT_NUM 3 |
| |
| /* Bit 17-18: (0) SS, (1) SS*2 */ |
| #define RATE_MCS_STBC_POS 17 |
| #define RATE_MCS_STBC_MSK (1 << RATE_MCS_STBC_POS) |
| |
| /* Bit 19: (0) Beamforming is off, (1) Beamforming is on */ |
| #define RATE_MCS_BF_POS 19 |
| #define RATE_MCS_BF_MSK (1 << RATE_MCS_BF_POS) |
| |
| /* Bit 20: (0) ZLF is off, (1) ZLF is on */ |
| #define RATE_MCS_ZLF_POS 20 |
| #define RATE_MCS_ZLF_MSK (1 << RATE_MCS_ZLF_POS) |
| |
| /* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */ |
| #define RATE_MCS_DUP_POS 24 |
| #define RATE_MCS_DUP_MSK (3 << RATE_MCS_DUP_POS) |
| |
| /* Bit 27: (1) LDPC enabled, (0) LDPC disabled */ |
| #define RATE_MCS_LDPC_POS 27 |
| #define RATE_MCS_LDPC_MSK (1 << RATE_MCS_LDPC_POS) |
| |
| |
| /* Link Quality definitions */ |
| |
| /* # entries in rate scale table to support Tx retries */ |
| #define LQ_MAX_RETRY_NUM 16 |
| |
| /* Link quality command flags, only this one is available */ |
| #define LQ_FLAG_SET_STA_TLC_RTS_MSK BIT(0) |
| |
| /** |
| * struct iwl_lq_cmd - link quality command |
| * @sta_id: station to update |
| * @control: not used |
| * @flags: combination of LQ_FLAG_* |
| * @mimo_delim: the first SISO index in rs_table, which separates MIMO |
| * and SISO rates |
| * @single_stream_ant_msk: best antenna for SISO (can be dual in CDD). |
| * Should be ANT_[ABC] |
| * @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC] |
| * @initial_rate_index: first index from rs_table per AC category |
| * @agg_time_limit: aggregation max time threshold in usec/100, meaning |
| * value of 100 is one usec. Range is 100 to 8000 |
| * @agg_disable_start_th: try-count threshold for starting aggregation. |
| * If a frame has higher try-count, it should not be selected for |
| * starting an aggregation sequence. |
| * @agg_frame_cnt_limit: max frame count in an aggregation. |
| * 0: no limit |
| * 1: no aggregation (one frame per aggregation) |
| * 2 - 0x3f: maximal number of frames (up to 3f == 63) |
| * @rs_table: array of rates for each TX try, each is rate_n_flags, |
| * meaning it is a combination of RATE_MCS_* and IWL_RATE_*_PLCP |
| * @bf_params: beam forming params, currently not used |
| */ |
| struct iwl_lq_cmd { |
| u8 sta_id; |
| u8 reserved1; |
| u16 control; |
| /* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */ |
| u8 flags; |
| u8 mimo_delim; |
| u8 single_stream_ant_msk; |
| u8 dual_stream_ant_msk; |
| u8 initial_rate_index[AC_NUM]; |
| /* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */ |
| __le16 agg_time_limit; |
| u8 agg_disable_start_th; |
| u8 agg_frame_cnt_limit; |
| __le32 reserved2; |
| __le32 rs_table[LQ_MAX_RETRY_NUM]; |
| __le32 bf_params; |
| }; /* LINK_QUALITY_CMD_API_S_VER_1 */ |
| #endif /* __fw_api_rs_h__ */ |