| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. |
| * Copyright (C) 2001 Ralf Baechle |
| * Copyright (C) 2013 Imagination Technologies Ltd. |
| * |
| * Routines for generic manipulation of the interrupts found on the MIPS |
| * Malta board. The interrupt controller is located in the South Bridge |
| * a PIIX4 device with two internal 82C95 interrupt controllers. |
| */ |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/irqchip.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/irqchip/mips-gic.h> |
| #include <linux/of_irq.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/kernel.h> |
| #include <linux/random.h> |
| |
| #include <asm/traps.h> |
| #include <asm/i8259.h> |
| #include <asm/irq_cpu.h> |
| #include <asm/irq_regs.h> |
| #include <asm/mips-cm.h> |
| #include <asm/mips-boards/malta.h> |
| #include <asm/mips-boards/maltaint.h> |
| #include <asm/gt64120.h> |
| #include <asm/mips-boards/generic.h> |
| #include <asm/mips-boards/msc01_pci.h> |
| #include <asm/msc01_ic.h> |
| #include <asm/setup.h> |
| #include <asm/rtlx.h> |
| |
| static inline int mips_pcibios_iack(void) |
| { |
| int irq; |
| |
| /* |
| * Determine highest priority pending interrupt by performing |
| * a PCI Interrupt Acknowledge cycle. |
| */ |
| switch (mips_revision_sconid) { |
| case MIPS_REVISION_SCON_SOCIT: |
| case MIPS_REVISION_SCON_ROCIT: |
| case MIPS_REVISION_SCON_SOCITSC: |
| case MIPS_REVISION_SCON_SOCITSCP: |
| MSC_READ(MSC01_PCI_IACK, irq); |
| irq &= 0xff; |
| break; |
| case MIPS_REVISION_SCON_GT64120: |
| irq = GT_READ(GT_PCI0_IACK_OFS); |
| irq &= 0xff; |
| break; |
| case MIPS_REVISION_SCON_BONITO: |
| /* The following will generate a PCI IACK cycle on the |
| * Bonito controller. It's a little bit kludgy, but it |
| * was the easiest way to implement it in hardware at |
| * the given time. |
| */ |
| BONITO_PCIMAP_CFG = 0x20000; |
| |
| /* Flush Bonito register block */ |
| (void) BONITO_PCIMAP_CFG; |
| iob(); /* sync */ |
| |
| irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg); |
| iob(); /* sync */ |
| irq &= 0xff; |
| BONITO_PCIMAP_CFG = 0; |
| break; |
| default: |
| pr_emerg("Unknown system controller.\n"); |
| return -1; |
| } |
| return irq; |
| } |
| |
| static void corehi_irqdispatch(void) |
| { |
| unsigned int intedge, intsteer, pcicmd, pcibadaddr; |
| unsigned int pcimstat, intisr, inten, intpol; |
| unsigned int intrcause, datalo, datahi; |
| struct pt_regs *regs = get_irq_regs(); |
| |
| pr_emerg("CoreHI interrupt, shouldn't happen, we die here!\n"); |
| pr_emerg("epc : %08lx\nStatus: %08lx\n" |
| "Cause : %08lx\nbadVaddr : %08lx\n", |
| regs->cp0_epc, regs->cp0_status, |
| regs->cp0_cause, regs->cp0_badvaddr); |
| |
| /* Read all the registers and then print them as there is a |
| problem with interspersed printk's upsetting the Bonito controller. |
| Do it for the others too. |
| */ |
| |
| switch (mips_revision_sconid) { |
| case MIPS_REVISION_SCON_SOCIT: |
| case MIPS_REVISION_SCON_ROCIT: |
| case MIPS_REVISION_SCON_SOCITSC: |
| case MIPS_REVISION_SCON_SOCITSCP: |
| ll_msc_irq(); |
| break; |
| case MIPS_REVISION_SCON_GT64120: |
| intrcause = GT_READ(GT_INTRCAUSE_OFS); |
| datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); |
| datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); |
| pr_emerg("GT_INTRCAUSE = %08x\n", intrcause); |
| pr_emerg("GT_CPUERR_ADDR = %02x%08x\n", |
| datahi, datalo); |
| break; |
| case MIPS_REVISION_SCON_BONITO: |
| pcibadaddr = BONITO_PCIBADADDR; |
| pcimstat = BONITO_PCIMSTAT; |
| intisr = BONITO_INTISR; |
| inten = BONITO_INTEN; |
| intpol = BONITO_INTPOL; |
| intedge = BONITO_INTEDGE; |
| intsteer = BONITO_INTSTEER; |
| pcicmd = BONITO_PCICMD; |
| pr_emerg("BONITO_INTISR = %08x\n", intisr); |
| pr_emerg("BONITO_INTEN = %08x\n", inten); |
| pr_emerg("BONITO_INTPOL = %08x\n", intpol); |
| pr_emerg("BONITO_INTEDGE = %08x\n", intedge); |
| pr_emerg("BONITO_INTSTEER = %08x\n", intsteer); |
| pr_emerg("BONITO_PCICMD = %08x\n", pcicmd); |
| pr_emerg("BONITO_PCIBADADDR = %08x\n", pcibadaddr); |
| pr_emerg("BONITO_PCIMSTAT = %08x\n", pcimstat); |
| break; |
| } |
| |
| die("CoreHi interrupt", regs); |
| } |
| |
| static irqreturn_t corehi_handler(int irq, void *dev_id) |
| { |
| corehi_irqdispatch(); |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_MIPS_MT_SMP |
| |
| #define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ |
| #define C_RESCHED C_SW0 |
| #define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */ |
| #define C_CALL C_SW1 |
| static int cpu_ipi_resched_irq, cpu_ipi_call_irq; |
| |
| static void ipi_resched_dispatch(void) |
| { |
| do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); |
| } |
| |
| static void ipi_call_dispatch(void) |
| { |
| do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); |
| } |
| |
| static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) |
| { |
| #ifdef CONFIG_MIPS_VPE_APSP_API_CMP |
| if (aprp_hook) |
| aprp_hook(); |
| #endif |
| |
| scheduler_ipi(); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) |
| { |
| generic_smp_call_function_interrupt(); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction irq_resched = { |
| .handler = ipi_resched_interrupt, |
| .flags = IRQF_PERCPU, |
| .name = "IPI_resched" |
| }; |
| |
| static struct irqaction irq_call = { |
| .handler = ipi_call_interrupt, |
| .flags = IRQF_PERCPU, |
| .name = "IPI_call" |
| }; |
| #endif /* CONFIG_MIPS_MT_SMP */ |
| |
| static struct irqaction corehi_irqaction = { |
| .handler = corehi_handler, |
| .name = "CoreHi", |
| .flags = IRQF_NO_THREAD, |
| }; |
| |
| static msc_irqmap_t msc_irqmap[] __initdata = { |
| {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, |
| {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, |
| }; |
| static int msc_nr_irqs __initdata = ARRAY_SIZE(msc_irqmap); |
| |
| static msc_irqmap_t msc_eicirqmap[] __initdata = { |
| {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, |
| {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} |
| }; |
| |
| static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap); |
| |
| void __init arch_init_ipiirq(int irq, struct irqaction *action) |
| { |
| setup_irq(irq, action); |
| irq_set_handler(irq, handle_percpu_irq); |
| } |
| |
| void __init arch_init_irq(void) |
| { |
| int corehi_irq; |
| |
| /* |
| * Preallocate the i8259's expected virq's here. Since irqchip_init() |
| * will probe the irqchips in hierarchial order, i8259 is probed last. |
| * If anything allocates a virq before the i8259 is probed, it will |
| * be given one of the i8259's expected range and consequently setup |
| * of the i8259 will fail. |
| */ |
| WARN(irq_alloc_descs(I8259A_IRQ_BASE, I8259A_IRQ_BASE, |
| 16, numa_node_id()) < 0, |
| "Cannot reserve i8259 virqs at IRQ%d\n", I8259A_IRQ_BASE); |
| |
| i8259_set_poll(mips_pcibios_iack); |
| irqchip_init(); |
| |
| switch (mips_revision_sconid) { |
| case MIPS_REVISION_SCON_SOCIT: |
| case MIPS_REVISION_SCON_ROCIT: |
| if (cpu_has_veic) |
| init_msc_irqs(MIPS_MSC01_IC_REG_BASE, |
| MSC01E_INT_BASE, msc_eicirqmap, |
| msc_nr_eicirqs); |
| else |
| init_msc_irqs(MIPS_MSC01_IC_REG_BASE, |
| MSC01C_INT_BASE, msc_irqmap, |
| msc_nr_irqs); |
| break; |
| |
| case MIPS_REVISION_SCON_SOCITSC: |
| case MIPS_REVISION_SCON_SOCITSCP: |
| if (cpu_has_veic) |
| init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, |
| MSC01E_INT_BASE, msc_eicirqmap, |
| msc_nr_eicirqs); |
| else |
| init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, |
| MSC01C_INT_BASE, msc_irqmap, |
| msc_nr_irqs); |
| } |
| |
| if (gic_present) { |
| corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI; |
| } else { |
| #if defined(CONFIG_MIPS_MT_SMP) |
| /* set up ipi interrupts */ |
| if (cpu_has_veic) { |
| set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch); |
| set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch); |
| cpu_ipi_resched_irq = MSC01E_INT_SW0; |
| cpu_ipi_call_irq = MSC01E_INT_SW1; |
| } else { |
| cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + |
| MIPS_CPU_IPI_RESCHED_IRQ; |
| cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + |
| MIPS_CPU_IPI_CALL_IRQ; |
| } |
| arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched); |
| arch_init_ipiirq(cpu_ipi_call_irq, &irq_call); |
| #endif |
| if (cpu_has_veic) { |
| set_vi_handler(MSC01E_INT_COREHI, |
| corehi_irqdispatch); |
| corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI; |
| } else { |
| corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI; |
| } |
| } |
| |
| setup_irq(corehi_irq, &corehi_irqaction); |
| } |