| /* |
| * Generic DPI Panels support |
| * |
| * Copyright (C) 2010 Canonical Ltd. |
| * Author: Bryan Wu <bryan.wu@canonical.com> |
| * |
| * LCD panel driver for Sharp LQ043T1DG01 |
| * |
| * Copyright (C) 2009 Texas Instruments Inc |
| * Author: Vaibhav Hiremath <hvaibhav@ti.com> |
| * |
| * LCD panel driver for Toppoly TDO35S |
| * |
| * Copyright (C) 2009 CompuLab, Ltd. |
| * Author: Mike Rapoport <mike@compulab.co.il> |
| * |
| * Copyright (C) 2008 Nokia Corporation |
| * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <video/omapdss.h> |
| |
| #include <video/omap-panel-generic-dpi.h> |
| |
| struct panel_config { |
| struct omap_video_timings timings; |
| |
| int power_on_delay; |
| int power_off_delay; |
| |
| /* |
| * Used to match device to panel configuration |
| * when use generic panel driver |
| */ |
| const char *name; |
| }; |
| |
| /* Panel configurations */ |
| static struct panel_config generic_dpi_panels[] = { |
| /* Sharp LQ043T1DG01 */ |
| { |
| { |
| .x_res = 480, |
| .y_res = 272, |
| |
| .pixel_clock = 9000, |
| |
| .hsw = 42, |
| .hfp = 3, |
| .hbp = 2, |
| |
| .vsw = 11, |
| .vfp = 3, |
| .vbp = 2, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .power_on_delay = 50, |
| .power_off_delay = 100, |
| .name = "sharp_lq", |
| }, |
| |
| /* Sharp LS037V7DW01 */ |
| { |
| { |
| .x_res = 480, |
| .y_res = 640, |
| |
| .pixel_clock = 19200, |
| |
| .hsw = 2, |
| .hfp = 1, |
| .hbp = 28, |
| |
| .vsw = 1, |
| .vfp = 1, |
| .vbp = 1, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .power_on_delay = 50, |
| .power_off_delay = 100, |
| .name = "sharp_ls", |
| }, |
| |
| /* Toppoly TDO35S */ |
| { |
| { |
| .x_res = 480, |
| .y_res = 640, |
| |
| .pixel_clock = 26000, |
| |
| .hfp = 104, |
| .hsw = 8, |
| .hbp = 8, |
| |
| .vfp = 4, |
| .vsw = 2, |
| .vbp = 2, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE, |
| }, |
| .power_on_delay = 0, |
| .power_off_delay = 0, |
| .name = "toppoly_tdo35s", |
| }, |
| |
| /* Samsung LTE430WQ-F0C */ |
| { |
| { |
| .x_res = 480, |
| .y_res = 272, |
| |
| .pixel_clock = 9200, |
| |
| .hfp = 8, |
| .hsw = 41, |
| .hbp = 45 - 41, |
| |
| .vfp = 4, |
| .vsw = 10, |
| .vbp = 12 - 10, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .power_on_delay = 0, |
| .power_off_delay = 0, |
| .name = "samsung_lte430wq_f0c", |
| }, |
| |
| /* Seiko 70WVW1TZ3Z3 */ |
| { |
| { |
| .x_res = 800, |
| .y_res = 480, |
| |
| .pixel_clock = 33000, |
| |
| .hsw = 128, |
| .hfp = 10, |
| .hbp = 10, |
| |
| .vsw = 2, |
| .vfp = 4, |
| .vbp = 11, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .power_on_delay = 0, |
| .power_off_delay = 0, |
| .name = "seiko_70wvw1tz3", |
| }, |
| |
| /* Powertip PH480272T */ |
| { |
| { |
| .x_res = 480, |
| .y_res = 272, |
| |
| .pixel_clock = 9000, |
| |
| .hsw = 40, |
| .hfp = 2, |
| .hbp = 2, |
| |
| .vsw = 10, |
| .vfp = 2, |
| .vbp = 2, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .power_on_delay = 0, |
| .power_off_delay = 0, |
| .name = "powertip_ph480272t", |
| }, |
| |
| /* Innolux AT070TN83 */ |
| { |
| { |
| .x_res = 800, |
| .y_res = 480, |
| |
| .pixel_clock = 40000, |
| |
| .hsw = 48, |
| .hfp = 1, |
| .hbp = 1, |
| |
| .vsw = 3, |
| .vfp = 12, |
| .vbp = 25, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .power_on_delay = 0, |
| .power_off_delay = 0, |
| .name = "innolux_at070tn83", |
| }, |
| |
| /* NEC NL2432DR22-11B */ |
| { |
| { |
| .x_res = 240, |
| .y_res = 320, |
| |
| .pixel_clock = 5400, |
| |
| .hsw = 3, |
| .hfp = 3, |
| .hbp = 39, |
| |
| .vsw = 1, |
| .vfp = 2, |
| .vbp = 7, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "nec_nl2432dr22-11b", |
| }, |
| |
| /* Unknown panel used in OMAP H4 */ |
| { |
| { |
| .x_res = 240, |
| .y_res = 320, |
| |
| .pixel_clock = 6250, |
| |
| .hsw = 15, |
| .hfp = 15, |
| .hbp = 60, |
| |
| .vsw = 1, |
| .vfp = 1, |
| .vbp = 1, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "h4", |
| }, |
| |
| /* Unknown panel used in Samsung OMAP2 Apollon */ |
| { |
| { |
| .x_res = 480, |
| .y_res = 272, |
| |
| .pixel_clock = 6250, |
| |
| .hsw = 41, |
| .hfp = 2, |
| .hbp = 2, |
| |
| .vsw = 10, |
| .vfp = 2, |
| .vbp = 2, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "apollon", |
| }, |
| /* FocalTech ETM070003DH6 */ |
| { |
| { |
| .x_res = 800, |
| .y_res = 480, |
| |
| .pixel_clock = 28000, |
| |
| .hsw = 48, |
| .hfp = 40, |
| .hbp = 40, |
| |
| .vsw = 3, |
| .vfp = 13, |
| .vbp = 29, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "focaltech_etm070003dh6", |
| }, |
| |
| /* Microtips Technologies - UMSH-8173MD */ |
| { |
| { |
| .x_res = 800, |
| .y_res = 480, |
| |
| .pixel_clock = 34560, |
| |
| .hsw = 13, |
| .hfp = 101, |
| .hbp = 101, |
| |
| .vsw = 23, |
| .vfp = 1, |
| .vbp = 1, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .power_on_delay = 0, |
| .power_off_delay = 0, |
| .name = "microtips_umsh_8173md", |
| }, |
| |
| /* OrtusTech COM43H4M10XTC */ |
| { |
| { |
| .x_res = 480, |
| .y_res = 272, |
| |
| .pixel_clock = 8000, |
| |
| .hsw = 41, |
| .hfp = 8, |
| .hbp = 4, |
| |
| .vsw = 10, |
| .vfp = 4, |
| .vbp = 2, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "ortustech_com43h4m10xtc", |
| }, |
| |
| /* Innolux AT080TN52 */ |
| { |
| { |
| .x_res = 800, |
| .y_res = 600, |
| |
| .pixel_clock = 41142, |
| |
| .hsw = 20, |
| .hfp = 210, |
| .hbp = 46, |
| |
| .vsw = 10, |
| .vfp = 12, |
| .vbp = 23, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "innolux_at080tn52", |
| }, |
| |
| /* Mitsubishi AA084SB01 */ |
| { |
| { |
| .x_res = 800, |
| .y_res = 600, |
| .pixel_clock = 40000, |
| |
| .hsw = 1, |
| .hfp = 254, |
| .hbp = 1, |
| |
| .vsw = 1, |
| .vfp = 26, |
| .vbp = 1, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "mitsubishi_aa084sb01", |
| }, |
| /* EDT ET0500G0DH6 */ |
| { |
| { |
| .x_res = 800, |
| .y_res = 480, |
| .pixel_clock = 33260, |
| |
| .hsw = 128, |
| .hfp = 216, |
| .hbp = 40, |
| |
| .vsw = 2, |
| .vfp = 35, |
| .vbp = 10, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "edt_et0500g0dh6", |
| }, |
| |
| /* Prime-View PD050VL1 */ |
| { |
| { |
| .x_res = 640, |
| .y_res = 480, |
| |
| .pixel_clock = 25000, |
| |
| .hsw = 96, |
| .hfp = 18, |
| .hbp = 46, |
| |
| .vsw = 2, |
| .vfp = 10, |
| .vbp = 33, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "primeview_pd050vl1", |
| }, |
| |
| /* Prime-View PM070WL4 */ |
| { |
| { |
| .x_res = 800, |
| .y_res = 480, |
| |
| .pixel_clock = 32000, |
| |
| .hsw = 128, |
| .hfp = 42, |
| .hbp = 86, |
| |
| .vsw = 2, |
| .vfp = 10, |
| .vbp = 33, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "primeview_pm070wl4", |
| }, |
| |
| /* Prime-View PD104SLF */ |
| { |
| { |
| .x_res = 800, |
| .y_res = 600, |
| |
| .pixel_clock = 40000, |
| |
| .hsw = 128, |
| .hfp = 42, |
| .hbp = 86, |
| |
| .vsw = 4, |
| .vfp = 1, |
| .vbp = 23, |
| |
| .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, |
| .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE, |
| .de_level = OMAPDSS_SIG_ACTIVE_HIGH, |
| .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, |
| }, |
| .name = "primeview_pd104slf", |
| }, |
| }; |
| |
| struct panel_drv_data { |
| |
| struct omap_dss_device *dssdev; |
| |
| struct panel_config *panel_config; |
| |
| struct mutex lock; |
| }; |
| |
| static inline struct panel_generic_dpi_data |
| *get_panel_data(const struct omap_dss_device *dssdev) |
| { |
| return (struct panel_generic_dpi_data *) dssdev->data; |
| } |
| |
| static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev) |
| { |
| int r; |
| struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev); |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| struct panel_config *panel_config = drv_data->panel_config; |
| |
| if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) |
| return 0; |
| |
| omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings); |
| |
| r = omapdss_dpi_display_enable(dssdev); |
| if (r) |
| goto err0; |
| |
| /* wait couple of vsyncs until enabling the LCD */ |
| if (panel_config->power_on_delay) |
| msleep(panel_config->power_on_delay); |
| |
| if (panel_data->platform_enable) { |
| r = panel_data->platform_enable(dssdev); |
| if (r) |
| goto err1; |
| } |
| |
| return 0; |
| err1: |
| omapdss_dpi_display_disable(dssdev); |
| err0: |
| return r; |
| } |
| |
| static void generic_dpi_panel_power_off(struct omap_dss_device *dssdev) |
| { |
| struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev); |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| struct panel_config *panel_config = drv_data->panel_config; |
| |
| if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) |
| return; |
| |
| if (panel_data->platform_disable) |
| panel_data->platform_disable(dssdev); |
| |
| /* wait couple of vsyncs after disabling the LCD */ |
| if (panel_config->power_off_delay) |
| msleep(panel_config->power_off_delay); |
| |
| omapdss_dpi_display_disable(dssdev); |
| } |
| |
| static int generic_dpi_panel_probe(struct omap_dss_device *dssdev) |
| { |
| struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev); |
| struct panel_config *panel_config = NULL; |
| struct panel_drv_data *drv_data = NULL; |
| int i; |
| |
| dev_dbg(&dssdev->dev, "probe\n"); |
| |
| if (!panel_data || !panel_data->name) |
| return -EINVAL; |
| |
| for (i = 0; i < ARRAY_SIZE(generic_dpi_panels); i++) { |
| if (strcmp(panel_data->name, generic_dpi_panels[i].name) == 0) { |
| panel_config = &generic_dpi_panels[i]; |
| break; |
| } |
| } |
| |
| if (!panel_config) |
| return -EINVAL; |
| |
| dssdev->panel.timings = panel_config->timings; |
| |
| drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL); |
| if (!drv_data) |
| return -ENOMEM; |
| |
| drv_data->dssdev = dssdev; |
| drv_data->panel_config = panel_config; |
| |
| mutex_init(&drv_data->lock); |
| |
| dev_set_drvdata(&dssdev->dev, drv_data); |
| |
| return 0; |
| } |
| |
| static void __exit generic_dpi_panel_remove(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| |
| dev_dbg(&dssdev->dev, "remove\n"); |
| |
| kfree(drv_data); |
| |
| dev_set_drvdata(&dssdev->dev, NULL); |
| } |
| |
| static int generic_dpi_panel_enable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| int r; |
| |
| mutex_lock(&drv_data->lock); |
| |
| r = generic_dpi_panel_power_on(dssdev); |
| if (r) |
| goto err; |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| err: |
| mutex_unlock(&drv_data->lock); |
| |
| return r; |
| } |
| |
| static void generic_dpi_panel_disable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| |
| mutex_lock(&drv_data->lock); |
| |
| generic_dpi_panel_power_off(dssdev); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| |
| mutex_unlock(&drv_data->lock); |
| } |
| |
| static int generic_dpi_panel_suspend(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| |
| mutex_lock(&drv_data->lock); |
| |
| generic_dpi_panel_power_off(dssdev); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; |
| |
| mutex_unlock(&drv_data->lock); |
| |
| return 0; |
| } |
| |
| static int generic_dpi_panel_resume(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| int r; |
| |
| mutex_lock(&drv_data->lock); |
| |
| r = generic_dpi_panel_power_on(dssdev); |
| if (r) |
| goto err; |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| |
| err: |
| mutex_unlock(&drv_data->lock); |
| |
| return r; |
| } |
| |
| static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| |
| mutex_lock(&drv_data->lock); |
| |
| omapdss_dpi_set_timings(dssdev, timings); |
| |
| mutex_unlock(&drv_data->lock); |
| } |
| |
| static void generic_dpi_panel_get_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| |
| mutex_lock(&drv_data->lock); |
| |
| *timings = dssdev->panel.timings; |
| |
| mutex_unlock(&drv_data->lock); |
| } |
| |
| static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); |
| int r; |
| |
| mutex_lock(&drv_data->lock); |
| |
| r = dpi_check_timings(dssdev, timings); |
| |
| mutex_unlock(&drv_data->lock); |
| |
| return r; |
| } |
| |
| static struct omap_dss_driver dpi_driver = { |
| .probe = generic_dpi_panel_probe, |
| .remove = __exit_p(generic_dpi_panel_remove), |
| |
| .enable = generic_dpi_panel_enable, |
| .disable = generic_dpi_panel_disable, |
| .suspend = generic_dpi_panel_suspend, |
| .resume = generic_dpi_panel_resume, |
| |
| .set_timings = generic_dpi_panel_set_timings, |
| .get_timings = generic_dpi_panel_get_timings, |
| .check_timings = generic_dpi_panel_check_timings, |
| |
| .driver = { |
| .name = "generic_dpi_panel", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init generic_dpi_panel_drv_init(void) |
| { |
| return omap_dss_register_driver(&dpi_driver); |
| } |
| |
| static void __exit generic_dpi_panel_drv_exit(void) |
| { |
| omap_dss_unregister_driver(&dpi_driver); |
| } |
| |
| module_init(generic_dpi_panel_drv_init); |
| module_exit(generic_dpi_panel_drv_exit); |
| MODULE_LICENSE("GPL"); |