| /* |
| * Copyright 2000-2015 Avago Technologies. All rights reserved. |
| * |
| * |
| * Name: mpi2_cnfg.h |
| * Title: MPI Configuration messages and pages |
| * Creation Date: November 10, 2006 |
| * |
| * mpi2_cnfg.h Version: 02.00.35 |
| * |
| * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 |
| * prefix are for use only on MPI v2.5 products, and must not be used |
| * with MPI v2.0 products. Unless otherwise noted, names beginning with |
| * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. |
| * |
| * Version History |
| * --------------- |
| * |
| * Date Version Description |
| * -------- -------- ------------------------------------------------------ |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. |
| * Added Manufacturing Page 11. |
| * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE |
| * define. |
| * 06-26-07 02.00.02 Adding generic structure for product-specific |
| * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. |
| * Rework of BIOS Page 2 configuration page. |
| * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the |
| * forms. |
| * Added configuration pages IOC Page 8 and Driver |
| * Persistent Mapping Page 0. |
| * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated |
| * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, |
| * RAID Physical Disk Pages 0 and 1, RAID Configuration |
| * Page 0). |
| * Added new value for AccessStatus field of SAS Device |
| * Page 0 (_SATA_NEEDS_INITIALIZATION). |
| * 10-31-07 02.00.04 Added missing SEPDevHandle field to |
| * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. |
| * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for |
| * NVDATA. |
| * Modified IOC Page 7 to use masks and added field for |
| * SASBroadcastPrimitiveMasks. |
| * Added MPI2_CONFIG_PAGE_BIOS_4. |
| * Added MPI2_CONFIG_PAGE_LOG_0. |
| * 02-29-08 02.00.06 Modified various names to make them 32-character unique. |
| * Added SAS Device IDs. |
| * Updated Integrated RAID configuration pages including |
| * Manufacturing Page 4, IOC Page 6, and RAID Configuration |
| * Page 0. |
| * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. |
| * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. |
| * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. |
| * Added missing MaxNumRoutedSasAddresses field to |
| * MPI2_CONFIG_PAGE_EXPANDER_0. |
| * Added SAS Port Page 0. |
| * Modified structure layout for |
| * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. |
| * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use |
| * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. |
| * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF |
| * to 0x000000FF. |
| * Added two new values for the Physical Disk Coercion Size |
| * bits in the Flags field of Manufacturing Page 4. |
| * Added product-specific Manufacturing pages 16 to 31. |
| * Modified Flags bits for controlling write cache on SATA |
| * drives in IO Unit Page 1. |
| * Added new bit to AdditionalControlFlags of SAS IO Unit |
| * Page 1 to control Invalid Topology Correction. |
| * Added additional defines for RAID Volume Page 0 |
| * VolumeStatusFlags field. |
| * Modified meaning of RAID Volume Page 0 VolumeSettings |
| * define for auto-configure of hot-swap drives. |
| * Added SupportedPhysDisks field to RAID Volume Page 1 and |
| * added related defines. |
| * Added PhysDiskAttributes field (and related defines) to |
| * RAID Physical Disk Page 0. |
| * Added MPI2_SAS_PHYINFO_PHY_VACANT define. |
| * Added three new DiscoveryStatus bits for SAS IO Unit |
| * Page 0 and SAS Expander Page 0. |
| * Removed multiplexing information from SAS IO Unit pages. |
| * Added BootDeviceWaitTime field to SAS IO Unit Page 4. |
| * Removed Zone Address Resolved bit from PhyInfo and from |
| * Expander Page 0 Flags field. |
| * Added two new AccessStatus values to SAS Device Page 0 |
| * for indicating routing problems. Added 3 reserved words |
| * to this page. |
| * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. |
| * Inserted missing reserved field into structure for IOC |
| * Page 6. |
| * Added more pending task bits to RAID Volume Page 0 |
| * VolumeStatusFlags defines. |
| * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. |
| * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 |
| * and SAS Expander Page 0 to flag a downstream initiator |
| * when in simplified routing mode. |
| * Removed SATA Init Failure defines for DiscoveryStatus |
| * fields of SAS IO Unit Page 0 and SAS Expander Page 0. |
| * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. |
| * Added PortGroups, DmaGroup, and ControlGroup fields to |
| * SAS Device Page 0. |
| * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO |
| * Unit Page 6. |
| * Added expander reduced functionality data to SAS |
| * Expander Page 0. |
| * Added SAS PHY Page 2 and SAS PHY Page 3. |
| * 07-30-09 02.00.12 Added IO Unit Page 7. |
| * Added new device ids. |
| * Added SAS IO Unit Page 5. |
| * Added partial and slumber power management capable flags |
| * to SAS Device Page 0 Flags field. |
| * Added PhyInfo defines for power condition. |
| * Added Ethernet configuration pages. |
| * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. |
| * Added SAS PHY Page 4 structure and defines. |
| * 02-10-10 02.00.14 Modified the comments for the configuration page |
| * structures that contain an array of data. The host |
| * should use the "count" field in the page data (e.g. the |
| * NumPhys field) to determine the number of valid elements |
| * in the array. |
| * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. |
| * Added PowerManagementCapabilities to IO Unit Page 7. |
| * Added PortWidthModGroup field to |
| * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. |
| * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. |
| * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. |
| * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. |
| * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT |
| * define. |
| * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. |
| * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. |
| * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing) |
| * defines. |
| * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to |
| * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for |
| * the Pinout field. |
| * Added BoardTemperature and BoardTemperatureUnits fields |
| * to MPI2_CONFIG_PAGE_IO_UNIT_7. |
| * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define |
| * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. |
| * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. |
| * Added IO Unit Page 8, IO Unit Page 9, |
| * and IO Unit Page 10. |
| * Added SASNotifyPrimitiveMasks field to |
| * MPI2_CONFIG_PAGE_IOC_7. |
| * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). |
| * 05-25-11 02.00.20 Cleaned up a few comments. |
| * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities |
| * for PCIe link as obsolete. |
| * Added SpinupFlags field containing a Disable Spin-up bit |
| * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO |
| * Unit Page 4. |
| * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT. |
| * Added UEFIVersion field to BIOS Page 1 and defined new |
| * BiosOptions bits. |
| * Incorporating additions for MPI v2.5. |
| * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER. |
| * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID. |
| * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as |
| * obsolete for MPI v2.5 and later. |
| * Added some defines for 12G SAS speeds. |
| * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK. |
| * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to |
| * match the specification. |
| * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for |
| * future use. |
| * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for |
| * MPI2_CONFIG_PAGE_MAN_7. |
| * Added EnclosureLevel and ConnectorName fields to |
| * MPI2_CONFIG_PAGE_SAS_DEV_0. |
| * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for |
| * MPI2_CONFIG_PAGE_SAS_DEV_0. |
| * Added EnclosureLevel field to |
| * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. |
| * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for |
| * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. |
| * 01-08-14 02.00.28 Added more defines for the BiosOptions field of |
| * MPI2_CONFIG_PAGE_BIOS_1. |
| * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and |
| * more defines for the BiosOptions field. |
| * 11-18-14 02.00.30 Updated copyright information. |
| * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG. |
| * Added AdapterOrderAux fields to BIOS Page 3. |
| * 03-16-15 02.00.31 Updated for MPI v2.6. |
| * Added Flags field to IO Unit Page 7. |
| * Added new SAS Phy Event codes |
| * 05-25-15 02.00.33 Added more defines for the BiosOptions field of |
| * MPI2_CONFIG_PAGE_BIOS_1. |
| * 08-25-15 02.00.34 Bumped Header Version. |
| * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4. |
| * -------------------------------------------------------------------------- |
| */ |
| |
| #ifndef MPI2_CNFG_H |
| #define MPI2_CNFG_H |
| |
| /***************************************************************************** |
| * Configuration Page Header and defines |
| *****************************************************************************/ |
| |
| /*Config Page Header */ |
| typedef struct _MPI2_CONFIG_PAGE_HEADER { |
| U8 PageVersion; /*0x00 */ |
| U8 PageLength; /*0x01 */ |
| U8 PageNumber; /*0x02 */ |
| U8 PageType; /*0x03 */ |
| } MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER, |
| Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t; |
| |
| typedef union _MPI2_CONFIG_PAGE_HEADER_UNION { |
| MPI2_CONFIG_PAGE_HEADER Struct; |
| U8 Bytes[4]; |
| U16 Word16[2]; |
| U32 Word32; |
| } MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION, |
| Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion; |
| |
| /*Extended Config Page Header */ |
| typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER { |
| U8 PageVersion; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 PageNumber; /*0x02 */ |
| U8 PageType; /*0x03 */ |
| U16 ExtPageLength; /*0x04 */ |
| U8 ExtPageType; /*0x06 */ |
| U8 Reserved2; /*0x07 */ |
| } MPI2_CONFIG_EXTENDED_PAGE_HEADER, |
| *PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER, |
| Mpi2ConfigExtendedPageHeader_t, |
| *pMpi2ConfigExtendedPageHeader_t; |
| |
| typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION { |
| MPI2_CONFIG_PAGE_HEADER Struct; |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext; |
| U8 Bytes[8]; |
| U16 Word16[4]; |
| U32 Word32[2]; |
| } MPI2_CONFIG_EXT_PAGE_HEADER_UNION, |
| *PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION, |
| Mpi2ConfigPageExtendedHeaderUnion, |
| *pMpi2ConfigPageExtendedHeaderUnion; |
| |
| |
| /*PageType field values */ |
| #define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00) |
| #define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10) |
| #define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20) |
| #define MPI2_CONFIG_PAGEATTR_MASK (0xF0) |
| |
| #define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00) |
| #define MPI2_CONFIG_PAGETYPE_IOC (0x01) |
| #define MPI2_CONFIG_PAGETYPE_BIOS (0x02) |
| #define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08) |
| #define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09) |
| #define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) |
| #define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F) |
| #define MPI2_CONFIG_PAGETYPE_MASK (0x0F) |
| |
| #define MPI2_CONFIG_TYPENUM_MASK (0x0FFF) |
| |
| |
| /*ExtPageType field values */ |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) |
| #define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14) |
| #define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) |
| #define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) |
| #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) |
| #define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) |
| #define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A) |
| |
| |
| /***************************************************************************** |
| * PageAddress defines |
| *****************************************************************************/ |
| |
| /*RAID Volume PageAddress format */ |
| #define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000) |
| |
| #define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF) |
| |
| |
| /*RAID Physical Disk PageAddress format */ |
| #define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000) |
| #define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000) |
| #define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000) |
| |
| #define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) |
| #define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF) |
| |
| |
| /*SAS Expander PageAddress format */ |
| #define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000) |
| #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000) |
| #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000) |
| |
| #define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) |
| #define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) |
| #define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) |
| |
| |
| /*SAS Device PageAddress format */ |
| #define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000) |
| |
| #define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) |
| |
| |
| /*SAS PHY PageAddress format */ |
| #define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) |
| #define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000) |
| |
| #define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) |
| #define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) |
| |
| |
| /*SAS Port PageAddress format */ |
| #define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) |
| #define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) |
| |
| #define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF) |
| |
| |
| /*SAS Enclosure PageAddress format */ |
| #define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000) |
| |
| #define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) |
| |
| |
| /*RAID Configuration PageAddress format */ |
| #define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000) |
| #define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000) |
| #define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000) |
| |
| #define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF) |
| |
| |
| /*Driver Persistent Mapping PageAddress format */ |
| #define MPI2_DPM_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000) |
| |
| #define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000) |
| #define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16) |
| #define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) |
| |
| |
| /*Ethernet PageAddress format */ |
| #define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000) |
| |
| #define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) |
| |
| |
| /**************************************************************************** |
| * Configuration messages |
| ****************************************************************************/ |
| |
| /*Configuration Request Message */ |
| typedef struct _MPI2_CONFIG_REQUEST { |
| U8 Action; /*0x00 */ |
| U8 SGLFlags; /*0x01 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 ExtPageLength; /*0x04 */ |
| U8 ExtPageType; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved1; /*0x0A */ |
| U8 Reserved2; /*0x0C */ |
| U8 ProxyVF_ID; /*0x0D */ |
| U16 Reserved4; /*0x0E */ |
| U32 Reserved3; /*0x10 */ |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */ |
| U32 PageAddress; /*0x18 */ |
| MPI2_SGE_IO_UNION PageBufferSGE; /*0x1C */ |
| } MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST, |
| Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t; |
| |
| /*values for the Action field */ |
| #define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00) |
| #define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) |
| #define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) |
| #define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03) |
| #define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) |
| #define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) |
| #define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) |
| #define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) |
| |
| /*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ |
| |
| |
| /*Config Reply Message */ |
| typedef struct _MPI2_CONFIG_REPLY { |
| U8 Action; /*0x00 */ |
| U8 SGLFlags; /*0x01 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 ExtPageLength; /*0x04 */ |
| U8 ExtPageType; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved1; /*0x0A */ |
| U16 Reserved2; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */ |
| } MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY, |
| Mpi2ConfigReply_t, *pMpi2ConfigReply_t; |
| |
| |
| |
| /***************************************************************************** |
| * |
| * C o n f i g u r a t i o n P a g e s |
| * |
| *****************************************************************************/ |
| |
| /**************************************************************************** |
| * Manufacturing Config pages |
| ****************************************************************************/ |
| |
| #define MPI2_MFGPAGE_VENDORID_LSI (0x1000) |
| |
| /*MPI v2.0 SAS products */ |
| #define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) |
| #define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072) |
| #define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074) |
| #define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076) |
| #define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077) |
| #define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) |
| #define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) |
| |
| #define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E) |
| |
| #define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080) |
| #define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081) |
| #define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082) |
| #define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083) |
| #define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084) |
| #define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085) |
| #define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086) |
| #define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087) |
| #define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) |
| |
| /*MPI v2.5 SAS products */ |
| #define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096) |
| #define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097) |
| #define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090) |
| #define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091) |
| #define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094) |
| #define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095) |
| |
| /* MPI v2.6 SAS Products */ |
| #define MPI26_MFGPAGE_DEVID_SAS3216 (0x00C9) |
| #define MPI26_MFGPAGE_DEVID_SAS3224 (0x00C4) |
| #define MPI26_MFGPAGE_DEVID_SAS3316_1 (0x00C5) |
| #define MPI26_MFGPAGE_DEVID_SAS3316_2 (0x00C6) |
| #define MPI26_MFGPAGE_DEVID_SAS3316_3 (0x00C7) |
| #define MPI26_MFGPAGE_DEVID_SAS3316_4 (0x00C8) |
| #define MPI26_MFGPAGE_DEVID_SAS3324_1 (0x00C0) |
| #define MPI26_MFGPAGE_DEVID_SAS3324_2 (0x00C1) |
| #define MPI26_MFGPAGE_DEVID_SAS3324_3 (0x00C2) |
| #define MPI26_MFGPAGE_DEVID_SAS3324_4 (0x00C3) |
| |
| #define MPI26_MFGPAGE_DEVID_SAS3516 (0x00AA) |
| #define MPI26_MFGPAGE_DEVID_SAS3516_1 (0x00AB) |
| #define MPI26_MFGPAGE_DEVID_SAS3416 (0x00AC) |
| #define MPI26_MFGPAGE_DEVID_SAS3508 (0x00AD) |
| #define MPI26_MFGPAGE_DEVID_SAS3508_1 (0x00AE) |
| #define MPI26_MFGPAGE_DEVID_SAS3408 (0x00AF) |
| |
| /*Manufacturing Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_0 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U8 ChipName[16]; /*0x04 */ |
| U8 ChipRevision[8]; /*0x14 */ |
| U8 BoardName[16]; /*0x1C */ |
| U8 BoardAssembly[16]; /*0x2C */ |
| U8 BoardTracerNumber[16]; /*0x3C */ |
| } MPI2_CONFIG_PAGE_MAN_0, |
| *PTR_MPI2_CONFIG_PAGE_MAN_0, |
| Mpi2ManufacturingPage0_t, |
| *pMpi2ManufacturingPage0_t; |
| |
| #define MPI2_MANUFACTURING0_PAGEVERSION (0x00) |
| |
| |
| /*Manufacturing Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_1 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U8 VPD[256]; /*0x04 */ |
| } MPI2_CONFIG_PAGE_MAN_1, |
| *PTR_MPI2_CONFIG_PAGE_MAN_1, |
| Mpi2ManufacturingPage1_t, |
| *pMpi2ManufacturingPage1_t; |
| |
| #define MPI2_MANUFACTURING1_PAGEVERSION (0x00) |
| |
| |
| typedef struct _MPI2_CHIP_REVISION_ID { |
| U16 DeviceID; /*0x00 */ |
| U8 PCIRevisionID; /*0x02 */ |
| U8 Reserved; /*0x03 */ |
| } MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID, |
| Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t; |
| |
| |
| /*Manufacturing Page 2 */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS |
| #define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_2 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ |
| U32 |
| HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */ |
| } MPI2_CONFIG_PAGE_MAN_2, |
| *PTR_MPI2_CONFIG_PAGE_MAN_2, |
| Mpi2ManufacturingPage2_t, |
| *pMpi2ManufacturingPage2_t; |
| |
| #define MPI2_MANUFACTURING2_PAGEVERSION (0x00) |
| |
| |
| /*Manufacturing Page 3 */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI2_MAN_PAGE_3_INFO_WORDS |
| #define MPI2_MAN_PAGE_3_INFO_WORDS (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_3 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ |
| U32 |
| Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */ |
| } MPI2_CONFIG_PAGE_MAN_3, |
| *PTR_MPI2_CONFIG_PAGE_MAN_3, |
| Mpi2ManufacturingPage3_t, |
| *pMpi2ManufacturingPage3_t; |
| |
| #define MPI2_MANUFACTURING3_PAGEVERSION (0x00) |
| |
| |
| /*Manufacturing Page 4 */ |
| |
| typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS { |
| U8 PowerSaveFlags; /*0x00 */ |
| U8 InternalOperationsSleepTime; /*0x01 */ |
| U8 InternalOperationsRunTime; /*0x02 */ |
| U8 HostIdleTime; /*0x03 */ |
| } MPI2_MANPAGE4_PWR_SAVE_SETTINGS, |
| *PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS, |
| Mpi2ManPage4PwrSaveSettings_t, |
| *pMpi2ManPage4PwrSaveSettings_t; |
| |
| /*defines for the PowerSaveFlags field */ |
| #define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03) |
| #define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00) |
| #define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01) |
| #define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02) |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_4 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x04 */ |
| U32 Flags; /*0x08 */ |
| U8 InquirySize; /*0x0C */ |
| U8 Reserved2; /*0x0D */ |
| U16 Reserved3; /*0x0E */ |
| U8 InquiryData[56]; /*0x10 */ |
| U32 RAID0VolumeSettings; /*0x48 */ |
| U32 RAID1EVolumeSettings; /*0x4C */ |
| U32 RAID1VolumeSettings; /*0x50 */ |
| U32 RAID10VolumeSettings; /*0x54 */ |
| U32 Reserved4; /*0x58 */ |
| U32 Reserved5; /*0x5C */ |
| MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /*0x60 */ |
| U8 MaxOCEDisks; /*0x64 */ |
| U8 ResyncRate; /*0x65 */ |
| U16 DataScrubDuration; /*0x66 */ |
| U8 MaxHotSpares; /*0x68 */ |
| U8 MaxPhysDisksPerVol; /*0x69 */ |
| U8 MaxPhysDisks; /*0x6A */ |
| U8 MaxVolumes; /*0x6B */ |
| } MPI2_CONFIG_PAGE_MAN_4, |
| *PTR_MPI2_CONFIG_PAGE_MAN_4, |
| Mpi2ManufacturingPage4_t, |
| *pMpi2ManufacturingPage4_t; |
| |
| #define MPI2_MANUFACTURING4_PAGEVERSION (0x0A) |
| |
| /*Manufacturing Page 4 Flags field */ |
| #define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000) |
| #define MPI2_MANPAGE4_METADATA_512MB (0x00000000) |
| |
| #define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000) |
| #define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000) |
| #define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000) |
| |
| #define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00) |
| #define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000) |
| #define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400) |
| #define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800) |
| #define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00) |
| |
| #define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300) |
| #define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000) |
| #define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100) |
| #define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200) |
| |
| #define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080) |
| #define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040) |
| #define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020) |
| #define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010) |
| #define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008) |
| #define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004) |
| #define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002) |
| #define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001) |
| |
| |
| /*Manufacturing Page 5 */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhys at runtime. |
| */ |
| #ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES |
| #define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) |
| #endif |
| |
| typedef struct _MPI2_MANUFACTURING5_ENTRY { |
| U64 WWID; /*0x00 */ |
| U64 DeviceName; /*0x08 */ |
| } MPI2_MANUFACTURING5_ENTRY, |
| *PTR_MPI2_MANUFACTURING5_ENTRY, |
| Mpi2Manufacturing5Entry_t, |
| *pMpi2Manufacturing5Entry_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_5 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U8 NumPhys; /*0x04 */ |
| U8 Reserved1; /*0x05 */ |
| U16 Reserved2; /*0x06 */ |
| U32 Reserved3; /*0x08 */ |
| U32 Reserved4; /*0x0C */ |
| MPI2_MANUFACTURING5_ENTRY |
| Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */ |
| } MPI2_CONFIG_PAGE_MAN_5, |
| *PTR_MPI2_CONFIG_PAGE_MAN_5, |
| Mpi2ManufacturingPage5_t, |
| *pMpi2ManufacturingPage5_t; |
| |
| #define MPI2_MANUFACTURING5_PAGEVERSION (0x03) |
| |
| |
| /*Manufacturing Page 6 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_6 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 ProductSpecificInfo;/*0x04 */ |
| } MPI2_CONFIG_PAGE_MAN_6, |
| *PTR_MPI2_CONFIG_PAGE_MAN_6, |
| Mpi2ManufacturingPage6_t, |
| *pMpi2ManufacturingPage6_t; |
| |
| #define MPI2_MANUFACTURING6_PAGEVERSION (0x00) |
| |
| |
| /*Manufacturing Page 7 */ |
| |
| typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO { |
| U32 Pinout; /*0x00 */ |
| U8 Connector[16]; /*0x04 */ |
| U8 Location; /*0x14 */ |
| U8 ReceptacleID; /*0x15 */ |
| U16 Slot; /*0x16 */ |
| U32 Reserved2; /*0x18 */ |
| } MPI2_MANPAGE7_CONNECTOR_INFO, |
| *PTR_MPI2_MANPAGE7_CONNECTOR_INFO, |
| Mpi2ManPage7ConnectorInfo_t, |
| *pMpi2ManPage7ConnectorInfo_t; |
| |
| /*defines for the Pinout field */ |
| #define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00) |
| #define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8) |
| |
| #define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF) |
| #define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00) |
| #define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D) |
| |
| /*defines for the Location field */ |
| #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) |
| #define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02) |
| #define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04) |
| #define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08) |
| #define MPI2_MANPAGE7_LOCATION_AUTO (0x10) |
| #define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) |
| #define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhys at runtime. |
| */ |
| #ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX |
| #define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_7 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x04 */ |
| U32 Reserved2; /*0x08 */ |
| U32 Flags; /*0x0C */ |
| U8 EnclosureName[16]; /*0x10 */ |
| U8 NumPhys; /*0x20 */ |
| U8 Reserved3; /*0x21 */ |
| U16 Reserved4; /*0x22 */ |
| MPI2_MANPAGE7_CONNECTOR_INFO |
| ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */ |
| } MPI2_CONFIG_PAGE_MAN_7, |
| *PTR_MPI2_CONFIG_PAGE_MAN_7, |
| Mpi2ManufacturingPage7_t, |
| *pMpi2ManufacturingPage7_t; |
| |
| #define MPI2_MANUFACTURING7_PAGEVERSION (0x01) |
| |
| /*defines for the Flags field */ |
| #define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008) |
| #define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002) |
| #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) |
| |
| |
| /* |
| *Generic structure to use for product-specific manufacturing pages |
| *(currently Manufacturing Page 8 through Manufacturing Page 31). |
| */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_PS { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 ProductSpecificInfo;/*0x04 */ |
| } MPI2_CONFIG_PAGE_MAN_PS, |
| *PTR_MPI2_CONFIG_PAGE_MAN_PS, |
| Mpi2ManufacturingPagePS_t, |
| *pMpi2ManufacturingPagePS_t; |
| |
| #define MPI2_MANUFACTURING8_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING9_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING10_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING11_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING12_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING13_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING14_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING15_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING16_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING17_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING18_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING19_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING20_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING21_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING22_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING23_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING24_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING25_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING26_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING27_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING28_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING29_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING30_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING31_PAGEVERSION (0x00) |
| |
| |
| /**************************************************************************** |
| * IO Unit Config Pages |
| ****************************************************************************/ |
| |
| /*IO Unit Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U64 UniqueValue; /*0x04 */ |
| MPI2_VERSION_UNION NvdataVersionDefault; /*0x08 */ |
| MPI2_VERSION_UNION NvdataVersionPersistent; /*0x0A */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_0, |
| *PTR_MPI2_CONFIG_PAGE_IO_UNIT_0, |
| Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t; |
| |
| #define MPI2_IOUNITPAGE0_PAGEVERSION (0x02) |
| |
| |
| /*IO Unit Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Flags; /*0x04 */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_1, |
| *PTR_MPI2_CONFIG_PAGE_IO_UNIT_1, |
| Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t; |
| |
| #define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) |
| |
| /*IO Unit Page 1 Flags defines */ |
| #define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000) |
| #define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000) |
| #define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000) |
| #define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800) |
| #define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) |
| #define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9) |
| #define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) |
| #define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) |
| #define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) |
| #define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) |
| #define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) |
| #define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) |
| #define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) |
| |
| |
| /*IO Unit Page 3 */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for GPIOCount at runtime. |
| */ |
| #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX |
| #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U8 GPIOCount; /*0x04 */ |
| U8 Reserved1; /*0x05 */ |
| U16 Reserved2; /*0x06 */ |
| U16 |
| GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_3, |
| *PTR_MPI2_CONFIG_PAGE_IO_UNIT_3, |
| Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t; |
| |
| #define MPI2_IOUNITPAGE3_PAGEVERSION (0x01) |
| |
| /*defines for IO Unit Page 3 GPIOVal field */ |
| #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC) |
| #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) |
| #define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000) |
| #define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) |
| |
| |
| /*IO Unit Page 5 */ |
| |
| /* |
| *Upper layer code (drivers, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumDmaEngines at runtime. |
| */ |
| #ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES |
| #define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U64 |
| RaidAcceleratorBufferBaseAddress; /*0x04 */ |
| U64 |
| RaidAcceleratorBufferSize; /*0x0C */ |
| U64 |
| RaidAcceleratorControlBaseAddress; /*0x14 */ |
| U8 RAControlSize; /*0x1C */ |
| U8 NumDmaEngines; /*0x1D */ |
| U8 RAMinControlSize; /*0x1E */ |
| U8 RAMaxControlSize; /*0x1F */ |
| U32 Reserved1; /*0x20 */ |
| U32 Reserved2; /*0x24 */ |
| U32 Reserved3; /*0x28 */ |
| U32 |
| DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_5, |
| *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, |
| Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t; |
| |
| #define MPI2_IOUNITPAGE5_PAGEVERSION (0x00) |
| |
| /*defines for IO Unit Page 5 DmaEngineCapabilities field */ |
| #define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000) |
| #define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16) |
| |
| #define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008) |
| #define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004) |
| #define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002) |
| #define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001) |
| |
| |
| /*IO Unit Page 6 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U16 Flags; /*0x04 */ |
| U8 RAHostControlSize; /*0x06 */ |
| U8 Reserved0; /*0x07 */ |
| U64 |
| RaidAcceleratorHostControlBaseAddress; /*0x08 */ |
| U32 Reserved1; /*0x10 */ |
| U32 Reserved2; /*0x14 */ |
| U32 Reserved3; /*0x18 */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_6, |
| *PTR_MPI2_CONFIG_PAGE_IO_UNIT_6, |
| Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t; |
| |
| #define MPI2_IOUNITPAGE6_PAGEVERSION (0x00) |
| |
| /*defines for IO Unit Page 6 Flags field */ |
| #define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001) |
| |
| |
| /*IO Unit Page 7 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U8 CurrentPowerMode; /*0x04 */ |
| U8 PreviousPowerMode; /*0x05 */ |
| U8 PCIeWidth; /*0x06 */ |
| U8 PCIeSpeed; /*0x07 */ |
| U32 ProcessorState; /*0x08 */ |
| U32 |
| PowerManagementCapabilities; /*0x0C */ |
| U16 IOCTemperature; /*0x10 */ |
| U8 |
| IOCTemperatureUnits; /*0x12 */ |
| U8 IOCSpeed; /*0x13 */ |
| U16 BoardTemperature; /*0x14 */ |
| U8 |
| BoardTemperatureUnits; /*0x16 */ |
| U8 Reserved3; /*0x17 */ |
| U32 BoardPowerRequirement; /*0x18 */ |
| U32 PCISlotPowerAllocation; /*0x1C */ |
| /* reserved prior to MPI v2.6 */ |
| U8 Flags; /* 0x20 */ |
| U8 Reserved6; /* 0x21 */ |
| U16 Reserved7; /* 0x22 */ |
| U32 Reserved8; /* 0x24 */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_7, |
| *PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, |
| Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t; |
| |
| #define MPI2_IOUNITPAGE7_PAGEVERSION (0x05) |
| |
| /*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */ |
| #define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0) |
| #define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00) |
| #define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40) |
| #define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80) |
| #define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0) |
| |
| #define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07) |
| #define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00) |
| #define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01) |
| #define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04) |
| #define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05) |
| #define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06) |
| |
| |
| /*defines for IO Unit Page 7 PCIeWidth field */ |
| #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) |
| #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02) |
| #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04) |
| #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08) |
| |
| /*defines for IO Unit Page 7 PCIeSpeed field */ |
| #define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00) |
| #define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01) |
| #define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02) |
| |
| /*defines for IO Unit Page 7 ProcessorState field */ |
| #define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F) |
| #define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0) |
| |
| #define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00) |
| #define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01) |
| #define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02) |
| |
| /*defines for IO Unit Page 7 PowerManagementCapabilities field */ |
| #define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000) |
| #define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000) |
| #define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000) |
| #define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000) |
| #define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000) |
| #define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000) |
| #define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000) |
| #define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000) |
| #define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000) |
| #define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400) |
| #define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200) |
| #define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100) |
| #define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040) |
| #define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020) |
| #define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010) |
| #define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008) |
| #define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004) |
| #define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002) |
| #define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001) |
| |
| /*obsolete names for the PowerManagementCapabilities bits (above) */ |
| #define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400) |
| #define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200) |
| #define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100) |
| #define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /*obsolete */ |
| #define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /*obsolete */ |
| |
| |
| /*defines for IO Unit Page 7 IOCTemperatureUnits field */ |
| #define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) |
| #define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01) |
| #define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02) |
| |
| /*defines for IO Unit Page 7 IOCSpeed field */ |
| #define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01) |
| #define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02) |
| #define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04) |
| #define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08) |
| |
| /*defines for IO Unit Page 7 BoardTemperatureUnits field */ |
| #define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00) |
| #define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) |
| #define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) |
| |
| /* defines for IO Unit Page 7 Flags field */ |
| #define MPI2_IOUNITPAGE7_FLAG_CABLE_POWER_EXC (0x01) |
| |
| /*IO Unit Page 8 */ |
| |
| #define MPI2_IOUNIT8_NUM_THRESHOLDS (4) |
| |
| typedef struct _MPI2_IOUNIT8_SENSOR { |
| U16 Flags; /*0x00 */ |
| U16 Reserved1; /*0x02 */ |
| U16 |
| Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */ |
| U32 Reserved2; /*0x0C */ |
| U32 Reserved3; /*0x10 */ |
| U32 Reserved4; /*0x14 */ |
| } MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR, |
| Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t; |
| |
| /*defines for IO Unit Page 8 Sensor Flags field */ |
| #define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008) |
| #define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004) |
| #define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002) |
| #define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumSensors at runtime. |
| */ |
| #ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES |
| #define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x04 */ |
| U32 Reserved2; /*0x08 */ |
| U8 NumSensors; /*0x0C */ |
| U8 PollingInterval; /*0x0D */ |
| U16 Reserved3; /*0x0E */ |
| MPI2_IOUNIT8_SENSOR |
| Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_8, |
| *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, |
| Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t; |
| |
| #define MPI2_IOUNITPAGE8_PAGEVERSION (0x00) |
| |
| |
| /*IO Unit Page 9 */ |
| |
| typedef struct _MPI2_IOUNIT9_SENSOR { |
| U16 CurrentTemperature; /*0x00 */ |
| U16 Reserved1; /*0x02 */ |
| U8 Flags; /*0x04 */ |
| U8 Reserved2; /*0x05 */ |
| U16 Reserved3; /*0x06 */ |
| U32 Reserved4; /*0x08 */ |
| U32 Reserved5; /*0x0C */ |
| } MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR, |
| Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t; |
| |
| /*defines for IO Unit Page 9 Sensor Flags field */ |
| #define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumSensors at runtime. |
| */ |
| #ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES |
| #define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x04 */ |
| U32 Reserved2; /*0x08 */ |
| U8 NumSensors; /*0x0C */ |
| U8 Reserved4; /*0x0D */ |
| U16 Reserved3; /*0x0E */ |
| MPI2_IOUNIT9_SENSOR |
| Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_9, |
| *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, |
| Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t; |
| |
| #define MPI2_IOUNITPAGE9_PAGEVERSION (0x00) |
| |
| |
| /*IO Unit Page 10 */ |
| |
| typedef struct _MPI2_IOUNIT10_FUNCTION { |
| U8 CreditPercent; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| } MPI2_IOUNIT10_FUNCTION, |
| *PTR_MPI2_IOUNIT10_FUNCTION, |
| Mpi2IOUnit10Function_t, |
| *pMpi2IOUnit10Function_t; |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumFunctions at runtime. |
| */ |
| #ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES |
| #define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U8 NumFunctions; /*0x04 */ |
| U8 Reserved1; /*0x05 */ |
| U16 Reserved2; /*0x06 */ |
| U32 Reserved3; /*0x08 */ |
| U32 Reserved4; /*0x0C */ |
| MPI2_IOUNIT10_FUNCTION |
| Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_10, |
| *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, |
| Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t; |
| |
| #define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) |
| |
| |
| /* IO Unit Page 11 (for MPI v2.6 and later) */ |
| |
| typedef struct _MPI26_IOUNIT11_SPINUP_GROUP { |
| U8 MaxTargetSpinup; /* 0x00 */ |
| U8 SpinupDelay; /* 0x01 */ |
| U8 SpinupFlags; /* 0x02 */ |
| U8 Reserved1; /* 0x03 */ |
| } MPI26_IOUNIT11_SPINUP_GROUP, |
| *PTR_MPI26_IOUNIT11_SPINUP_GROUP, |
| Mpi26IOUnit11SpinupGroup_t, |
| *pMpi26IOUnit11SpinupGroup_t; |
| |
| /* defines for IO Unit Page 11 SpinupFlags */ |
| #define MPI26_IOUNITPAGE11_SPINUP_DISABLE_FLAG (0x01) |
| |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * four and check the value returned for NumPhys at runtime. |
| */ |
| #ifndef MPI26_IOUNITPAGE11_PHY_MAX |
| #define MPI26_IOUNITPAGE11_PHY_MAX (4) |
| #endif |
| |
| typedef struct _MPI26_CONFIG_PAGE_IO_UNIT_11 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x04 */ |
| MPI26_IOUNIT11_SPINUP_GROUP SpinupGroupParameters[4]; /*0x08 */ |
| U32 Reserved2; /*0x18 */ |
| U32 Reserved3; /*0x1C */ |
| U32 Reserved4; /*0x20 */ |
| U8 BootDeviceWaitTime; /*0x24 */ |
| U8 Reserved5; /*0x25 */ |
| U16 Reserved6; /*0x26 */ |
| U8 NumPhys; /*0x28 */ |
| U8 PEInitialSpinupDelay; /*0x29 */ |
| U8 PEReplyDelay; /*0x2A */ |
| U8 Flags; /*0x2B */ |
| U8 PHY[MPI26_IOUNITPAGE11_PHY_MAX];/*0x2C */ |
| } MPI26_CONFIG_PAGE_IO_UNIT_11, |
| *PTR_MPI26_CONFIG_PAGE_IO_UNIT_11, |
| Mpi26IOUnitPage11_t, |
| *pMpi26IOUnitPage11_t; |
| |
| #define MPI26_IOUNITPAGE11_PAGEVERSION (0x00) |
| |
| /* defines for Flags field */ |
| #define MPI26_IOUNITPAGE11_FLAGS_AUTO_PORTENABLE (0x01) |
| |
| /* defines for PHY field */ |
| #define MPI26_IOUNITPAGE11_PHY_SPINUP_GROUP_MASK (0x03) |
| |
| |
| |
| |
| |
| |
| /**************************************************************************** |
| * IOC Config Pages |
| ****************************************************************************/ |
| |
| /*IOC Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_0 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x04 */ |
| U32 Reserved2; /*0x08 */ |
| U16 VendorID; /*0x0C */ |
| U16 DeviceID; /*0x0E */ |
| U8 RevisionID; /*0x10 */ |
| U8 Reserved3; /*0x11 */ |
| U16 Reserved4; /*0x12 */ |
| U32 ClassCode; /*0x14 */ |
| U16 SubsystemVendorID; /*0x18 */ |
| U16 SubsystemID; /*0x1A */ |
| } MPI2_CONFIG_PAGE_IOC_0, |
| *PTR_MPI2_CONFIG_PAGE_IOC_0, |
| Mpi2IOCPage0_t, *pMpi2IOCPage0_t; |
| |
| #define MPI2_IOCPAGE0_PAGEVERSION (0x02) |
| |
| |
| /*IOC Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_1 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Flags; /*0x04 */ |
| U32 CoalescingTimeout; /*0x08 */ |
| U8 CoalescingDepth; /*0x0C */ |
| U8 PCISlotNum; /*0x0D */ |
| U8 PCIBusNum; /*0x0E */ |
| U8 PCIDomainSegment; /*0x0F */ |
| U32 Reserved1; /*0x10 */ |
| U32 Reserved2; /*0x14 */ |
| } MPI2_CONFIG_PAGE_IOC_1, |
| *PTR_MPI2_CONFIG_PAGE_IOC_1, |
| Mpi2IOCPage1_t, *pMpi2IOCPage1_t; |
| |
| #define MPI2_IOCPAGE1_PAGEVERSION (0x05) |
| |
| /*defines for IOC Page 1 Flags field */ |
| #define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001) |
| |
| #define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) |
| #define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF) |
| #define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF) |
| |
| /*IOC Page 6 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_6 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 |
| CapabilitiesFlags; /*0x04 */ |
| U8 MaxDrivesRAID0; /*0x08 */ |
| U8 MaxDrivesRAID1; /*0x09 */ |
| U8 |
| MaxDrivesRAID1E; /*0x0A */ |
| U8 |
| MaxDrivesRAID10; /*0x0B */ |
| U8 MinDrivesRAID0; /*0x0C */ |
| U8 MinDrivesRAID1; /*0x0D */ |
| U8 |
| MinDrivesRAID1E; /*0x0E */ |
| U8 |
| MinDrivesRAID10; /*0x0F */ |
| U32 Reserved1; /*0x10 */ |
| U8 |
| MaxGlobalHotSpares; /*0x14 */ |
| U8 MaxPhysDisks; /*0x15 */ |
| U8 MaxVolumes; /*0x16 */ |
| U8 MaxConfigs; /*0x17 */ |
| U8 MaxOCEDisks; /*0x18 */ |
| U8 Reserved2; /*0x19 */ |
| U16 Reserved3; /*0x1A */ |
| U32 |
| SupportedStripeSizeMapRAID0; /*0x1C */ |
| U32 |
| SupportedStripeSizeMapRAID1E; /*0x20 */ |
| U32 |
| SupportedStripeSizeMapRAID10; /*0x24 */ |
| U32 Reserved4; /*0x28 */ |
| U32 Reserved5; /*0x2C */ |
| U16 |
| DefaultMetadataSize; /*0x30 */ |
| U16 Reserved6; /*0x32 */ |
| U16 |
| MaxBadBlockTableEntries; /*0x34 */ |
| U16 Reserved7; /*0x36 */ |
| U32 |
| IRNvsramVersion; /*0x38 */ |
| } MPI2_CONFIG_PAGE_IOC_6, |
| *PTR_MPI2_CONFIG_PAGE_IOC_6, |
| Mpi2IOCPage6_t, *pMpi2IOCPage6_t; |
| |
| #define MPI2_IOCPAGE6_PAGEVERSION (0x05) |
| |
| /*defines for IOC Page 6 CapabilitiesFlags */ |
| #define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020) |
| #define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) |
| #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) |
| #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) |
| #define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002) |
| #define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) |
| |
| |
| /*IOC Page 7 */ |
| |
| #define MPI2_IOCPAGE7_EVENTMASK_WORDS (4) |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_7 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x04 */ |
| U32 |
| EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */ |
| U16 SASBroadcastPrimitiveMasks; /*0x18 */ |
| U16 SASNotifyPrimitiveMasks; /*0x1A */ |
| U32 Reserved3; /*0x1C */ |
| } MPI2_CONFIG_PAGE_IOC_7, |
| *PTR_MPI2_CONFIG_PAGE_IOC_7, |
| Mpi2IOCPage7_t, *pMpi2IOCPage7_t; |
| |
| #define MPI2_IOCPAGE7_PAGEVERSION (0x02) |
| |
| |
| /*IOC Page 8 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_8 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U8 NumDevsPerEnclosure; /*0x04 */ |
| U8 Reserved1; /*0x05 */ |
| U16 Reserved2; /*0x06 */ |
| U16 MaxPersistentEntries; /*0x08 */ |
| U16 MaxNumPhysicalMappedIDs; /*0x0A */ |
| U16 Flags; /*0x0C */ |
| U16 Reserved3; /*0x0E */ |
| U16 IRVolumeMappingFlags; /*0x10 */ |
| U16 Reserved4; /*0x12 */ |
| U32 Reserved5; /*0x14 */ |
| } MPI2_CONFIG_PAGE_IOC_8, |
| *PTR_MPI2_CONFIG_PAGE_IOC_8, |
| Mpi2IOCPage8_t, *pMpi2IOCPage8_t; |
| |
| #define MPI2_IOCPAGE8_PAGEVERSION (0x00) |
| |
| /*defines for IOC Page 8 Flags field */ |
| #define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020) |
| #define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010) |
| |
| #define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E) |
| #define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000) |
| #define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002) |
| |
| #define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001) |
| #define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000) |
| |
| /*defines for IOC Page 8 IRVolumeMappingFlags */ |
| #define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003) |
| #define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000) |
| #define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001) |
| |
| |
| /**************************************************************************** |
| * BIOS Config Pages |
| ****************************************************************************/ |
| |
| /*BIOS Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 BiosOptions; /*0x04 */ |
| U32 IOCSettings; /*0x08 */ |
| U8 SSUTimeout; /*0x0C */ |
| U8 Reserved1; /*0x0D */ |
| U16 Reserved2; /*0x0E */ |
| U32 DeviceSettings; /*0x10 */ |
| U16 NumberOfDevices; /*0x14 */ |
| U16 UEFIVersion; /*0x16 */ |
| U16 IOTimeoutBlockDevicesNonRM; /*0x18 */ |
| U16 IOTimeoutSequential; /*0x1A */ |
| U16 IOTimeoutOther; /*0x1C */ |
| U16 IOTimeoutBlockDevicesRM; /*0x1E */ |
| } MPI2_CONFIG_PAGE_BIOS_1, |
| *PTR_MPI2_CONFIG_PAGE_BIOS_1, |
| Mpi2BiosPage1_t, *pMpi2BiosPage1_t; |
| |
| #define MPI2_BIOSPAGE1_PAGEVERSION (0x07) |
| |
| /*values for BIOS Page 1 BiosOptions field */ |
| #define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000) |
| #define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000) |
| |
| #define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) |
| #define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) |
| #define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000) |
| #define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800) |
| #define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000) |
| #define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800) |
| #define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000) |
| |
| #define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400) |
| |
| #define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300) |
| #define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000) |
| #define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100) |
| #define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200) |
| #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300) |
| |
| #define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) |
| #define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) |
| |
| #define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) |
| #define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) |
| #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) |
| #define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004) |
| |
| #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) |
| |
| /*values for BIOS Page 1 IOCSettings field */ |
| #define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) |
| #define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) |
| #define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) |
| |
| #define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) |
| #define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) |
| #define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) |
| #define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) |
| |
| #define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) |
| #define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) |
| #define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) |
| #define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) |
| #define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) |
| |
| #define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) |
| |
| /*values for BIOS Page 1 DeviceSettings field */ |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) |
| |
| /*defines for BIOS Page 1 UEFIVersion field */ |
| #define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00) |
| #define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8) |
| #define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF) |
| #define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0) |
| |
| |
| |
| /*BIOS Page 2 */ |
| |
| typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER { |
| U32 Reserved1; /*0x00 */ |
| U32 Reserved2; /*0x04 */ |
| U32 Reserved3; /*0x08 */ |
| U32 Reserved4; /*0x0C */ |
| U32 Reserved5; /*0x10 */ |
| U32 Reserved6; /*0x14 */ |
| } MPI2_BOOT_DEVICE_ADAPTER_ORDER, |
| *PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER, |
| Mpi2BootDeviceAdapterOrder_t, |
| *pMpi2BootDeviceAdapterOrder_t; |
| |
| typedef struct _MPI2_BOOT_DEVICE_SAS_WWID { |
| U64 SASAddress; /*0x00 */ |
| U8 LUN[8]; /*0x08 */ |
| U32 Reserved1; /*0x10 */ |
| U32 Reserved2; /*0x14 */ |
| } MPI2_BOOT_DEVICE_SAS_WWID, |
| *PTR_MPI2_BOOT_DEVICE_SAS_WWID, |
| Mpi2BootDeviceSasWwid_t, |
| *pMpi2BootDeviceSasWwid_t; |
| |
| typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT { |
| U64 EnclosureLogicalID; /*0x00 */ |
| U32 Reserved1; /*0x08 */ |
| U32 Reserved2; /*0x0C */ |
| U16 SlotNumber; /*0x10 */ |
| U16 Reserved3; /*0x12 */ |
| U32 Reserved4; /*0x14 */ |
| } MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, |
| *PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, |
| Mpi2BootDeviceEnclosureSlot_t, |
| *pMpi2BootDeviceEnclosureSlot_t; |
| |
| typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME { |
| U64 DeviceName; /*0x00 */ |
| U8 LUN[8]; /*0x08 */ |
| U32 Reserved1; /*0x10 */ |
| U32 Reserved2; /*0x14 */ |
| } MPI2_BOOT_DEVICE_DEVICE_NAME, |
| *PTR_MPI2_BOOT_DEVICE_DEVICE_NAME, |
| Mpi2BootDeviceDeviceName_t, |
| *pMpi2BootDeviceDeviceName_t; |
| |
| typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE { |
| MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; |
| MPI2_BOOT_DEVICE_SAS_WWID SasWwid; |
| MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; |
| MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName; |
| } MPI2_BIOSPAGE2_BOOT_DEVICE, |
| *PTR_MPI2_BIOSPAGE2_BOOT_DEVICE, |
| Mpi2BiosPage2BootDevice_t, |
| *pMpi2BiosPage2BootDevice_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_BIOS_2 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x04 */ |
| U32 Reserved2; /*0x08 */ |
| U32 Reserved3; /*0x0C */ |
| U32 Reserved4; /*0x10 */ |
| U32 Reserved5; /*0x14 */ |
| U32 Reserved6; /*0x18 */ |
| U8 ReqBootDeviceForm; /*0x1C */ |
| U8 Reserved7; /*0x1D */ |
| U16 Reserved8; /*0x1E */ |
| MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /*0x20 */ |
| U8 ReqAltBootDeviceForm; /*0x38 */ |
| U8 Reserved9; /*0x39 */ |
| U16 Reserved10; /*0x3A */ |
| MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /*0x3C */ |
| U8 CurrentBootDeviceForm; /*0x58 */ |
| U8 Reserved11; /*0x59 */ |
| U16 Reserved12; /*0x5A */ |
| MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /*0x58 */ |
| } MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2, |
| Mpi2BiosPage2_t, *pMpi2BiosPage2_t; |
| |
| #define MPI2_BIOSPAGE2_PAGEVERSION (0x04) |
| |
| /*values for BIOS Page 2 BootDeviceForm fields */ |
| #define MPI2_BIOSPAGE2_FORM_MASK (0x0F) |
| #define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00) |
| #define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05) |
| #define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) |
| #define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07) |
| |
| |
| /*BIOS Page 3 */ |
| |
| #define MPI2_BIOSPAGE3_NUM_ADAPTER (4) |
| |
| typedef struct _MPI2_ADAPTER_INFO { |
| U8 PciBusNumber; /*0x00 */ |
| U8 PciDeviceAndFunctionNumber; /*0x01 */ |
| U16 AdapterFlags; /*0x02 */ |
| } MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO, |
| Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t; |
| |
| #define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) |
| #define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) |
| |
| typedef struct _MPI2_ADAPTER_ORDER_AUX { |
| U64 WWID; /* 0x00 */ |
| U32 Reserved1; /* 0x08 */ |
| U32 Reserved2; /* 0x0C */ |
| } MPI2_ADAPTER_ORDER_AUX, *PTR_MPI2_ADAPTER_ORDER_AUX, |
| Mpi2AdapterOrderAux_t, *pMpi2AdapterOrderAux_t; |
| |
| |
| typedef struct _MPI2_CONFIG_PAGE_BIOS_3 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U32 GlobalFlags; /*0x04 */ |
| U32 BiosVersion; /*0x08 */ |
| MPI2_ADAPTER_INFO AdapterOrder[MPI2_BIOSPAGE3_NUM_ADAPTER]; |
| U32 Reserved1; /*0x1C */ |
| MPI2_ADAPTER_ORDER_AUX AdapterOrderAux[MPI2_BIOSPAGE3_NUM_ADAPTER]; |
| } MPI2_CONFIG_PAGE_BIOS_3, |
| *PTR_MPI2_CONFIG_PAGE_BIOS_3, |
| Mpi2BiosPage3_t, *pMpi2BiosPage3_t; |
| |
| #define MPI2_BIOSPAGE3_PAGEVERSION (0x01) |
| |
| /*values for BIOS Page 3 GlobalFlags */ |
| #define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) |
| #define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004) |
| #define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010) |
| |
| #define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) |
| #define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) |
| #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020) |
| #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) |
| |
| |
| /*BIOS Page 4 */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhys at runtime. |
| */ |
| #ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES |
| #define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) |
| #endif |
| |
| typedef struct _MPI2_BIOS4_ENTRY { |
| U64 ReassignmentWWID; /*0x00 */ |
| U64 ReassignmentDeviceName; /*0x08 */ |
| } MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY, |
| Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_BIOS_4 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U8 NumPhys; /*0x04 */ |
| U8 Reserved1; /*0x05 */ |
| U16 Reserved2; /*0x06 */ |
| MPI2_BIOS4_ENTRY |
| Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */ |
| } MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4, |
| Mpi2BiosPage4_t, *pMpi2BiosPage4_t; |
| |
| #define MPI2_BIOSPAGE4_PAGEVERSION (0x01) |
| |
| |
| /**************************************************************************** |
| * RAID Volume Config Pages |
| ****************************************************************************/ |
| |
| /*RAID Volume Page 0 */ |
| |
| typedef struct _MPI2_RAIDVOL0_PHYS_DISK { |
| U8 RAIDSetNum; /*0x00 */ |
| U8 PhysDiskMap; /*0x01 */ |
| U8 PhysDiskNum; /*0x02 */ |
| U8 Reserved; /*0x03 */ |
| } MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK, |
| Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t; |
| |
| /*defines for the PhysDiskMap field */ |
| #define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01) |
| #define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02) |
| |
| typedef struct _MPI2_RAIDVOL0_SETTINGS { |
| U16 Settings; /*0x00 */ |
| U8 HotSparePool; /*0x01 */ |
| U8 Reserved; /*0x02 */ |
| } MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS, |
| Mpi2RaidVol0Settings_t, |
| *pMpi2RaidVol0Settings_t; |
| |
| /*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ |
| #define MPI2_RAID_HOT_SPARE_POOL_0 (0x01) |
| #define MPI2_RAID_HOT_SPARE_POOL_1 (0x02) |
| #define MPI2_RAID_HOT_SPARE_POOL_2 (0x04) |
| #define MPI2_RAID_HOT_SPARE_POOL_3 (0x08) |
| #define MPI2_RAID_HOT_SPARE_POOL_4 (0x10) |
| #define MPI2_RAID_HOT_SPARE_POOL_5 (0x20) |
| #define MPI2_RAID_HOT_SPARE_POOL_6 (0x40) |
| #define MPI2_RAID_HOT_SPARE_POOL_7 (0x80) |
| |
| /*RAID Volume Page 0 VolumeSettings defines */ |
| #define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008) |
| #define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004) |
| |
| #define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003) |
| #define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000) |
| #define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001) |
| #define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhysDisks at runtime. |
| */ |
| #ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX |
| #define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U16 DevHandle; /*0x04 */ |
| U8 VolumeState; /*0x06 */ |
| U8 VolumeType; /*0x07 */ |
| U32 VolumeStatusFlags; /*0x08 */ |
| MPI2_RAIDVOL0_SETTINGS VolumeSettings; /*0x0C */ |
| U64 MaxLBA; /*0x10 */ |
| U32 StripeSize; /*0x18 */ |
| U16 BlockSize; /*0x1C */ |
| U16 Reserved1; /*0x1E */ |
| U8 SupportedPhysDisks;/*0x20 */ |
| U8 ResyncRate; /*0x21 */ |
| U16 DataScrubDuration; /*0x22 */ |
| U8 NumPhysDisks; /*0x24 */ |
| U8 Reserved2; /*0x25 */ |
| U8 Reserved3; /*0x26 */ |
| U8 InactiveStatus; /*0x27 */ |
| MPI2_RAIDVOL0_PHYS_DISK |
| PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */ |
| } MPI2_CONFIG_PAGE_RAID_VOL_0, |
| *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, |
| Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t; |
| |
| #define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A) |
| |
| /*values for RAID VolumeState */ |
| #define MPI2_RAID_VOL_STATE_MISSING (0x00) |
| #define MPI2_RAID_VOL_STATE_FAILED (0x01) |
| #define MPI2_RAID_VOL_STATE_INITIALIZING (0x02) |
| #define MPI2_RAID_VOL_STATE_ONLINE (0x03) |
| #define MPI2_RAID_VOL_STATE_DEGRADED (0x04) |
| #define MPI2_RAID_VOL_STATE_OPTIMAL (0x05) |
| |
| /*values for RAID VolumeType */ |
| #define MPI2_RAID_VOL_TYPE_RAID0 (0x00) |
| #define MPI2_RAID_VOL_TYPE_RAID1E (0x01) |
| #define MPI2_RAID_VOL_TYPE_RAID1 (0x02) |
| #define MPI2_RAID_VOL_TYPE_RAID10 (0x05) |
| #define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF) |
| |
| /*values for RAID Volume Page 0 VolumeStatusFlags field */ |
| #define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001) |
| |
| /*values for RAID Volume Page 0 SupportedPhysDisks field */ |
| #define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08) |
| #define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04) |
| #define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02) |
| #define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01) |
| |
| /*values for RAID Volume Page 0 InactiveStatus field */ |
| #define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) |
| #define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) |
| #define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) |
| #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) |
| #define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) |
| #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) |
| #define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) |
| |
| |
| /*RAID Volume Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U16 DevHandle; /*0x04 */ |
| U16 Reserved0; /*0x06 */ |
| U8 GUID[24]; /*0x08 */ |
| U8 Name[16]; /*0x20 */ |
| U64 WWID; /*0x30 */ |
| U32 Reserved1; /*0x38 */ |
| U32 Reserved2; /*0x3C */ |
| } MPI2_CONFIG_PAGE_RAID_VOL_1, |
| *PTR_MPI2_CONFIG_PAGE_RAID_VOL_1, |
| Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t; |
| |
| #define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03) |
| |
| |
| /**************************************************************************** |
| * RAID Physical Disk Config Pages |
| ****************************************************************************/ |
| |
| /*RAID Physical Disk Page 0 */ |
| |
| typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS { |
| U16 Reserved1; /*0x00 */ |
| U8 HotSparePool; /*0x02 */ |
| U8 Reserved2; /*0x03 */ |
| } MPI2_RAIDPHYSDISK0_SETTINGS, |
| *PTR_MPI2_RAIDPHYSDISK0_SETTINGS, |
| Mpi2RaidPhysDisk0Settings_t, |
| *pMpi2RaidPhysDisk0Settings_t; |
| |
| /*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */ |
| |
| typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA { |
| U8 VendorID[8]; /*0x00 */ |
| U8 ProductID[16]; /*0x08 */ |
| U8 ProductRevLevel[4]; /*0x18 */ |
| U8 SerialNum[32]; /*0x1C */ |
| } MPI2_RAIDPHYSDISK0_INQUIRY_DATA, |
| *PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA, |
| Mpi2RaidPhysDisk0InquiryData_t, |
| *pMpi2RaidPhysDisk0InquiryData_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U16 DevHandle; /*0x04 */ |
| U8 Reserved1; /*0x06 */ |
| U8 PhysDiskNum; /*0x07 */ |
| MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /*0x08 */ |
| U32 Reserved2; /*0x0C */ |
| MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /*0x10 */ |
| U32 Reserved3; /*0x4C */ |
| U8 PhysDiskState; /*0x50 */ |
| U8 OfflineReason; /*0x51 */ |
| U8 IncompatibleReason; /*0x52 */ |
| U8 PhysDiskAttributes; /*0x53 */ |
| U32 PhysDiskStatusFlags;/*0x54 */ |
| U64 DeviceMaxLBA; /*0x58 */ |
| U64 HostMaxLBA; /*0x60 */ |
| U64 CoercedMaxLBA; /*0x68 */ |
| U16 BlockSize; /*0x70 */ |
| U16 Reserved5; /*0x72 */ |
| U32 Reserved6; /*0x74 */ |
| } MPI2_CONFIG_PAGE_RD_PDISK_0, |
| *PTR_MPI2_CONFIG_PAGE_RD_PDISK_0, |
| Mpi2RaidPhysDiskPage0_t, |
| *pMpi2RaidPhysDiskPage0_t; |
| |
| #define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05) |
| |
| /*PhysDiskState defines */ |
| #define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00) |
| #define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01) |
| #define MPI2_RAID_PD_STATE_OFFLINE (0x02) |
| #define MPI2_RAID_PD_STATE_ONLINE (0x03) |
| #define MPI2_RAID_PD_STATE_HOT_SPARE (0x04) |
| #define MPI2_RAID_PD_STATE_DEGRADED (0x05) |
| #define MPI2_RAID_PD_STATE_REBUILDING (0x06) |
| #define MPI2_RAID_PD_STATE_OPTIMAL (0x07) |
| |
| /*OfflineReason defines */ |
| #define MPI2_PHYSDISK0_ONLINE (0x00) |
| #define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01) |
| #define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03) |
| #define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04) |
| #define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05) |
| #define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06) |
| #define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF) |
| |
| /*IncompatibleReason defines */ |
| #define MPI2_PHYSDISK0_COMPATIBLE (0x00) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) |
| |
| /*PhysDiskAttributes defines */ |
| #define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C) |
| #define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) |
| #define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) |
| |
| #define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03) |
| #define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) |
| #define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) |
| |
| /*PhysDiskStatusFlags defines */ |
| #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001) |
| |
| |
| /*RAID Physical Disk Page 1 */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhysDiskPaths at runtime. |
| */ |
| #ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX |
| #define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_RAIDPHYSDISK1_PATH { |
| U16 DevHandle; /*0x00 */ |
| U16 Reserved1; /*0x02 */ |
| U64 WWID; /*0x04 */ |
| U64 OwnerWWID; /*0x0C */ |
| U8 OwnerIdentifier; /*0x14 */ |
| U8 Reserved2; /*0x15 */ |
| U16 Flags; /*0x16 */ |
| } MPI2_RAIDPHYSDISK1_PATH, *PTR_MPI2_RAIDPHYSDISK1_PATH, |
| Mpi2RaidPhysDisk1Path_t, |
| *pMpi2RaidPhysDisk1Path_t; |
| |
| /*RAID Physical Disk Page 1 Physical Disk Path Flags field defines */ |
| #define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004) |
| #define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) |
| #define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001) |
| |
| typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { |
| MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ |
| U8 NumPhysDiskPaths; /*0x04 */ |
| U8 PhysDiskNum; /*0x05 */ |
| U16 Reserved1; /*0x06 */ |
| U32 Reserved2; /*0x08 */ |
| MPI2_RAIDPHYSDISK1_PATH |
| PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */ |
| } MPI2_CONFIG_PAGE_RD_PDISK_1, |
| *PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, |
| Mpi2RaidPhysDiskPage1_t, |
| *pMpi2RaidPhysDiskPage1_t; |
| |
| #define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02) |
| |
| |
| /**************************************************************************** |
| * values for fields used by several types of SAS Config Pages |
| ****************************************************************************/ |
| |
| /*values for NegotiatedLinkRates fields */ |
| #define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0) |
| #define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4) |
| #define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) |
| /*link rates used for Negotiated Physical and Logical Link Rate */ |
| #define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) |
| #define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) |
| #define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) |
| #define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) |
| #define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) |
| #define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) |
| #define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) |
| #define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) |
| #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) |
| #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) |
| #define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B) |
| |
| |
| /*values for AttachedPhyInfo fields */ |
| #define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) |
| #define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) |
| #define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) |
| |
| #define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F) |
| #define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) |
| #define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001) |
| #define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) |
| #define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) |
| #define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) |
| #define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) |
| #define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) |
| #define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) |
| #define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) |
| |
| |
| /*values for PhyInfo fields */ |
| #define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) |
| |
| #define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) |
| #define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27) |
| #define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000) |
| #define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000) |
| #define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000) |
| |
| #define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) |
| #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) |
| #define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) |
| #define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) |
| #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000) |
| #define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000) |
| |
| #define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000) |
| #define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) |
| #define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000) |
| #define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) |
| #define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) |
| #define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) |
| #define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) |
| #define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) |
| #define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) |
| #define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) |
| |
| #define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000) |
| #define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) |
| #define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) |
| #define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) |
| |
| #define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) |
| #define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) |
| |
| #define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) |
| #define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000) |
| #define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) |
| #define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020) |
| |
| |
| /*values for SAS ProgrammedLinkRate fields */ |
| #define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0) |
| #define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) |
| #define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) |
| #define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) |
| #define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) |
| #define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0) |
| #define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) |
| #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) |
| #define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) |
| #define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) |
| #define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) |
| #define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B) |
| |
| |
| /*values for SAS HwLinkRate fields */ |
| #define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0) |
| #define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) |
| #define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) |
| #define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) |
| #define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0) |
| #define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) |
| #define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) |
| #define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) |
| #define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) |
| #define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B) |
| |
| |
| |
| /**************************************************************************** |
| * SAS IO Unit Config Pages |
| ****************************************************************************/ |
| |
| /*SAS IO Unit Page 0 */ |
| |
| typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA { |
| U8 Port; /*0x00 */ |
| U8 PortFlags; /*0x01 */ |
| U8 PhyFlags; /*0x02 */ |
| U8 NegotiatedLinkRate; /*0x03 */ |
| U32 ControllerPhyDeviceInfo;/*0x04 */ |
| U16 AttachedDevHandle; /*0x08 */ |
| U16 ControllerDevHandle; /*0x0A */ |
| U32 DiscoveryStatus; /*0x0C */ |
| U32 Reserved; /*0x10 */ |
| } MPI2_SAS_IO_UNIT0_PHY_DATA, |
| *PTR_MPI2_SAS_IO_UNIT0_PHY_DATA, |
| Mpi2SasIOUnit0PhyData_t, |
| *pMpi2SasIOUnit0PhyData_t; |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhys at runtime. |
| */ |
| #ifndef MPI2_SAS_IOUNIT0_PHY_MAX |
| #define MPI2_SAS_IOUNIT0_PHY_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1;/*0x08 */ |
| U8 NumPhys; /*0x0C */ |
| U8 Reserved2;/*0x0D */ |
| U16 Reserved3;/*0x0E */ |
| MPI2_SAS_IO_UNIT0_PHY_DATA |
| PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /*0x10 */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_0, |
| *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, |
| Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t; |
| |
| #define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05) |
| |
| /*values for SAS IO Unit Page 0 PortFlags */ |
| #define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08) |
| #define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) |
| |
| /*values for SAS IO Unit Page 0 PhyFlags */ |
| #define MPI2_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) |
| #define MPI2_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) |
| #define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) |
| #define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) |
| |
| /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ |
| |
| /*see mpi2_sas.h for values for |
| *SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ |
| |
| /*values for SAS IO Unit Page 0 DiscoveryStatus */ |
| #define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) |
| #define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000) |
| #define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000) |
| #define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) |
| #define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000) |
| #define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) |
| #define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) |
| #define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) |
| #define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) |
| #define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) |
| #define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400) |
| #define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) |
| #define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100) |
| #define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) |
| #define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) |
| #define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) |
| #define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010) |
| #define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004) |
| #define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) |
| #define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001) |
| |
| |
| /*SAS IO Unit Page 1 */ |
| |
| typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA { |
| U8 Port; /*0x00 */ |
| U8 PortFlags; /*0x01 */ |
| U8 PhyFlags; /*0x02 */ |
| U8 MaxMinLinkRate; /*0x03 */ |
| U32 ControllerPhyDeviceInfo; /*0x04 */ |
| U16 MaxTargetPortConnectTime; /*0x08 */ |
| U16 Reserved1; /*0x0A */ |
| } MPI2_SAS_IO_UNIT1_PHY_DATA, |
| *PTR_MPI2_SAS_IO_UNIT1_PHY_DATA, |
| Mpi2SasIOUnit1PhyData_t, |
| *pMpi2SasIOUnit1PhyData_t; |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhys at runtime. |
| */ |
| #ifndef MPI2_SAS_IOUNIT1_PHY_MAX |
| #define MPI2_SAS_IOUNIT1_PHY_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ |
| U16 |
| ControlFlags; /*0x08 */ |
| U16 |
| SASNarrowMaxQueueDepth; /*0x0A */ |
| U16 |
| AdditionalControlFlags; /*0x0C */ |
| U16 |
| SASWideMaxQueueDepth; /*0x0E */ |
| U8 |
| NumPhys; /*0x10 */ |
| U8 |
| SATAMaxQDepth; /*0x11 */ |
| U8 |
| ReportDeviceMissingDelay; /*0x12 */ |
| U8 |
| IODeviceMissingDelay; /*0x13 */ |
| MPI2_SAS_IO_UNIT1_PHY_DATA |
| PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /*0x14 */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_1, |
| *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, |
| Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t; |
| |
| #define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09) |
| |
| /*values for SAS IO Unit Page 1 ControlFlags */ |
| #define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) |
| |
| #define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) |
| #define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) |
| #define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0) |
| #define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1) |
| #define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2) |
| |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) |
| #define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) |
| #define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) |
| #define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) |
| #define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) |
| |
| /*values for SAS IO Unit Page 1 AdditionalControlFlags */ |
| #define MPI2_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100) |
| #define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) |
| #define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) |
| #define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) |
| #define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) |
| #define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) |
| #define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) |
| #define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) |
| #define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) |
| |
| /*defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ |
| #define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) |
| #define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80) |
| |
| /*values for SAS IO Unit Page 1 PortFlags */ |
| #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) |
| |
| /*values for SAS IO Unit Page 1 PhyFlags */ |
| #define MPI2_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) |
| #define MPI2_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) |
| #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) |
| #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) |
| |
| /*values for SAS IO Unit Page 1 MaxMinLinkRate */ |
| #define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) |
| #define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) |
| #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) |
| #define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) |
| #define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0) |
| #define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) |
| #define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) |
| #define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) |
| #define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) |
| #define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B) |
| |
| /*see mpi2_sas.h for values for |
| *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ |
| |
| |
| /*SAS IO Unit Page 4 (for MPI v2.5 and earlier) */ |
| |
| typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP { |
| U8 MaxTargetSpinup; /*0x00 */ |
| U8 SpinupDelay; /*0x01 */ |
| U8 SpinupFlags; /*0x02 */ |
| U8 Reserved1; /*0x03 */ |
| } MPI2_SAS_IOUNIT4_SPINUP_GROUP, |
| *PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, |
| Mpi2SasIOUnit4SpinupGroup_t, |
| *pMpi2SasIOUnit4SpinupGroup_t; |
| /*defines for SAS IO Unit Page 4 SpinupFlags */ |
| #define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01) |
| |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhys at runtime. |
| */ |
| #ifndef MPI2_SAS_IOUNIT4_PHY_MAX |
| #define MPI2_SAS_IOUNIT4_PHY_MAX (4) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header;/*0x00 */ |
| MPI2_SAS_IOUNIT4_SPINUP_GROUP |
| SpinupGroupParameters[4]; /*0x08 */ |
| U32 |
| Reserved1; /*0x18 */ |
| U32 |
| Reserved2; /*0x1C */ |
| U32 |
| Reserved3; /*0x20 */ |
| U8 |
| BootDeviceWaitTime; /*0x24 */ |
| U8 |
| SATADeviceWaitTime; /*0x25 */ |
| U16 |
| Reserved5; /*0x26 */ |
| U8 |
| NumPhys; /*0x28 */ |
| U8 |
| PEInitialSpinupDelay; /*0x29 */ |
| U8 |
| PEReplyDelay; /*0x2A */ |
| U8 |
| Flags; /*0x2B */ |
| U8 |
| PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /*0x2C */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_4, |
| *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4, |
| Mpi2SasIOUnitPage4_t, *pMpi2SasIOUnitPage4_t; |
| |
| #define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02) |
| |
| /*defines for Flags field */ |
| #define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01) |
| |
| /*defines for PHY field */ |
| #define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) |
| |
| |
| /*SAS IO Unit Page 5 */ |
| |
| typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { |
| U8 ControlFlags; /*0x00 */ |
| U8 PortWidthModGroup; /*0x01 */ |
| U16 InactivityTimerExponent; /*0x02 */ |
| U8 SATAPartialTimeout; /*0x04 */ |
| U8 Reserved2; /*0x05 */ |
| U8 SATASlumberTimeout; /*0x06 */ |
| U8 Reserved3; /*0x07 */ |
| U8 SASPartialTimeout; /*0x08 */ |
| U8 Reserved4; /*0x09 */ |
| U8 SASSlumberTimeout; /*0x0A */ |
| U8 Reserved5; /*0x0B */ |
| } MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, |
| *PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, |
| Mpi2SasIOUnit5PhyPmSettings_t, |
| *pMpi2SasIOUnit5PhyPmSettings_t; |
| |
| /*defines for ControlFlags field */ |
| #define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08) |
| #define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04) |
| #define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02) |
| #define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01) |
| |
| /*defines for PortWidthModeGroup field */ |
| #define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF) |
| |
| /*defines for InactivityTimerExponent field */ |
| #define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000) |
| #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12) |
| #define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700) |
| #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8) |
| #define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070) |
| #define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4) |
| #define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007) |
| #define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0) |
| |
| #define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7) |
| #define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6) |
| #define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5) |
| #define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4) |
| #define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3) |
| #define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2) |
| #define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1) |
| #define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0) |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhys at runtime. |
| */ |
| #ifndef MPI2_SAS_IOUNIT5_PHY_MAX |
| #define MPI2_SAS_IOUNIT5_PHY_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ |
| U8 NumPhys; /*0x08 */ |
| U8 Reserved1;/*0x09 */ |
| U16 Reserved2;/*0x0A */ |
| U32 Reserved3;/*0x0C */ |
| MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS |
| SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_5, |
| *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, |
| Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t; |
| |
| #define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01) |
| |
| |
| /*SAS IO Unit Page 6 */ |
| |
| typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS { |
| U8 CurrentStatus; /*0x00 */ |
| U8 CurrentModulation; /*0x01 */ |
| U8 CurrentUtilization; /*0x02 */ |
| U8 Reserved1; /*0x03 */ |
| U32 Reserved2; /*0x04 */ |
| } MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, |
| *PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, |
| Mpi2SasIOUnit6PortWidthModGroupStatus_t, |
| *pMpi2SasIOUnit6PortWidthModGroupStatus_t; |
| |
| /*defines for CurrentStatus field */ |
| #define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00) |
| #define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01) |
| #define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02) |
| #define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03) |
| #define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04) |
| #define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05) |
| #define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06) |
| #define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07) |
| |
| /*defines for CurrentModulation field */ |
| #define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00) |
| #define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01) |
| #define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02) |
| #define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumGroups at runtime. |
| */ |
| #ifndef MPI2_SAS_IOUNIT6_GROUP_MAX |
| #define MPI2_SAS_IOUNIT6_GROUP_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x08 */ |
| U32 Reserved2; /*0x0C */ |
| U8 NumGroups; /*0x10 */ |
| U8 Reserved3; /*0x11 */ |
| U16 Reserved4; /*0x12 */ |
| MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS |
| PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_6, |
| *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, |
| Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t; |
| |
| #define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00) |
| |
| |
| /*SAS IO Unit Page 7 */ |
| |
| typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS { |
| U8 Flags; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| U8 Threshold75Pct; /*0x04 */ |
| U8 Threshold50Pct; /*0x05 */ |
| U8 Threshold25Pct; /*0x06 */ |
| U8 Reserved3; /*0x07 */ |
| } MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, |
| *PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, |
| Mpi2SasIOUnit7PortWidthModGroupSettings_t, |
| *pMpi2SasIOUnit7PortWidthModGroupSettings_t; |
| |
| /*defines for Flags field */ |
| #define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01) |
| |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumGroups at runtime. |
| */ |
| #ifndef MPI2_SAS_IOUNIT7_GROUP_MAX |
| #define MPI2_SAS_IOUNIT7_GROUP_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ |
| U8 SamplingInterval; /*0x08 */ |
| U8 WindowLength; /*0x09 */ |
| U16 Reserved1; /*0x0A */ |
| U32 Reserved2; /*0x0C */ |
| U32 Reserved3; /*0x10 */ |
| U8 NumGroups; /*0x14 */ |
| U8 Reserved4; /*0x15 */ |
| U16 Reserved5; /*0x16 */ |
| MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS |
| PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_7, |
| *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, |
| Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t; |
| |
| #define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00) |
| |
| |
| /*SAS IO Unit Page 8 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U32 |
| Reserved1; /*0x08 */ |
| U32 |
| PowerManagementCapabilities; /*0x0C */ |
| U8 |
| TxRxSleepStatus; /*0x10 */ |
| U8 |
| Reserved2; /*0x11 */ |
| U16 |
| Reserved3; /*0x12 */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_8, |
| *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8, |
| Mpi2SasIOUnitPage8_t, *pMpi2SasIOUnitPage8_t; |
| |
| #define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) |
| |
| /*defines for PowerManagementCapabilities field */ |
| #define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000) |
| #define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800) |
| #define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400) |
| #define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200) |
| #define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100) |
| #define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010) |
| #define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) |
| #define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) |
| #define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) |
| #define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) |
| |
| /*defines for TxRxSleepStatus field */ |
| #define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED (0x00) |
| #define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED (0x01) |
| #define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE (0x02) |
| #define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN (0x03) |
| |
| |
| |
| /*SAS IO Unit Page 16 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U64 |
| TimeStamp; /*0x08 */ |
| U32 |
| Reserved1; /*0x10 */ |
| U32 |
| Reserved2; /*0x14 */ |
| U32 |
| FastPathPendedRequests; /*0x18 */ |
| U32 |
| FastPathUnPendedRequests; /*0x1C */ |
| U32 |
| FastPathHostRequestStarts; /*0x20 */ |
| U32 |
| FastPathFirmwareRequestStarts; /*0x24 */ |
| U32 |
| FastPathHostCompletions; /*0x28 */ |
| U32 |
| FastPathFirmwareCompletions; /*0x2C */ |
| U32 |
| NonFastPathRequestStarts; /*0x30 */ |
| U32 |
| NonFastPathHostCompletions; /*0x30 */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT16, |
| *PTR_MPI2_CONFIG_PAGE_SASIOUNIT16, |
| Mpi2SasIOUnitPage16_t, *pMpi2SasIOUnitPage16_t; |
| |
| #define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00) |
| |
| |
| /**************************************************************************** |
| * SAS Expander Config Pages |
| ****************************************************************************/ |
| |
| /*SAS Expander Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U8 |
| PhysicalPort; /*0x08 */ |
| U8 |
| ReportGenLength; /*0x09 */ |
| U16 |
| EnclosureHandle; /*0x0A */ |
| U64 |
| SASAddress; /*0x0C */ |
| U32 |
| DiscoveryStatus; /*0x14 */ |
| U16 |
| DevHandle; /*0x18 */ |
| U16 |
| ParentDevHandle; /*0x1A */ |
| U16 |
| ExpanderChangeCount; /*0x1C */ |
| U16 |
| ExpanderRouteIndexes; /*0x1E */ |
| U8 |
| NumPhys; /*0x20 */ |
| U8 |
| SASLevel; /*0x21 */ |
| U16 |
| Flags; /*0x22 */ |
| U16 |
| STPBusInactivityTimeLimit; /*0x24 */ |
| U16 |
| STPMaxConnectTimeLimit; /*0x26 */ |
| U16 |
| STP_SMP_NexusLossTime; /*0x28 */ |
| U16 |
| MaxNumRoutedSasAddresses; /*0x2A */ |
| U64 |
| ActiveZoneManagerSASAddress;/*0x2C */ |
| U16 |
| ZoneLockInactivityLimit; /*0x34 */ |
| U16 |
| Reserved1; /*0x36 */ |
| U8 |
| TimeToReducedFunc; /*0x38 */ |
| U8 |
| InitialTimeToReducedFunc; /*0x39 */ |
| U8 |
| MaxReducedFuncTime; /*0x3A */ |
| U8 |
| Reserved2; /*0x3B */ |
| } MPI2_CONFIG_PAGE_EXPANDER_0, |
| *PTR_MPI2_CONFIG_PAGE_EXPANDER_0, |
| Mpi2ExpanderPage0_t, *pMpi2ExpanderPage0_t; |
| |
| #define MPI2_SASEXPANDER0_PAGEVERSION (0x06) |
| |
| /*values for SAS Expander Page 0 DiscoveryStatus field */ |
| #define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) |
| #define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000) |
| #define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000) |
| #define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) |
| #define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000) |
| #define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) |
| #define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) |
| #define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000) |
| #define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) |
| #define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) |
| #define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) |
| #define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) |
| #define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) |
| #define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) |
| #define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) |
| #define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) |
| #define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) |
| #define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) |
| #define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) |
| #define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) |
| |
| /*values for SAS Expander Page 0 Flags field */ |
| #define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) |
| #define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) |
| #define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) |
| #define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) |
| #define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) |
| #define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100) |
| #define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) |
| #define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) |
| #define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) |
| #define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) |
| #define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) |
| |
| |
| /*SAS Expander Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U8 |
| PhysicalPort; /*0x08 */ |
| U8 |
| Reserved1; /*0x09 */ |
| U16 |
| Reserved2; /*0x0A */ |
| U8 |
| NumPhys; /*0x0C */ |
| U8 |
| Phy; /*0x0D */ |
| U16 |
| NumTableEntriesProgrammed; /*0x0E */ |
| U8 |
| ProgrammedLinkRate; /*0x10 */ |
| U8 |
| HwLinkRate; /*0x11 */ |
| U16 |
| AttachedDevHandle; /*0x12 */ |
| U32 |
| PhyInfo; /*0x14 */ |
| U32 |
| AttachedDeviceInfo; /*0x18 */ |
| U16 |
| ExpanderDevHandle; /*0x1C */ |
| U8 |
| ChangeCount; /*0x1E */ |
| U8 |
| NegotiatedLinkRate; /*0x1F */ |
| U8 |
| PhyIdentifier; /*0x20 */ |
| U8 |
| AttachedPhyIdentifier; /*0x21 */ |
| U8 |
| Reserved3; /*0x22 */ |
| U8 |
| DiscoveryInfo; /*0x23 */ |
| U32 |
| AttachedPhyInfo; /*0x24 */ |
| U8 |
| ZoneGroup; /*0x28 */ |
| U8 |
| SelfConfigStatus; /*0x29 */ |
| U16 |
| Reserved4; /*0x2A */ |
| } MPI2_CONFIG_PAGE_EXPANDER_1, |
| *PTR_MPI2_CONFIG_PAGE_EXPANDER_1, |
| Mpi2ExpanderPage1_t, *pMpi2ExpanderPage1_t; |
| |
| #define MPI2_SASEXPANDER1_PAGEVERSION (0x02) |
| |
| /*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ |
| |
| /*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ |
| |
| /*use MPI2_SAS_PHYINFO_ for the PhyInfo field */ |
| |
| /*see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines |
| *used for the AttachedDeviceInfo field */ |
| |
| /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ |
| |
| /*values for SAS Expander Page 1 DiscoveryInfo field */ |
| #define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) |
| #define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) |
| #define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) |
| |
| /*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ |
| |
| |
| /**************************************************************************** |
| * SAS Device Config Pages |
| ****************************************************************************/ |
| |
| /*SAS Device Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U16 |
| Slot; /*0x08 */ |
| U16 |
| EnclosureHandle; /*0x0A */ |
| U64 |
| SASAddress; /*0x0C */ |
| U16 |
| ParentDevHandle; /*0x14 */ |
| U8 |
| PhyNum; /*0x16 */ |
| U8 |
| AccessStatus; /*0x17 */ |
| U16 |
| DevHandle; /*0x18 */ |
| U8 |
| AttachedPhyIdentifier; /*0x1A */ |
| U8 |
| ZoneGroup; /*0x1B */ |
| U32 |
| DeviceInfo; /*0x1C */ |
| U16 |
| Flags; /*0x20 */ |
| U8 |
| PhysicalPort; /*0x22 */ |
| U8 |
| MaxPortConnections; /*0x23 */ |
| U64 |
| DeviceName; /*0x24 */ |
| U8 |
| PortGroups; /*0x2C */ |
| U8 |
| DmaGroup; /*0x2D */ |
| U8 |
| ControlGroup; /*0x2E */ |
| U8 |
| EnclosureLevel; /*0x2F */ |
| U32 |
| ConnectorName[4]; /*0x30 */ |
| U32 |
| Reserved3; /*0x34 */ |
| } MPI2_CONFIG_PAGE_SAS_DEV_0, |
| *PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, |
| Mpi2SasDevicePage0_t, |
| *pMpi2SasDevicePage0_t; |
| |
| #define MPI2_SASDEVICE0_PAGEVERSION (0x09) |
| |
| /*values for SAS Device Page 0 AccessStatus field */ |
| #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) |
| #define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06) |
| #define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07) |
| /*specific values for SATA Init failures */ |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) |
| |
| /*see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ |
| |
| /*values for SAS Device Page 0 Flags field */ |
| #define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) |
| #define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH (0x4000) |
| #define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE (0x2000) |
| #define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000) |
| #define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) |
| #define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) |
| #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) |
| #define MPI2_SAS_DEVICE0_FLAGS_PERSIST_CAPABLE (0x0004) |
| #define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002) |
| #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) |
| |
| |
| /*SAS Device Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U32 |
| Reserved1; /*0x08 */ |
| U64 |
| SASAddress; /*0x0C */ |
| U32 |
| Reserved2; /*0x14 */ |
| U16 |
| DevHandle; /*0x18 */ |
| U16 |
| Reserved3; /*0x1A */ |
| U8 |
| InitialRegDeviceFIS[20];/*0x1C */ |
| } MPI2_CONFIG_PAGE_SAS_DEV_1, |
| *PTR_MPI2_CONFIG_PAGE_SAS_DEV_1, |
| Mpi2SasDevicePage1_t, |
| *pMpi2SasDevicePage1_t; |
| |
| #define MPI2_SASDEVICE1_PAGEVERSION (0x01) |
| |
| |
| /**************************************************************************** |
| * SAS PHY Config Pages |
| ****************************************************************************/ |
| |
| /*SAS PHY Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U16 |
| OwnerDevHandle; /*0x08 */ |
| U16 |
| Reserved1; /*0x0A */ |
| U16 |
| AttachedDevHandle; /*0x0C */ |
| U8 |
| AttachedPhyIdentifier; /*0x0E */ |
| U8 |
| Reserved2; /*0x0F */ |
| U32 |
| AttachedPhyInfo; /*0x10 */ |
| U8 |
| ProgrammedLinkRate; /*0x14 */ |
| U8 |
| HwLinkRate; /*0x15 */ |
| U8 |
| ChangeCount; /*0x16 */ |
| U8 |
| Flags; /*0x17 */ |
| U32 |
| PhyInfo; /*0x18 */ |
| U8 |
| NegotiatedLinkRate; /*0x1C */ |
| U8 |
| Reserved3; /*0x1D */ |
| U16 |
| Reserved4; /*0x1E */ |
| } MPI2_CONFIG_PAGE_SAS_PHY_0, |
| *PTR_MPI2_CONFIG_PAGE_SAS_PHY_0, |
| Mpi2SasPhyPage0_t, *pMpi2SasPhyPage0_t; |
| |
| #define MPI2_SASPHY0_PAGEVERSION (0x03) |
| |
| /*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ |
| |
| /*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ |
| |
| /*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ |
| |
| /*values for SAS PHY Page 0 Flags field */ |
| #define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) |
| |
| /*use MPI2_SAS_PHYINFO_ for the PhyInfo field */ |
| |
| /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ |
| |
| |
| /*SAS PHY Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U32 |
| Reserved1; /*0x08 */ |
| U32 |
| InvalidDwordCount; /*0x0C */ |
| U32 |
| RunningDisparityErrorCount; /*0x10 */ |
| U32 |
| LossDwordSynchCount; /*0x14 */ |
| U32 |
| PhyResetProblemCount; /*0x18 */ |
| } MPI2_CONFIG_PAGE_SAS_PHY_1, |
| *PTR_MPI2_CONFIG_PAGE_SAS_PHY_1, |
| Mpi2SasPhyPage1_t, *pMpi2SasPhyPage1_t; |
| |
| #define MPI2_SASPHY1_PAGEVERSION (0x01) |
| |
| |
| /*SAS PHY Page 2 */ |
| |
| typedef struct _MPI2_SASPHY2_PHY_EVENT { |
| U8 PhyEventCode; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| U32 PhyEventInfo; /*0x04 */ |
| } MPI2_SASPHY2_PHY_EVENT, *PTR_MPI2_SASPHY2_PHY_EVENT, |
| Mpi2SasPhy2PhyEvent_t, *pMpi2SasPhy2PhyEvent_t; |
| |
| /*use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */ |
| |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhyEvents at runtime. |
| */ |
| #ifndef MPI2_SASPHY2_PHY_EVENT_MAX |
| #define MPI2_SASPHY2_PHY_EVENT_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U32 |
| Reserved1; /*0x08 */ |
| U8 |
| NumPhyEvents; /*0x0C */ |
| U8 |
| Reserved2; /*0x0D */ |
| U16 |
| Reserved3; /*0x0E */ |
| MPI2_SASPHY2_PHY_EVENT |
| PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */ |
| } MPI2_CONFIG_PAGE_SAS_PHY_2, |
| *PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, |
| Mpi2SasPhyPage2_t, |
| *pMpi2SasPhyPage2_t; |
| |
| #define MPI2_SASPHY2_PAGEVERSION (0x00) |
| |
| |
| /*SAS PHY Page 3 */ |
| |
| typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { |
| U8 PhyEventCode; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| U8 CounterType; /*0x04 */ |
| U8 ThresholdWindow; /*0x05 */ |
| U8 TimeUnits; /*0x06 */ |
| U8 Reserved3; /*0x07 */ |
| U32 EventThreshold; /*0x08 */ |
| U16 ThresholdFlags; /*0x0C */ |
| U16 Reserved4; /*0x0E */ |
| } MPI2_SASPHY3_PHY_EVENT_CONFIG, |
| *PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG, |
| Mpi2SasPhy3PhyEventConfig_t, |
| *pMpi2SasPhy3PhyEventConfig_t; |
| |
| /*values for PhyEventCode field */ |
| #define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00) |
| #define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) |
| #define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) |
| #define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) |
| #define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) |
| #define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) |
| #define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) |
| #define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) |
| #define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28) |
| #define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) |
| #define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A) |
| #define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) |
| #define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) |
| #define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) |
| #define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) |
| #define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) |
| #define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) |
| #define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) |
| #define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) |
| #define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) |
| #define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) |
| #define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) |
| #define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) |
| #define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) |
| |
| /*Following codes are product specific and in MPI v2.6 and later */ |
| #define MPI2_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3) |
| #define MPI2_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4) |
| #define MPI2_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5) |
| #define MPI2_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6) |
| #define MPI2_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7) |
| #define MPI2_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8) |
| #define MPI2_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9) |
| #define MPI2_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA) |
| #define MPI2_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB) |
| #define MPI2_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC) |
| |
| |
| /*values for the CounterType field */ |
| #define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) |
| #define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) |
| #define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) |
| |
| /*values for the TimeUnits field */ |
| #define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) |
| #define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) |
| #define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) |
| #define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) |
| |
| /*values for the ThresholdFlags field */ |
| #define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002) |
| #define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumPhyEvents at runtime. |
| */ |
| #ifndef MPI2_SASPHY3_PHY_EVENT_MAX |
| #define MPI2_SASPHY3_PHY_EVENT_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U32 |
| Reserved1; /*0x08 */ |
| U8 |
| NumPhyEvents; /*0x0C */ |
| U8 |
| Reserved2; /*0x0D */ |
| U16 |
| Reserved3; /*0x0E */ |
| MPI2_SASPHY3_PHY_EVENT_CONFIG |
| PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */ |
| } MPI2_CONFIG_PAGE_SAS_PHY_3, |
| *PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, |
| Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t; |
| |
| #define MPI2_SASPHY3_PAGEVERSION (0x00) |
| |
| |
| /*SAS PHY Page 4 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U16 |
| Reserved1; /*0x08 */ |
| U8 |
| Reserved2; /*0x0A */ |
| U8 |
| Flags; /*0x0B */ |
| U8 |
| InitialFrame[28]; /*0x0C */ |
| } MPI2_CONFIG_PAGE_SAS_PHY_4, |
| *PTR_MPI2_CONFIG_PAGE_SAS_PHY_4, |
| Mpi2SasPhyPage4_t, *pMpi2SasPhyPage4_t; |
| |
| #define MPI2_SASPHY4_PAGEVERSION (0x00) |
| |
| /*values for the Flags field */ |
| #define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02) |
| #define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01) |
| |
| |
| |
| |
| /**************************************************************************** |
| * SAS Port Config Pages |
| ****************************************************************************/ |
| |
| /*SAS Port Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U8 |
| PortNumber; /*0x08 */ |
| U8 |
| PhysicalPort; /*0x09 */ |
| U8 |
| PortWidth; /*0x0A */ |
| U8 |
| PhysicalPortWidth; /*0x0B */ |
| U8 |
| ZoneGroup; /*0x0C */ |
| U8 |
| Reserved1; /*0x0D */ |
| U16 |
| Reserved2; /*0x0E */ |
| U64 |
| SASAddress; /*0x10 */ |
| U32 |
| DeviceInfo; /*0x18 */ |
| U32 |
| Reserved3; /*0x1C */ |
| U32 |
| Reserved4; /*0x20 */ |
| } MPI2_CONFIG_PAGE_SAS_PORT_0, |
| *PTR_MPI2_CONFIG_PAGE_SAS_PORT_0, |
| Mpi2SasPortPage0_t, *pMpi2SasPortPage0_t; |
| |
| #define MPI2_SASPORT0_PAGEVERSION (0x00) |
| |
| /*see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */ |
| |
| |
| /**************************************************************************** |
| * SAS Enclosure Config Pages |
| ****************************************************************************/ |
| |
| /*SAS Enclosure Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U32 |
| Reserved1; /*0x08 */ |
| U64 |
| EnclosureLogicalID; /*0x0C */ |
| U16 |
| Flags; /*0x14 */ |
| U16 |
| EnclosureHandle; /*0x16 */ |
| U16 |
| NumSlots; /*0x18 */ |
| U16 |
| StartSlot; /*0x1A */ |
| U8 |
| Reserved2; /*0x1C */ |
| U8 |
| EnclosureLevel; /*0x1D */ |
| U16 |
| SEPDevHandle; /*0x1E */ |
| U32 |
| Reserved3; /*0x20 */ |
| U32 |
| Reserved4; /*0x24 */ |
| } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, |
| *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, |
| Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t; |
| |
| #define MPI2_SASENCLOSURE0_PAGEVERSION (0x04) |
| |
| /*values for SAS Enclosure Page 0 Flags field */ |
| #define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) |
| |
| |
| /**************************************************************************** |
| * Log Config Page |
| ****************************************************************************/ |
| |
| /*Log Page 0 */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumLogEntries at runtime. |
| */ |
| #ifndef MPI2_LOG_0_NUM_LOG_ENTRIES |
| #define MPI2_LOG_0_NUM_LOG_ENTRIES (1) |
| #endif |
| |
| #define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) |
| |
| typedef struct _MPI2_LOG_0_ENTRY { |
| U64 TimeStamp; /*0x00 */ |
| U32 Reserved1; /*0x08 */ |
| U16 LogSequence; /*0x0C */ |
| U16 LogEntryQualifier; /*0x0E */ |
| U8 VP_ID; /*0x10 */ |
| U8 VF_ID; /*0x11 */ |
| U16 Reserved2; /*0x12 */ |
| U8 |
| LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/*0x14 */ |
| } MPI2_LOG_0_ENTRY, *PTR_MPI2_LOG_0_ENTRY, |
| Mpi2Log0Entry_t, *pMpi2Log0Entry_t; |
| |
| /*values for Log Page 0 LogEntry LogEntryQualifier field */ |
| #define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) |
| #define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) |
| #define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002) |
| #define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000) |
| #define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF) |
| |
| typedef struct _MPI2_CONFIG_PAGE_LOG_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ |
| U32 Reserved1; /*0x08 */ |
| U32 Reserved2; /*0x0C */ |
| U16 NumLogEntries;/*0x10 */ |
| U16 Reserved3; /*0x12 */ |
| MPI2_LOG_0_ENTRY |
| LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */ |
| } MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0, |
| Mpi2LogPage0_t, *pMpi2LogPage0_t; |
| |
| #define MPI2_LOG_0_PAGEVERSION (0x02) |
| |
| |
| /**************************************************************************** |
| * RAID Config Page |
| ****************************************************************************/ |
| |
| /*RAID Page 0 */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check the value returned for NumElements at runtime. |
| */ |
| #ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS |
| #define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) |
| #endif |
| |
| typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT { |
| U16 ElementFlags; /*0x00 */ |
| U16 VolDevHandle; /*0x02 */ |
| U8 HotSparePool; /*0x04 */ |
| U8 PhysDiskNum; /*0x05 */ |
| U16 PhysDiskDevHandle; /*0x06 */ |
| } MPI2_RAIDCONFIG0_CONFIG_ELEMENT, |
| *PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT, |
| Mpi2RaidConfig0ConfigElement_t, |
| *pMpi2RaidConfig0ConfigElement_t; |
| |
| /*values for the ElementFlags field */ |
| #define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F) |
| #define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000) |
| #define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001) |
| #define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002) |
| #define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003) |
| |
| |
| typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ |
| U8 NumHotSpares; /*0x08 */ |
| U8 NumPhysDisks; /*0x09 */ |
| U8 NumVolumes; /*0x0A */ |
| U8 ConfigNum; /*0x0B */ |
| U32 Flags; /*0x0C */ |
| U8 ConfigGUID[24]; /*0x10 */ |
| U32 Reserved1; /*0x28 */ |
| U8 NumElements; /*0x2C */ |
| U8 Reserved2; /*0x2D */ |
| U16 Reserved3; /*0x2E */ |
| MPI2_RAIDCONFIG0_CONFIG_ELEMENT |
| ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */ |
| } MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, |
| *PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, |
| Mpi2RaidConfigurationPage0_t, |
| *pMpi2RaidConfigurationPage0_t; |
| |
| #define MPI2_RAIDCONFIG0_PAGEVERSION (0x00) |
| |
| /*values for RAID Configuration Page 0 Flags field */ |
| #define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001) |
| |
| |
| /**************************************************************************** |
| * Driver Persistent Mapping Config Pages |
| ****************************************************************************/ |
| |
| /*Driver Persistent Mapping Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY { |
| U64 PhysicalIdentifier; /*0x00 */ |
| U16 MappingInformation; /*0x08 */ |
| U16 DeviceIndex; /*0x0A */ |
| U32 PhysicalBitsMapping; /*0x0C */ |
| U32 Reserved1; /*0x10 */ |
| } MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, |
| *PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, |
| Mpi2DriverMap0Entry_t, *pMpi2DriverMap0Entry_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ |
| MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /*0x08 */ |
| } MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, |
| *PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, |
| Mpi2DriverMappingPage0_t, *pMpi2DriverMappingPage0_t; |
| |
| #define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00) |
| |
| /*values for Driver Persistent Mapping Page 0 MappingInformation field */ |
| #define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0) |
| #define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4) |
| #define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) |
| |
| |
| /**************************************************************************** |
| * Ethernet Config Pages |
| ****************************************************************************/ |
| |
| /*Ethernet Page 0 */ |
| |
| /*IP address (union of IPv4 and IPv6) */ |
| typedef union _MPI2_ETHERNET_IP_ADDR { |
| U32 IPv4Addr; |
| U32 IPv6Addr[4]; |
| } MPI2_ETHERNET_IP_ADDR, *PTR_MPI2_ETHERNET_IP_ADDR, |
| Mpi2EthernetIpAddr_t, *pMpi2EthernetIpAddr_t; |
| |
| #define MPI2_ETHERNET_HOST_NAME_LENGTH (32) |
| |
| typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ |
| U8 NumInterfaces; /*0x08 */ |
| U8 Reserved0; /*0x09 */ |
| U16 Reserved1; /*0x0A */ |
| U32 Status; /*0x0C */ |
| U8 MediaState; /*0x10 */ |
| U8 Reserved2; /*0x11 */ |
| U16 Reserved3; /*0x12 */ |
| U8 MacAddress[6]; /*0x14 */ |
| U8 Reserved4; /*0x1A */ |
| U8 Reserved5; /*0x1B */ |
| MPI2_ETHERNET_IP_ADDR IpAddress; /*0x1C */ |
| MPI2_ETHERNET_IP_ADDR SubnetMask; /*0x2C */ |
| MPI2_ETHERNET_IP_ADDR GatewayIpAddress;/*0x3C */ |
| MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /*0x4C */ |
| MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /*0x5C */ |
| MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /*0x6C */ |
| U8 |
| HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */ |
| } MPI2_CONFIG_PAGE_ETHERNET_0, |
| *PTR_MPI2_CONFIG_PAGE_ETHERNET_0, |
| Mpi2EthernetPage0_t, *pMpi2EthernetPage0_t; |
| |
| #define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00) |
| |
| /*values for Ethernet Page 0 Status field */ |
| #define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000) |
| #define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000) |
| #define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000) |
| #define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100) |
| #define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080) |
| #define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040) |
| #define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020) |
| #define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010) |
| #define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008) |
| #define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004) |
| #define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002) |
| #define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001) |
| |
| /*values for Ethernet Page 0 MediaState field */ |
| #define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80) |
| #define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00) |
| #define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80) |
| |
| #define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07) |
| #define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00) |
| #define MPI2_ETHPG0_MS_10MBIT (0x01) |
| #define MPI2_ETHPG0_MS_100MBIT (0x02) |
| #define MPI2_ETHPG0_MS_1GBIT (0x03) |
| |
| |
| /*Ethernet Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U32 |
| Reserved0; /*0x08 */ |
| U32 |
| Flags; /*0x0C */ |
| U8 |
| MediaState; /*0x10 */ |
| U8 |
| Reserved1; /*0x11 */ |
| U16 |
| Reserved2; /*0x12 */ |
| U8 |
| MacAddress[6]; /*0x14 */ |
| U8 |
| Reserved3; /*0x1A */ |
| U8 |
| Reserved4; /*0x1B */ |
| MPI2_ETHERNET_IP_ADDR |
| StaticIpAddress; /*0x1C */ |
| MPI2_ETHERNET_IP_ADDR |
| StaticSubnetMask; /*0x2C */ |
| MPI2_ETHERNET_IP_ADDR |
| StaticGatewayIpAddress; /*0x3C */ |
| MPI2_ETHERNET_IP_ADDR |
| StaticDNS1IpAddress; /*0x4C */ |
| MPI2_ETHERNET_IP_ADDR |
| StaticDNS2IpAddress; /*0x5C */ |
| U32 |
| Reserved5; /*0x6C */ |
| U32 |
| Reserved6; /*0x70 */ |
| U32 |
| Reserved7; /*0x74 */ |
| U32 |
| Reserved8; /*0x78 */ |
| U8 |
| HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */ |
| } MPI2_CONFIG_PAGE_ETHERNET_1, |
| *PTR_MPI2_CONFIG_PAGE_ETHERNET_1, |
| Mpi2EthernetPage1_t, *pMpi2EthernetPage1_t; |
| |
| #define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00) |
| |
| /*values for Ethernet Page 1 Flags field */ |
| #define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100) |
| #define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080) |
| #define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040) |
| #define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020) |
| #define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010) |
| #define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008) |
| #define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004) |
| #define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002) |
| #define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001) |
| |
| /*values for Ethernet Page 1 MediaState field */ |
| #define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80) |
| #define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00) |
| #define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80) |
| |
| #define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07) |
| #define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00) |
| #define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01) |
| #define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02) |
| #define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03) |
| |
| |
| /**************************************************************************** |
| * Extended Manufacturing Config Pages |
| ****************************************************************************/ |
| |
| /* |
| *Generic structure to use for product-specific extended manufacturing pages |
| *(currently Extended Manufacturing Page 40 through Extended Manufacturing |
| *Page 60). |
| */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| Header; /*0x00 */ |
| U32 |
| ProductSpecificInfo; /*0x08 */ |
| } MPI2_CONFIG_PAGE_EXT_MAN_PS, |
| *PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS, |
| Mpi2ExtManufacturingPagePS_t, |
| *pMpi2ExtManufacturingPagePS_t; |
| |
| /*PageVersion should be provided by product-specific code */ |
| |
| #endif |