| /* linux/arch/arm/mach-exynos4/mct.c |
| * |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * EXYNOS4 MCT(Multi-Core Timer) support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/clockchips.h> |
| #include <linux/cpu.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/percpu.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_address.h> |
| #include <linux/clocksource.h> |
| #include <linux/sched_clock.h> |
| |
| #define EXYNOS4_MCTREG(x) (x) |
| #define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) |
| #define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104) |
| #define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110) |
| #define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200) |
| #define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204) |
| #define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208) |
| #define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240) |
| #define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244) |
| #define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) |
| #define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) |
| #define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300) |
| #define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x)) |
| #define EXYNOS4_MCT_L_MASK (0xffffff00) |
| |
| #define MCT_L_TCNTB_OFFSET (0x00) |
| #define MCT_L_ICNTB_OFFSET (0x08) |
| #define MCT_L_TCON_OFFSET (0x20) |
| #define MCT_L_INT_CSTAT_OFFSET (0x30) |
| #define MCT_L_INT_ENB_OFFSET (0x34) |
| #define MCT_L_WSTAT_OFFSET (0x40) |
| #define MCT_G_TCON_START (1 << 8) |
| #define MCT_G_TCON_COMP0_AUTO_INC (1 << 1) |
| #define MCT_G_TCON_COMP0_ENABLE (1 << 0) |
| #define MCT_L_TCON_INTERVAL_MODE (1 << 2) |
| #define MCT_L_TCON_INT_START (1 << 1) |
| #define MCT_L_TCON_TIMER_START (1 << 0) |
| |
| #define TICK_BASE_CNT 1 |
| |
| enum { |
| MCT_INT_SPI, |
| MCT_INT_PPI |
| }; |
| |
| enum { |
| MCT_G0_IRQ, |
| MCT_G1_IRQ, |
| MCT_G2_IRQ, |
| MCT_G3_IRQ, |
| MCT_L0_IRQ, |
| MCT_L1_IRQ, |
| MCT_L2_IRQ, |
| MCT_L3_IRQ, |
| MCT_L4_IRQ, |
| MCT_L5_IRQ, |
| MCT_L6_IRQ, |
| MCT_L7_IRQ, |
| MCT_NR_IRQS, |
| }; |
| |
| static void __iomem *reg_base; |
| static unsigned long clk_rate; |
| static unsigned int mct_int_type; |
| static int mct_irqs[MCT_NR_IRQS]; |
| |
| struct mct_clock_event_device { |
| struct clock_event_device evt; |
| unsigned long base; |
| char name[10]; |
| }; |
| |
| static void exynos4_mct_write(unsigned int value, unsigned long offset) |
| { |
| unsigned long stat_addr; |
| u32 mask; |
| u32 i; |
| |
| writel_relaxed(value, reg_base + offset); |
| |
| if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) { |
| stat_addr = (offset & EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET; |
| switch (offset & ~EXYNOS4_MCT_L_MASK) { |
| case MCT_L_TCON_OFFSET: |
| mask = 1 << 3; /* L_TCON write status */ |
| break; |
| case MCT_L_ICNTB_OFFSET: |
| mask = 1 << 1; /* L_ICNTB write status */ |
| break; |
| case MCT_L_TCNTB_OFFSET: |
| mask = 1 << 0; /* L_TCNTB write status */ |
| break; |
| default: |
| return; |
| } |
| } else { |
| switch (offset) { |
| case EXYNOS4_MCT_G_TCON: |
| stat_addr = EXYNOS4_MCT_G_WSTAT; |
| mask = 1 << 16; /* G_TCON write status */ |
| break; |
| case EXYNOS4_MCT_G_COMP0_L: |
| stat_addr = EXYNOS4_MCT_G_WSTAT; |
| mask = 1 << 0; /* G_COMP0_L write status */ |
| break; |
| case EXYNOS4_MCT_G_COMP0_U: |
| stat_addr = EXYNOS4_MCT_G_WSTAT; |
| mask = 1 << 1; /* G_COMP0_U write status */ |
| break; |
| case EXYNOS4_MCT_G_COMP0_ADD_INCR: |
| stat_addr = EXYNOS4_MCT_G_WSTAT; |
| mask = 1 << 2; /* G_COMP0_ADD_INCR w status */ |
| break; |
| case EXYNOS4_MCT_G_CNT_L: |
| stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; |
| mask = 1 << 0; /* G_CNT_L write status */ |
| break; |
| case EXYNOS4_MCT_G_CNT_U: |
| stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; |
| mask = 1 << 1; /* G_CNT_U write status */ |
| break; |
| default: |
| return; |
| } |
| } |
| |
| /* Wait maximum 1 ms until written values are applied */ |
| for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++) |
| if (readl_relaxed(reg_base + stat_addr) & mask) { |
| writel_relaxed(mask, reg_base + stat_addr); |
| return; |
| } |
| |
| panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset); |
| } |
| |
| /* Clocksource handling */ |
| static void exynos4_mct_frc_start(void) |
| { |
| u32 reg; |
| |
| reg = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON); |
| reg |= MCT_G_TCON_START; |
| exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); |
| } |
| |
| /** |
| * exynos4_read_count_64 - Read all 64-bits of the global counter |
| * |
| * This will read all 64-bits of the global counter taking care to make sure |
| * that the upper and lower half match. Note that reading the MCT can be quite |
| * slow (hundreds of nanoseconds) so you should use the 32-bit (lower half |
| * only) version when possible. |
| * |
| * Returns the number of cycles in the global counter. |
| */ |
| static u64 exynos4_read_count_64(void) |
| { |
| unsigned int lo, hi; |
| u32 hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U); |
| |
| do { |
| hi = hi2; |
| lo = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L); |
| hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U); |
| } while (hi != hi2); |
| |
| return ((cycle_t)hi << 32) | lo; |
| } |
| |
| /** |
| * exynos4_read_count_32 - Read the lower 32-bits of the global counter |
| * |
| * This will read just the lower 32-bits of the global counter. This is marked |
| * as notrace so it can be used by the scheduler clock. |
| * |
| * Returns the number of cycles in the global counter (lower 32 bits). |
| */ |
| static u32 notrace exynos4_read_count_32(void) |
| { |
| return readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L); |
| } |
| |
| static cycle_t exynos4_frc_read(struct clocksource *cs) |
| { |
| return exynos4_read_count_32(); |
| } |
| |
| static void exynos4_frc_resume(struct clocksource *cs) |
| { |
| exynos4_mct_frc_start(); |
| } |
| |
| static struct clocksource mct_frc = { |
| .name = "mct-frc", |
| .rating = 400, |
| .read = exynos4_frc_read, |
| .mask = CLOCKSOURCE_MASK(32), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| .resume = exynos4_frc_resume, |
| }; |
| |
| static u64 notrace exynos4_read_sched_clock(void) |
| { |
| return exynos4_read_count_32(); |
| } |
| |
| static struct delay_timer exynos4_delay_timer; |
| |
| static cycles_t exynos4_read_current_timer(void) |
| { |
| BUILD_BUG_ON_MSG(sizeof(cycles_t) != sizeof(u32), |
| "cycles_t needs to move to 32-bit for ARM64 usage"); |
| return exynos4_read_count_32(); |
| } |
| |
| static void __init exynos4_clocksource_init(void) |
| { |
| exynos4_mct_frc_start(); |
| |
| exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer; |
| exynos4_delay_timer.freq = clk_rate; |
| register_current_timer_delay(&exynos4_delay_timer); |
| |
| if (clocksource_register_hz(&mct_frc, clk_rate)) |
| panic("%s: can't register clocksource\n", mct_frc.name); |
| |
| sched_clock_register(exynos4_read_sched_clock, 32, clk_rate); |
| } |
| |
| static void exynos4_mct_comp0_stop(void) |
| { |
| unsigned int tcon; |
| |
| tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON); |
| tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC); |
| |
| exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON); |
| exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB); |
| } |
| |
| static void exynos4_mct_comp0_start(enum clock_event_mode mode, |
| unsigned long cycles) |
| { |
| unsigned int tcon; |
| cycle_t comp_cycle; |
| |
| tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON); |
| |
| if (mode == CLOCK_EVT_MODE_PERIODIC) { |
| tcon |= MCT_G_TCON_COMP0_AUTO_INC; |
| exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR); |
| } |
| |
| comp_cycle = exynos4_read_count_64() + cycles; |
| exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L); |
| exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U); |
| |
| exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB); |
| |
| tcon |= MCT_G_TCON_COMP0_ENABLE; |
| exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON); |
| } |
| |
| static int exynos4_comp_set_next_event(unsigned long cycles, |
| struct clock_event_device *evt) |
| { |
| exynos4_mct_comp0_start(evt->mode, cycles); |
| |
| return 0; |
| } |
| |
| static void exynos4_comp_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| unsigned long cycles_per_jiffy; |
| exynos4_mct_comp0_stop(); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| cycles_per_jiffy = |
| (((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift); |
| exynos4_mct_comp0_start(mode, cycles_per_jiffy); |
| break; |
| |
| case CLOCK_EVT_MODE_ONESHOT: |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_RESUME: |
| break; |
| } |
| } |
| |
| static struct clock_event_device mct_comp_device = { |
| .name = "mct-comp", |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| .rating = 250, |
| .set_next_event = exynos4_comp_set_next_event, |
| .set_mode = exynos4_comp_set_mode, |
| }; |
| |
| static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = dev_id; |
| |
| exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT); |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction mct_comp_event_irq = { |
| .name = "mct_comp_irq", |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = exynos4_mct_comp_isr, |
| .dev_id = &mct_comp_device, |
| }; |
| |
| static void exynos4_clockevent_init(void) |
| { |
| mct_comp_device.cpumask = cpumask_of(0); |
| clockevents_config_and_register(&mct_comp_device, clk_rate, |
| 0xf, 0xffffffff); |
| setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq); |
| } |
| |
| static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); |
| |
| /* Clock event handling */ |
| static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) |
| { |
| unsigned long tmp; |
| unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START; |
| unsigned long offset = mevt->base + MCT_L_TCON_OFFSET; |
| |
| tmp = readl_relaxed(reg_base + offset); |
| if (tmp & mask) { |
| tmp &= ~mask; |
| exynos4_mct_write(tmp, offset); |
| } |
| } |
| |
| static void exynos4_mct_tick_start(unsigned long cycles, |
| struct mct_clock_event_device *mevt) |
| { |
| unsigned long tmp; |
| |
| exynos4_mct_tick_stop(mevt); |
| |
| tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */ |
| |
| /* update interrupt count buffer */ |
| exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET); |
| |
| /* enable MCT tick interrupt */ |
| exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); |
| |
| tmp = readl_relaxed(reg_base + mevt->base + MCT_L_TCON_OFFSET); |
| tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START | |
| MCT_L_TCON_INTERVAL_MODE; |
| exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET); |
| } |
| |
| static int exynos4_tick_set_next_event(unsigned long cycles, |
| struct clock_event_device *evt) |
| { |
| struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick); |
| |
| exynos4_mct_tick_start(cycles, mevt); |
| |
| return 0; |
| } |
| |
| static inline void exynos4_tick_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick); |
| unsigned long cycles_per_jiffy; |
| |
| exynos4_mct_tick_stop(mevt); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| cycles_per_jiffy = |
| (((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift); |
| exynos4_mct_tick_start(cycles_per_jiffy, mevt); |
| break; |
| |
| case CLOCK_EVT_MODE_ONESHOT: |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_RESUME: |
| break; |
| } |
| } |
| |
| static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) |
| { |
| struct clock_event_device *evt = &mevt->evt; |
| |
| /* |
| * This is for supporting oneshot mode. |
| * Mct would generate interrupt periodically |
| * without explicit stopping. |
| */ |
| if (evt->mode != CLOCK_EVT_MODE_PERIODIC) |
| exynos4_mct_tick_stop(mevt); |
| |
| /* Clear the MCT tick interrupt */ |
| if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) |
| exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); |
| } |
| |
| static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) |
| { |
| struct mct_clock_event_device *mevt = dev_id; |
| struct clock_event_device *evt = &mevt->evt; |
| |
| exynos4_mct_tick_clear(mevt); |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int exynos4_local_timer_setup(struct clock_event_device *evt) |
| { |
| struct mct_clock_event_device *mevt; |
| unsigned int cpu = smp_processor_id(); |
| |
| mevt = container_of(evt, struct mct_clock_event_device, evt); |
| |
| mevt->base = EXYNOS4_MCT_L_BASE(cpu); |
| snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu); |
| |
| evt->name = mevt->name; |
| evt->cpumask = cpumask_of(cpu); |
| evt->set_next_event = exynos4_tick_set_next_event; |
| evt->set_mode = exynos4_tick_set_mode; |
| evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; |
| evt->rating = 450; |
| |
| exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET); |
| |
| if (mct_int_type == MCT_INT_SPI) { |
| evt->irq = mct_irqs[MCT_L0_IRQ + cpu]; |
| if (request_irq(evt->irq, exynos4_mct_tick_isr, |
| IRQF_TIMER | IRQF_NOBALANCING, |
| evt->name, mevt)) { |
| pr_err("exynos-mct: cannot register IRQ %d\n", |
| evt->irq); |
| return -EIO; |
| } |
| irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu)); |
| } else { |
| enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0); |
| } |
| clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1), |
| 0xf, 0x7fffffff); |
| |
| return 0; |
| } |
| |
| static void exynos4_local_timer_stop(struct clock_event_device *evt) |
| { |
| evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); |
| if (mct_int_type == MCT_INT_SPI) |
| free_irq(evt->irq, this_cpu_ptr(&percpu_mct_tick)); |
| else |
| disable_percpu_irq(mct_irqs[MCT_L0_IRQ]); |
| } |
| |
| static int exynos4_mct_cpu_notify(struct notifier_block *self, |
| unsigned long action, void *hcpu) |
| { |
| struct mct_clock_event_device *mevt; |
| |
| /* |
| * Grab cpu pointer in each case to avoid spurious |
| * preemptible warnings |
| */ |
| switch (action & ~CPU_TASKS_FROZEN) { |
| case CPU_STARTING: |
| mevt = this_cpu_ptr(&percpu_mct_tick); |
| exynos4_local_timer_setup(&mevt->evt); |
| break; |
| case CPU_DYING: |
| mevt = this_cpu_ptr(&percpu_mct_tick); |
| exynos4_local_timer_stop(&mevt->evt); |
| break; |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block exynos4_mct_cpu_nb = { |
| .notifier_call = exynos4_mct_cpu_notify, |
| }; |
| |
| static void __init exynos4_timer_resources(struct device_node *np, void __iomem *base) |
| { |
| int err; |
| struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick); |
| struct clk *mct_clk, *tick_clk; |
| |
| tick_clk = np ? of_clk_get_by_name(np, "fin_pll") : |
| clk_get(NULL, "fin_pll"); |
| if (IS_ERR(tick_clk)) |
| panic("%s: unable to determine tick clock rate\n", __func__); |
| clk_rate = clk_get_rate(tick_clk); |
| |
| mct_clk = np ? of_clk_get_by_name(np, "mct") : clk_get(NULL, "mct"); |
| if (IS_ERR(mct_clk)) |
| panic("%s: unable to retrieve mct clock instance\n", __func__); |
| clk_prepare_enable(mct_clk); |
| |
| reg_base = base; |
| if (!reg_base) |
| panic("%s: unable to ioremap mct address space\n", __func__); |
| |
| if (mct_int_type == MCT_INT_PPI) { |
| |
| err = request_percpu_irq(mct_irqs[MCT_L0_IRQ], |
| exynos4_mct_tick_isr, "MCT", |
| &percpu_mct_tick); |
| WARN(err, "MCT: can't request IRQ %d (%d)\n", |
| mct_irqs[MCT_L0_IRQ], err); |
| } else { |
| irq_set_affinity(mct_irqs[MCT_L0_IRQ], cpumask_of(0)); |
| } |
| |
| err = register_cpu_notifier(&exynos4_mct_cpu_nb); |
| if (err) |
| goto out_irq; |
| |
| /* Immediately configure the timer on the boot CPU */ |
| exynos4_local_timer_setup(&mevt->evt); |
| return; |
| |
| out_irq: |
| free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick); |
| } |
| |
| static void __init mct_init_dt(struct device_node *np, unsigned int int_type) |
| { |
| u32 nr_irqs, i; |
| |
| mct_int_type = int_type; |
| |
| /* This driver uses only one global timer interrupt */ |
| mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ); |
| |
| /* |
| * Find out the number of local irqs specified. The local |
| * timer irqs are specified after the four global timer |
| * irqs are specified. |
| */ |
| #ifdef CONFIG_OF |
| nr_irqs = of_irq_count(np); |
| #else |
| nr_irqs = 0; |
| #endif |
| for (i = MCT_L0_IRQ; i < nr_irqs; i++) |
| mct_irqs[i] = irq_of_parse_and_map(np, i); |
| |
| exynos4_timer_resources(np, of_iomap(np, 0)); |
| exynos4_clocksource_init(); |
| exynos4_clockevent_init(); |
| } |
| |
| |
| static void __init mct_init_spi(struct device_node *np) |
| { |
| return mct_init_dt(np, MCT_INT_SPI); |
| } |
| |
| static void __init mct_init_ppi(struct device_node *np) |
| { |
| return mct_init_dt(np, MCT_INT_PPI); |
| } |
| CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi); |
| CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi); |