| /* |
| * pci_link.c - ACPI PCI Interrupt Link Device Driver ($Revision: 34 $) |
| * |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> |
| * Copyright (C) 2002 Dominik Brodowski <devel@brodo.de> |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * TBD: |
| * 1. Support more than one IRQ resource entry per link device (index). |
| * 2. Implement start/stop mechanism and use ACPI Bus Driver facilities |
| * for IRQ management (e.g. start()->_SRS). |
| */ |
| |
| #include <linux/sysdev.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/proc_fs.h> |
| #include <linux/spinlock.h> |
| #include <linux/pm.h> |
| #include <linux/pci.h> |
| |
| #include <acpi/acpi_bus.h> |
| #include <acpi/acpi_drivers.h> |
| |
| |
| #define _COMPONENT ACPI_PCI_COMPONENT |
| ACPI_MODULE_NAME ("pci_link") |
| |
| #define ACPI_PCI_LINK_CLASS "pci_irq_routing" |
| #define ACPI_PCI_LINK_HID "PNP0C0F" |
| #define ACPI_PCI_LINK_DRIVER_NAME "ACPI PCI Interrupt Link Driver" |
| #define ACPI_PCI_LINK_DEVICE_NAME "PCI Interrupt Link" |
| #define ACPI_PCI_LINK_FILE_INFO "info" |
| #define ACPI_PCI_LINK_FILE_STATUS "state" |
| |
| #define ACPI_PCI_LINK_MAX_POSSIBLE 16 |
| |
| static int acpi_pci_link_add (struct acpi_device *device); |
| static int acpi_pci_link_remove (struct acpi_device *device, int type); |
| |
| static struct acpi_driver acpi_pci_link_driver = { |
| .name = ACPI_PCI_LINK_DRIVER_NAME, |
| .class = ACPI_PCI_LINK_CLASS, |
| .ids = ACPI_PCI_LINK_HID, |
| .ops = { |
| .add = acpi_pci_link_add, |
| .remove = acpi_pci_link_remove, |
| }, |
| }; |
| |
| struct acpi_pci_link_irq { |
| u8 active; /* Current IRQ */ |
| u8 edge_level; /* All IRQs */ |
| u8 active_high_low; /* All IRQs */ |
| u8 resource_type; |
| u8 possible_count; |
| u8 possible[ACPI_PCI_LINK_MAX_POSSIBLE]; |
| u8 initialized:1; |
| u8 suspend_resume:1; |
| u8 reserved:6; |
| }; |
| |
| struct acpi_pci_link { |
| struct list_head node; |
| struct acpi_device *device; |
| acpi_handle handle; |
| struct acpi_pci_link_irq irq; |
| }; |
| |
| static struct { |
| int count; |
| struct list_head entries; |
| } acpi_link; |
| |
| |
| /* -------------------------------------------------------------------------- |
| PCI Link Device Management |
| -------------------------------------------------------------------------- */ |
| |
| /* |
| * set context (link) possible list from resource list |
| */ |
| static acpi_status |
| acpi_pci_link_check_possible ( |
| struct acpi_resource *resource, |
| void *context) |
| { |
| struct acpi_pci_link *link = (struct acpi_pci_link *) context; |
| u32 i = 0; |
| |
| ACPI_FUNCTION_TRACE("acpi_pci_link_check_possible"); |
| |
| switch (resource->id) { |
| case ACPI_RSTYPE_START_DPF: |
| return_ACPI_STATUS(AE_OK); |
| case ACPI_RSTYPE_IRQ: |
| { |
| struct acpi_resource_irq *p = &resource->data.irq; |
| if (!p || !p->number_of_interrupts) { |
| ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Blank IRQ resource\n")); |
| return_ACPI_STATUS(AE_OK); |
| } |
| for (i = 0; (i<p->number_of_interrupts && i<ACPI_PCI_LINK_MAX_POSSIBLE); i++) { |
| if (!p->interrupts[i]) { |
| ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ %d\n", p->interrupts[i])); |
| continue; |
| } |
| link->irq.possible[i] = p->interrupts[i]; |
| link->irq.possible_count++; |
| } |
| link->irq.edge_level = p->edge_level; |
| link->irq.active_high_low = p->active_high_low; |
| link->irq.resource_type = ACPI_RSTYPE_IRQ; |
| break; |
| } |
| case ACPI_RSTYPE_EXT_IRQ: |
| { |
| struct acpi_resource_ext_irq *p = &resource->data.extended_irq; |
| if (!p || !p->number_of_interrupts) { |
| ACPI_DEBUG_PRINT((ACPI_DB_WARN, |
| "Blank EXT IRQ resource\n")); |
| return_ACPI_STATUS(AE_OK); |
| } |
| for (i = 0; (i<p->number_of_interrupts && i<ACPI_PCI_LINK_MAX_POSSIBLE); i++) { |
| if (!p->interrupts[i]) { |
| ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ %d\n", p->interrupts[i])); |
| continue; |
| } |
| link->irq.possible[i] = p->interrupts[i]; |
| link->irq.possible_count++; |
| } |
| link->irq.edge_level = p->edge_level; |
| link->irq.active_high_low = p->active_high_low; |
| link->irq.resource_type = ACPI_RSTYPE_EXT_IRQ; |
| break; |
| } |
| default: |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, |
| "Resource is not an IRQ entry\n")); |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| return_ACPI_STATUS(AE_CTRL_TERMINATE); |
| } |
| |
| |
| static int |
| acpi_pci_link_get_possible ( |
| struct acpi_pci_link *link) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE("acpi_pci_link_get_possible"); |
| |
| if (!link) |
| return_VALUE(-EINVAL); |
| |
| status = acpi_walk_resources(link->handle, METHOD_NAME__PRS, |
| acpi_pci_link_check_possible, link); |
| if (ACPI_FAILURE(status)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRS\n")); |
| return_VALUE(-ENODEV); |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Found %d possible IRQs\n", link->irq.possible_count)); |
| |
| return_VALUE(0); |
| } |
| |
| |
| static acpi_status |
| acpi_pci_link_check_current ( |
| struct acpi_resource *resource, |
| void *context) |
| { |
| int *irq = (int *) context; |
| |
| ACPI_FUNCTION_TRACE("acpi_pci_link_check_current"); |
| |
| switch (resource->id) { |
| case ACPI_RSTYPE_IRQ: |
| { |
| struct acpi_resource_irq *p = &resource->data.irq; |
| if (!p || !p->number_of_interrupts) { |
| /* |
| * IRQ descriptors may have no IRQ# bits set, |
| * particularly those those w/ _STA disabled |
| */ |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Blank IRQ resource\n")); |
| return_ACPI_STATUS(AE_OK); |
| } |
| *irq = p->interrupts[0]; |
| break; |
| } |
| case ACPI_RSTYPE_EXT_IRQ: |
| { |
| struct acpi_resource_ext_irq *p = &resource->data.extended_irq; |
| if (!p || !p->number_of_interrupts) { |
| /* |
| * extended IRQ descriptors must |
| * return at least 1 IRQ |
| */ |
| ACPI_DEBUG_PRINT((ACPI_DB_WARN, |
| "Blank EXT IRQ resource\n")); |
| return_ACPI_STATUS(AE_OK); |
| } |
| *irq = p->interrupts[0]; |
| break; |
| } |
| default: |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, |
| "Resource isn't an IRQ\n")); |
| return_ACPI_STATUS(AE_OK); |
| } |
| return_ACPI_STATUS(AE_CTRL_TERMINATE); |
| } |
| |
| /* |
| * Run _CRS and set link->irq.active |
| * |
| * return value: |
| * 0 - success |
| * !0 - failure |
| */ |
| static int |
| acpi_pci_link_get_current ( |
| struct acpi_pci_link *link) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| int irq = 0; |
| |
| ACPI_FUNCTION_TRACE("acpi_pci_link_get_current"); |
| |
| if (!link || !link->handle) |
| return_VALUE(-EINVAL); |
| |
| link->irq.active = 0; |
| |
| /* in practice, status disabled is meaningless, ignore it */ |
| if (acpi_strict) { |
| /* Query _STA, set link->device->status */ |
| result = acpi_bus_get_status(link->device); |
| if (result) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unable to read status\n")); |
| goto end; |
| } |
| |
| if (!link->device->status.enabled) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Link disabled\n")); |
| return_VALUE(0); |
| } |
| } |
| |
| /* |
| * Query and parse _CRS to get the current IRQ assignment. |
| */ |
| |
| status = acpi_walk_resources(link->handle, METHOD_NAME__CRS, |
| acpi_pci_link_check_current, &irq); |
| if (ACPI_FAILURE(status)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _CRS\n")); |
| result = -ENODEV; |
| goto end; |
| } |
| |
| if (acpi_strict && !irq) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "_CRS returned 0\n")); |
| result = -ENODEV; |
| } |
| |
| link->irq.active = irq; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Link at IRQ %d \n", link->irq.active)); |
| |
| end: |
| return_VALUE(result); |
| } |
| |
| static int |
| acpi_pci_link_set ( |
| struct acpi_pci_link *link, |
| int irq) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| struct { |
| struct acpi_resource res; |
| struct acpi_resource end; |
| } *resource; |
| struct acpi_buffer buffer = {0, NULL}; |
| |
| ACPI_FUNCTION_TRACE("acpi_pci_link_set"); |
| |
| if (!link || !irq) |
| return_VALUE(-EINVAL); |
| |
| resource = kmalloc( sizeof(*resource)+1, GFP_KERNEL); |
| if(!resource) |
| return_VALUE(-ENOMEM); |
| |
| memset(resource, 0, sizeof(*resource)+1); |
| buffer.length = sizeof(*resource) +1; |
| buffer.pointer = resource; |
| |
| switch(link->irq.resource_type) { |
| case ACPI_RSTYPE_IRQ: |
| resource->res.id = ACPI_RSTYPE_IRQ; |
| resource->res.length = sizeof(struct acpi_resource); |
| resource->res.data.irq.edge_level = link->irq.edge_level; |
| resource->res.data.irq.active_high_low = link->irq.active_high_low; |
| if (link->irq.edge_level == ACPI_EDGE_SENSITIVE) |
| resource->res.data.irq.shared_exclusive = ACPI_EXCLUSIVE; |
| else |
| resource->res.data.irq.shared_exclusive = ACPI_SHARED; |
| resource->res.data.irq.number_of_interrupts = 1; |
| resource->res.data.irq.interrupts[0] = irq; |
| break; |
| |
| case ACPI_RSTYPE_EXT_IRQ: |
| resource->res.id = ACPI_RSTYPE_EXT_IRQ; |
| resource->res.length = sizeof(struct acpi_resource); |
| resource->res.data.extended_irq.producer_consumer = ACPI_CONSUMER; |
| resource->res.data.extended_irq.edge_level = link->irq.edge_level; |
| resource->res.data.extended_irq.active_high_low = link->irq.active_high_low; |
| if (link->irq.edge_level == ACPI_EDGE_SENSITIVE) |
| resource->res.data.irq.shared_exclusive = ACPI_EXCLUSIVE; |
| else |
| resource->res.data.irq.shared_exclusive = ACPI_SHARED; |
| resource->res.data.extended_irq.number_of_interrupts = 1; |
| resource->res.data.extended_irq.interrupts[0] = irq; |
| /* ignore resource_source, it's optional */ |
| break; |
| default: |
| printk("ACPI BUG: resource_type %d\n", link->irq.resource_type); |
| result = -EINVAL; |
| goto end; |
| |
| } |
| resource->end.id = ACPI_RSTYPE_END_TAG; |
| |
| /* Attempt to set the resource */ |
| status = acpi_set_current_resources(link->handle, &buffer); |
| |
| /* check for total failure */ |
| if (ACPI_FAILURE(status)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _SRS\n")); |
| result = -ENODEV; |
| goto end; |
| } |
| |
| /* Query _STA, set device->status */ |
| result = acpi_bus_get_status(link->device); |
| if (result) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unable to read status\n")); |
| goto end; |
| } |
| if (!link->device->status.enabled) { |
| printk(KERN_WARNING PREFIX |
| "%s [%s] disabled and referenced, BIOS bug.\n", |
| acpi_device_name(link->device), |
| acpi_device_bid(link->device)); |
| } |
| |
| /* Query _CRS, set link->irq.active */ |
| result = acpi_pci_link_get_current(link); |
| if (result) { |
| goto end; |
| } |
| |
| /* |
| * Is current setting not what we set? |
| * set link->irq.active |
| */ |
| if (link->irq.active != irq) { |
| /* |
| * policy: when _CRS doesn't return what we just _SRS |
| * assume _SRS worked and override _CRS value. |
| */ |
| printk(KERN_WARNING PREFIX |
| "%s [%s] BIOS reported IRQ %d, using IRQ %d\n", |
| acpi_device_name(link->device), |
| acpi_device_bid(link->device), |
| link->irq.active, irq); |
| link->irq.active = irq; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Set IRQ %d\n", link->irq.active)); |
| |
| end: |
| kfree(resource); |
| return_VALUE(result); |
| } |
| |
| |
| /* -------------------------------------------------------------------------- |
| PCI Link IRQ Management |
| -------------------------------------------------------------------------- */ |
| |
| /* |
| * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt |
| * Link Devices to move the PIRQs around to minimize sharing. |
| * |
| * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs |
| * that the BIOS has already set to active. This is necessary because |
| * ACPI has no automatic means of knowing what ISA IRQs are used. Note that |
| * if the BIOS doesn't set a Link Device active, ACPI needs to program it |
| * even if acpi_irq_nobalance is set. |
| * |
| * A tables of penalties avoids directing PCI interrupts to well known |
| * ISA IRQs. Boot params are available to over-ride the default table: |
| * |
| * List interrupts that are free for PCI use. |
| * acpi_irq_pci=n[,m] |
| * |
| * List interrupts that should not be used for PCI: |
| * acpi_irq_isa=n[,m] |
| * |
| * Note that PCI IRQ routers have a list of possible IRQs, |
| * which may not include the IRQs this table says are available. |
| * |
| * Since this heuristic can't tell the difference between a link |
| * that no device will attach to, vs. a link which may be shared |
| * by multiple active devices -- it is not optimal. |
| * |
| * If interrupt performance is that important, get an IO-APIC system |
| * with a pin dedicated to each device. Or for that matter, an MSI |
| * enabled system. |
| */ |
| |
| #define ACPI_MAX_IRQS 256 |
| #define ACPI_MAX_ISA_IRQ 16 |
| |
| #define PIRQ_PENALTY_PCI_AVAILABLE (0) |
| #define PIRQ_PENALTY_PCI_POSSIBLE (16*16) |
| #define PIRQ_PENALTY_PCI_USING (16*16*16) |
| #define PIRQ_PENALTY_ISA_TYPICAL (16*16*16*16) |
| #define PIRQ_PENALTY_ISA_USED (16*16*16*16*16) |
| #define PIRQ_PENALTY_ISA_ALWAYS (16*16*16*16*16*16) |
| |
| static int acpi_irq_penalty[ACPI_MAX_IRQS] = { |
| PIRQ_PENALTY_ISA_ALWAYS, /* IRQ0 timer */ |
| PIRQ_PENALTY_ISA_ALWAYS, /* IRQ1 keyboard */ |
| PIRQ_PENALTY_ISA_ALWAYS, /* IRQ2 cascade */ |
| PIRQ_PENALTY_ISA_TYPICAL, /* IRQ3 serial */ |
| PIRQ_PENALTY_ISA_TYPICAL, /* IRQ4 serial */ |
| PIRQ_PENALTY_ISA_TYPICAL, /* IRQ5 sometimes SoundBlaster */ |
| PIRQ_PENALTY_ISA_TYPICAL, /* IRQ6 */ |
| PIRQ_PENALTY_ISA_TYPICAL, /* IRQ7 parallel, spurious */ |
| PIRQ_PENALTY_ISA_TYPICAL, /* IRQ8 rtc, sometimes */ |
| PIRQ_PENALTY_PCI_AVAILABLE, /* IRQ9 PCI, often acpi */ |
| PIRQ_PENALTY_PCI_AVAILABLE, /* IRQ10 PCI */ |
| PIRQ_PENALTY_PCI_AVAILABLE, /* IRQ11 PCI */ |
| PIRQ_PENALTY_ISA_USED, /* IRQ12 mouse */ |
| PIRQ_PENALTY_ISA_USED, /* IRQ13 fpe, sometimes */ |
| PIRQ_PENALTY_ISA_USED, /* IRQ14 ide0 */ |
| PIRQ_PENALTY_ISA_USED, /* IRQ15 ide1 */ |
| /* >IRQ15 */ |
| }; |
| |
| int __init |
| acpi_irq_penalty_init(void) |
| { |
| struct list_head *node = NULL; |
| struct acpi_pci_link *link = NULL; |
| int i = 0; |
| |
| ACPI_FUNCTION_TRACE("acpi_irq_penalty_init"); |
| |
| /* |
| * Update penalties to facilitate IRQ balancing. |
| */ |
| list_for_each(node, &acpi_link.entries) { |
| |
| link = list_entry(node, struct acpi_pci_link, node); |
| if (!link) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n")); |
| continue; |
| } |
| |
| /* |
| * reflect the possible and active irqs in the penalty table -- |
| * useful for breaking ties. |
| */ |
| if (link->irq.possible_count) { |
| int penalty = PIRQ_PENALTY_PCI_POSSIBLE / link->irq.possible_count; |
| |
| for (i = 0; i < link->irq.possible_count; i++) { |
| if (link->irq.possible[i] < ACPI_MAX_ISA_IRQ) |
| acpi_irq_penalty[link->irq.possible[i]] += penalty; |
| } |
| |
| } else if (link->irq.active) { |
| acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_POSSIBLE; |
| } |
| } |
| /* Add a penalty for the SCI */ |
| acpi_irq_penalty[acpi_fadt.sci_int] += PIRQ_PENALTY_PCI_USING; |
| |
| return_VALUE(0); |
| } |
| |
| static int acpi_irq_balance; /* 0: static, 1: balance */ |
| |
| static int acpi_pci_link_allocate( |
| struct acpi_pci_link *link) |
| { |
| int irq; |
| int i; |
| |
| ACPI_FUNCTION_TRACE("acpi_pci_link_allocate"); |
| |
| if (link->irq.suspend_resume) { |
| acpi_pci_link_set(link, link->irq.active); |
| link->irq.suspend_resume = 0; |
| } |
| if (link->irq.initialized) |
| return_VALUE(0); |
| |
| /* |
| * search for active IRQ in list of possible IRQs. |
| */ |
| for (i = 0; i < link->irq.possible_count; ++i) { |
| if (link->irq.active == link->irq.possible[i]) |
| break; |
| } |
| /* |
| * forget active IRQ that is not in possible list |
| */ |
| if (i == link->irq.possible_count) { |
| if (acpi_strict) |
| printk(KERN_WARNING PREFIX "_CRS %d not found" |
| " in _PRS\n", link->irq.active); |
| link->irq.active = 0; |
| } |
| |
| /* |
| * if active found, use it; else pick entry from end of possible list. |
| */ |
| if (link->irq.active) { |
| irq = link->irq.active; |
| } else { |
| irq = link->irq.possible[link->irq.possible_count - 1]; |
| } |
| |
| if (acpi_irq_balance || !link->irq.active) { |
| /* |
| * Select the best IRQ. This is done in reverse to promote |
| * the use of IRQs 9, 10, 11, and >15. |
| */ |
| for (i = (link->irq.possible_count - 1); i >= 0; i--) { |
| if (acpi_irq_penalty[irq] > acpi_irq_penalty[link->irq.possible[i]]) |
| irq = link->irq.possible[i]; |
| } |
| } |
| |
| /* Attempt to enable the link device at this IRQ. */ |
| if (acpi_pci_link_set(link, irq)) { |
| printk(PREFIX "Unable to set IRQ for %s [%s] (likely buggy ACPI BIOS).\n" |
| "Try pci=noacpi or acpi=off\n", |
| acpi_device_name(link->device), |
| acpi_device_bid(link->device)); |
| return_VALUE(-ENODEV); |
| } else { |
| acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING; |
| printk(PREFIX "%s [%s] enabled at IRQ %d\n", |
| acpi_device_name(link->device), |
| acpi_device_bid(link->device), link->irq.active); |
| } |
| |
| link->irq.initialized = 1; |
| |
| return_VALUE(0); |
| } |
| |
| /* |
| * acpi_pci_link_get_irq |
| * success: return IRQ >= 0 |
| * failure: return -1 |
| */ |
| |
| int |
| acpi_pci_link_get_irq ( |
| acpi_handle handle, |
| int index, |
| int *edge_level, |
| int *active_high_low, |
| char **name) |
| { |
| int result = 0; |
| struct acpi_device *device = NULL; |
| struct acpi_pci_link *link = NULL; |
| |
| ACPI_FUNCTION_TRACE("acpi_pci_link_get_irq"); |
| |
| result = acpi_bus_get_device(handle, &device); |
| if (result) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link device\n")); |
| return_VALUE(-1); |
| } |
| |
| link = (struct acpi_pci_link *) acpi_driver_data(device); |
| if (!link) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n")); |
| return_VALUE(-1); |
| } |
| |
| /* TBD: Support multiple index (IRQ) entries per Link Device */ |
| if (index) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid index %d\n", index)); |
| return_VALUE(-1); |
| } |
| |
| if (acpi_pci_link_allocate(link)) |
| return_VALUE(-1); |
| |
| if (!link->irq.active) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link active IRQ is 0!\n")); |
| return_VALUE(-1); |
| } |
| |
| if (edge_level) *edge_level = link->irq.edge_level; |
| if (active_high_low) *active_high_low = link->irq.active_high_low; |
| if (name) *name = acpi_device_bid(link->device); |
| return_VALUE(link->irq.active); |
| } |
| |
| |
| /* -------------------------------------------------------------------------- |
| Driver Interface |
| -------------------------------------------------------------------------- */ |
| |
| static int |
| acpi_pci_link_add ( |
| struct acpi_device *device) |
| { |
| int result = 0; |
| struct acpi_pci_link *link = NULL; |
| int i = 0; |
| int found = 0; |
| |
| ACPI_FUNCTION_TRACE("acpi_pci_link_add"); |
| |
| if (!device) |
| return_VALUE(-EINVAL); |
| |
| link = kmalloc(sizeof(struct acpi_pci_link), GFP_KERNEL); |
| if (!link) |
| return_VALUE(-ENOMEM); |
| memset(link, 0, sizeof(struct acpi_pci_link)); |
| |
| link->device = device; |
| link->handle = device->handle; |
| strcpy(acpi_device_name(device), ACPI_PCI_LINK_DEVICE_NAME); |
| strcpy(acpi_device_class(device), ACPI_PCI_LINK_CLASS); |
| acpi_driver_data(device) = link; |
| |
| result = acpi_pci_link_get_possible(link); |
| if (result) |
| goto end; |
| |
| /* query and set link->irq.active */ |
| acpi_pci_link_get_current(link); |
| |
| printk(PREFIX "%s [%s] (IRQs", acpi_device_name(device), |
| acpi_device_bid(device)); |
| for (i = 0; i < link->irq.possible_count; i++) { |
| if (link->irq.active == link->irq.possible[i]) { |
| printk(" *%d", link->irq.possible[i]); |
| found = 1; |
| } |
| else |
| printk(" %d", link->irq.possible[i]); |
| } |
| |
| printk(")"); |
| |
| if (!found) |
| printk(" *%d", link->irq.active); |
| |
| if(!link->device->status.enabled) |
| printk(", disabled."); |
| |
| printk("\n"); |
| |
| /* TBD: Acquire/release lock */ |
| list_add_tail(&link->node, &acpi_link.entries); |
| acpi_link.count++; |
| |
| end: |
| /* disable all links -- to be activated on use */ |
| acpi_ut_evaluate_object(link->handle, "_DIS", 0, NULL); |
| |
| if (result) |
| kfree(link); |
| |
| return_VALUE(result); |
| } |
| |
| static int |
| irqrouter_suspend( |
| struct sys_device *dev, |
| u32 state) |
| { |
| struct list_head *node = NULL; |
| struct acpi_pci_link *link = NULL; |
| |
| ACPI_FUNCTION_TRACE("irqrouter_suspend"); |
| |
| list_for_each(node, &acpi_link.entries) { |
| link = list_entry(node, struct acpi_pci_link, node); |
| if (!link) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n")); |
| continue; |
| } |
| if (link->irq.active && link->irq.initialized) |
| link->irq.suspend_resume = 1; |
| } |
| return_VALUE(0); |
| } |
| |
| |
| static int |
| acpi_pci_link_remove ( |
| struct acpi_device *device, |
| int type) |
| { |
| struct acpi_pci_link *link = NULL; |
| |
| ACPI_FUNCTION_TRACE("acpi_pci_link_remove"); |
| |
| if (!device || !acpi_driver_data(device)) |
| return_VALUE(-EINVAL); |
| |
| link = (struct acpi_pci_link *) acpi_driver_data(device); |
| |
| /* TBD: Acquire/release lock */ |
| list_del(&link->node); |
| |
| kfree(link); |
| |
| return_VALUE(0); |
| } |
| |
| /* |
| * modify acpi_irq_penalty[] from cmdline |
| */ |
| static int __init acpi_irq_penalty_update(char *str, int used) |
| { |
| int i; |
| |
| for (i = 0; i < 16; i++) { |
| int retval; |
| int irq; |
| |
| retval = get_option(&str,&irq); |
| |
| if (!retval) |
| break; /* no number found */ |
| |
| if (irq < 0) |
| continue; |
| |
| if (irq >= ACPI_MAX_IRQS) |
| continue; |
| |
| if (used) |
| acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED; |
| else |
| acpi_irq_penalty[irq] = PIRQ_PENALTY_PCI_AVAILABLE; |
| |
| if (retval != 2) /* no next number */ |
| break; |
| } |
| return 1; |
| } |
| |
| /* |
| * We'd like PNP to call this routine for the |
| * single ISA_USED value for each legacy device. |
| * But instead it calls us with each POSSIBLE setting. |
| * There is no ISA_POSSIBLE weight, so we simply use |
| * the (small) PCI_USING penalty. |
| */ |
| void acpi_penalize_isa_irq(int irq) |
| { |
| acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING; |
| } |
| |
| /* |
| * Over-ride default table to reserve additional IRQs for use by ISA |
| * e.g. acpi_irq_isa=5 |
| * Useful for telling ACPI how not to interfere with your ISA sound card. |
| */ |
| static int __init acpi_irq_isa(char *str) |
| { |
| return acpi_irq_penalty_update(str, 1); |
| } |
| __setup("acpi_irq_isa=", acpi_irq_isa); |
| |
| /* |
| * Over-ride default table to free additional IRQs for use by PCI |
| * e.g. acpi_irq_pci=7,15 |
| * Used for acpi_irq_balance to free up IRQs to reduce PCI IRQ sharing. |
| */ |
| static int __init acpi_irq_pci(char *str) |
| { |
| return acpi_irq_penalty_update(str, 0); |
| } |
| __setup("acpi_irq_pci=", acpi_irq_pci); |
| |
| static int __init acpi_irq_nobalance_set(char *str) |
| { |
| acpi_irq_balance = 0; |
| return 1; |
| } |
| __setup("acpi_irq_nobalance", acpi_irq_nobalance_set); |
| |
| int __init acpi_irq_balance_set(char *str) |
| { |
| acpi_irq_balance = 1; |
| return 1; |
| } |
| __setup("acpi_irq_balance", acpi_irq_balance_set); |
| |
| |
| static struct sysdev_class irqrouter_sysdev_class = { |
| set_kset_name("irqrouter"), |
| .suspend = irqrouter_suspend, |
| }; |
| |
| |
| static struct sys_device device_irqrouter = { |
| .id = 0, |
| .cls = &irqrouter_sysdev_class, |
| }; |
| |
| |
| static int __init irqrouter_init_sysfs(void) |
| { |
| int error; |
| |
| ACPI_FUNCTION_TRACE("irqrouter_init_sysfs"); |
| |
| if (acpi_disabled || acpi_noirq) |
| return_VALUE(0); |
| |
| error = sysdev_class_register(&irqrouter_sysdev_class); |
| if (!error) |
| error = sysdev_register(&device_irqrouter); |
| |
| return_VALUE(error); |
| } |
| |
| device_initcall(irqrouter_init_sysfs); |
| |
| |
| static int __init acpi_pci_link_init (void) |
| { |
| ACPI_FUNCTION_TRACE("acpi_pci_link_init"); |
| |
| if (acpi_noirq) |
| return_VALUE(0); |
| |
| acpi_link.count = 0; |
| INIT_LIST_HEAD(&acpi_link.entries); |
| |
| if (acpi_bus_register_driver(&acpi_pci_link_driver) < 0) |
| return_VALUE(-ENODEV); |
| |
| return_VALUE(0); |
| } |
| |
| subsys_initcall(acpi_pci_link_init); |