| * Clock bindings for Freescale i.MX25 |
| |
| Required properties: |
| - compatible: Should be "fsl,imx25-ccm" |
| - reg: Address and length of the register set |
| - interrupts: Should contain CCM interrupt |
| - #clock-cells: Should be <1> |
| |
| The clock consumer should specify the desired clock by having the clock |
| ID in its "clocks" phandle cell. The following is a full list of i.MX25 |
| clocks and IDs. |
| |
| Clock ID |
| --------------------------- |
| dummy 0 |
| osc 1 |
| mpll 2 |
| upll 3 |
| mpll_cpu_3_4 4 |
| cpu_sel 5 |
| cpu 6 |
| ahb 7 |
| usb_div 8 |
| ipg 9 |
| per0_sel 10 |
| per1_sel 11 |
| per2_sel 12 |
| per3_sel 13 |
| per4_sel 14 |
| per5_sel 15 |
| per6_sel 16 |
| per7_sel 17 |
| per8_sel 18 |
| per9_sel 19 |
| per10_sel 20 |
| per11_sel 21 |
| per12_sel 22 |
| per13_sel 23 |
| per14_sel 24 |
| per15_sel 25 |
| per0 26 |
| per1 27 |
| per2 28 |
| per3 29 |
| per4 30 |
| per5 31 |
| per6 32 |
| per7 33 |
| per8 34 |
| per9 35 |
| per10 36 |
| per11 37 |
| per12 38 |
| per13 39 |
| per14 40 |
| per15 41 |
| csi_ipg_per 42 |
| epit_ipg_per 43 |
| esai_ipg_per 44 |
| esdhc1_ipg_per 45 |
| esdhc2_ipg_per 46 |
| gpt_ipg_per 47 |
| i2c_ipg_per 48 |
| lcdc_ipg_per 49 |
| nfc_ipg_per 50 |
| owire_ipg_per 51 |
| pwm_ipg_per 52 |
| sim1_ipg_per 53 |
| sim2_ipg_per 54 |
| ssi1_ipg_per 55 |
| ssi2_ipg_per 56 |
| uart_ipg_per 57 |
| ata_ahb 58 |
| reserved 59 |
| csi_ahb 60 |
| emi_ahb 61 |
| esai_ahb 62 |
| esdhc1_ahb 63 |
| esdhc2_ahb 64 |
| fec_ahb 65 |
| lcdc_ahb 66 |
| rtic_ahb 67 |
| sdma_ahb 68 |
| slcdc_ahb 69 |
| usbotg_ahb 70 |
| reserved 71 |
| reserved 72 |
| reserved 73 |
| reserved 74 |
| can1_ipg 75 |
| can2_ipg 76 |
| csi_ipg 77 |
| cspi1_ipg 78 |
| cspi2_ipg 79 |
| cspi3_ipg 80 |
| dryice_ipg 81 |
| ect_ipg 82 |
| epit1_ipg 83 |
| epit2_ipg 84 |
| reserved 85 |
| esdhc1_ipg 86 |
| esdhc2_ipg 87 |
| fec_ipg 88 |
| reserved 89 |
| reserved 90 |
| reserved 91 |
| gpt1_ipg 92 |
| gpt2_ipg 93 |
| gpt3_ipg 94 |
| gpt4_ipg 95 |
| reserved 96 |
| reserved 97 |
| reserved 98 |
| iim_ipg 99 |
| reserved 100 |
| reserved 101 |
| kpp_ipg 102 |
| lcdc_ipg 103 |
| reserved 104 |
| pwm1_ipg 105 |
| pwm2_ipg 106 |
| pwm3_ipg 107 |
| pwm4_ipg 108 |
| rngb_ipg 109 |
| reserved 110 |
| scc_ipg 111 |
| sdma_ipg 112 |
| sim1_ipg 113 |
| sim2_ipg 114 |
| slcdc_ipg 115 |
| spba_ipg 116 |
| ssi1_ipg 117 |
| ssi2_ipg 118 |
| tsc_ipg 119 |
| uart1_ipg 120 |
| uart2_ipg 121 |
| uart3_ipg 122 |
| uart4_ipg 123 |
| uart5_ipg 124 |
| reserved 125 |
| wdt_ipg 126 |
| |
| Examples: |
| |
| clks: ccm@53f80000 { |
| compatible = "fsl,imx25-ccm"; |
| reg = <0x53f80000 0x4000>; |
| interrupts = <31>; |
| clock-output-names = ... |
| "uart_ipg", |
| "uart_serial", |
| ...; |
| }; |
| |
| uart1: serial@43f90000 { |
| compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| reg = <0x43f90000 0x4000>; |
| interrupts = <45>; |
| clocks = <&clks 79>, <&clks 50>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |